This is just a tip to other Newbies (or others that didn't think of it :-D )
After I started playing with my rooted legend and ClockWork MOD I got sick of downloading CWM from the Market then downloading the different recovery roms each time, I tried a new rom or something else.
My simple solution was to keep an update.zip (2.5.0.7) in the root of sd (most updates i've used so far seam to need amend-stript or don't like new version) and also keep other versions of CW recoveries with file name + version.zip ie update5.zip update3.zip etc on sdcard, once i boot into CWM 2.+ I can then load any other version I need too via the update from zip file option, so if i have done a backup using say 5.0.2.0 I boot into 2.+ then load the update5.zip hey presto 5.0.2.0. ...
Update to this thread, now that HTC has released its unlocked bootloader, we now have to flash the s-off img. File for recovery as the update.Zip doesn't work anymore. However you can still open the update.zip after you have already loaded recovery.
Related
I've been having a lot of problems getting my tmobile vibrant into cwm recovery,
i flashed recovery through cwm and selected boot into recovery. when i get into recovery and select reinstall packages, I get mixed messages.
i tried flashing cwm with the initial update.zip it puts on the sd, little bar shows up at the bottom and gets about 1/3 of the way, and says
E:/failed to verify whole file signature.
installation aborted.
Went into clockworkmod folder on my computer retrieved the recovery-update.zip, renamed it update.zip. I tried putting both of these files on the sd card root, /external_sd, phone internal memory and the sd folder on the phone. nothing works
Am i doing this wrong?
Have you tried the fix permissions option in CWM? I have had strange errors like that before and that helped.
can you be more specific please?
it says an error occurred while attempting to run privileged commands.
search for 3e modified recovery in the dev section
reply
that might help me if i knew what it meant. im just learning about this stuff but it seems to be getting more and more complicated all the time
I guess this post is dead.
Thanks for the help guys.):
Go into SuperUser and see if it runs. It sounds like you lost root. If that is the case you may need to re-root it.
What do you mean you flashed recovery through cwm? If you can already use cwm you shouldn't have a problem.
Have you tried downloading ROM manager from the market? You will need to have your phone rooted to install cwm through ROM manager.
U r probably on the 3e recovery and have to get back the 2e recovery don't odin back to 2.1
Sent from my SGH-T959 using XDA App
Here is the tutorial: http://forum.xda-developers.com/showthread.php?t=925400
Run a search before posting and you will most likely find the answer! :]
It works for KA7 too.
You probably just need the steps of putting it into shell root > script from 3e recovery to 2e recovery, then you're good to go.
I just odined a new kernel and after that, my phone went into cwm recovery and i flashed nero v.3. everything works great.
Hey I downloaded a custom rom of these forums. I put it in the root of my sdcard with the name update.zip and booted into recovery and told it to install update.zip. I got an error saying the file didn't exist. I'm not sure what I'm doing wrong. I thought that's how I did it with my Droid X
Custom ROM's need to use ClockworkMod recovery found here. http://forum.xda-developers.com/showthread.php?t=1126364
Update.zip only works with stock factory Rom. For the most part anyway.
I use clockwork recovery and if I rename it to something other than update.zip i can't find it. It seems to use ROMs and clockworkmod as directories, I tried putting the zip in there and it doesn't show up in clockwork.
is it possible to replace official recovery with clockwork recovery in stock rom?
i have a goldcard but it does not let me sappimg roms different from my stock rom.
i donot have a cw or amon recovery. i need the recovery to get the engineering spl.
since only my stockrom can be sappimg'ed, how can i get the clockwork recovery by replacing My stockrom's original recovery with the cw/amon recovery??
can it be done??
thanks.
-------reason...
i had 3.22 radio, but i flashed another stockrom (htc europe 3.05 rom) which was devided in rom and rom1 files. i flashed rom1, sys,userdata,recovery. rom file had hboot,boot and radio 6.35.
i was unable to flash rom file (hboot,boot and radio 6.35) because when radio starts updating, the screen starts changing colours to grey for, like, 40 minutes (does this normally happen??)
now i have old radio, incompatible hboot/boot file- to correct it, i need Recovery
---EDIT---
MY phones stuck in hboot mode, i have no other option except goldcard, but what about what i have written, does it work?
