Hi, I have a Desire Z that I purchased used and now realized has been modified in some way before. It was at some Froyo version, but then I applied the OTA gingerbread update because I did not know at the time that it was modified. It is carrier unlocked for sure. In the boot loader it has the following settings:
VISION PVT SHIP S-OFF
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.12_M
eMMC-boot
Apr 11 2011, 23;36;2
it has S-Off, but it does not have root. I've tried to flash a recovery using android flasher, but it did not work. Although It has s-off, I am not sure if still keeps it, after upgrade from stock froyo to stock gingerbread, as it is called in the xda wiki as false s-0ff after upgrading.
I do not know if there is any chance to cause any damage on the phone. I would be very gratefull if anyone can give me an answer how to preceed to install the recovery.
Many thanks,
raimundo amador said:
Hi, I have a Desire Z that I purchased used and now realized has been modified in some way before. It was at some Froyo version, but then I applied the OTA gingerbread update because I did not know at the time that it was modified. It is carrier unlocked for sure. In the boot loader it has the following settings:
VISION PVT SHIP S-OFF
HBOOT-0.85.0013
MICROP-0425
RADIO-26.10.04.12_M
eMMC-boot
Apr 11 2011, 23;36;2
it has S-Off, but it does not have root. I've tried to flash a recovery using android flasher, but it did not work. Although It has s-off, I am not sure if still keeps it, after upgrade from stock froyo to stock gingerbread, as it is called in the xda wiki as false s-0ff after upgrading.
I do not know if there is any chance to cause any damage on the phone. I would be very gratefull if anyone can give me an answer how to preceed to install the recovery.
Many thanks,
Click to expand...
Click to collapse
If you're S-OFF you should be able to flash a pre-rooted ROM via PC10IMG.zip via bootloader, and then flash a Recovery... technically, the 2.3 update is not rootable at this time. One usually has to downgrade first, but since you're S-OFF... I'm thinking you should be okay. Do some research though... perhaps someone else can confirm this?
Yes, I am currently doing a lot of research, but I am getting confused.
I though in the same lines as you do, but after a read this from xda-developers http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision, after that... I do not know how to proceed, I am stuck.
'I got with the firmware 1.72x, and as it is described in this post, after the update I should only have a false s-off, and no PC10IMG though bootloader is goig to work.'
I really do not know, but any help will be very greatful,
Hi, I do not know whether the solution is raised here on xda, but as something you can restore as described in the Polish formum DZ - http://forum.android.com.pl/f244/tu...fon-po-rootowaniu-do-stanu-pierwotnego-92344/
I think that with the help of "Google translate" translate, this method works 100% same-it's restored by this method.
Gotten it!!! I downloaded 1.34.405.5_PC10IMG.zip renamed to PC10IMG.zip and flashed it via hboot. It worked!
Is it possible to install virtuous unity rom from there, by renaming to PC10IMG.zip, and flashed it? or do I need to install a custom recovery first?
Many thanks guys
raimundo amador said:
Gotten it!!! I downloaded 1.34.405.5_PC10IMG.zip renamed to PC10IMG.zip and flashed it via hboot. It worked!
Is it possible to install virtuous unity rom from there, by renaming to PC10IMG.zip, and flashed it? or do I need to install a custom recovery first?
Many thanks guys
Click to expand...
Click to collapse
The very first thing you need is a Recovery. Followed by a NANDroid backup, IMO. 4EXT Recovery (link in my signature) is wonderful. But ClockworkMod is great too. Just stick with version 3.0.2.4. So you have root now? You've got Superuser and all is well? That's awesome.
Nop, I am not root, it s stuck on 1.34.405.x stock, no recovery, nothing. So rooting is next.
Do you know any thread I can follow to root a stock 1.34xxx already s-off
I ve been searching around, and I bookmarked some relevant stuff, but I have no much time to spare on that, so I would appreciate any thread that goes straight into matter, that you may know and it includes the files needed (if possible)..
It s been three years since I started with android I followed all the versions, I rooted the g1, which I am still using quite often, I also rooted my girlfriend's my touch 3g, and now... its time for the desire z.
I'm going ahead !!!
follow this guide
But change the gfree from "./gfree -f -b hboot-eng.img -y recovery.img"
to just "./gfree -b hboot-eng.img -y recovery.img"
that should sort it all out.
-Nipqer
Nipqer said:
follow this guide
But change the gfree from "./gfree -f -b hboot-eng.img -y recovery.img"
to just "./gfree -b hboot-eng.img -y recovery.img"
that should sort it all out.
