Okay, I've seen a lot of "I bricked my Nook Touch" posts around, and floating everywhere but none of their solutions worked. I used the TouchNooter step by step, got the checksum right, did everything right.
Loaded the SD card, restart the nook, BAM! Got stuck on the dreaded "Rooted Forever" screen.
Here's what I've tried so far:
redoing the process
booting without sd card
booting again WITH sd card
8 failed boots
factory reset (bottom left and right and the power button)
30 seconds power button hold, 10 seconds without, 10 seconds holding it down
I think that's about it. i'm just about ready to throw this thing out, seriously. Any other ideas?
I think I'll keep on trying to do the 8 failed boots thing
wajanus said:
Okay, I've seen a lot of "I bricked my Nook Touch" posts around, and floating everywhere but none of their solutions worked. I used the TouchNooter step by step, got the checksum right, did everything right.
Loaded the SD card, restart the nook, BAM! Got stuck on the dreaded "Rooted Forever" screen.
Click to expand...
Click to collapse
As you're able to power down and reboot your Nook I wouldn't even call it bricked. Bricked is when your hardware fails or you manage to screw up your bootloader
I always get stuck on the "Rooted Forever" screen or boot animation when using either Noogie or TouchNooter image, but the process still works, so this doesn't really indicate that something went terribly wrong.
wajanus said:
Here's what I've tried so far:
redoing the process
booting without sd card
booting again WITH sd card
8 failed boots
factory reset (bottom left and right and the power button)
30 seconds power button hold, 10 seconds without, 10 seconds holding it down
I think that's about it. i'm just about ready to throw this thing out, seriously. Any other ideas?
I think I'll keep on trying to do the 8 failed boots thing
Click to expand...
Click to collapse
1,2,3: Unless a simple reboot without the SD card helped this ain't gonna do much good.
4: This usually helps if you can mange to trigger it, it will properly replace both boot and system.
5: This is completely useless. As far as I've seen all it does is clean your /data/app folder and not much more.
6: Never heard of this, can't imagine what it's supposed to do.
One thing you can try the original NookDevs rooting process , see if that kicks your boot into working order again. This is my preffered rooting method.
Your best bet is trying to trigger the 8-failed boot recovery. I've done this a few times on my N2 and it can be a little tricky.
May I ask what version you're running? 1.0.0 or 1.0.1 ?
Thanks.
As far as 6 goes, I saw it on a few forums on the 'net and it was said to break the boot cycle.
I suppose it's not "completely bricked" but I've spent so long with it, trying to get it to work that I'm really, about to ready to throw it away.
I'll try the original guide, hopefully that will trigger it.
It's a 1.0.0, I got it a week after it came out (and it's been bricked since the first TouchNooter came out).
Also, how should I try to do the 8 failed boot recovery? Half the time, it's hard to tell if it's booting, or if it's turned off o.o the only difference I saw is when the Nook is plugged in. Any ideas?
wajanus said:
Thanks.
Also, how should I try to do the 8 failed boot recovery? Half the time, it's hard to tell if it's booting, or if it's turned off o.o the only difference I saw is when the Nook is plugged in. Any ideas?
Click to expand...
Click to collapse
First you need to check whether long pressing power will reboot or just power down you Nook. From my experience a unit that "hangs" on boot will power down when the power button is pressed for at least 10 seconds, while a successfully booted unit will simply reboot.
The following is based on my experience with "hung" units:
Prereqs:
- No USB cable attached (not even charger!)
- No SD Card inserted
Steps:
1: 12 second press (to be sure) for power down
- most likely you'll see no change in the screen!
2: Wait 5 seconds for Nook to settle
3: Press power for 4 seconds to turn it back on
4: Goto step 1 as soon as you see the screen flicker!
- Do not wait for boot animation, a simple flicker is enough!
Repeat 8 times
Also, see this thread for a factory restore image
I wonder, if desperate, whether JTAG could be used.
It is REALLY too bad that some people are so impatient.
When it says "rooted forever", that does NOT mean that the process has completed. It means that the process has ONLY STARTED. Give it some time.
