Database Users

Solution of a2dp sound for D810 with itech headset

http://www.megaupload.com/cn/?d=860QYB6S
1. put the "MSI Player for WM5.0 " into the device, Card or storage........
2. active the file inside the WM5.0 and install into the main storage (Storage of the Device)
3. Put the file "MPOBCE" (In the crack folder) into the location where you intalled the Blueplayer. (Normally it is "My device/program file/MSI/BluePlayer)
4. Reset the PPC
5. Turn your MSI enabled bluetooth headset to the pairing mode.
6. Start the MSI Player, select opition, then select device, then refresh, you will find your Bluetooth headset
7. slect your headset and press ok at the right head corner
8. enjoy your a2dp music now.
Remarks:
You may need to disable the PPC power safe function, as it may go to sleep after several mins.then we may need t ouse the screen toggle function to save power.
The software may not hide in the background, since we press ok or x button, it will stop playing, for PPC Phone, i tested my D810 and it can answer phone and dail a phone by pressing the dail button on the device.
Brothers, it is just what i did to listen to the a2dp music for my D810 and my i.tech S35. Other models i have no such resource to test, please feel free to test for us.

Thanks!
Thanks for the info. This worked for my Trinity with the R35 clip as well. It sounds MUCH better than the M$ A2DP on here.

not stable
sound is better
but the program is not stable
and it is only for mp3
can not find the asf, wmv file

Any high freq noice or no bass using R35 clip?

There's a whole thread about MSI BluePlayer. Actually several.
My problem is that I'm trying to port it over to a smartphone and running into many problems that prevent it from even running.

Hi yiuwing_hk
the sound is very good
no this problem
but the program is very not stable
it make my pda phone soft reset many time until not using this software

The program skips a lot on mine as well. Not very stable indeed.

Problems with Bluetooth Stereo Earphones and A2DP

Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru

sesaru said:
Hellow,
I bought one Sony DRBT20NX Bluetooth headphones for my X01HT (SoftBank ROM+Asukal patch for translate to English).
I paired both devices (Hands Free and Wireless Stereo services), but now I don't know what I have to do for listen music from my earphones. I switch on bluetoth on both but music is in he loudspeaker of the X0HT.
Also, I don't know how to make work AVRCP.
Thanks
Sesaru
Click to expand...
Click to collapse
You should have a 'Connect' button on your headset... check your manual. I have a diferent headset, but on mine I short-press the power button and an icon appears at the top of the screen.

This topic has been discussed quite a bit. Please use the forum's SEARCH feature. It's quite useful at times. AVRCP, for one, will not work unless you're using a media player that actually supports it, such as MortPlayer.

@sesaru
i use this headphones on X01HT too. just bought few days ago. if you want engilish manual for this pm me. push play pause in your headphones then open media player. this will open A2DP music mode (Wireless Stereo). AVRCP works with media player i dont know any other work one. imusic and gsplayer dosent work. if you push dark blue bar button you will open HFP (hands free). i have bad news too. i cant get good quality of sound. there is some noise when i listen music with it. user manual write it can be about 2.4 ghz wireless device. like microwave oven, wireless LAN and cordless telephone. all thing is what tokyo is haven of them. you must be 10m far from all of them. and this is mean i must to go 10m away tokyo to listen clear music. if you get good quality pls write me. i hope all this will help you.

Just to confirm i have these headphones and they work with all my windows mobile devices.
My hermes is WM5 but they work fine with my Universal with WM6
Someone already said it but yeah pushing the play pause button re-pairs them for a2dp. I think sometimes i push it twice to get it to do it.

Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59

sesaru said:
Hello,
I fixed when I updated to WM6. But sounds is not good, so I installed Widcomm stack. But I have a new problem.
After install Widcomm stack (I have Windows Mobile VI - BLACK EDITION v1.2 but also happended with WM6 for Hermes LVSW Edition), I can't sync via USB. My computer don't detect the Hermes! Is if like I didn't connect to it.
Any idea?
UPDATE: Fix is here:
http://forum.xda-developers.com/showpost.php?p=1072534&postcount=59
Click to expand...
Click to collapse
Oh!! I just realised now I can't switch on the phone module of the comm manager (>_<) So It doesn't work; I give up.
Can you post where exactly is the fix for this? I'm reading a lot, but I can't find it ...