-Nipqer
Click to expand...
Click to collapse
Many thanks guys, I am nearly there...
Is this the exact command? my device is already, s-off, superCid, and sim-unlock (xtc clip). I do not have a clue about gfree either. Maybe I screw it all!!
That command I posted will flash a eng hboot and cwm recovery, the -f option is for s-off, supercid and sim-unlock, but seeing as we have these its unnecesary.
So yes, it is the exact command you need. Be sure to check the md5's though!
-Nipqer
do not lose the S-off updating for Hboot?
it's done, I just released my desire z, it is free !!! Many many thanks...
Related
Please help me. I just got it yesterday. My girlfriend was already complaining about me spending the money on it. Now when she gets home...oh boy. I was trying to change the color of the status bar. I went into system/framework, restarted and now it's stuck at the T-Mobile screen.
I just rooted it with adb. I don't have the Clock recovery installed. I don't have alot of time either. Please tell me my options. Here is my hboot screen.
VISION PVT SHIP S-OFF
H-BOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010, 17:59:38
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
MobileWon said:
Please help me. I just got it yesterday. My girlfriend was already complaining about me spending the money on it. Now when she gets home...oh boy. I was trying to change the color of the status bar. I went into system/framework, restarted and now it's stuck at the T-Mobile screen.
I just rooted it with adb. I don't have the Clock recovery installed. I don't have alot of time either. Please tell me my options. Here is my hboot screen.
VISION PVT SHIP S-OFF
H-BOOT-0.82.0000
MICROP-0425
RADIO-26.03.02.26_M
eMMC-boot
Sep 2 2010, 17:59:38
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
Click to expand...
Click to collapse
Every phone i have had from the g1, mytouch 3g, vibrant, and now g2 it never fails to amaze me how people who dont know what they are doing manage to brick their phone in under a day. PROTIP READ learn what you are doing before you go in doing it so you dont screw yourself.
If you have the hboot menu and you seem to have s-off so you can restore official htc rom or a custom rom
Sent from my HTC Vision using XDA App
Yeah. Best bet would be to flash a custom recovery through fastboot and then reinstall the stock rooted rom or install a custom ROM.
And hopefully not make things worse botching the recovery flash
Hot_Hands said:
Yeah. Best bet would be to flash a custom recovery through fastboot and then reinstall the stock rooted rom or install a custom ROM.
And hopefully not make things worse botching the recovery flash
Click to expand...
Click to collapse
Yup, exacly what he said.. also, I don't think editing the statusbar from a stock is possible because its odexed, correct me if I am wrong though.. unless you really know what you're doing.. so now after flashing recovery, try again with a nandroid if you have yours if not with fastludeh's stock odex or deodex rom if you want to keep it stock.
Sent from my HTC Vision
You'll need to download this to your android-sdk tools folder:
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-vision.img
Then go into fastboot and type
fastboot erase recovery
followed by
fastboot flash recovery recovery-clockwork-2.5.1.2-vision.img
From there you should put a custom ROM (probably CM6 or enomthers) or rooted stock as advised above on your SD card, boot into clockwork, wipe system/data and install the ROM (and gapps if you do CM6).
And please remember: nandroids are your friend
Hot_Hands said:
You'll need to download this to your android-sdk tools folder:
http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.1.2-vision.img
Then go into fastboot and type
fastboot erase recovery
followed by
fastboot flash recovery recovery-clockwork-2.5.1.2-vision.img
From there you should put a custom ROM (probably CM6 or enomthers) or rooted stock as advised above on your SD card, boot into clockwork, wipe system/data and install the ROM (and gapps if you do CM6).
And please remember: nandroids are your friend
Click to expand...
Click to collapse
Thanks, I,m gonna go with the enomthers rom. Do I need to rename it before flashing?
MobileWon said:
Thanks, I,m gonna go with the enomthers rom. Do I need to rename it before flashing?
Click to expand...
Click to collapse
Nope. Just put it on your SD and flash from recovery.
MobileWon said:
Thanks, I,m gonna go with the enomthers rom. Do I need to rename it before flashing?
Click to expand...
Click to collapse
No, you do not need to rename it.
Sent from my HTC Vision using XDA App
MobileWon said:
Thanks, I,m gonna go with the enomthers rom. Do I need to rename it before flashing?
Click to expand...
Click to collapse
And just so you know, your lucky that you flashed the ENG HBOOT, without that, you would have been screwed.