WAIT.
Wait 20 minutes.
It will complete.
Be patient.
If you have to, pull out the battery from the thing.
Then put in the special sdcard.
Plug the battery back in, plug the charge plug in.
Turn on.
WALK AWAY AND COME BACK TOMORROW.
Sorry, but I wouldn't call myself impatient. I pre-charged my nook to full charge before attempting rooting. I left the Nook alone without restarting it until I realized it may need charging again. It was THEN that I tried to restart it.
"WALK AWAY AND COME BACK TOMORROW" <- Yeah, I did that.
However, I do admit, I was expecting a quicker root/rom flash I'm used to my Samsung Vibrant
ros87 said:
First you need to check whether long pressing power will reboot or just power down you Nook. From my experience a unit that "hangs" on boot will power down when the power button is pressed for at least 10 seconds, while a successfully booted unit will simply reboot.
The following is based on my experience with "hung" units:
Prereqs:
- No USB cable attached (not even charger!)
- No SD Card inserted
Steps:
1: 12 second press (to be sure) for power down
- most likely you'll see no change in the screen!
2: Wait 5 seconds for Nook to settle
3: Press power for 4 seconds to turn it back on
4: Goto step 1 as soon as you see the screen flicker!
- Do not wait for boot animation, a simple flicker is enough!
Repeat 8 times
Click to expand...
Click to collapse
Will try. Currently, my nook doesn't even turn on -.-
wajanus said:
Will try. Currently, my nook doesn't even turn on -.-
Click to expand...
Click to collapse
If you can't get it to work, try nookRestore. It basically tricks the nook into thinking you've restarted eight times already.
wajanus said:
Will try. Currently, my nook doesn't even turn on -.-
Click to expand...
Click to collapse
How do you know it's not turning on?
Thread moved. Development goes in the development section, questions in the general section. Thanks.
okay, fast forward a few months forward. I did figure out that the nook DOES turn on but it's probably stuck on an infinite loop. I was successful in booting several different "recoveries". There was a tool a few months back that removed root. The "recovery" booted but didn't help.
Since then I tried the new CWR and it booted! I was so excited. I did the whole "factory reset" and deleted all of the caches. Didn't help, the screen still showed "Rooted Forever". I tried to use the "Touch Formatter", unfortunately, that didn't help either. I used the TouchNooter again but again, nothing happened.
Any suggestions? I haven't seen a "stock" image or anything like that to boot into anywhere.
If your partitions are still intact and you haven't overwritten your rom-partition by writing a touchnooter or cwm img-file directly to the nook you could try the following:
-Create a sd-card with cwm,
-download nook_1_1_update_cwm.zip from http://code.google.com/p/nst-recovery/downloads/list and copy it to the sd
-boot into cwm
-use the install zip from sd-card function to apply the update.
The nook_1_1_update_cwm.zip contains the original update to 1.1, it is just repacked to be usable with cwm. That means, if you want root, you have to root afterwards.
The nook_1_1_update.zip that you get directly from Barnes & Noble is a standard zip file with with a signature attached to the beginning. You can strip off the first 0x1A8 (424) bytes and open it with any unzipper.
Renate NST said:
The nook_1_1_update.zip that you get directly from Barnes & Noble is a standard zip file with with a signature attached to the beginning. You can strip off the first 0x1A8 (424) bytes and open it with any unzipper.
Click to expand...
Click to collapse
I actually found 7-zip can open it without having to do anything to the zip first.
you guys are AMAZING! I couldn't find the 1.1 anywhere. I'm downloading it and installing it later on today. Will update on progress
Steps work
ros87 said:
The following is based on my experience with "hung" units:
Prereqs:
- No USB cable attached (not even charger!)
- No SD Card inserted
Steps:
1: 12 second press (to be sure) for power down
- most likely you'll see no change in the screen!
2: Wait 5 seconds for Nook to settle
3: Press power for 4 seconds to turn it back on
4: Goto step 1 as soon as you see the screen flicker!
