Introduction
I've had my I9100G for more than a week now and to date there's no hint of anyone working on a custom ROM or mod for it. I guess we'll have to resign ourselves to the fact that it's not really a popular model for the regular devs and if we want to get some mods or custom roms on our phones, we have to do it ourselves. I'm currently working on customising my phone, but since I have a day job and little actual experience in Android, it's going to take some time before I can put anything out. So I'm inviting fellow I9100G users to join me in the effort to get some mods developed for the I9100G.
Kernel
Firstly, the kernel. AFAIK, there are two available kernels so far for the I9100G - KH4 (Android 2.3.4) and KI1 (Android 2.3.5). There are rooted versions for both, but as of now only the KH4 one has CWM recovery. In addition, Samsung has released the source code for the KH4, but I'm yet to find the source code for the KI1. I'l like to develop for the KI1, but without a source code and CWM recovery for the kernel, efforts are limited. So I appeal to anyone who knows where we can get the source code for KI1 or can help get CWM on the KI1, please respond!
Mods
So far I've deodexed my phone running on KI1 and managed to get the battery percentage mod on it using the UOT. That one's pretty simple. This weekend I hope to try some more mods like the Advance Power Menu, for one. Once I get that done, I'll share on xda. Appreciate suggestions on what mod we can apply that's useful, but too complicated. If anyone manage to produce mods for your I9100G, appreciate if you could share.
Hopefully once we have a few mods done for the I9100G, we can consolidate them into a custom ROM for our phone.
Let's work together to make our phone better!
I would like to join with little experience on android .
I understand our target is to make custom Rom for the g model, but do you think its we can make it possible to flash other i9100 custom roms with sgx 540 processor ?
Can we have a list of things to start with to acheive that?
Btw, i tried deodexeding and i didn't success. Any advice on this .
Thanks
Sent from my GT-I9100G using XDA App
Hi ss219100g,
We can't flash I9100 custom ROMs into the I9100G. I tried flashing VillainRom onto mine, but I couldn't make it work. Needs someone with more knowledge and experience, I suppose. All I can try right now is try to apply various modes I pick up from xda onto my phone.
So far I've managed to apply the Battery percentage and Advanced Power Menu mods. I'll share them later today. I'm still looking around for the next thing to try. Any suggestions?
For deodexing, I used xUltimate. The link's here:
http://www.droidforums.net/forum/xeudoxus/47283-release-xultimate.html
Basically, I copied the contents of /system/app and /system/framework to \origi_frame\ and \origi_app\, run the tool, then copied the results back onto the phone. Remember to delete the *.odex files in the phone.
hi, i one of the new sgs2g user.
i would like to join and hoping if we could ever make some custom rom for this version.
but i still noob bout android, and this is my first android phone.
i was able to root my dzki1 kernel, using insecure kernel and abd command, but unable to flash cwm recovery, is there way to flash it?
and other thing, what is deodex and odex? i try google,but could not understand
KI1 root kernel with CMW released
hahaboy said:
KI1 root kernel with CMW released
Click to expand...
Click to collapse
Please share the link. TQVM
hahaboy said:
KI1 root kernel with CMW released
Click to expand...
Click to collapse
It's not the one from Odia's thread, is it? I tried that one but it's rooted, but doesn't have CWM.
so meaning to say that until to-date there are no available custom ROM for the GT-I9100G devices??
aidfarh said:
It's not the one from Odia's thread, is it? I tried that one but it's rooted, but doesn't have CWM.
Click to expand...
Click to collapse
Ya, i tried. No cmw... Sad..
Sent from my GT-I9100G using xda premium
Correct me if I'm wrong but I'm fairly sure the only issues you have are with te modem that's installed causing degraded data network service. I can test tonight as I have a 8100g laying around atm.
Scratch that it was the 9100T i was thinking of
Sent from my GT-I9100 using XDA App
i9100G CWM + root : http://forum.xda-developers.com/showthread.php?t=1327509
please show me how to add % power bar...please
endless_sia said:
please show me how to add % power bar...please
Click to expand...
Click to collapse
In short:
1) Root
2) Deodex - use xUltimate
3) Use UOT Kitchen
Sorry I can't give more details. I'm away from my PC right now. Please search for the above tools.