Hello,
What I did is this:
I installed WM6 ROM in my X01HT and WC Stack. After That, I did this:
1. Close BT Manager and turn BT off.
2. Open registry (need Resco Registry plug-in) and make the following changes (no need of soft reset after them):
[HKLM\Software\Widcomm\BTConfig\Applications\0001]
Change ComPortNumber from 8 to 7
[HKLM\Software\Widcomm\BTConfig\Services\0001]
Change ComPortNumber from 9 to 6
Rename [HKLM\Drivers\BuiltIn\Serial8] to [HKLM\Drivers\BuiltIn\Serial6] and change these subkeys acordingly
"FriendlyName"="Bluetooth Serial Port COM6:"
"DeviceArrayIndex"=dword:00000006
"Index"=dword:00000006
When you have changed this, suspend (off) the PDA for a few seconds and turn it on again. Then goto Bluetooth Settings- Services-Serial Port-Advanced and verify that thet ports that Widcomm is using are 6 & 7
But now I can't switch on the phone App. When I open the Comm App, and push the "Phone" button, it didn't start.
Please, somebody let me know what I'm doing bad.
Thanks
Cesar

Start a program when BT Handsfree is connecting

Hey guys, I could need your help.
I need to find a way to start a program / file (mortscript file) when Bluetooth Handsfree is connected /disconnected (more clear: connecting / disconnecting)
SPB Phone Suite can change profiles automaticly on this event, but Phone Suite cannot run a program when changing a profile ... what a pitty.
It would be very usefull for me because when Handsfree is connected I sit in my car and then I want to start Media Player, TomTom and so on.
Anyone could suggest me ANY solution to start a program upon Bluetooth Handsfree connecting?
I would be glad for every idea ;-)

Maybe search the registry keys of SPB Phone suite to see if you can find one that shows the status of a changed profile (the little yellow asterisk on the profile icon) and then monitor it with mortscript.

A2DPToggle by Teksoft is a nice free today plugin that lets you easily connect/disconnect headset. It also supports execution of desired app after connecting

True, but it cannot autoconnect when bluetooth device in range and detected

Sadly, i cannot get my Philips SHB7100 to autoconnect anyway

Bluetooth connection starts Mediaplayer

I want to use my TD2 with my bluetooth handsfree set, but it starts the mediaplayer, everytime a connection was established. Is there a way to prevent windows mobile to start the mediaplayer in this szenario?
Tube

I have the same issue, but its when pairing with my car stereo (Bluetooth handfree), but it also start streaming music through the line1 connection to my car stereo !!!
Funny I always wanted to do this, but could not, so went the integrated Ipod route, now I can I don't bloody want it.
Anyway, so far no solution

Same story to me. Also issue's bluetooth. when i want to controll my phone with bluetooth, it starts mediaplayer automaticly.

Hello, does anyone have a solution for this problem? my girlfriend has the same problem.

Have you tried disabling the "wireless stereo" (A2DP) service? Go to Comms manager-Bluetooth-Advanced, then tap and hold on the offending item till the menu comes up, choose "edit", then uncheck "Wireless stereo", leaving just the handsfree profile checked.
I'm assuming you're not interested in the stereo music function, of course!

Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo

obsydian said:
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
Click to expand...
Click to collapse
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.

Pete_S said:
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Click to expand...
Click to collapse
Thanks, i've tried every which way so far, but the problem remains, I found the only workaround is to remove any today or touchflo music tabs, at least that stops my TD2 steaming and drawing battery. Instead it opens windows media player, but i've purposely left that empty so at least nothing is being played (i.e. drawing power)
Bluetooth has come a long way, thats so funny you say that, I always wanted to be able to do this, but now my ipod is integrated into my car i don't.

Has anyone figured this out yet? Windows Media Player starts when connecting to the bluetooth factory fitted car kit when I don't want it to !
Is there a reg hack to stop Windows Media Player starting when the pairing takes place on the car's ignition?
Thanks!

T-back's 6.5 BT driver.cab
I had the same problem and I solved it installing T-back's 6.5 BT driver.cab
http://forum.xda-developers.com/showthread.php?t=545737&highlight=t-back+bt+driver
I am not sure whether T-back's 6.5 BT driver.cab has some drawbacks as claimed in the above thread, I am using pocketmusic on my Topaz wm6.5.1 italian paired with a parrot mk6000, still have some minor issues I can live with

[Q] Connect bluetooth device, but let the phone handle it

Hello,
I have a bluetooth headset and I switch the connection constantly between my MP3, phone and laptop (for different reasons).
On my laptop I made a bind, so if I press M10 (I have a gamer keyboard) it auto-connects this headset.
On my MP3 I just have to press a button for 3 seconds and it connects the headset automatically.
On my Nexus One, I have to go to the settings then bluetooth Settings then select the headset.
So I want to make a simple widget that allows me to view all the known bluetooth devices (that have already been paired with the phone once) and be able with one touch to be connected with the chosen device.
Developing an application that needs bluetooth on android is simple but I can't find a way to say to my phone : "Connect to this device already paired but you handle the socket server etc..."
I don't want to right a socket server and handle the sounds being sent to the device... I just want to connect the headset to my phone and let the phone do the rest.
Is is possible ? Because on Android Dev website I didn't find any class, method etc... to do that.
Best regards,
rXp>!<

No answer means can't be done I guess ?