- Do not wait for boot animation, a simple flicker is enough!
Repeat 8 times
Click to expand...
Click to collapse
Steps 1-4 solved an infinite loop loading problem with Nook Simple Touch (firmware 1.1).
okay, that seems to have helped some. The Nook boots into a "Read Forever" with a "starting up" thing on the bottom (basically the way stock looks) instead of "Rooted Forever" but it seems like it's in a bootloop, stays on the same screen and never progresses. I'm going to try the n2T to trigger a factory reset. Hopefully, that'll work :/
n2t did not work. Not sure what to do next.
Related
I've heard about how it's pretty much impossible to brick the nook... Mine seems about as useful as a brick though. I was trying to set up a dual boot following these instructions. Basically, I had HC installed to the internal memory. backed it up, formatted system and data, then flashed update-nc-stock-1.2. CWM said that was successful. Then I rebooted with my CWM SD card out. Screen said "read forever" or whatever, then went blank. I waited for about 5 minutes, and pressed the power button. The screen went from an 'on' blank to an 'off' blank. Since then, I haven't been able to get it to turn on at all. Just an 'off' blank screen with no signs of life, even with charger cable connected. Tried it with CWM SD in and out. None of the buttons seem to do anything...
Thanks in advance!!
I'm pretty new to the Nook having just got it today, but I did some reading prior to attempting anything to see how easily I could back out if I had to.
Have you tried basically starting over (ie. Let go of the multi-boot dream for a bit and get back to basics)
You know, take a SD card, use diskimager to put the clockwork 3.0.2.8 image on it with the CM7 full ROM and boot to that, then format system, data and cache with clockwork and finally install the CM7 zip image (and gapps I guess) just to get going again.
If it all works, maybe take another run at whatever you are trying to do with the multi-boot stuff.
Thanks for the reply.
Sounds awesome; problem is I can't get the thing to do ANYTHING. boot period, into recovery or otherwise. I plug it in and it displays nothing - no 'wait 15 minutes and try again'. Just a black screen no matter what I do. I have an SD card with recovery on it, and i've tried making it do something with or without the SD card. No luck.
Good luck with your nook; I had really been enjoying mine.
So holding the power button for 10-15 seconds doesn't do anything?
Or when you plug in the power does it try to boot?
I mean in a complete worst case scenario you could grab yourself a T5 and open it up, disconnect the battery, and then reconnect it.
Then something is wrong with your Recovery SD card, as no matter what, hardware dictates that it reads the sd card first. The problem with what you did through dual boot methods is you resized partitions. So even if you do back out of all of this, you're going to be losing space unless you setup dual boot.
Recreate the CWM recovery card, either redownload the image and reburn it. Find a different one or something else, because it should load on startup.
Thanks for the help!
Reformatted SD again, then tried powering up with the power cord unplugged. Apparently it won't boot into recovery as long as the power cable is in, and whatever the boot was on EMMC was messed up. Happily running stock 1.2 now, next step, dual boot with HC!
Anyone know how I can delete this thread as it's pretty unnecessary?
Hello,
So i've tried to root the nook. Copied the touchnooter on my card, booted the nook. And then : forever stuck on the "root forever" or the "read forever" (when i get the card off)..
The hard reboot (20 sec on power off) doesn't work and i'm stuck at this "read forever" screen.
Is there a way to recover the nook ?
Thanks.. !
When doing the hard power off (long press) the screen doesn't usually change and you might be fooled into believing nothing happened.
Have you tried to let the unit settle for 10 seconds and then press power for a few seconds to see if it tries to boot?
Hey,
thanks for replying. I have tried a 30 sec hard boot + a reboot try but nothing happened. It freezes on the "nook is starting screen".
I afraid i have broke my device... But strangely i followed the rooting steps and nothing seemed to do wrong.. I guess.
Bye
If you can in fact get the unit to start booting, just long press power (10s +) as soon as you see the unit try to boot to interrupt the boot, then power it on again and repeat this procedure for 8 times (sucks, yes I know) and you should drop into factory reset.