EDIT: Oh wait, it says SHIP S-OFF, shouldn't it say ENG S-OFF if you had the ENG boot loader? Did you even flash the new HBOOT?
KoolKidsKlub said:
And just so you know, your lucky that you flashed the ENG HBOOT, without that, you would have been screwed.
Click to expand...
Click to collapse
Wait, does he have engineering HBOOT installed? The HBOOT screen he listed says SHIP. Without the ENG HBOOT, he won't be able to fastboot the ClockworkMod Recovery.
To the OP, you probably will have to flash back to the official HTC ROM. See this thread: http://forum.xda-developers.com/showthread.php?t=788489.
And yes, as others have stated, you should make a nandroid backup prior to messing with system files. You cannot edit the framework without DEODEX-ing the system first.
ianmcquinn said:
Wait, does he have engineering HBOOT installed? The HBOOT screen he listed says SHIP. Without the ENG HBOOT, he won't be able to fastboot the ClockworkMod Recovery.
To the OP, you probably will have to flash back to the official HTC ROM. See this thread: http://forum.xda-developers.com/showthread.php?t=788489.
And yes, as others have stated, you should make a nandroid backup prior to messing with system files. You cannot edit the framework without DEODEX-ing the system first.
Click to expand...
Click to collapse
Yeah I just noticed that and edited my post about 1-2 minutes ago.
Ok, I entering these commands in cmd window right? Just like I did for rooting, right? If so, it said failed, not allowed when I input fastboot erase recovery.
The guys above were right. I saw s-off and assumed you had the eng-hboot. Sorry. At this point you're going to have to flash an RUU and go back to stock and then try again.
MobileWon said:
Ok, I entering these commands in cmd window right? Just like I did for rooting, right? If so, it said failed, not allowed when I input fastboot erase recovery.
Click to expand...
Click to collapse
Yeah ummm you might be screwed, we assumed that you flashed the engineering HBOOT, and only with the engineering HBOOT can you use fastboot to save your self and it seems like you don't have it. I'm not sure what to do now, I think some one said that you might have to flash the stock ROM but I'm not sure how. Wait around for some other guys to help you out, they know more than me with this stuff.
Hot_Hands said:
The guys above were right. I saw s-off and assumed you had the eng-hboot. Sorry. At this point you're going to have to flash an RUU and go back to stock and then try again.
Click to expand...
Click to collapse
Ok, I have the stock rom already. How do I flash a RUU? Or can you give me a link?
Hot_Hands said:
The guys above were right. I saw s-off and assumed you had the eng-hboot. Sorry. At this point you're going to have to flash an RUU and go back to stock and then try again.
Click to expand...
Click to collapse
Are you sure he can do that? Because theres like a sticky in the dev section of the forums saying NOT to do that unless you know what your doing or only if you flash the EXACT same ROM that came shipped with your phone, or something like that.
EDIT: And if you do have to flash an RUU, could you please explain how? I would like to know how just in case I screw something up(which I probably won't because I have been on my computer searching the forum, asking for help and to double check that what I have learned is correct and what to do if something bad happens for the past week or two) and I can also use the information to help other users.
KoolKidsKlub said:
Are you sure he can do that? Because theres like a sticky in the dev section of the forums saying NOT to do that unless you know what your doing or only if you flash the EXACT same ROM that came shipped with your phone, or something like that.
Click to expand...
Click to collapse
That was a warning because if you had S-Off and root it would put S-On and remove root. It was an issue because for a while it was impossible to root the DZ's 1.72 RUU but this has since been worked around and doesn't apply to the G2.
Ok, guys Im not an idiot. I previously had a HD2 and had no problems...just rushing to get my phone right before I go out of town for the weekend. So, whatever I have to do to get it right.
KoolKidsKlub said:
Are you sure he can do that? Because theres like a sticky in the dev section of the forums saying NOT to do that unless you know what your doing or only if you flash the EXACT same ROM that came shipped with your phone, or something like that.
Click to expand...
Click to collapse
You might be right.
Ok,... So you have gone into your Hboot screen, select fastboot, then it says Fastboot on the screen yeah? Do:
fastboot devices
in cmd, do you get anything?
Hi all,
I was wondering if it is possible to revert hboot to s-on after s-off with alpharevx beta, will update with 2.2.1 ruu overwrite alpharevx hboot???
I did update with ruu, but almost nothing happened after completion, hboot is still same s-off, only recovery was original... removed cwm
strange...
anyone help...
