Database Users

Fender Mytouch wont boot a ROM or Recovery or Fastboot - pls help

hi guys, i have a Fender Mytouch - which was running roms nicely till i booted back into recovery then selected restart/reboot and it went straight to the HBOOT screen - i press back to go to fastboot but nothing happens, i tried all key combos to get into recovery or fastboot but nothing. Completly stuck on this HBOOT screen :-(
PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02
Oct 21 2009
please ive tried to look other posts but they all can get into fastboot i cant, can someone help i didnt flash any spl or anything but 32a/32b roms over the last month - oh and it was running recovery-RA-sapphire-v1.6.2G before this happened

Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy

please can one of the smart guys on here give me assistance - been trying to look for the solotuion for 3 hours now

zerodi said:
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
Click to expand...
Click to collapse
Yes, if you have an engineering SPL, which you do not. You'll need to flash a stock ROM.

do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.

you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A

turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
lol Oops Didnt catch that. HEs right, you have the G1 radio going. Ours should be .12 at the end... I think lol. I havent had to mess with it for a while since Universal Androot works now. But again, you may want to start over if you know what your doing. Otherwise, time to go get a replacement because flashing the radio and spl, your probably going to brick it anyway.

crypysmoker said:
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
Click to expand...
Click to collapse
Thanks encouraging as your words are i didnt do anything / screw anything up all i did was reboot into recovery from the sparks rom then reboot/restart and it gave me this problem !!!

turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
Umm..what?
Your radio/SPL are fine. As for your situation, did you root using the goldcard method? If you did, try doing it over and see if it'll let you into fastboot after loading the engineering sappimg.
Sent using Tapatalk.

hey guys , i got into recovery now and wiped everything then flashed a rom but its stuck on the rom boot screen now, cannot boot into the rom

I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen

zerodi said:
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
Click to expand...
Click to collapse
Some roms take 10-15 min to boot up so you just gota have patience .
Also, any roms built with a Cyan kernel after 5.0.8 will work on our phones also.
IS the location working on that rom for you?
When it first cam eout I used it for months with no problems.. but then I tried to go back a few days ago and the weather/clock will not find me.

yeah with wifi it picks up my location for the weather just fine

zerodi said:
yeah with wifi it picks up my location for the weather just fine
Click to expand...
Click to collapse
only on wifi? thats weird. That would explain why it keeps asking for wifi to be on though lol.

You wont belive it but this f***in ohone has just gone and done the same problem again.....
I was charging it then powered off the device then turned it on after 30mins and its now stuck on the HBOOT screen AGAIN - grrrrrr i cant belive this thing

So now im completey stuck again - if this happens everything i charge this thing then thats not gonna be cool.
Im trying this method here http://forum.xda-developers.com/showthread.php?t=734617 , posted by DonJuan692006
but because the phone cant boot up into the OS adb doesnt see it as list of devices so i cant do the goldcard and start again.....
hmmmm i might throw this thing outta the window

Without a goldcard your not going to be able to go that route. If you've still got your Hero, you can use it to make the goldcard, or any Android powered device for that matter. Maybe just wait it out and see if it just starts working as before?

i have a successful goldcard.img from my Hero will take be ok to use for the Fender you thinks ?

damm-it just tried that and SAPPIMG gives an Incorrect Model ID - because im using the Hero goldcard
damm i dont know what else to try

does anyone have a Fender Goldcard img they would like to share with me - proberly wont work but you never know i might get lucky
cheers

Bricked?! Halp!

I've got a 32A mt3g 1.2.
PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.

MotoMudder77 said:
I've got a 32A mt3g 1.2.
PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.
Click to expand...
Click to collapse
First of all, wrong section. Moving to General. Next time your post will be trashed.
Secondly, your not bricked. Please check your definitions.
Third, try flashing the engineering bootloader via goldcard method and then fastboot flash recovery recovery.img (Amon_RaG or ClockworkMod for MyTouch/Ion).
Then power off your phone and hold the home button while powering it back on.
You should now have a recovery. From there try flashing the rom again. If it still doesn't appear to be doing anything then do a wipe and reflash.

Thanks for the tips, ill go for that right now.
sorry for the wrong section. Im wouldve put it in the Q&A section if there was one.
EDIT:
The only guide for a goldcard I've found requires a working phone. Mine doesnt work.