Ok so i have to say : WTF !
So this morning i looked at my nook and saw that it still was on the "reading forever"/"starting" thing. As i saw your advice i tried to boot 8 time..
On the first boot attempt : it worked ! So maybe is was the eighth..
The nook started and asked me if i wanted to continue with android guy or "es something"... so i pressed android guy..
SO now i don't really know if the procedure went well ? Is it supposed to be rooted now ?
Thanks anyway for the time you took replying !
I hope my english is not too hard to read.
Bye,
By "android guy" I guess you're referring to the Android Welcome screen?
That would suggest that the Touchnooter went trough successfully.
Did you get Go Launcher and ButtonSavior up and running?
IIRC, whenever you do a fresh boot and try to use ButtonSavior you'll get a notice saying ButtonSavior has been granted superuser access, which would indicate that you're successfully rooted.
I had a similar problem, using touchnooter 1.11.20 and it was too quick. Maybe 45 seconds, removed card and restarted. Stuck in a boot loop, on tne "Nook" screen with the little blocks move across the screen and just keeps restarting. Fortunately I made a backup and was able to restore. Not sure what the problem is but I tried TouchNooter 5 times, downloaded it twice, wrote it to the SD cars 3 times and same result, Stuck on the nook screen, animation gets to the 4th dot and restarts. Tried salsichaNooter .4 with the same result. Any ideas on what the problem could be? It would be really nice if I could get a decent reader on this thing.
I made my life a little easier by having 2 micro SD cards to use, nookie on one and touchnooter on the other. I also made sure I had a good backup of my original ROM by opening the image with 7zip and the nook with partition wizard and verifying they were the same. At least I can gat it back to a working stock rom.
Why dont you try my new method?
http://forum.xda-developers.com/showthread.php?t=1346748
PS:
..... insomnia Sucks......
Thanks, I'll see if this works.
Not really insomnia, trying to get this fixed before I have to put my wife on a plane. It's her nook touch, I have a color, it was so much easier.
I'm having a similar problem: I used SalsichaNooter, I let Rooted Forever to be on the nook screen for an hour, there were no messages on the screen no progress indication of any sort. I did a hard reboot after an hour and it seems at least some part of the rooting script worked - but how do i know the nook was rooted all the way through since it didnt reaboot during the rooting process as it should?
The Device:
Nookcolor Refurb - came with stock 1.2 installed. Rooted with CM7 - initially had boot partition problems and went back and did the fix for it. (was using an old CWR, so had to redo that, too). Worked mostly fine for a few weeks. Had a little trouble installing the recent cm7 stable update. But after clearing and redo, no problems. Then I updated Adobe flash to 10.3 through the market. bad, bad, bad. (I've discovered). It has gone into a bootloop, but it doesn't even get in far enough to bring up CWR either internally or on a bootable SD card. It brings up "loading" - whether in CM7 or CWR - then shuts itself off. I have tried the 3 button salute and 8 interrupted boots, but neither works in any way. Is there something else I can do?
Also, a side note, the device will not charge to green light - even if charging overnight. At first I thought it was a battery issue, but after a day of combing the boards, I'm thinking bootloop from hell.
Help!!!!
Are you running CM 7 internally or from a card? If internally, try making a bootable CM 7 card and booting from that.
I am running it internally. The device will not boot from a card or internally. It doesn't get far enough into the boot before it loops for CWR to start up - either internally or off the sd card. I can get to the boot menu (hold down n when it starts up), but it doesn't boot off any of the options there, just goes to black screen.
What happens when you do the 8 failed boots?
Nothing really happens with 8 failed boots. I think it terminates the boot process before it gets far enough along for it to "count". Loading comes up, I count one thousand one....all the way to one thousand seven. Then it shuts off, often reboots itself. Same deal with CWR. Loading comes up, count to 7, shuts off. I can get to the boot menu in CM7, but I it doesn't respond when I request any type of boot from anywhere. Either hangs or restarts.
I'm trying ADB, but it won't stay connected. Flicks on right at the end of the loading process and then shuts down. It really sucks.