It wont remove the patched HBoot because it is v6.x, and the RUU's is v1.x. It's not yet possible to revert, although the devs had stated they will release a special downgrader which will restore the original HBoot, but, its not released yet.
So, do you think that, after downgrade and all that guru stuff, and after installing RUU, we will get wildfire in exact same state before installing alpharevx???
Thank you for quick reply
Ofcourse, since after downgrading, it will be the Stock HTC Hboot. And, as you already found out, RUU's will remove the Custom Recovery, and the Superuser Binary, which gives root, so in all, giving a stock out of the box phone.
Oki, so now waiting for downgrader )) thanks again
Please help, I'm trying to root so I can run netflix on mt4g, almost there (i think)
Tysvm2: the folks that wrote: the true root article @
http://forum.xda-developers.com/showthread.php?t=858996
I am trying to flash a custom recovery and rom (hoping to do: panache or CM7 and twrp recovery
(PG86IMG.zip) My end goal is to run netflix app on htc glacier)
I have succeeded in setting up ADB/SDK drivers, etc.
On hboot i see: S=off
I am having a PROBLEM with TRUE ROOT gfree method
At step 12. It says:
"If this is the first time you have rooted your device you will need to run visionary again (temproot w/set system r/w after root checked and then attempt permroot) to make root privileges permanent and then reboot again. Now "su" should work properly for you."
I've run into a problem :
I restarted in hboot and I see s=off but when I try to open terminal:
It reads:
$ export PATH=/data/local/bin:$PATH
$su
PERMISSION DENIED
I tried to run temproot and permroot on visionary + R14 to "seal the deal" & move onto install of the engineering bootloader
It appears I am stuck in between temproot and perm root won't stick for some reason ...
FYI: all sorts of apps force closed immediately after reboot after I ran the reboot it says s=off and has bootloader version 0.86.0000
I just did:
1. a factory reset from hboot
2. Reinstalled visionary + R14
3. And ... astro file manager, terminal emulator app and easy installer, etc
4. i have all the files that the TRUE ROOT thread reccomended but terminal emulator says permission denied when I type: su
PERMISSION DENIED
It looks to me like visionary Is not properly establishing temp root or perm root after s=off.
Suggestions please.
thank you,
CP
HTC GLACIER
s=off
bootloader version 0.86.0000
also: HTC DREAM aka Tmobile g1 rooted with cyanogen old school
Ps: I'm new to the forum culture and I want to be sure to be respectful and post properly; if this is not a proper place for this kind of question please redirect me patiently
Try the older verson of Visionary. R11 I believe. This has come up before and it has worked for other people.
If you have already received the OTA, use Gingerbreak or fre3vo method for temp root instead of Visionary.
I suggest to flash engineering bootloader ASAP, it'll save you the question next time, by allowing to flash custom recovery (thus enabling root by flashing any su.zip package) at any time, independent of the ROM.
I got a replacement phone, and this is what I had to do...
1. Install Visionary r14 and Terminal Emulator
2. Download gfree file and move to phone
3. Temproot (with r/w switched on), then su on TE, then run gfree*
4. Reboot and validate S=OFF
5. Temproot again (with r/w switched on), then click on Permroot
Hi Thank you for your reply, I tried visionary r11 but when I installed it would not run (perhaps i installed the wrong one) my easy install app read it as visionary 1.0 is that the same as R11?
Thank you for your reply but i tried this:
http://forum.xda-developers.com/showthread.php?t=1030119
from Shaddy-Z.(10th April 2011, 01:35 PM) <- thank you Shaddy
"
http://forum.xda-developers.com/show...&postcount=899
It's the last download link."
But my easy install app calls it visionary 1.0 (is that the same as R11?) And it did not work ... it won't even open up, can you tell me do you have any experience with:
Jack R_1's suggestion: "If you have already received the OTA, use Gingerbreak or fre3vo method for temp root instead of Visionary."
What are benefits of gingerbreak vs. fre3vo? I just want to be sure to be careful so as to not brick my baby.
If you already have Radio S-OFF, have you tried flashing custom recovery via fastboot flash recovery? Or does your bootloader version not allow that?
Also try this post:
http://forum.xda-developers.com/showpost.php?p=15943010&postcount=6
I only know about gingerbreak not the other one, it will use a new exploit to gain perm root under gingerbread. But if you have the new OTA that's gingerbread 2.3.4 I think it won't work. Others have upgraded to the new OTA and can't root again, why? Since a new Radio and I think SPL are in this new OTA. And HTC has used a new security method to prevent such things as rooting.