Sent from my GT-I9100G using XDA App
aidfarh said:
In short:
1) Root
2) Deodex - use xUltimate
3) Use UOT Kitchen
Sorry I can't give more details. I'm away from my PC right now. Please search for the above tools.
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
thanks for help, i did it！！！working fine now hehe！！
Anyone could show me where is the basic information to customize/package SGSII firmware? So far, I've been unable to find these basic informations
*only for *I9100G* first custom ROM based on DZKJ2
http://forum.xda-developers.com/showthread.php?t=1341288
Tested working fine with i9100g dzki1
Sent from my GT-I9100G using XDA App
thanx..currently downloading...
Sent from my GT-I9100G using XDA Premium App
have you guys tried flashing any custom themes ?
the only one working for me is battery %
and is there anyone working on an optimized kernel ? MyGKernel is very good but it isn't optimized and not overclockable as far as i know!
ss2i9100g said:
*only for *I9100G* first custom ROM based on DZKJ2
http://forum.xda-developers.com/showthread.php?t=1341288
Tested working fine with i9100g dzki1
Sent from my GT-I9100G using XDA App
Click to expand...
Click to collapse
anyone tried this custom ROM? encountered the yellow triangle?
zarboga said:
anyone tried this custom ROM? encountered the yellow triangle?
Click to expand...
Click to collapse
i did and that's normal, you get a yellow triangle because you installed an unofficial (insecure) rom or kernel, don't worry about it, it doesn't affect the stability of your phone in any way, it's just for saying that you have intalled a custom feature (rom or kernel)!
Related
Hi Everyone,
I'm new to this site and guess it's my first time to start a thread. First of all I've been reading this site for so long and I have learned a lot. Thank you for this wonderful site for teaching me how to install different kernel and roms. Because of this I would like to bring back what I know to the community by letting you know how to install one of my favorite rom the fast and easy way. Thank you Darky for your wonderful rom all credits goes to you.
Please note that this is the easiest way if you don't want to do a lot of hacking in your pc like installing any software like odin just to install Darky's rom.
*** I do not make any guarantee of this type of procedure but I have tried it using 3 different galaxy s as me and my friends has successfully done this procedure, follow at your own risk, this is tested only on Firmware 2.2 Baseband I900XXJPY ***
Let's make this short and here is how you do it.
*** Daryk's rom installation for dummies unorthodox ***
Note: I love the dummies books so don't get offended with this. Just like to name it like this because the book offers fast easy way to learn things.
Step 1: Download z4root, install and root your phone. Click Here
Step 2: Download speedmod one click install in android market and install.
Step 3: Download Darky's Rom configurator in android market and install.
Step 4: Open Darky's Rom Configurator and leave everything default except kernel option just pick speedmod, you can configure anything you want at your own risk.
Step 5: Download Darky's Rom Zip File Click Here look for Normal CWM Version. Transfer it to your internal memory do not extract just transfer the zip.
Step 6. Shutdown your galaxy s.
Step 7: Go to your clockworld menu by clicking the up volume key + on button + home button all at the same time, once you see the Galaxy S screen let go of the buttons.
Step 8: In the menu scroll down to install from zip from sdcard and press your home screen to select.
Step 9: In the menu scroll down to choose zip from sdcard. Then locate where you put your Dary's Rom. Then select it by pressing your home button. This should install Dary's Rom.
Step 10: Once done select the go back menu and then reboot menu on your clockworld screen. Wait a while it takes time to go to your home screen after the first reboot as it's doing some configurations it may take 5 to 7 minutes.
and thats it you should have the darky's rom v 9.3 installed. If there is anything you want to modify in this guide let me know and I will gladly do it for you.
Credits goes out to Darky, My Friends Gimo for helping and for some good inputs, I'm pretty sure that he lurks around here and helps at times and Wilfredo for letting us use his phone as a sacrifice lamb hehehe.
Good comments and proof from people:
cyq1857 said:
yeah,that's what i want to say.
it is very esay for some noob.
thank u for sharing
Click to expand...
Click to collapse
rootusr said:
This was very useful! thank you!
Click to expand...