MotoMudder77 said:
Thanks for the tips, ill go for that right now.
sorry for the wrong section. Im wouldve put it in the Q&A section if there was one.
Click to expand...
Click to collapse
Seriously?
myTouch 3G, Magic General
Discussion about the T-Mobile myTouch 3G, HTC Magic (general Q&A, tips & tricks)

Ok Im blind, sorry.
But still have a bricked phone. and if the MT3g section is anything like the HD2 section. the only place to get answers is the DEV section.

Your going to have to find someone with an Android phone (any Android phone will work) to create the goldcard.

No need. If you got adb access you can flash the custom recovery from there (cm 6.1 has the SU and flash_image binaries).
Then simply load the custom recovery and fix your rom/OS (flash a new one or wipe or what ever).
Take a look at my guide (check my signature) and you will find all the steps needed. Just make sure you use G recovery and NOT H.
Good luck hunting!

To add to that, what radio are you using? You only gave us your hboot.
Sent from my HTC Magic using Tapatalk

MotoMudder77 said:
...
The only guide for a goldcard I've found requires a working phone. Mine doesnt work.
Click to expand...
Click to collapse
If you put the goldcard in and boot to your bootloader and press the back key it will load your goldcard and flash the engineering spl.
mumilover said:
No need. If you got adb access you can flash the custom recovery from there (cm 6.1 has the SU and flash_image binaries).
Then simply load the custom recovery and fix your rom/OS (flash a new one or wipe or what ever).
Take a look at my guide (check my signature) and you will find all the steps needed. Just make sure you use G recovery and NOT H.
Good luck hunting!
Click to expand...
Click to collapse
He stated that the rom won't load and he can't load the recovery. His spl is S-ON so from where I sit the goldcard method is his ONLY choice.
If that doesn't work then he's pretty much SOL.

Binary100100 said:
He stated that the rom won't load and he can't load the recovery. His spl is S-ON so from where I sit the goldcard method is his ONLY choice
Click to expand...
Click to collapse
MotoMudder77 said:
I can get into fastboot. but have no recovery. and CM6.1 just sits at the CM screen forever, but I have adb access at that screen.
Click to expand...
Click to collapse
Well, i disagree :0)
Look above.
My method should work with no problems... it will actually take less then 2 min ( 70 sec if done by me... YES i timed it ;0) OR 10 sec if using a script!)
DonJuan692006 said:
To add to that, what radio are you using? You only gave us your hboot
Click to expand...
Click to collapse
Good point :0)
If you have a ****ed spl/radio combo, then all this is for nothing and there are other issues to be fixed first!

Its kinda a difficult situation. I only have adb access for a little while while @ the Cm screen, then it goes away, and Im stuck at the CM screen. I have attemped the goldcard a couple times, but I dont have the correct card, and none of mine seem to work. Wife was shopping, and could only find SanDisk cards, and it didnt work.
Radio is 2.22.23.02
Im gonna attempt anything and everything I can think of to get it to work, but I might have to just run into town and find a damn Kingston card.

SanDisk cards work, got mine sitting in a box in my closet from where I rooted my phone. It may be a procedure that's wrong, not the SD card.

Ok well I managed to get the goldcard made, but when I get into HBOOT, it scans the card and states: no image or wrong image for the sappimg.zip.
file is @ the root of my sdcard, and wont read it, yet when I dont have the goldcard setup, it reads the file just fine. same exact file.

MotoMudder77 said:
Ok well I managed to get the goldcard made, but when I get into HBOOT, it scans the card and states: no image or wrong image for the sappimg.zip.
file is @ the root of my sdcard, and wont read it, yet when I dont have the goldcard setup, it reads the file just fine. same exact file.
Click to expand...
Click to collapse
make sure it's not sappimg.zip.zip

Binary100100 said:
make sure it's not sappimg.zip.zip
Click to expand...
Click to collapse
Its not. I've managed to get 2 goldcards succefully made, verified that multiple times, but it just doesnt work. It will not read the file from the SDcard.
I can put the same file on my sdcard from my HD2 and it will read it no problem.
I might play around with it more, but for now, Im calling it a brick.

Just to make sure, have you tried downloading the sappimg file again?

DonJuan692006 said:
Just to make sure, have you tried downloading the sappimg file again?
Click to expand...
Click to collapse
Yea, I've got 3 or 4 different ones on my PC, tried all, none work. It reads the sdcard and just passes it by.
Im really stumped. Followed the goldcard method to a "T" with 4 cards, 2 actually succeed in the proccess, but niether will get the sappimg.zip to read.
After installing the card into the phone and, attempting the Hboot, the HEX gets changed on the card also, just a few values, nothing exteme
IDK if thats normal or what, but it happens.