Check this thread
http://forum.xda-developers.com/showthread.php?t=1174344
Flash the .85 engineering bootloader with adb and then clockworkmod from fastboot. You then can use the rooted nandroid backup in rom Bible (if you want to stay stock). Once you do that happy flashing. If you need any help pm me
Sent from my Google Nexus 12! yup I'm from the future
mark manning said:
Flash the .85 engineering bootloader with adb and then clockworkmod from fastboot. You then can use the rooted nandroid backup in rom Bible (if you want to stay stock). Once you do that happy flashing. If you need any help pm me
Sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
Are you sure this holds true for users with newest OTA?
Ace42 said:
Are you sure this holds true for users with newest OTA?
Click to expand...
Click to collapse
As long as he has s-off it will.
Sent from my Google Nexus 12! yup I'm from the future
Ace42 said:
Are you sure this holds true for users with newest OTA?
Click to expand...
Click to collapse
Wait, he can't gain even temp root huh. NM your sol until a dev figures out how to root the gingerbread rom.
Its kind of a long shot. Since you have s-off you can try using the PD15IMG.ZIP from hboot and root the froyo rom. Not sure if that will work or not
Sent from my Google Nexus 12! yup I'm from the future
mark manning said:
Wait, he can't gain even temp root huh. NM your sol until a dev figures out how to root the gingerbread rom.
Its kind of a long shot. Since you have s-off you can try using the PD15IMG.ZIP from hboot and root the froyo rom. Not sure if that will work or not
Sent from my Google Nexus 12! yup I'm from the future
Click to expand...
Click to collapse
I'm using MIUI, I was asking cause I have a friend who's stuck on the new OTA since they accidentally flashed the non-rooted version of the OTA, probably since all of them had the same title and he didn't read...
Okay let me ask this: What about packing an unsigned PD15IMG.zip with ENG HBOOT and/or ClockworkMod Recovery and nothing else inside it? If you have Radio S-OFF, this image should be accepted by the bootloader and give you a route back to root.
I don't know if such a .zip has been made yet for the MT4G but it's not impossible. It's been done for the S-OFF Sensation:
http://forum.xda-developers.com/showthread.php?t=1122053
See "ENG Hboot" - there is a PG58IMG.zip file there, and there is another under "Here is the download link to recovery".
Again this thread has nothing to do with the MT4G but it's the same principle.
So... if there is anyone out there who knows how to pack a PD15IMG.zip for a Radio S-OFF device, please speak up and help out the OP!
Interesting, I think all you need to do is replace the file inside of zip but not totally sure.
Sent from my Google Nexus 12! yup I'm from the future
What I don't know is if the zip has to be constructed in some particular way to be accepted as valid, even with S-OFF. But yeah, there should be a way to flash CWM to the S-OFF bootloader.
Sent from my Nexus One using Tapatalk
Thank you but I don't know what that is exactly.
Ru suggesting I restart holding down on volume and select recovery from hboot?
Sent from my HTC Glacier using XDA App
crouchingpossum said:
Thank you but I don't know what that is exactly.
Ru suggesting I restart holding down on volume and select recovery from hboot?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
No not yet, gonna try to figure something out for you tomorrow. Be patient please
Sent from my Google Nexus 12! yup I'm from the future
Are you on 2.2.1 or are you on 2.3.?
Okay I'm just poking around blindly in the dark here... I'm not a developer, just a script tinkerer... but if you're brave enough...
I grabbed one of the PD15IMG.zip radio files from the Dev section just to obtain the proper android-info.txt file. Then I created a new zip containing only:
- android-info.txt
- CWM version 3.0.2.4 for Glacier, in .img format, renamed to recovery.img
I've attached it here. Rename it to PD15IMG.zip, put it on the root of your SD, and try booting into HBOOT and see if it prompts you to install the zip. If so, does it succeed?
If yes, then try booting into recovery. Do you get Clockwork?
If it does not succeed, please report any error messages.
I highly doubt this can damage your phone because your ROM is still bootable and your bootloader still works, so the worst you could get is a bad recovery that you have to fix up. But I hold no liability for anything that gets borked
Hello all.. I am tryin to install the engineering bootloader and the file I need from the wiki page is not there anymore. Does anyone know where I can obtain a true copy of it. I d/l one and its not right, the md5sum was incorrect. It should be md5sum: df4fd77f44993eb05a4732210d2eddc6. Thanks if you can help. Im just trying to be thorough as i am learning all this. I have it rooted with s=off but I want to install eng. bl ....Thanks
**It is for MyTouch 4g**
Use this. Its the eng h-boot and clockworkmod recovery.
https://rapidshare.com/#!download|...|3930|R~C053B71776B49869847E4E328CF8DEC4|0|0
I got it from one of the stickies in the dev section.