Click to collapse
shayne44 said:
Confirmed working on GT I9000 with 2.2.3
This post saved me from endless Odin Hangs... and so simple. Thank you
Click to expand...
Click to collapse
Regards,
Rockstarsouth21
yeah,that's what i want to say.
it is very esay for some noob.
thank u for sharing
cyq1857 said:
yeah,that's what i want to say.
it is very esay for some noob.
thank u for sharing
Click to expand...
Click to collapse
No worries we are glad to bring back to the community hehehe.
This will only work on 2.2, speedmod is only compatible with froyo and z4root does not work on 2.2.1
Sent from my GT-I9000 using XDA App
rixsta said:
You should of stuck to voodoo kernel its easier and safer for noobs...
You need to understand how speedmod works...especially after flashing a different kernel after having speedmod...
Click to expand...
Click to collapse
I see but me and friends didn't had any problem with speedmod yet I guess because we haven't replaced or do any harsh configuration on it yet if there is any hehehe but I will take note of your comment, thanks for that.
Mothatt said:
This will only work on 2.2, speedmod is only compatible with froyo and z4root does not work on 2.2.1
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
You could be right that's why I have a disclaimer. I will try to update this as necessary if you have another alternative and you are sure that it works as easy kindly let me know and we will update this thanks.
I appreciate your effort but for sure you need to make it complete or to mention on which devices it worked without any problems...
Just check 1st post from Darky thread and there you will see somewhere the wording:
>> [Guide] Installation Guide for First Time Users
which links to Darky's installation notes at http://darky.ficeto.com/community/i...-installation-guide-for-first-time-users.315/
Maybe you can work on that one explaining in more detail each step for newbies (btw. "noobs" isn't the same as "newbies" and it shouldn't be used only when you are mocking someone)
Good luck,
B.
c4root doesn't work with 2.2.1 roms the step just to install cwm to flash speedmod is kind of useless you can just flash darkys resurrection with odin download darky config and flash the newest version.... all steps together 10min without download....
you could use one click root beforehand so you can use titanium backup... .
guide 4steps :
1 flash darkys resurrection
2 download darky config and configure
3.flash newest darky
4. have fun
mloc33 said:
How do I go about doing that?? lol
Click to expand...
Click to collapse
You get a big hammer and........
Bogu78 said:
I appreciate your effort but for sure you need to make it complete or to mention on which devices it worked without any problems...
Just check 1st post from Darky thread and there you will see somewhere the wording:
>> [Guide] Installation Guide for First Time Users
which links to Darky's installation notes at http://darky.ficeto.com/community/i...-installation-guide-for-first-time-users.315/
Maybe you can work on that one explaining in more detail each step for newbies (btw. "noobs" isn't the same as "newbies" and it shouldn't be used only when you are mocking someone)
Good luck,
B.
Click to expand...
Click to collapse
Thanks for your advice mate. I will follow your advice on explaining things in detail, for the guide however I already got to that guide long before and that is what I used on my own handphone but the alternative steps that I presented is what I and my friends found to be the easiest way.
For the devices on which one works, I have it on my disclaimer in red.
Great info
This was very useful! thank you!
Confirmed working on GT I9000 with 2.2.3
This post saved me from endless Odin Hangs... and so simple. Thank you
rootusr said:
This was very useful! thank you!
Click to expand...
Click to collapse
shayne44 said:
Confirmed working on GT I9000 with 2.2.3
This post saved me from endless Odin Hangs... and so simple. Thank you
Click to expand...
Click to collapse
Looks like you posted just to say thank you, you are welcome guys. Good to see nice people here.
Just a warning so not to confuse people that really are beginners and probably wont realise this... You might want to change the part where it says 2.2 JPY to 2.2.1 JPY at the top of the first post.
zolah said:
Just a warning so not to confuse people that really are beginners and probably wont realise this... You might want to change the part where it says 2.2 JPY to 2.2.1 JPY at the top of the first post.
Click to expand...
Click to collapse
Mate I appreciate your comment could you explain your comments more? what I said in my guide is:
*** I do not make any guarantee of this type of procedure but I have tried it using 3 different galaxy s as me and my friends has successfully done this procedure, follow at your own risk, this is tested only on Firmware 2.2 Baseband I900XXJPY ***
Before we did this our firmware was really 2.2 and baseband is 1900XXJPY.