Shelly, shoot me a pm... i'll give ya my phone number and we'll work on getting it going.
Sorry if this is redundant, but in very basic troubleshooting have you tried charging your Nook? It probably is more complicated/serious than a low battery, but it wouldn't hurt to rule it out.
I finally did get it to charge to green light. Didn't make a difference. I can get it to hang sometimes when it's trying to get into CWR. And it will stay on the Boot Menu.
Just a side note, I have another NC that I've had since Jan. Autonootered, Manual Nootered, CM7ed, brought back from the dead many a times.
Dizzy Den - am shooting you a message shortly. Thanks.
Has this been solved? If yes how?
Could you find a solution to your problem?
I'm having the same issue now. Bought a Nook Color in November, Autonooted, flashed recovery from ROM Manager, flashed CM 7.1.0 internally from downloaded ZIP files via ROM Manager, was working just fine for a week, stable, fast, perfect. Overclocked to 1200 MHz after a few days which made the experience even nicer.
Then installed and started Google Maps which didn't work - the Nook turned off on launch of Google Maps app.
I had set Wifi to "stay on all the time" beforehand (which might have been bad because it creates Sleep of Death syndrome as i now know).
Now when i turn it on it shows "Loading" for 7 seconds and then the screen turns off. This is when booting CM, when booting the internal recovery (shows "loading recovery" for 7 seconds) and when booting from any SD card image (i've tried at least 10 different bootable SD card images, different cards and different card readers).
It recognizes and tries to boot off SD cards - i get different "Loading" screens depending on the image, honey-colored for a honeycomb image, with two skulls for a recovery, ... So that works.
The nook seems to be in some kind of "on" state because i need to hold the power button to turn it off before i can get it to boot again.
I can get to the boot menu as you could, but booting from there doesn't do anything at all. So the hardware seems to be OK because the boot menu itself works well and for more than 7 seconds.
I can charge it and it goes to a green light so it's no battery issue.
The nook does not show up on USB - well once it did for a second but that was it.
I even tried to let the battery run completely empty so internal registers can get reset - didn't change anything.
Help! Is it bricked now?
Going to a B&N store isn't an option btw - the next one is 6500 km from here.
(This is the first time i ever ask for help on a forum. I am running a ZTE Blade with CM7 just fine, and I've been stuck often enough but always found a solution myself...)
Gunnar
Have you guys tried this:
http://forum.xda-developers.com/showthread.php?t=1308304
Or completely restoring it to stock:
http://mrm3.net/nook-color-recover-any-bricked-device/
Tried, can't get far enough
Kingdruid, thanks, yes i've tried both of those links - sadly they don't help at all because i can't even boot SD card recovery images...
I tried various recovery images including the newest clockworkmod, but i am still stuck They all work for 7 seconds only.
So yes, a nook can actually be bricked it seems.
G.
tralulu said:
Kingdruid, thanks, yes i've tried both of those links - sadly they don't help at all because i can't even boot SD card recovery images...
I tried various recovery images including the newest clockworkmod, but i am still stuck They all work for 7 seconds only.
So yes, a nook can actually be bricked it seems.
G.
Click to expand...
Click to collapse
When you overclocked it, did you notice it getting hotter than usual? I wonder if it was due to the overclocking. All the users I see with unrecoverable nooks is after they overclocked.
No, i did not notice much heat. And it was working well in its overclocked state for a few days.
Do you think it's CPU is fried now?
tralulu said:
No, i did not notice much heat. And it was working well in its overclocked state for a few days.
Do you think it's CPU is fried now?
Click to expand...
Click to collapse
I own 4 of them so I would prefer the term "Unbrickable", but at this point I'm not really sure.