Also, I have 2 Mt4g. One of the has the bootloader unlocked via HTCdev. I keep trying to flash a Stock 2.2.1 rom to it so I can do the Perma Root method on it. I have a custom rom on it currently, but it has s=on. Now the other one was stock 2.3.4 and I just got finished rooting it, for practice. Now back to the one with the bootloader unlocked by HTC, will traditional methods still work on it? I cant seem to get the adb/fastboot method to install the 2.2.1 rom on it. what would you recommend I do to get s=off on it if Im bent on doing it?
jjbadd385 said:
Also, I have 2 Mt4g. One of the has the bootloader unlocked via HTCdev. I keep trying to flash a Stock 2.2.1 rom to it so I can do the Perma Root method on it. I have a custom rom on it currently, but it has s=on. Now the other one was stock 2.3.4 and I just got finished rooting it, for practice. Now back to the one with the bootloader unlocked by HTC, will traditional methods still work on it? I cant seem to get the adb/fastboot method to install the 2.2.1 rom on it. what would you recommend I do to get s=off on it if Im bent on doing it?
Click to expand...
Click to collapse
I know NOTHING about the unlocked bootloader, so forgive me. Will flashing the froyo PD15IMG.zip from bootloader not replace your bootloader with the stock S-On bootloader that the rooting w S-Off guides are written for? Or has HTC figured out some way to bone you on that?
PD15IMG method of downgrading should take you to the older OS.
It won't necessarily take you to the older bootloader.
Not sure that being on the older bootloader is required for gfree to work. The older OS is indeed required.
Ok I'll tell you what I did this morning. I read a bunch last night. I am trying desperately to grasp & understand things. Its just there are so many different ways to acheive what I want to accomplish. Im doing this in small goals. My goal at this point is to get this MT4G, that is bootloader unlocked by HTC, to flash the Stock 2.2.1 Rom.But for some reason, it wont. Ive tried using my PC ADB/fastboot method, with no success. This morning I tried Recovery Clockwork, which I did wipe/factory reset, wipe cache, wipe davli cache, and then I choose the write zip from sd card, PD15IMG, and it wont do that either. I know I could be more helpful if I gave the exact errors but I forgot what they are, and at this point I am beginning to think that because its HTCdev unlocked, its not going to let me flash the 2.2.1. It does everything fine, until I attempt to flash the 2.2.1. The md5sum is ok too. If it were you, and you were running a custom ROM (ProjectMIUI 2.2.17 [R6]- UPDATED 2/21/12), and your device was HTC unlocked, but you wanted to get s=off, with engineer boot, how would you begin, and what method would YOU use? Give me some of your excellent advice for my birthday, which is today.
pdimg.zip files are flashed through the bootloader, not recovery. To do this, put zip on root of SD card power off phone hold volume down and power until bootloader appears and follow onscreen prompts.
HTC-Dev-unlocked bootloader 100% allows downgrading, because someone already did it before you. If you fail achieving it - means you're doing something wrong again and again, not realizing it. If I were you, I would think - why is it that your attempts to flash PD15IMG fail - and correct what you're doing wrong. But obviously, this excellent advice was given to you some time before your birthday, and still didn't help.
So, here's another advice:
Go download a PRE-ROOTED 2.2.1-based ROM.
Assuming you find one: flash it in recovery and flash boot.img from it separately.
Reboot to ROM.
Run gfree.
Flash Eng HBOOT.
If you don't find any 2.2.1-based ROM available, then you're out of luck. Sit down and find out what you're doing wrong that doesn't let you downgrade with PD15IMG.
Or just keep your phone as it is, and flash kernels manually, until you understand more.
Ok,I understand what you are saying. But when I put it on the root of my SD card as I have done multiple times, I pwr up in hboot, I wait on the blue progress bar, then a gold progress bar, then I get an error, I think it was "older version" if I remember correctly. There's not much I can do wrong to mess up a simple hboot flash of PD15IMG,you boot your phone up and wait ...
Sent from my HTC Glacier using Tapatalk
To avoid this error, you need to flash the MISC partition to "fool" the phone into thinking it's older than it is.