I would not recommend installing darky's resurrection as it auto lagfixes due to it using voodoo kernel.
Just flash any froyo rom and then speedmod for cwm, then flash your custom rom.
Sent from my GT-I9000 using XDA App
rockstarsouth21 said:
Mate I appreciate your comment could you explain your comments more? what I said in my guide is:
*** I do not make any guarantee of this type of procedure but I have tried it using 3 different galaxy s as me and my friends has successfully done this procedure, follow at your own risk, this is tested only on Firmware 2.2 Baseband I900XXJPY ***
Before we did this our firmware was really 2.2 and baseband is 1900XXJPY.
Click to expand...
Click to collapse
JPY is 2.2.1 which is what speedmod kernel is compatible with.
JPY isnt 2.2 thats completey different... 2.2 was for baseband JPM etc in earlier versions...
I think that if somebody tried to flash speedmod kernel onto 2.2 they would run into problems.
Also mate just to pick up on something else... Im not 100% sure on this but i dont think that z4root works on 2.2.1 JPY it only works on 2.2 ( or that was my understanding of it a long time ago... it could have been updated somehow to work on 2.2.1 )
Superoneclick root is the most renowned way to root a 2.2.1 device...
Not trying to rape your thread or anything mate... Im just trying to give some constructive feedback to make this thread as accurate as possible.
If it wasn't for these threads a lot of people would get no where.
There are loads of different ways to get darkyy's rom onto a your device from flash cf-root for 2e and installing rom manager from the market for CWM or flashing speedmod kernel for the CWM built in and then flashing the CWM version of the rom but if your looking for the FASTEST way, it would have to be going through ressurection if im completely honest.
Well that the speedmod kernel dont work on 2.2 is definitley wrong! I am on stock 2.2 and i am using k13c - works nicely. Also in the speedmod thread he states that the kernel works with every 2.2 or 2.2.1 rom.
Sent from my GT-I9000 using XDA App
Peacemanibk said:
Well that the speedmod kernel dont work on 2.2 is definitley wrong! I am on stock 2.2 and i am using k13c - works nicely. Also in the speedmod thread he states that the kernel works with every 2.2 or 2.2.1 rom.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
- Based on JPX Android 2.2.1 kernel source
- Works on all stock Froyo 2.2 and 2.2.1 ROMs and popular custom ROMs
Thanks for the correction i apologise.
I was just going on the fact i knew it was based on 2.2.1 firmware, but as you say yes it does work on 2.2 aswel.
Thanks for clarifying that. My mistake
Would this work on GT-I9000 with Firmware version 2.2?
Sorry - newbie alert here:
My phone's "settings->About Phone" screen says:
Model Number: GT-I9000
Firmware version: 2.2
Baseband version: I9000HVJP3
Kernel version: 2.6.32.9 [email protected] #6
Build number: FROYO.HVJP4
It's a phone from Vodafone Australia which was upgraded from the original 2.1 to the official 2.2 via Kies then root'ed.
I'm a bit confused by the arguments here about 2.2.1 vs. 2.2 - Do you expect these instructions work on my phone?
Also - if I execute them - am I correct to understand that this only installs a new ROM but the kernel and the Android version will stay the same, allowing me to retain the Navigon application which came with the phone? (I hardly use it but plan to use it when I travel abroad and don't know what kind of network coverage I'll have).
Thanks!
Hey all,
I wondered I am beggining to get bored of those Stock based ROM's out there
I have A R800i Locked bootloader and no money .
So This is a Disscussion on weather to make a ROM for GSM as well as this I will Implement some Tweaks ,
If I do release one here are the requirements:
CWM 5 (ClockworkMod Recovery)
Stock 2.3.4 No Tweaked Firmware Official FW!
Please Post If I should I can start tonight UK time :0
Definitely make one!
we're not exactly spoilt for choice when it comes to this phone and room choice
Sent from my R800i using xda premium
Please do, there is a need.
Mod it for speed and space if possible. We need a minimalist rom for gsm locked bootloaders like that cola one for cdmi
Theme it ICS, Remove all bloatware.