I don't think it should change anything so that may be your problem. I'm pretty sure I looked at mine after using it and it was the same. Weird.

well last resort, gonna turn my 8gb class 6 sdcard for my HD2 into a goldcard, and check.
after putting the sappimg on the sdcard w/o formating, goldcard or anything, the MT reads the sappimg, and attempts, but gets the error, of course. So im attempting the goldcard right now.
UPDATE:
It worked, got eng SPL on the phone, figured I would just follow CM guide for rooting to verify that it will work. but Im stuck:
# Once it finishes flashing, it should ask you to reboot. Reboot and let it load to the new "htc Magic" boot screen.
# Chances are at this point that the phone will not successfully boot. THIS IS NORMAL. Simply remove and re-insert the battery, as we're not done yet!
# Download the following zip file (the stock myTouch SPL and Radio) and extract it: [1]
# Copy the two files inside the zip to the root of your SD Card
# Take the latest Amon_RA recovery you downloaded earlier and copy it to the root of your SD Card.
# Download terminal emulator from the market and run the following commands:
flash_image flash radio /sdcard/radio.img
flash_image flash hboot /sdcard/hboot_7201A_1.33.0013G_091021.nb0
flash_image flash recovery /sdcard/recovery-RA-sapphire-v1.7.0G-cyan.img
Click to expand...
Click to collapse
Items in red are the issue, if the phone doesnt boot, how am I supposed to get into market?

Done and Done! phone is working again. I guess I should've tried my nice sdcard a while ago, but I didnt want to screw it up.
Oh well. Thanks for all the tips and ideas guys!

[Q] Rooted MT3G with CyanogenMod almost bricked

Sorry for creating new thread if there is some solution available on this. But I have searched everywhere and tried lot of things nothing works
Here is my hboot info
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP30000)
CPLD-10
RADIO-2.22.23.02
JUL 31 2009, 15:49:25
I had CyanogenMod 6 which became slow so I tried to reboot in recovery while USB was connected it didnt get into recovery mode and after reboot its stuck on CyanogenMod boot logo. When I try home + power it boots without going into recover mode and gets stuck in boot loop of CyanogenMod screen. I kept it on till the battery drained (almost 8 hrs 2-3 times) so dont think its issue with keeping it on for longer time.
So far I have tried all possible spamming.zip and spamming.nbh none of them work either get wrong model ID or update failed. I am not able to log in through ADB. adb devices doesnt show me any devices. But when i try fastboot devices i see my phone. But i can not push anything it says remote not allowed.
I tried goldcard but I cant get to the system files so cant swap the hex digits to create goldcard. I know someone would have a better idea.
Need some help from the experts .. please. Its been more than 2 weeks trying out all possible solutions but no luck.

Can you still boot into the rom you had installed?
Sent from my shad0w's sapphire using XDA Premium App

tvall said:
Can you still boot into the rom you had installed?
Sent from my shad0w's sapphire using XDA Premium App
Click to expand...
Click to collapse
If you mean boot and start the phone no I am not able to do that it gets stuck on cyanogen boot screen. I am able to boot in HBOOT and FASTBOOT though.

Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App

johnson8cyl said:
Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
He has s-on. If he could do that then this would be easy to fix
Sent from my shad0w's sapphire using XDA Premium App

Oh yeah. You're correct....... duh. Can he use someone else's gold card?
Sent from my HTC Magic using XDA App

happened to my mytouch 3g
it happened to me last week like that, the only thing that saves my was run the 1.5 SAPPIMG.nbh so i'm back to stock again then re-do everything allover

danxtian said:
it happened to me last week like that, the only thing that saves my was run the 1.5 SAPPIMG.nbh so i'm back to stock again then re-do everything allover
Click to expand...
Click to collapse
Can you point me to the file? I have used lots of sappimg.nbh so far none worked so dont mind trying this one. Hope thats the solution for me.

johnson8cyl said:
Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
No it says remote not allowed.