Download rom manager from the market, although depending on your rom it may not be available (android 2.1) if not download it off Google by typing, rom manager.apk. Once installed you can add the new clockwork recovery or the RA recovery via the application, they both work fine. Hope that's helped!
Sent from my HTC Hero using XDA Premium
You can, but i suppose that Amon Ra is better than others.
I would also suggest same solution as Tenpin wrote. Rom manager and it allows to change recovery (I suggest Amon Ra as well).
If you do get your phone sorted, remember the stock Rom reflashes the stock recovery every time you shut your phone down.
Also, I believe if you extract the proper signed Rom.zip from the ruu and put it on your sdcard and press volume down when in fastboot, it should search for and flash the Rom.zip. At least then you will have a Rom to boot into to flash a new recovery.
My old hero messed up once too, I would seriously recommend flashing the s-off bootloader, makes recovering from errors such as this so much easier.
Sent from my GT-I9100 using XDA App
OK, so I flashed one of the new leaked ICS stock ROMs and it appears that everything is ok. I'm digging all of the features including the panoramic camera. I decide that I want to put on Taboonay for a little flavor. I try to boot into recovery and this is what I get:
Erasing cache before SD update
SD update cmd: recovery
--update_Package=SDCARD:update.zip
Booting recovery kernel image
(IN RED) Recovery verified failed
Yes, I tried to flash a recovery image through the ACER recovery install and the ROM Manager. Both of them flashed an image with no problem, until I actually tried to flash an image.
My question is this: How do I flash a recovery image if my bootloader is busted?
I do have ADB access , so it there a way I can copy a recovery image file directly onto the A500?
I appreciate the help!
xodus1914 said:
OK, so I flashed one of the new leaked ICS stock ROMs and it appears that everything is ok. I'm digging all of the features including the panoramic camera. I decide that I want to put on Taboonay for a little flavor. I try to boot into recovery and this is what I get:
Erasing cache before SD update
SD update cmd: recovery
--update_Package=SDCARD:update.zip
Booting recovery kernel image
(IN RED) Recovery verified failed
Yes, I tried to flash a recovery image through the ACER recovery install and the ROM Manager. Both of them flashed an image with no problem, until I actually tried to flash an image.
My question is this: How do I flash a recovery image if my bootloader is busted?
I do have ADB access , so it there a way I can copy a recovery image file directly onto the A500?
I appreciate the help!
Click to expand...
Click to collapse
Well, not sure if I can get you up and running. This is going to depend on if you followed traditional installation instructions that are posted on every thread that contains a Rom.
But first, let's cover where you went wrong. And that would probably be when you went back to Recovery. It seems, you didn't hit Vol - and PWR, but instead selected Vol + and PWR. And as such, it tried to run an update.zip file, which is a no-no. This resulted in a corrupted image.
Secondly, Rom Manager is a phone app. This will in most cases, bork your tab.
First, I would try Acer Installer (newest version) and try to install RA Recovery. If you were using CWM before, you probably can't flash it again.
If that doesn't work, then you will have to roll back from ICS, and you will need your original UID number. Hopefully you wrote this down somewhere. If you were using RA Recovery, you will find the UID number in the UID.txt on your SD Card in the Recovery folder (if you made a system backup before flashing ICS roms). If you were using CWM, well, it might be buried in one of the .img files in the clockwork folder (again, if you made a backup before flashing ICS). You will have to de-compile the image files to find it (hopefully).
If your ADB seems to be working, you may want to push the RA Recovery;
http://forum.xda-developers.com/showthread.php?t=1459821
If you have your original UID number, then you may want to try this;
http://forum.xda-developers.com/showthread.php?t=1522384
or this;
http://forum.xda-developers.com/showthread.php?t=1516012
Hope you get it going. From what I have seen, mostly when the people lose their recovery, they were using CWM. Haven't heard of any losing it when using RA Recovery. But anyhow, use Acer Recovery first, and try the RA Recovery.