Ok Guys I understand Cola is good But I will Use ADW launcher for speed and etc Currently I am Developing It I will Post Some Screenshots,
This is in Beta so Everything is working Calls Etc.
Do you have root both of you?
Ok You guys Have anymore requests E.g Mods:
Bravia Engine
MegaBass
Themes launchers etc apps (only free ones0
supercharger would be nice. Yes i have root and im ready to test
Ok Mate thanks for Support you can be in Credits for BETA testing
What Build are you running? It is made on Stock 2.3.4 .42 build?
Make a Backup!
Is there anyway to get the Tmobile theme manager implemented into this ROM or does it only work in CM? I like the simplicity off just swapping themes in and out
Sent from my R800i using xda premium
I will try but I dont think I will be able to cos its a Unsigned Package!
Im on that build only its r800a. Can switch to r800i easy enough though. Im backed up via titanium and recovery
Ok mate there is a link in the Dev section ok flash R800i .42 and Install root and cwm ok gtg school tmoz
MAybe you can help us with locked bootloaders overclock. Everyone says it can be done but it needs a willing developer.
RacecarBMW said:
Maybe you can help us with locked bootloaders overclock. Everyone says it can be done but it needs a willing developer.
Click to expand...
Click to collapse
There exists a kernel for locked X10 phones. Like Racecar said, if a developer is willing, could you help?
Here's a link to the thread of this kernel I mentioned.
(Don't flash it just to be dumb... It's just proof of it's existence.)
http://forum.xda-developers.com/showthread.php?t=1226826
According to the instructions, you just flash it via CWM. EVERY Xperia Play user, even the locked Verizon models, now have access to CWM recovery.
Implement baseband .36 for the best radio
I'm unlocking bootloader this week somtime and will start on porting Cola to GSM.
Cool Hogwarts
Sent from my R800i using XDA App
It already has the baseband 36 libs
Sent from my R800i using XDA App
cola6 is gd but a full screen camera would be nice. how abt including amarullz script for the internal memory boost. with all the tweaks like bravia included. these things would be nice. would love to see something new cos i keep getting back to stock as i find it more "appealing". will test yur rom once its out. cheers
The Rom is out in the development section!
Sent from my R800i using XDA App
For any of you guys out there awaiting the ICS update, don't bother. Have a look for the Paranoid Android ROM thread, truly amazing and shows you what this device is really cape able of!!!
Sent from my GT-N7000 using XDA
Redundant post is redundant. Congrats on your first post/thread here...
Technically that's ICS.
Sent from my GT-N7000 using xda premium
basically that rom is from ICS base source
parisayo said:
For any of you guys out there awaiting the ICS update, don't bother. Have a look for the Paranoid Android ROM thread, truly amazing and shows you what this device is really cape able of!!!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
LOL noobs you gotta love them
overwhelmed with the hybrid ROM.
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Do a poll and kingdroid will win xD
Sent from my GT-N7000 using xda premium
Arrancamos said:
Do a poll and kingdroid will win xD
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
does the kINGdROID rom effected by brick bug?
TMT also awesome
_A.T.Omix_ said:
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Click to expand...
Click to collapse
Paranoid uses CM9 kernel, therefore it is safe.
Couldn't agree more
Couldn't agree more. Keep up the good work...
_A.T.Omix_ said:
Is the kernel of paranoid safe? I am on LPY right now, don't want to brick.
Click to expand...
Click to collapse
Looks like Paranoid is CM9 based so nearly no bricking risk there
Kingdriod is based on an official Kernel, so big risk of bricking .
I could be quite wrong here though.. do your own research.
senectus said:
Looks like Paranoid is CM9 based so nearly no bricking risk there
Kingdriod is based on an official Kernel, so big risk of bricking .
I could be quite wrong here though.. do your own research.
Click to expand...
Click to collapse
Paranoid is totally safe and the best thing I ever did to my Note. It is CM9 based.
Try it out, you will never go back!
Sent from my GT-N7000 using xda app-developers app
parisayo said:
Paranoid is totally safe and the best thing I ever did to my Note. It is CM9 based.
Try it out, you will never go back!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Reading the first few post in the paranoidandroid thread...