Try 8 failed boots and see if you can get into recovery to reset to factory.
cant get it working
so first noob post
i used this thread to root my nook color
http://forum.xda-developers.com/showthread.php?t=1000957
problem is i have followed the steps and re done it about 5 times and every time i turn on the nook it goes right to read forever and runs the stock OS
nook 1.2 brand new, and 8gig SD card
when i boot i hold the power button for the 5 seconds, am i missing something?
tntviper1 said:
so first noob post
i used this thread to root my nook color
http://forum.xda-developers.com/showthread.php?t=1000957
problem is i have followed the steps and re done it about 5 times and every time i turn on the nook it goes right to read forever and runs the stock OS
nook 1.2 brand new, and 8gig SD card
when i boot i hold the power button for the 5 seconds, am i missing something?
Click to expand...
Click to collapse
how did you write the image to the SD card? you can't just do the write button in winimage, you have to use the "convert virtual hard disk image to drive" or something... really should be mentioned in the n00b guides.
Sequence in winimage:
Disk->Use disk (whatever your sd card is)
Disk->Restore virtual hard disk image on physical drive (select the image you're trying to write)
Click ok on the warning and you should have a boot disk
"Write disk" is prominent but just copies the files to the disk, not resize or make it bootable.
Nope - no change
DizzyDen, nope, 8 failed boots does nothing. Just fails 8 times, no restore.
Hi guys. I tried to make a backup of my Nook Simple Touch Glowlight (NSTG) before rooting it using Noogie image file, but I now have a bricked NSTG. This is what I did:
1. Using WinImage on my Windows 7 computer I wrote the Noogie image to a Sandisk 8GB micro sd card.
2. I turned the Nook off completely.
3. I inserted the micro sd card into the NSTG card slot.
4. I connected the NSTG via USB cable to my computer and the Nook rebooted and displayed the ROOTED FOREVER screen.
5. Before I did anything else, I ejected the NSTG by right clicking the NSTG icon on my desktop and detached the USB cable from the NSTG. I just wanted to make sure I could reboot into my NSTG before making the backup.
6. The NSTG never rebooted.
7. I removed the battery and the ROOTED FOREVER screen is still displayed.
8. I reconnected the battery and it will still not reboot.
Any suggestions as to how I can reboot the NSTG.
Bill
When you have the rooted Forever screen it takes quite a bit of effort to get the nook to restart.
Press and hold the power button numerous times. Hold the power button for at least three full seconds, even longer.
I actually pressed the back switch several times and did so for more than a few seconds, but to no avail. I going to leave it alone for a while with the battery unplugged and then plug the battery back in and see what happens. Any other suggestions are welcome.
Bill
I have tried to reboot the NSTG holding the back button several times, it does not reboot. I have tried to root with an sd card and the NSTG does reboot to run the software on the micro sd, but it hangs at the rebooting without the micro sd in the NSTG. The NSTG does boot from the micro sd, but it will not complete the process of rebooting when I reboot after installation of the software. I have tried the Alpha format touch 2 with the clock work mod rc2 and the NSTG will not complete the rebooting after I remove the micro sd card. I have tried the tinynoot with the clock work mod rc2 and it is the same result. Does anyone know how I can get the NSTG to reboot without the micro sd card to get it working again?
Bill
I am not clear on something - at first it seems you are saying the nook does not reboot
briv said:
I have tried to reboot the NSTG holding the back button several times, it does not reboot.
Click to expand...
Click to collapse
but then you describe how you have rooted via alpha format touch and tinynoot.
When you root via these two, I presume you using the clockworkmod sdcard - so do you get the nook to power up to the clockworkmod screen?
When you have the rooted forever screen - leave the battery in, remove the sdcard - and then press and hold the power button numerous times.
Do you have UK or US nook?
ladykayaker said:
I am not clear on something - at first it seems you are saying the nook does not reboot
but then you describe how you have rooted via alpha format touch and tinynoot.
When you root via these two, I presume you using the clockworkmod sdcard - so do you get the nook to power up to the clockworkmod screen?
When you have the rooted forever screen - leave the battery in, remove the sdcard - and then press and hold the power button numerous times.
Do you have UK or US nook?
Click to expand...