Rambad said:
Can you point me to the file? I have used lots of sappimg.nbh so far none worked so dont mind trying this one. Hope thats the solution for me.
Click to expand...
Click to collapse
for the old mytouch 3g
http://www.megaupload.com/?d=DQWW0Y9N
for mytouch 1.2
http://www.4shared.com/file/E2zhvzIr/SAPPIMG_Sapphire_T-Mobile_US_2.html
i got them from theunlockr website, hope they works for you..

danxtian said:
for the old mytouch 3g
http://www.megaupload.com/?d=DQWW0Y9N
for mytouch 1.2
http://www.4shared.com/file/E2zhvzIr/SAPPIMG_Sapphire_T-Mobile_US_2.html
i got them from theunlockr website, hope they works for you..
Click to expand...
Click to collapse
Tried again I get Main version older for original and model ID incorrect with mytouch 1.2

ooow sorry to hear that, well i guess you will need to get a goldcard..

danxtian said:
ooow sorry to hear that, well i guess you will need to get a goldcard..
Click to expand...
Click to collapse
I am unable to do that because I cant see my device in adb. Is there some way I can send my phone to t-mobile or htc and they can reset to factory setting? I am surprised that there is not a way to just flash rom with factory settings.

do you know anybody that have a HTC phone? i'm pretty sure some of your friends have one coz HTC phone are almost everywhere nowadays

Simple.... run these commands to establish your current status.
Based on your answers, i can properly asses your situation.
Code:
fastboot getvar version-main
fastboot getvar cid
Maybe we can fix this without the use of goldcard.

mumilover said:
Simple.... run these commands to establish your current status.
Based on your answers, i can properly asses your situation.
Code:
fastboot getvar version-main
fastboot getvar cid
Maybe we can fix this without the use of goldcard.
Click to expand...
Click to collapse
Thanks for your help, this is what I see. Fingers crossed
version-main: 1.92.531.1
cid: T-MOB010_Y∞²

Please recheck that version nr... you are sure its 1.92 or is it 1.94?

Download this:
https://rapidshare.com/files/433519738/1.94.531.1.nbh
rename it to sappimg.nbh
But it on the sdcard and flash it using hboot mode (hold volume - and power together. The "-" sign symbolize decrease of volume).
It should get you back to stock :0)

mumilover said:
Download this:
https://rapidshare.com/files/433519738/1.94.531.1.nbh
rename it to sappimg.nbh
But it on the sdcard and flash it using hboot mode (hold volume - and power together. The "-" sign symbolize decrease of volume).
It should get you back to stock :0)
Click to expand...
Click to collapse
You are the man (or Women) it worked smooth I am now back on 2.2 with official t-mobile update. I hope this helps others who are still looking for a solution.

[Q] Unable to fix s-off

Hey,
I have a mytouch 4g and I had it perm rooted as well as s-off. I recently attempted to unroot my phone and made a mistake of attempting to do this while having the wrong radio. Now I am unable to flash any new kernals or radios to my phone. My wi-fi doesn't even work with the radio I currently have flashed. My phone reads this in boot
GLACIER PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.08.04.30_M3
eMMC-boot
Sept 27 2010, 11:12:59
is there any way for me to fix this problem and get my S back on??
Any help is greatly appreciated.
I am currently running CyanogenMod 7.0.3

Re-root your phone, then flash the new radio, an stuff you need. Get s off also
Sent from an android,thats makes steve jobs jelous.

Thanks
Mr.Highway said:
Re-root your phone, then flash the new radio, an stuff you need. Get s off also
Sent from an android,thats makes steve jobs jelous.
Click to expand...
Click to collapse
My phone is actually still rooted from when I used to have it rooted, if I flash the radio I need to use to make s-off work, will it work? i thought the entire purpose of s-on was to prevent me from being able to flash any radio?

http://forum.xda-developers.com/showthread.php?t=858996, follow that guide, its the saner one I used
Sent from an android,thats makes steve jobs jelous.

The best option for you would be to flash the PD15IMG from the hBoot. It will flash the radio you should have along with turning the s-on as long as you didn't use ./gfree to root the phone.

neidlinger said:
The best option for you would be to flash the PD15IMG from the hBoot. It will flash the radio you should have along with turning the s-on as long as you didn't use ./gfree to root the phone.
Click to expand...
Click to collapse
in order to flash the radio from the h-boot, wouldn't i need to have s-off? Right now i have S-On so I am unable to flash radios

Terryshanks45 said:
in order to flash the radio from the h-boot, wouldn't i need to have s-off? Right now i have S-On so I am unable to flash radios
Click to expand...
Click to collapse
The PD15IMG is the entire stock T-Mobile ROM. You do not need to be rooted or have s-off to flash that.
you are thinking of the radio files. You do not want to flash that.
hear read this
http://theunlockr.com/2010/12/16/how-to-unroot-the-t-mobile-mytouch-4g/

Hey,
I just tried that method with the stock PD15IMG.zip file and I got the message
Main Version is older!
Update Fail!
Press <POWER> to reboot
do you have any idea what could cause this to happen??
Would I brick my phone if i performed the factory reset from the HBOOT menu?

