Hi my samsung galaxy s does not connect to Mac or P.C i have factory reseted it.. Development checked unchecked mass storage mode checked unchecked i do not have the option to set the connection ASK ON CONNECTION....
its on Android 2.3.4 all it does is charge when i connect to my computer thats it the screen doesn't flash back and fourth like the common Galaxy S USB Connection problems...
Please can some one help also is there any way i can root the phone with out odin i can bluetooth files to my Galaxy S ??? Thanks.............
Related
helllo every body
i have a problem.i was updating my galaxy s through samsung kies..it got stucked after 30%..i disconnected it n then tried to update through odin multiloader..again it got stuck.i tried twice n it got stuck..now the phone goes to download mode..but cant be detected by computer..can any body help me plz
do you have another PC?
it's your windows + PC problem
best way is on WinXP 32bit on a good PC with working USB ports
some PC have buggy USB ports
unplug everything else from the USB ports except for mouse and keyboard (in case they are USB mouse/keyb)
Hi frnds
My pc do not syncing with my sg3
either with mass storege or with samsung kies
when i connect with usb it sound click & nothing happened..
help me...
lovelyample said:
Hi frnds
My pc do not syncing with my sg3
either with mass storege or with samsung kies
when i connect with usb it sound click & nothing happened..
help me...
Click to expand...
Click to collapse
Maybe it is your launcher. I had that problem some times ago. After I uninstall launcher pro I could sync.
I suggest you to try removing the Samsung device from the Devices manager as well as the driver. Then try reinstalling the driver via Kies (Tools-Install driver). Try connecting to PC then.
P.S. - Try enabling "Ask on connection" USB mode in Settings. Then when you plug in the cable, you will get a choice of modes for the USB connection.
I had the same problem on 2.1
Try to wipe cache partition on the recovery mode: it worked for me and i didn't lose any data.
Anyone familiar with an error trying to connect to Kies that says "cannot start the service on the device, please disconnect then reconnect"?
The tab doesnt go into "Kies mode".
Possibly something to do with the kernal?
uncheck USB debugging!
rogconnect said:
uncheck USB debugging!
Click to expand...
Click to collapse
This is probably it right here ^ but also, K Rich, let us know what ROM and Kernel you're using. Thanks!
well, its not USB debugging. possibly starburst rom or pershoot kernal as the issue?
I had same problem.
The quick solution is factory reset.
Or you have to find a file with strange(illegal) name.
I suppose kies scan the files on tab during connection and because the illegal name found the connection process fail.
Happens everytime
It happens to me everytime. Easy way to check if Kies is broken is to try and enable it in settings "Wireless and networking". If you select Kies via Wifi and a dialog does not pop up then the Kies service is broken. Only way to fix it then for me is a factory reset which is a pain since I have to reinstall everything then.
Does anybody know of an easier fix. I am on a p7500 32Gb 3G and Wi-fi. Also as a side note: this kernel also does not seem to work with Plex streaming. No fix unless I root I think. This is the south african vodacom/fone galaxy 10.1
Regards
That same error message just started happening to me too. My SGS i9000m used to connect to Kies fine, but I just accepted a new Kies update and let it install, and now in Kies ver 2.0.2.11071_128 it gives me that error message.
Same thing just happened to my girlfriend, who has the identical phone to me. Once she accepted the recent Kies update, it doesn't see her phone.
But, Windows 7 (64-bit, for both of us) does see the phone.
And, the Kies Air app does work for me!
My phone is "lightly rooted" with Super One Click root. (As in, I haven't used Odin to put new ROM's on it, and I haven't messed with the phone much.)
Is there a way for me to get Android 2.3 onto it, through Kies or Kies Air?
Thanks guys. Sorry, I'm a noob.
hope it can help
I had the same problem with galaxy 2 and tab 8.9 (gt-p7300)
With galaxy 2 solved by shut down the phone (press power for 10 sec) with kies on and usb connected to comp.
With tab 8.9 the only way that worked for me is a factory reset, the same method of galaxy 2 was not working.
I hope it can help
reboot+usb connected -> fixed Kies
pippone121263 said:
I had the same problem with galaxy 2 and tab 8.9 (gt-p7300)
With galaxy 2 solved by shut down the phone (press power for 10 sec) with kies on and usb connected to comp.
With tab 8.9 the only way that worked for me is a factory reset, the same method of galaxy 2 was not working.
I hope it can help
Click to expand...
Click to collapse
Thanks dude, the reboot of my galaxy s2 with usb connected made Kies detect my phone again.
I owe you a beer, maybe two.
Cheers,
Stefan.
I noticed that disabling pattern protection, allows Kies to recognize the tablet.
EDIT: not always, sorry
Even though this is an old thread, I would like to confirm that rebooting SGS 2 with USB connected, caused Kies to recognize my phone. Another method that works with limited success is changing the USB port on the PC to which the phone is connected.
Thanks.
Hello I have my galaxy note 4 bricked and I can't fix it with Odin because have problem connecting to a PC. When I connect the phone, the PC said "USB Device not recognized". I installed all drivers correctly. I verified with my wife's note 4 and its recognized correctly by the pc so I'm sure the drivers are not the problem. Also check on all usb ports and with many cables so the problem is with my phone. I can put the phone in downloading mode without problem but can not connect to Odin and Kies. If somebody know how to help me I'll apreciate so much.
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.
GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager
loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?