Got ICS, OTA (download) installed that no problem, downloaded the acer usb drivers and used ICS Root (blackthund3r). Now i want to install LightSpeed 4.4 (i know theres a newer version) I renamed it update.zip and did the power button + V- button but it says invalid image.
Now im a bit confused cause all this android stuff is new to me, I have the acer recovery installed but im not sure what to do with it. Tried renaming it to recovery.img it says it is flashing but nothing happens.
Kinda lost at what to do or how to get this rom working.... if someone could point me in the right direction it would be sweet
Fox
foxorroxors said:
I renamed it update.zip and did the power button + V- button but it says invalid image.
Fox
Click to expand...
Click to collapse
Yep. That was pretty n00b of ya (that little trick only works on signed official roms, and even then, only ify-ify)
Check this thread. It has the tools you need.
http://forum.xda-developers.com/showthread.php?t=1622425
You can skip the part about installing an ICS rom and rooting. You already did that. You need to do steps 1, 2, (partial 4) 5 or 6 basically.
Note after you rooted. Look at step 4 and delete the required file like it says, before going to steps 5 or 6. You have an option on which package to use. Personally, I like the exe package. But your choice.
This installs patched b-loader and CWM recovery so you can flash ICS only Roms.
Easy
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
urbie47 said:
As you've Acer Recovery why the difficult way ? Just choose "Download / Install Roms, tick Lightspeed 4.4 in the left column, hit download and then install.
(i've version 2.74)
Fast, easy and no problems. I flashed Flexreaper 14 (now replaced by Flexreaper ICS RF1) and i can recommend it, the Rom and the way of flashing it.
Click to expand...
Click to collapse
Acer recovery is fine if it'll install the patched Bootloader.
However, it doesn't make a user get his UID number, which is essential in case something happens in the future. Without your UID, you're basically toasted Or you're in for the long haul in figuring out how to unbrick a tab.
help
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
ores992 said:
I need help for boot loader.I tried to put ICS boot loader v3, I didn't success and now I can't put another rom(I have ICS for A500 but I use A501 and it doesn't work 3G modem).How I can put other rom?
Erasing cache before SD update...
SD update cmd recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Recovery verified failed...
Click to expand...
Click to collapse
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Moscow Desire said:
You can't run that update.zip like you did. You got the error message.
Can you still boot into the 500 Rom? If so, you need to install a CWM Recovery before you can flash custom Roms. Look at the link below for instructions for CWM installation.
If you can't boot into your System, then you will need to do everything again.
You should still have your UID number when you tried to NVFlash the ver3 bootloader (I hope you wrote that number down)
You need to probably re-install the ver3 bootloader again as your attempt to install an update.zip messed things up. You just can't do it that way. So go here;
http://forum.xda-developers.com/show....php?t=1622425
Only this time, follow the instructions. You need to install CWM recovery. This is how to flash Roms, not putting update.zips on the SD card. And BTW, you should delete that update.zip from Your EXT SD Card. It will cause problems.
Also note, in those instructions, if you installed the FULL 500 ROM, you must delete a certain boot-p file before you install CWM Recovery. Or else it will delete it when you reboot the tab. Again, read the instructions.
The above steps install a 500 rom. The 500 DOES NOT have 3g like a 501. This is why you had no 3g. You have to install a 501 ICS Rom after, through CWM Recovery, and, currently, I have the only ICS Rom for the 501. And... it's a Beta release from Acer. But it works ok mostly.
Read the instructions, and understand exactly what you are doing. Also remember, with ver3 ICS Bootloader, YOU CANNOT INSTALL HC BASED ROMS without going back to an HC based bootloader. ICS Roms only. (unless you want to go back to stock).
Click to expand...
Click to collapse
Thanks, but that link is dead
ores992 said:
Thanks, but that link is dead
Click to expand...
Click to collapse
Yeah, XDA did some cleaning up overnight. Try it now;
http://forum.xda-developers.com/showthread.php?t=1622425
MD