The install looks very intimidating for new flashers.
And to complicate things, there is a list of prerequisites and DONT'S. IF.......
So Im freaked out by it all, but do want to install it..
My experience so far is to.. D/L the German XXLPY and install via PC Odin.
Then root, then Speedmod Kernel..
NOW.. the PA ICS hybrid instructions warns against flashing with ICS already installed with certain kernels.....
I got lost and confused...
{Q} Can I just flash PA ICS Hybrid over what I have got already??
or {Q} do I have to go back to GB and a GB kernel first??
thanks for helping out a new flasher.
And dont forget to lecture me to read..read..read.. research....
I know that & but I will need reminders (without links as wel)l...
thanks again,,,
jimmbomb said:
Reading the first few post in the paranoidandroid thread...
The install looks very intimidating for new flashers.
And to complicate things, there is a list of prerequisites and DONT'S. IF.......
So Im freaked out by it all, but do want to install it..
My experience so far is to.. D/L the German XXLPY and install via PC Odin.
Then root, then Speedmod Kernel..
NOW.. the PA ICS hybrid instructions warns against flashing with ICS already installed with certain kernels.....
I got lost and confused...
{Q} Can I just flash PA ICS Hybrid over what I have got already??
or {Q} do I have to go back to GB and a GB kernel first??
thanks for helping out a new flasher.
And dont forget to lecture me to read..read..read.. research....
I know that & but I will need reminders (without links as wel)l...
thanks again,,,
Click to expand...
Click to collapse
My situation is exactly the same .. i want PA badly but im confused like you .. so pls guys can we flash PA rom over our stock German XXLPY with speedmod kernel ?? THANK YOU
Why do you find it difficult to return to gb? This is the most secure way
thehackersz said:
basically that rom is from ICS base source
Click to expand...
Click to collapse
Then it's never been better than my ICS he he.
It's great as far as i can see on the video. But no S-Memo for me is a big no. I know there are alternatives but I can't live without the stock S-Memo
thehackersz said:
does the kINGdROID rom effected by brick bug?
TMT also awesome
Click to expand...
Click to collapse
Kingdroid it's pretty bad, it has very very dirty stuff and useless tweaks, its buggy and drive you crazy after 1 day of use.
The idea of that rom is good but "more" not means better so that guys need to do a clean rom instead a rom full of useless crap.
gam3r20 said:
My situation is exactly the same .. i want PA badly but im confused like you .. so pls guys can we flash PA rom over our stock German XXLPY with speedmod kernel ?? THANK YOU
Click to expand...
Click to collapse
It's not confusing as long as you get the concept right. Just remember one thing.
All stock Samsung ROM are dangerous and you do not want to flash anything over them.
All AOSP ROM are safe and you can flash over them.
So what happens if you are on Samsung official like LPx, LBx, etc ? First, flash a gingerbread ROM with no wipe and then proceed with the usual flash procedure. This applies for ANY ROM that you wanted to flash not only Paranoid ROM.
Sent from my GT-N7000 using xda premium
which is the best rom for a500 and how can i root my a500 on android 4.0.3
Sent from my A500 using XDA Premium HD app
The rom that shall not be named is the best one IMO. Not taking away from the devs here, but you can only push so far on modified stock (still think what you guys do out of the kindness of your hearts rocks though!).
As for rooting, you have 4.0.3 or you want to root and get 4.0.3? The processes are different for the different android versions, but check the development forum for this. There are some great guides on how to root from any official version.
Really, dude, both of these issues have been beat to death in literally hundreds of threads. Do a search on the development side of the forum.
don't reply
I don't care if it is the billionth time it is asked, that is why the forum is here. if you don't want to answer don't but don't ding someone for asking.
I have successfully rooted, tried two root tools, I have to look on the other computer to see what the one that was successful was, will try and get back to you on it.
there are many root tools though, don't be afraid to try em... i found to put the tool in the root directory of your computer seems to work best and make sure you use vista or xp, windows seven can be trouble.
am also looking for rom info myself, so if you find a good one let me know....