Click to collapse
I have the US NSTG. At first I had the ROOTED FOREVER screen and tried rebooting exactly as you suggested, but it did not work. I tried to reboot this way several times as you suggested, but it would not reboot. Finally I decided to try and reboot using the Alpha format and the Tinynoot. I have used the clockworkmod sdcard with these two and yes, it does get to the clockworkmod screen and actually installs the zip files, but when I remove the battery and click the bottom front button to reboot, the screen flashes once and does not reboot. The screen now displays the description of the last step by step installation process I tried with Tinynoot. Any suggestions on how to get the NSTG to reboot?
ladykayaker said:
When you have the rooted Forever screen it takes quite a bit of effort to get the nook to restart.
Press and hold the power button numerous times. Hold the power button for at least three full seconds, even longer.
Click to expand...
Click to collapse
I hope it's okay to send you the message I sent to another person that responded to me. I am just learning how to use the threads.
I have the US NSTG. At first I had the ROOTED FOREVER screen and tried rebooting exactly as you suggested, but it did not work. I tried to reboot this way several times as you suggested, but it would not reboot. Finally I decided to try and reboot using the Alpha format and the Tinynoot. I have used the clockworkmod sdcard with these two and yes, it does get to the clockworkmod screen and actually installs the zip files, but when I remove the battery and click the bottom front button to reboot, the screen flashes once and does not reboot. The screen now displays the description of the last step by step installation process I tried with Tinynoot. Any suggestions on how to get the NSTG to reboot?
briv said:
but when I remove the battery and click the bottom front button to reboot
Click to expand...
Click to collapse
Please do not remove the battery.
Do remove the sdcard.
The bottom front button is not the power button. Do not use this to reboot.
The power button is at the rear of the nook, at the very top. Press and hold numerous times.
I would recommend using Glownooter for rooting your US Nook glow. http://blog.the-ebook-reader.com/20...using-glownooter-includes-googles-app-market/
If you are using the Alpha Format Touch that I am thinking of, then this is for the UK, not US, Nook.
Tinynoot is not great for a first timer, it has minimal apps which you will find hard to use initially.
Glownooter is much better for rooting the first time.
I would suggest you use these instructions to first restore your nook
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
with all the rooting and re-rooting you have done I can't be sure what state your nook is in now.
Start up your nook, be sure you are back to the original.
Then try again using Glownooter.
---------- Post added at 05:18 PM ---------- Previous post was at 04:22 PM ----------
briv said:
I have the US NSTG.
Click to expand...
Click to collapse
I just want to check one other thing - what software version is installed on your nook.
Glownooter is only for firmware 1.1.5
Use Tinynoot for firmware 1.2
Alpha Format Touch works for UK Nook firmware 1.2, but does not have satisfactory results for US Nook on 1.2
Summary:
I bricked my sister's Nook Color. She bought it refurbished at a pawn shop for cheap and everything was working until I told my sister that I could root the nook and put an android rom on it. My biggest mistake ever.
I looked at a lot of forums relating to the problem and it seems like there isn't a fix. So basically I got to the point of having CWM working.
All was going so well and I decided to flash eyeballer's cm-9-encore-20120904-0700-unofficial.zip on it. The one on Goo.im. After looking at screenshots of CM9 I was impressed.
I did the factory reset on it and wipe the cache, I flashed the CM9 and it was installing and it seem that it was taking a long time and then the nook turned off.
The biggest mistake that I made was that I formatted the boot , I'm a noob, I figured I wasn't the only one so I came across a thread here http://forum.xda-developers.com/showthread.php?t=949699
I thought that CM9 got installed and when I went to turn it on, nothing whatsoever... It doesn't boot no more.
I tried putting the 1gb bootable CWM on a 1gb sd card with Win32 Disk Imager and the Nook didn't boot from the SD card either and I also did the same with an 8gb.
When I go connect the Nook on the computer it searches for a driver called Omap3630 but it doesn't install and it seems to disconnect itself.
I am was looking for more threads and found out that I'm in a similar situation as a user called Jiv_au here,
http://forum.xda-developers.com/showthread.php?t=1146065
3rd post. I also tried what he did with the 8 boot attempts, pressing power button for 60 seconds and pressing the power on, the N and the volumes.
Seakuza said:
Summary:
I bricked my sister's Nook Color. She bought it refurbished at a pawn shop for cheap and everything was working until I told my sister that I could root the nook and put an android rom on it. My biggest mistake ever.
I looked at a lot of forums relating to the problem and it seems like there isn't a fix. So basically I got to the point of having CWM working.
All was going so well and I decided to flash eyeballer's cm-9-encore-20120904-0700-unofficial.zip on it. The one on Goo.im. After looking at screenshots of CM9 I was impressed.
I did the factory reset on it and wipe the cache, I flashed the CM9 and it was installing and it seem that it was taking a long time and then the nook turned off.
The biggest mistake that I made was that I formatted the boot , I'm a noob, I figured I wasn't the only one so I came across a thread here http://forum.xda-developers.com/showthread.php?t=949699
I thought that CM9 got installed and when I went to turn it on, nothing whatsoever... It doesn't boot no more.
I tried putting the 1gb bootable CWM on a 1gb sd card with Win32 Disk Imager and the Nook didn't boot from the SD card either and I also did the same with an 8gb.
When I go connect the Nook on the computer it searches for a driver called Omap3630 but it doesn't install and it seems to disconnect itself.
I am was looking for more threads and found out that I'm in a similar situation as a user called Jiv_au here,
http://forum.xda-developers.com/showthread.php?t=1146065
3rd post. I also tried what he did with the 8 boot attempts, pressing power button for 60 seconds and pressing the power on, the N and the volumes.
Click to expand...
Click to collapse
The problem is that you formatted boot, and CM does not include all of the needed boot files if you formatted boot. You will need to flash the stock firmware back onto the device, and then you can proceed to flash whatever ROM you want on the device, LINK.
I am not sure what version bootable CWM you are using, but download and flash this one,LINK. Since you saw the Omap3630 driver prompt, it does mean that it still is alive and attempting to go through the booting process. As for getting it to boot from this card, you will not get any visual indication that the device is on or not, the screen will stay dark if it’s on or off. Since the device might have been on this whole time I recommend that you fully charge the device before proceeding forward. With no USB cable connected to the device, press and hold the power button for 30 seconds, then insert the SD card, then press and hold the power button for 5 seconds to turn it on. It should boot into the CWM recovery, if it does not press the power button for 30 seconds and try again. It might take a couple attempts, but you should be able to get it. Once you get the device to boot, wipe data/cache, and flash the stock image, and reboot the device. Once you have a working device, you can then boot into the CWM card, and flash the ROM that you want.
GMPOWER said:
The problem is that you formatted boot, and CM does not include all of the needed boot files if you formatted boot. You will need to flash the stock firmware back onto the device, and then you can proceed to flash whatever ROM you want on the device, LINK.
I am not sure what version bootable CWM you are using, but download and flash this one,LINK. Since you saw the Omap3630 driver prompt, it does mean that it still is alive and attempting to go through the booting process. As for getting it to boot from this card, you will not get any visual indication that the device is on or not, the screen will stay dark if it’s on or off. Since the device might have been on this whole time I recommend that you fully charge the device before proceeding forward. With no USB cable connected to the device, press and hold the power button for 30 seconds, then insert the SD card, then press and hold the power button for 5 seconds to turn it on. It should boot into the CWM recovery, if it does not press the power button for 30 seconds and try again. It might take a couple attempts, but you should be able to get it. Once you get the device to boot, wipe data/cache, and flash the stock image, and reboot the device. Once you have a working device, you can then boot into the CWM card, and flash the ROM that you want.
Click to expand...
Click to collapse
You gave me a bit of hope but its not booting. The nook is dead... thanks for the help.
edit: I heard that pressing Power + N is like forcing a shut down so I hold those for 30 seconds and then put the SD card in it No boot.
I tried it again and put the Sd card in it and then press the power button still nothing. I believe this is definitely dead. I wish she had bought it at the B&N store. I think I'm getting her a Nook tablet. I owe it to her.