Terryshanks45 said:
Hey,
I just tried that method with the stock PD15IMG.zip file and I got the message
Main Version is older!
Update Fail!
Press <POWER> to reboot
do you have any idea what could cause this to happen??
Would I brick my phone if i performed the factory reset from the HBOOT menu?
Click to expand...
Click to collapse
if your s-off all a factory reset will do is wipe everything on your phone.

neidlinger said:
if your s-off all a factory reset will do is wipe everything on your phone.
Click to expand...
Click to collapse
so theres no point in me performing the factory reset...do you have any other suggestions as to what I could to to fix my phone?? I realize the problem lies with me having the wrong radio but I can't figure out how to get s-off in order to flash the stock radio and the stock rom gives me an error when I attempt to flash it...

Terryshanks45 said:
so theres no point in me performing the factory reset...do you have any other suggestions as to what I could to to fix my phone?? I realize the problem lies with me having the wrong radio but I can't figure out how to get s-off in order to flash the stock radio and the stock rom gives me an error when I attempt to flash it...
Click to expand...
Click to collapse
IIRC you can flash radio files via fastboot but i do not know the commands to do it.

neidlinger said:
IIRC you can flash radio files via fastboot but i do not know the commands to do it.
Click to expand...
Click to collapse
Thanks, I am logging into the IRC chat to see if someone there can help. I appreciate your help, do you know if there may be a guide on how to flash radios via fastboot on any website? i havent been able to locate one

Problem with myTouch 3G

So I was "flashing" a new ROM via ClockworkMod Recovery v2.5.07 earlier on my phone, and the battery was near dead, so I decide to plug it in. I didn't bother to think/realize it was plugged into the USB port on my computer, and as I did so, the installation stopped and the phone turned off. I turned it back on, to find the "MyTouch 3G" green splash screen either stuck and the phone eventually turns off, or it loops, and the phone keeps rebooting. I've tried flashing flashing the ROM again and some different ROMS I believe, with no luck. Yes I can get to the recovery screen and I can get to hboot/fastboot. Any direct troubleshooting would be very much appreciated. I don't really care what ROM I have on my phone at the moment, I just need something that works. My old blackberry is missing several keys and the rest barely work, so it would be nice having this one back up and running I've searched other threads and other forums with no luck so far. PS I don't have a Nandroid backup...thought I did, guess not though.
SAPPHIRE PVT 32B ENG S-OFF H
HBOOT-1.33.2010 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
Thanks,
Shane

Flash recovery AmonRa 1.7.0G first
Code:
fastboot flash recovery recovery.img
Then search 1.33.0013 or 1.33.0013d and flash it via
Code:
fastboot flash hboot hboot.img
You will have
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
and able to install new 32B roms (for radio 2.22.28.25) via recovery...
p.s. Don't flash anything when battery at 30% or less

Most roms require the new radio and spl that came with the froyo update. You have the radio, but you need the 1.33.0013 or 1.33.0013d spl.

tvall said:
Most roms require the new radio and spl that came with the froyo update. You have the radio, but you need the 1.33.0013 or 1.33.0013d spl.
Click to expand...
Click to collapse
Thx for comment, i updated mine...

So a problem, I accidentally flashed the recovery-RA-sapphire-v1.7.0G-cyan.img, then flashed the spl, and now of course I don't have the ability for fastboot...problem?

Shano56 said:
So a problem, I accidentally flashed the recovery-RA-sapphire-v1.7.0G-cyan.img, then flashed the spl, and now of course I don't have the ability for fastboot...problem?
Click to expand...
Click to collapse
Do you have ability to load recovery?
p.s. fastboot commands are locked in hboot 1.33.0013 (1.33.0013d)

yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?

Shano56 said:
yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?
Click to expand...
Click to collapse
May be need special kernel for radio 2.22.28.25? What requirements for CM6?

Not sure, but it says I'm running 6.1 now. And I downgraded my radio to 2.22.23.02.

Shano56 said:
yeah I know they were blocked, but I figured out how to access via adb
so I got the proper recovery image on...and flashed CM6, however it's still looping on the MT3G splash screen
Edit: Weird - I tried the 5.0.8-DS and it worked. I appreciate your help..any clue why 6 don't work?
Click to expand...
Click to collapse
Ezterry released a different cm6 for people that had problems with the first one, I think it was a kernel issue
Sent from my HTC Magic using XDA App