Read the downgrading guide, and since you're rooted - execute the "misc_version" part only:
> adb push misc_version /data/local/tmp/misc_version
> adb shell chmod 777 /data/local/tmp/*
> adb shell
Click to expand...
Click to collapse
If you see "$", it means you're not running in root shell. Then execute "su" and verify that you get "#" to continue.
# cd /data/local/tmp
# ./misc_version -s 1.00.000.0
Click to expand...
Click to collapse
You should see:
--set_version set. VERSION will be changed to: 1.00.000.0
Patching and backing up partition 17...
Click to expand...
Click to collapse
Then attempt downgrading again.
Jack_R1 said:
To avoid this error, you need to flash the MISC partition to "fool" the phone into thinking it's older than it is.
Read the downgrading guide, and since you're rooted - execute the "misc_version" part only:
If you see "$", it means you're not running in root shell. Then execute "su" and verify that you get "#" to continue.
You should see:
Then attempt downgrading again.
Click to expand...
Click to collapse
Everything went well until I got to the flashing part again. I did it 2 times, one time with fastboot and i got this:
C:\adb>fastboot-windows oem rebootRUU
... OKAY
From my PC:
C:\adb>fastboot-windows flash zip StockRom.zip
sending 'zip' (319593 KB)... OKAY
writing 'zip'... INFOadopting the signature contained in this image...
INFOzip header checking...
INFOzip info parsing...
FAILED (remote: 99 unknown fail)
From my phone:
The next time, I did it in hboot from the handset and it returned an error that said "wrong zip file"
**I think I am going to be content flashing roms and the boot.img seperately until I find someone with this problem that figures it out. Besides I have another mt4g that I perm rooted s=off, so I truly feel like I have followed instructions well, since my 2nd phone worked out. Its just this one with the HTC unlocked b/l giving me problems.
Thank You for your help...
You insist on NOT following the guide, so I won't help you anymore.
FOLLOW THE DAMN GUIDE UNTIL YOU UNDERSTAND WHAT YOU'RE DOING!
Because obviously, you're doing lots of basically wrong stuff, like trying to flash a PD15IMG.ZIP by fastboot, or using fastboot oem commands.
I understand u getting frustrated, but I have followed the guide. It don't work that way either. It tells me " wrong zip file" in hboot when I do, & I know its the right one because I checked the md5sum. If its lettin me flash any Rom in CWM recovery, why can't I flash a 2.2.1 Rom in recovery? But just to let u know, I have followed the guide to the t, more than once. Sorry if u r getting frustrated but I have tried everything u told me, & thanks for helping.
Sent from my HTC Glacier using Tapatalk
Ok it says
***UNLOCKED*** (by HTCdev)
GLACIER PVT SHIP S-ON
HBOOT-0.89.0007
MICROP-0429
RADIO-26. 13.04.19_M
eMMC-boot
Dec 13 2011 21:07:39
HBOOT
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMG CRC
I do have Visionary and a stock unrooted 2.2.1 (PD15IMG). I also have Recovery CWM 5.0.2.0 and 4ext, just to let u know what resources I have. I think I have d/l everything under the sun..lol
Sent from my HTC Glacier using Tapatalk
Anglgodes19 said:
Good, now that makes it easy as I deleted my modified stock rom last year which I made specially for rooting, so lets move on...
1) Gain TempROOT via VISIONary+
2) On terminal.
adb shell [enter]
su [enter]
dd if=/dev/block/mmcblk0p17 of=/sdcard/msicold.img [enter]
3) Access /sdcard/msicold.img and open it in hex editor.
4) Find MSIC value XXX.XXX.XXX.XXX (ex: 2.09.1800.1) and change it to OTA "1.17.531.2" and save the file as msicnew.img on SDCard.
5) Now back on adb terminal:
dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17 [enter]
sync [enter]
6) Now reboot in to bootloader and flash PD15IMG.zip as you would normally do.
Report back if you have issues or problems or can't find it in that case I suggest you upload your msicold.img and ill edit for you so you can replace it.
Click to expand...
Click to collapse
Ok I did that and opened the msicold.img in hex editor, and honestly I dont have a clue as to what i was doing, but i think i located the value and because i followed the downgrade guide, i beleive its 1.00.000.0, but i dont know how to change it. Any way i can email it to u and have u change it? my email is [email protected] if you will send me a blank email, I'll reply back with the attatched file...Thank you..
jjbadd385 said:
Ok I did that and opened the msicold.img in hex editor, and honestly I dont have a clue as to what i was doing, but i think i located the value and because i followed the downgrade guide, i beleive its 1.00.000.0, but i dont know how to change it. Any way i can email it to u and have u change it? my email is ****** if you will send me a blank email, I'll reply back with the attatched file...Thank you..
Click to expand...
Click to collapse
You may want to edit this post. Ask anyone interested in helping to PM you. Posting your email address on an open forum isn't a good idea.
estallings15 said:
You may want to edit this post. Ask anyone interested in helping to PM you. Posting your email address on an open forum isn't a good idea.
Click to expand...
Click to collapse
Wonder what happened to Anglgodes19 and all his posts? He disappeared like a theif in the night!!
1.00.000 is the correct value.
If bootloader doesn't accept PD15IMG.ZIP - it either means you're doing something wrong even though you're 100% sure you're not, or that HTC-Dev-unlocked HBOOT doesn't accept the image for downgrading, which I highly doubt.
In any case, as I wrote you, you can download and flash any 2.2.1 pre-rooted ROM, if you find one with working link, and continue the guide from there.
I don't think I can help you with anything beyond this point.
Jack_R1 said:
1.00.000 is the correct value.
If bootloader doesn't accept PD15IMG.ZIP - it either means you're doing something wrong even though you're 100% sure you're not, or that HTC-Dev-unlocked HBOOT doesn't accept the image for downgrading, which I highly doubt.
In any case, as I wrote you, you can download and flash any 2.2.1 pre-rooted ROM, if you find one with working link, and continue the guide from there.
I don't think I can help you with anything beyond this point.
Click to expand...
Click to collapse
Ok then, one last question. If I cannot get my phone to flash via hboot, Is it possible to flash the 2.2.1 rom through CWM like I am flashing other roms? Or if I flash a rooted 2.2.1 rom could I the proceed in getting s-off/ eng hboot? Or does it have to be done through hboot only with a stock rom? Or possibly a modified 2.2.1 rom that has been made to flash in recovery?
'
I have a MT4G in which I unlocked the bootloader and tried to flash a custom ROM. Prior to that I did my level best to attain root by the available methods but could not achieve s-off. However the unlocked bootloader would not allow the custom ROM to boot and in my stupidity I did not make a nandroid before flashing. I am now stuck at the myTouch logo and thats it.
I tried to flash the stock roms but I keep getting mainver is older; update fail. I tried the 1.17.531.2 and the 2.19.531.1 but they both give me the same thing. Am I screwed or is there any hope for my phone?
Glacier PVT Ship S-ON
HBOOT-0.89.0007
MICROP 0429
RADIO 26.13.04.19_M
eMMC-boot
Dec 13 2011, 21:07:39
Did you use htc dev to unlock it? Relock it and follow the steps in the dev section. So you can go into bootloader? Push PD[whatever].img and the bootloader will detect it
I did relock it but it keeps giving me the mainver is older message and saying that update failed.
Solved! Thanks
finally i was able to find the right .img and flash that through fastboot and got a working phone again! thank you for your help!
Its such a horrible feeling when you are trying to get S-OFF and get stuck with a bootloop. I'm glad you figured it out.
You can flash any custom Rom, but before you do, unzip the Rom , and place the "boot.img" from the custom Rom, in your adb/fastboot folder, and flash it like you did to get it working again. I did it for awhile until I decided to relock & root properly.
**by the way..I hate the topic title! You are not stupid..you just made a MINOR mistake, which is the best tool you can use to learn by! I know how it is to be impatient, & just jump in and start flashing and not reading in advance. But its no biggie..
Sent from my HTC Glacier using xda premium
jjbadd385 said:
You can flash any custom Rom, but before you do, unzip the Rom , and place the "boot.img" from the custom Rom, in your adb/fastboot folder, and flash it like you did to get it working again. I did it for awhile until I decided to relock & root properly.
**by the way..I hate the topic title! You are not stupid..you just made a MINOR mistake, which is the best tool you can use to learn by! I know how it is to be impatient, & just jump in and start flashing and not reading in advance. But its no biggie..
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
now if i have relocked the bootloader can i unlock it again? What wuld the command to flash be? fastboot flash ???? boot.img?
If you have relocked it, there is a guide, just do a search for it, or I will in a lil bit, I'm in a meeting. But basically just go to the wiki section & follow the downgrade guide...then the Ultimate s-off guide. But make sure you have the files that are in the links within the guides b4 you start, put them in the proper place (adb/fastboot folder)
Sent from my HTC Glacier using xda premium