Database Users

Clockwork Mod recovery mode ??????

I am having a problem accessing clockwork mod recovery mode, no matter what process i try it consistently takes me to android recovery instead.
info:
samsung fascinate
rooted
Did odin flash back to stock
Did factory reset back to stock
Did software ota update to the following specs:
HV i500.04
M# sc i500
Firmware 2.1 update 1
Baseband S: 1500.04VD101
Kernel 2.6.29
Build SCH i500 DH101
Installed CWm Recovery from market
Installed Asto file manager from market
Installed Titanium backup from market
Opened CWM application
Went through root permissions dialogue
Flashed CWM recovery to 2.5.1.0
Next i clicked on BACK UP ROM which reboots me into Android Recovery Mode and gives me the standard 4 options for the fascinate:, plus it says installation was aborted:
1.After failing to find update package
2. open update package
3. verify update package
At this point i click on the home button and reboot system now.
Next i try flashing a different CWM Recovery version to 2.5.1.1 , 2.5.1.3 , 2.5.1.4 , all resulting in and error message, so i am still using 2.5.1.0
Next i try toclick on manage and restore backups but there are no backups listed even thouigh i did back up Rom earlier.
next i try to install the Geeknik ROM( Stupidfast v1.23(D101) from the Download ROM section.
I click OK to dialogue box that ask do i want to Down Load Rom
The Stupidfast ROM download starts and finishes
Notification bar says download is complete so i click on notification bar and this takes me to dialogue box which asks do i want to back up existing rom and wipe data and cache . i say yes to both and click OK.
Next dialogue box asks do i want tot reboot. i click Ok
i am then taken back to Android System recovery.
No matter what i do in Clockwork Recovery i always end up back at Anroid System Recovery. i have tried all different scenarios -debugging checked.debugging unchecked,clear cache, dont clear cache, back up rom,dont back up rom, usb connected, usb unconnected, Titanium in,titanium out. watched all different you tube videos on subject.
sorry this was so long. i didnt want to miss any answers to any question any of you might have if at this point you want to offer any help. thanks in advance.

You have to flash CWM with Odin before you can use it. Can't just install from the market or ROM Manager

Kevin, Thanks for your response to my question.
i thought i already flashed CWMRecovery from within ROM Manager. it is the first option at the top of CWMRecovery, also it states under that first choice that my latest recovery id Clockwork Mod 2.5.1.0.
If i scroll down to the bottom of CWMRecovery the last choice shows all of the CWM Recoveries. Recovery 2.5.1.0 is listed at the bottom and is the only one i can flash/install.
In both instances it says that i have flashed this version(2.5.1.0) of CWM Recovery.
I will try whhat you are suggesting and thanks again for the help, it is appreciated

Kevin , I followed your instructions and flashed the CWMrecovery.tar file with Odin3_1.3 and everything is as it should be. The funny thing is (at least to me) that the CWMrecovery version that is listed when i am in recovery mode now is CWM version 2.5.1.0, which is the same version that i flashed within rom manager. Kind of confusing but at least i am where i want to be. Thanks again for the help.

Yeah, it's just one of the quirks with the Fascinate. Unlike most devices, just flashing Clockwork with ROM Manager only puts the update.zip on your SD card. Using Odin to flash the .tar file installs the recovery, so both parts are needed.

where i need to put CWMrecovery.tar in ODIN in which section PDA/PHONE/CSC? 1nx

You only flash things in PDA section, doing otherwise will screw up your phone
Sent from my Fascinate - DJ05/SuperClean/Adryn's 12/30

?
Im kinda new to all this stuff and just wanted to get some step by step stuff if you dont mind. I rooted my Fascinate tried clockwork mod wouldnt work when i tried to backup after downloading the recovery thing and when i read this you guys said something about Odin so I went to appbrain and downloaded tuxility but now im lost on what to do. Maybe something step-by-step would be good. Really appreciate it! (ps: I know im kinda slow but if you wouldnt mind...)

The stock recovery does not allow us to run unsigned zips. Thus, we must flash the CWMrecovery.tar to patch recovery to allow us to run these unsigned zips. Then you can flash CWM from within Rom Manager.
Follow these instructions from fallingup's thread:
http://forum.xda-developers.com/showthread.php?t=788099

THANKS
Thanks ALOT this looks really simple the only thing that idk about is how it said to put it in download mode. Idk what that means. Debugging? and do I mount it? Thats all i think. THANKS agian.

Download mode: power off, pull out battery, with Odin open and USB connected to PC hold volume down and plug in USB.

[RECOVERY] 3e Recovery Modded w/ No Verification

NOTE
This is took from untermensch's thread in the Vibrant forum so I take no credit for this (http://forum.xda-developers.com/showthread.php?t=833423)
I have noticed some of you are having issues after installing a new kernel or rom, when you boot into recovery you now have 3e, which does not allow unsigned zips to be flashed. With this version of 3e it has no-verification check, now allowing you to flash whatever you want.
This zip has
1) 3e recovery modified to disable signature checking
2) disables the forced wipe after installing any update.
Instructions
1)Download and extract the file below
2)Use a terminal emulator or ADB shell and type.. (or you can use Root Explorer or SGSTools to mount system RW)
Code:
mount -o rw,remount /dev/block/stl9 /system
3)Use a file manager like Root Explorer and copy the recovery file to /system/bin and replace the one there
4)Now, reboot and you should have a modded 3e recovery with no signature verification
You can either leave the modded 3e recovery or you can now flash CWM via Rom Manager
**Just like anything else, I am not responsible if this bricks your phone, this is fairly simple, follow the guide...Do at your own risk**

Old news, we have CWM now in pretty much everything.
Also you cannot just replace the recovery file... you have to replace the images in sbin or in the zImage its self, otherwise you get errors and cannot do anything.

designgears said:
Old news, we have CWM now in pretty much everything.
Also you cannot just replace the recovery file... you have to replace the images in sbin or in the zImage its self, otherwise you get errors and cannot do anything.
Click to expand...
Click to collapse
I done the exact method above and works fine for me...
Place extracted recovery file in /system/bin/ , reboot and flash cwm via rom manager, works perfectly fine...the reason I posted was, if you read Hardcores thread, and seen this in other threads, that after flashing his kernel, when they goto recovery they now have 3e (depending on which method when entering recovery)..alot of people have done it the way I posted with no issues...im not trying to argue with you, you by far know more then me, just posting what worked for me and some others

sounds like a good idea for the people that updated to Rogers froyo that has the 3e recovery. You could just flash a new kernel, but this is definately a good alternative.
Thanks
Sent from my SGH-I897 using XDA App

If you look at Darkyy's rom he has a script that does this.

Thanks, this works flawlessly on a Rogers Froyo Stock. Now I have CWM working and good to go. The only thing left would be to apply some kind of lagfix.

Tested and works with Rogers 2.2 Rom. Thanks

skorchir said:
Tested and works with Rogers 2.2 Rom. Thanks
Click to expand...
Click to collapse
I also have.
Thanks

Works great on Rogers 2.2. Thanks

I tested it on Galaxy S i9000m bell and it work A+
i do not have to flash cf-boot to make unsigned zip to be installed
thanks a lot for your hard work.
only thing is botton function become different then original 3e
but its working A+

I'm a little confused on how the Recovery works..... I have a I897 that I flashed Cognition 2.3b8 to with ROM Manager/CWM and when I chose "reboot into recovery" from ROM Manager from inside Cognition, it worked fine after reloading packages once. A few days ago, I flashed Perception 10.1 with the firebird kernel. After noticing the battery didn't last as long as it used to with Cognition, I did some research and found the SpeedMod kernel K12L. Before I flashed it, I did a backup from ROM Manager which rebooted into CWM with no problems and did the backup with no problem. I have since flashed K12M and K12N. Now I thought I would give Cog 3.0 a shot and wanted to back up my current config with Perception 10.1/SpeedMod K12N. From ROM Manager, I chose to backup, named my backup and the phone rebooted into 3e Recovery and gave the errors you listed above but I don't understand why? Is it because of the I9000 kernel which doesn't make sense since Firebird is a I9000 kernel. Was it from flashing SpeedMod? Also noticed, that only the volume up/down buttons worked, not the power button which is also the select key. Only way out was to 3 button reboot (or pull the battery) which rebooted into CWM and then initiated the ROM Manager backup.
Any ideas why? Also, if I was to ODIN flash JH6 back to the phone, would that restore the Stock 2e Recovery? Sorry for the long post, but I'm still trying to learn this stuff and think you guys are awesome. The captivate would be a crappy phone if it wasn't for you all.

I guess if I had read your second post a little closer I would have seen that flashing SpeedMod causes it. I used your fix in the OP and when I tell it to "Reboot into Recovery" from ROM Manager, it boots into what I assume is 3e (Goes by real quick) and shows something about MOVI and verification and then boots into CWM Recovery v2.5.1.2. If I 3 button boot into recovery, it boots into CWM v2.5.1.0 SpeedMod ULFK. Seems to work now but I'm still confused. Thanks again.

Using sgstools to change mount RW completes its task fine. When I try to copy the new file to /system/bin it does not allow it. The permissions do not change. I tried terminal emulator it doesnt work either. The files stay -r only. I have tried so many times to delete/rename/ or copy over. I just gave up. My system is 2.2 and rooted before you ask.

davidis57 said:
Using sgstools to change mount RW completes its task fine. When I try to copy the new file to /system/bin it does not allow it. The permissions do not change. I tried terminal emulator it doesnt work either. The files stay -r only. I have tried so many times to delete/rename/ or copy over. I just gave up. My system is 2.2 and rooted before you ask.
Click to expand...
Click to collapse
Use a terminal emulator or adb shell and type...
Code:
chmod 777 /system/bin/recovery
That should give r/w permission to the file, ...i just tested to verify it and it worked for me. also if you have Root Explorer you can just long press the file and select Permissions and check all the boxes.

Exact the same thing is happening to me! Beforehand I had flashed CF Root to get Superuser also at the same time when rooting. I Still can boot into recovery with 3BR and come into the speedmod ULFK settings. Speedmod introduces 3e and you need signed packages. You must have 2e for this I assume!? Can anyone tell me what goes wrong?

Im using the Speedmod kernel and it always pissed me off that everytime I wanted to flash somethng via CWM that I had to pull the battery and restart my phone for it to finish because of the 3e 'no signed packages'
I did the steps in the OP and I noticed that I didnt even have a recovery file in system/bin but I put it in there anyway. I rebooted and flashed a different modem just to check and sure enough, it worked. Now I dont have to worry about pulling my battery and having to reboot my phone everytime I want to flash something.
Thanks for this!

Well the file is moved now. I get reinstall packages in recovery and thats all does. I installed rom manager and have cwm on my sdcard. The phone does not go into cwm recovery. It doesnot give me options to apply install.zip. I have dxjpa and z4root running. This modded recovery does not work. Any ideas?

davidis57 said:
Well the file is moved now. I get reinstall packages in recovery and thats all does. I installed rom manager and have cwm on my sdcard. The phone does not go into cwm recovery. It doesnot give me options to apply install.zip. I have dxjpa and z4root running. This modded recovery does not work. Any ideas?
Click to expand...
Click to collapse
Once you install cwm and reboot back into 3e, select reinstall packages, it will install cwm and then load into it , if it doesn't then the file didn't copy over, make sure it replaces it ok, I've used this quite a few times and it works everytime, and everyone that has posted has not had an issue, so it does work
Sent from my SGH-I897 using XDA App

It did copy over in fact i deleted the old one and put the new one in its place. It never installs anything and seems to error but its so fast i cant read it.
Sent from my GT-I9000 using XDA App

davidis57 said:
It did copy over in fact i deleted the old one and put the new one in its place. It never installs anything and seems to error but its so fast i cant read it.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Try starting over, delete the recovery file and also delete the update.zip on the root of the sdcard, then copy the modded recovery over to /system/bin/ , then open rom manager and install cwm again, something could have happened with the update.zip, cause if you are able to get into 3e and select reinstall packages and it actually starts but errors out with the update.zip, then something could possibly be wrong with the update.zip .. it might restart after you select reinstall packages, but it should then load in to cwm, if it doesnt and boots back into android, then go into rom manager and select restart recovery and see if that works

CWM not working

I have been having issues with CWM on my Fascinate for about 2 weeks now. Whenever I try to flash anything via CWM I get this message:
Samsung Recovery Utils
- for BML -
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
The "reboot system now" is highlighted and I cannot do anything to select apply update.zip
On the bottom part of the screen it says:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Now I have flashed back to D101 and did the ota update to DL09, and flashed the CWM via odin posted on a thread from the android central forum, it is basically a version of CWM for DL05 and DL09. (can't post outside links so I havent posted enough in this forum).
I have tried to apply the update.zip but whenever I do that, after about 25% of the way through it goes back to the error.
I have completely run out of ideas and the people at the android central forums have as well. I have tried everything that I can think of but obviously I am not doing something right.
Can anyone give me some suggestions as to what I can do to try to resolve this issue? Or if there is a way to flash a rom and kernel without CWM. I really do not want to be stuck with stock Fascinate so anything would be appreciated.
Thank you

You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App

I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally.
Now I am able to add kernels and roms to my hearts content.

I'm in a similar situation except my error comes while trying to back up my ROM.
I did root via pushing rage.bin via ADB
Then I used ODIN to put CWMrecovery.tar on the phone.
Flashed CWM via ROM Manager.
At this point I did a full backup with TiBu and did a ROM Backup via ROM Manager.
After that I froze bloatware, 'upgraded' to the Sywpe Beta and De-binged.
At about this point I realized that I had lost Haptic so I flashed the DL09 stock Kernel and that problem was solved. I thought I was good to go until I tried to do another backup via ROM Manager.
When I ran the backup I got the same error as the OP. I ended up in 2e recovery. Since I'm new to this I just chose reboot phone. I did some searching last night but all the posts I found dealt with people flashing custom ROMs and I was getting tired I called it a night with the plans to do more searching today but then I came across this post.
I reviewed my notes and saw the other thread about CWM Recover mode and I checked and I can't reboot into CWM Recovery (via ROM Man) either. I end up in Android (2e) recovery.
I saw the post above me and I need to search on these instructions so I understand this step better.
"I had that same issue until a user on another forum informed me that right after flashing cwm, replace battery and go immediately into recovery mode, do not let the phone boot normally."
I don't seem to be able to boot (up and down key = Power buttong) into any recovery.
It seems like I need to repush CWM via Odin and then reflash via Rom Man but I'm leaving for a trip tomorrow so I'll wait for some input before trying anything since the phone is functionally working.
I'm new to rooting phones so some help with this error would be appreciated.

ezas said:
I'm in a similar situation except my error comes while trying to back up my ROM.
My phone is updated OTA DL09. Then rooted via ADB. I installed ROM Manager and flashed CWM. Since then I've done the usual root stuff. I noticed that haptic was not working and I fixed that by flashing a stock DL09 kernel. I have not flashed a custom ROM.
After de binging yesterday I went todo a back up via ROM Manager and got the same error as the OP. I ended up in 2e recovery. I didn't want to really screw up my phone guessing so I just chose reboot phone.
I was going to do more searching tonight but came across this post first.
I have done two successful back ups via ROM Manager, so after reading this post I assume it's flashing the kernel that got me to this error.
I'm new to rooting phones so some help with this error would be appreciated.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.

You shouldn't have to flash back to stock...
1. Download all necessary files and place on root of your SD card (nonstock kernel, update.zip)
Edit: also add in the superuser and busybox zips, and flash those after kernel (step 5) and this will give you root back if you lost it updating
2. Flash modified CWM .tar with Odin
3. Replace battery and boot directly into recovery by holding both volume buttons down while powering on
4. Once in recovery, apply update.zip to get into CWM
5. Flash new kernel
6. Reboot, enjoy

Kevin and Rob
I followed the instructions to the letter over at AndroidCentral (including flashing busybox_su) and I'm back up and running with Haptic feedback and I'm watching a ROM backup via ROM Manager as I type this. I have not done a lot of testing yet but everything seems to be working fine.
Thanks for all the help.

Kevin Gossett said:
You have to go into CWM immediately after flashing in Odin, before booting up, and flash a new kernel. DL09 breaks CWM on the stock kernel
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Just did that and after I select Install zip from SD car, the screen goes black. When I press the home button it goes back to the green list but when I select anything from there, the screen goes black again.
I have tried flashing back to stock, updating to DL09 and flashing cwm again, but same issue.

OK I am getting really tired of dealing with this. Nothing I try works. I am just going to give up on the idea of installing roms and kernels on my fascinate. I have no idea what the problem is and nobody knows either.
Thanks for all those that helped.

When in CWM the home button turns the screen off. Use the back button or power button to select

Kevin Gossett said:
When in CWM the home button turns the screen off. Use the back button or power button to select
Click to expand...
Click to collapse
Shh, I had no idea about that. I assumed since in order to get to cement recovery you had to press home key that that is what you use while in recovery. Everything works now, thank you.

ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.

gadgetmom88 said:
ok, I'm ready to sell this damn Fascinate on Craigslist for a peanut butter sandwich. I'm miffed with getting CWM working. I have pushed the updated version onto the phone via ODIN, immediately booted into recovery (got the red recovery), and it won't mount my SD card. I had a similar problem in green recovery - it could see my SD card, but wouldn't show me all the files - including the download folder. So I couldn't flash anything. I've tried this 100 different ways. There's nothing wrong with the SD card. It reads fine in the phone, files working other than CWM. Please help. I'm stuck on stock. Have mercy.
Click to expand...
Click to collapse
Download updated CWM at this post: http://forum.xda-developers.com/showthread.php?t=942021
Fixed my CWM problems.

That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.

That is the file I used. Relief
Tried both through Odin and loading onto phone. No dice.

the home key always turns the screen off, u have to hit search button to turn on and go back

OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted

gadgetmom88 said:
OK, just to make sure I'm not crazy, I tried again. First I downloaded the SuperClean 2.2 update to my SD card. I re-downloaded the updated update.zip file and put it at the root of my SD card. I flashed DL09.tar.md5 via Odin to get back to stock. That completed with no problem. I flashed the EB01 radio, no problem. Flashed the updated CWM. Immediately booted into recovery (red). Attempted to Apply update.zip. Errored out. Attempted to apply update from SD card. Here's the error I'm getting:
-- Install from SDcard...
Finding update package...
E:Can't mount/dev/block/mmcblk1p1 (or dev/block/mmcblk0)
(Invalid Argument)
E: Can't mount SDCard:Update.zip
Installation aborted
Click to expand...
Click to collapse
I think I see what your issue is. The red CWM that you loaded via ODIN installs onto the phone itself. You no longer need an update.zip file containing CWM on your sdcard. As long as you have successfully booted into red CWM, your next step is to do a full wipe, and then choose the "install zip from sdcard" option. You should then be able browse your sdcard and select the zip file containing the rom.
DO NOT rename the zip file containing the rom to update.zip and then select the "apply update.zip" option, as that will definitely not work. That option expects to find the CWM recovery app in the update.zip file, and errors out if it's anything else.
Posted from my EB01 SuperClean Fascinate with Voodoo

Oh, and make sure you have the most recent new CWM file from jt1134. The post from him that had the first fixed CWM I think may have required an update.zip file, but the current, updated files in it do not. If you're not sure, download the latest one from that post for Odin, and flash it from Odin again. You will them no longer need update.zip for sure.
Posted from my EB01 SuperClean Fascinate with Voodoo

Roblovesbox said:
I don't use custom roms on my phone but from what I'm gathering on this...
You will need to put it back to DL09 stock...
Flash CWM via Odin..
http://forum.androidcentral.com/ver...s-hacks/54659-how-rooting-your-fascinate.html
Post 4 here will tell you how to do it.
After flashing CWM you will need to put your phone into recovery right away instead of letting the normal rom load. You will then flash over another kernel using CWM and that is it.
List of kernels can be found here:
http://www.samsungfascinateforum.com/custom-roms/list-of-custom-dj05-kernels-for-verizon-fascinate/
I have never put a new kernel or rom on my phone but from what i've read this is the jist of it.
Click to expand...
Click to collapse
Awesome, thanks for the links.

Help - Clockworkmod Recovery

I'm trying to flash a custom rom made from romkitchen however have hit a wall. Any help pointing out a solution or where i may have gone wrong would be most appreciated. I'll outline all the steps i took, not sure if they are related to the issue or not.
I started of with froyo dtjp5 with no 3 button and 3e recovery. I started by using odin to flash the canadian bootloader fix which worked perfectly and gave me 3 button download mode. I then flashed chainfire cf-root 1.3 kernell which also worked perfectly and i know have working 2e recovery mode. I then donwloaded clockwork rom manager form the app market, and flashed the clockworkmod recover 2.5.1.2. It appeared to be successful. However when i attempt to enter recovery mode, either through the application, or through 3 button mode it, simply boots into normal 2e recovery mode rather than clockwork mod. I have tried applying the flash again but it still did not work.Untill i can boot into clockworkmod recovery i cant apply my romkitchen zip file so im kind of stuck. I must be missing something but cant figure it out, so once again any held would be much appreciated. Thanks

flash for example voodoo or speedmod kernel with odin/heimdall or kernel flasher(haven't used it often so i am not sure about kernel flasher)
Sent from my GT-I9000 using Tapatalk

Make sure CWM is set as update.zip on your sdcard - ROM Manager should actually do this for you - then in 2e recovery select flash update.zip ... the very first time it should just reboot your device (so go into recovery again), the second time it should start CWM.
Not sure why CWM is built that way.

Thanks very much

Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.

Cap18k said:
Ok so I am having a problem with cwm that i hope someone can help me with. I just flashed the latest speedmod kernel using the sgs kernel flasher app. Now when i try to reboot into recovery from cwm so that i can access the tweaks menu, the cwm options dont appear. It says i am in android sytem recovery(3e). where my only real option besides wiping the phone is to apply sdcard:update.zip, which does not work even though cwm is set as update.zip on my sd card. Any help to this noob would be appreciated.
Click to expand...
Click to collapse
to apply CWM from 3e recovery you need it on your sd card. it has to be named 'update.zip'
the other way to do this, is download odin version, boot into download mode, and flash.
overall process takes less than 5 mins.

Check if you really have it -> settings -> about phone.
And try to flash it using odin, that worked flawlesly for me.
Sent from my GT-I9000 using Tapatalk

The kernel definately flashed correctly. I am not sure why the update.zip isnt workingfro cwm (the signature verification keeps failing), but i am going to try odin and see what happens. I've never used it before, but i am downloading it now.

ClockworkMOD now works with 3E recovery?

EDIT: This is not a result of ROM Manager, this is a result of installing Overstock 1.4.3 which also installs CWM recovery.

Not trying to be rude or anything, but I don't remember this ever not working.

I am having issues with 3e. No matter how carefully I follow the instructions (flash->reboot->reinstall packages always fails) when flashing recovery from current Rom Manager and Premium License, it does not work. Additionally, the premium license is persistent in my applications list and no premium ROMs ever show up in my download list. Even when I select Vibrant MTB and either 2.x or 3.x, all I get is a message that states current recovery will be used. I'm still going thru posts for a possible solution.

Try putting this in the root of your internal SD, reboot to recovery and reinstall packages twice.

Yeah, I was misinformed. This is not a result of ROM Manager, this is a result of installing Overstock 1.4.3 which also installs CWM recovery.
If anyone want to do this it is really simple with the SGS kernel flasher app. Download your overstock kernel of choice from here or your choice of kernel that includes CWM from the dev bible, unzip it, move the zimage to the internal phone memory and then choose that file as your kernel with the SGS Flasher.
Note: I have not been successful with going back to stock kernel when I tried to but that may have been because I didn't disable the lag fix.

jneal9 said:
Try putting this in the root of your internal SD, reboot to recovery and reinstall packages twice.
Click to expand...
Click to collapse
I'm 100% stock on 2.2Froyo except for root/unlock and am puzzled by this. I know it's not ROM Manager because it worked on my first SGS4G which died and totally bricked after a week (TMO exchanged it happily cause it wouldn't even go into download mode or charge).
What's in this update you linked? Cause I'm smart, but not as smart as most of the posters here and I recognize only a couple things in the file.

It installs CWM.
Are you using a Vibrant or SGS4G?

SGS 4G for TMobile.
BTW... I totally appreciate the help here. I don't know the ins-n-outs of the android phones like I do IOs, not that I'm all that up to date on that either.
Update... Still does not work. I get the failed signatures error and the update is aborted. I tried doing a factory reset and re-rooting the phone in case something didn't work correctly and get the same error. At this point, it's all gravy since the only thing I really needed was the unlock but now I'm in a "I just want to know how this works" mode.
Thanks for the help.

Ok yeah that my be the problem since that zip is for the Vibrant. So just to be straight, you are unable to get CWM on your SGS4G?

That's correct. I can't apply any update.zip nor does flashing CWM recovery work. It says it's flashing but then when I do the 3 button reboot to get to recovery, it's the 3e version still and when I go to reinstall packages, it starts but then fails as it tries to verify signatures.