[ROM]Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma(3Gusb)-(16-Okt-2012)
FLEXREAPER-RELIX_GT_Rev1.1 ANDROID 4.0.3 :good:
arkitektkopi said:
[ROM]Jelly-Bean_4.1.2_CM10-FLEX_v6supercharged_Aroma(3Gusb)-(16-Okt-2012)
Click to expand...
Click to collapse
+1
Smoothest ROM I have used so far.
ROM]ICS-FLEXREAPER / RE-FLEXxx-ShellSHOCK_AROMA(20-Okt-2012) is also awesome!!!!!
arrish4 said:
which is the best rom for a500 and how can i root my a500 on android 4.0.3
Sent from my A500 using XDA Premium HD app
Click to expand...
Click to collapse
If is on 4.0.3, there is and easy way to root it. Do file, plug tab, run the app. Rooted.
If you want Roms. Install adb then then apx tool.
Adb install 20 min. The rest in 10 min. Now i can say this because i know. Last week. 1 hr to do each one.
jelly bean
Strikkt said:
+1
Smoothest ROM I have used so far.
Click to expand...
Click to collapse
Does it update the kernel? Any problems going from 4.0.3? Are you over clocking with that Rom. Have not been able to find the download link for it, do you have it. I was also wondering when you flash a new Rom do You lose all your apps and have to reload, thanks for info.
Any ROM of Civato's. Everything he develops is rock solid
Sent from my SAMSUNG-SGH-T769 using xda premium
AOKP is worth a shot
Off all the ones that I flashed, I thought the AOKP ROM was very interesting
ROM| WIP| AOKP JellyBean 4.1.2 Unofficial for acer a500 [JB-Milestone 1][Nov-19]
Personally, I am currently running the CM10.1 4.2.1 Weekly build as my daily driver and quite enjoying it
cm10 4.0.4
Hi,
I am having I5801 with DXJPC ROM installed in it, facing issue like hanging phone and slow performance.
I want to move it to DDJP6 version of ROM
Could you please suggest the process to do it....
And if any other upgrade available, please suggest to move onto.
http://forum.xda-developers.com/showthread.php?t=1372414
p.s.: search before opening new thread, please
Hi,
I have already updated to 2.2 from 2.1 using ODIN only..
i am on DXJPC froyo ROM now from eclair
My query is if i change ROM to DDJP6, is there any challenge / known issues..???
Could some share their technical expertise or their experience of doing so
P.S - I searched for it, couldn't find anything relating to it
discoversumit said:
Hi,
I have already updated to 2.2 from 2.1 using ODIN only..
i am on DXJPC froyo ROM now from eclair
My query is if i change ROM to DDJP6, is there any challenge / known issues..???
Could some share their technical expertise or their experience of doing so
P.S - I searched for it, couldn't find anything relating to it
Click to expand...
Click to collapse
could anyone provide any update on this...?
Q- I am using for I5801DXJPC now, having issues like slow performance, almost no battery backup; want to move to I5801DDJP6, is there any challenge moving into it. OR i will be at same stage after moving from I5801DXJPC to I5801DDJP6...?
Or shall i move to another ROM you could suggest.
please respond
Purumod v3 is my favourite 2.2 rom so I suggest you use thay
Sent from my GT-I5800 using xda app-developers app
discoversumit said:
could anyone provide any update on this...?
Q- I am using for I5801DXJPC now, having issues like slow performance, almost no battery backup; want to move to I5801DDJP6, is there any challenge moving into it. OR i will be at same stage after moving from I5801DXJPC to I5801DDJP6...?
Or shall i move to another ROM you could suggest.
please respond
Click to expand...
Click to collapse
there are lots of roms to look for if u need performance and added features go than for custom rom http://forum.xda-developers.com/showthread.php?t=1234591 as they are fast but don't aspect big difference.
tanmoyc said:
there are lots of roms to look for if u need performance and added features go than for custom rom http://forum.xda-developers.com/showthread.php?t=1234591 as they are fast but don't aspect big difference.
Click to expand...
Click to collapse
Thanks for your comments
MicroGeek said:
Purumod v3 is my favourite 2.2 rom so I suggest you use thay
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
thanks dear... but i havnt heard much of it about this ROM,
i am thinking for CyanogenMod 7.2 ALPHA 8.3 or Kyrillos 10.6 one... :good: