I have a really big problem!
Yesterday i gave my phone to a friend
After that i ask if he can install a rom that stay in my sd card, while he was formating the data cache and system, the phone restart and now the phone is sony ericsson screen but i cant turn on the cellphone because my friend formated 3 folders, cache, data, and SYSTEM! so i dont have anything to turn on the cellphone!, how can i fix this please is a big problem because i use the cellphone every day, every moment!, please help me!
It is urgently please help me
First, unplugg the phone from PC
Start Sony PC Companion, click on Support Zone
Now click on Start, from the section Phone Software Update
It will say that could find your phone, but it gives a link in blue "Repair phone", click on it
Follow the steps to instal Original Sony ROM/Kernel.
Remeber that you have to turn off your phone and start in flash mode (plugg de USB cable while you press back button)
It's happened to me this fact.
I used the Sony Ericsson Update Service. So you can relive your phone even with it off. This application can be downloaded on the site of the SE.
And your phone back to original factory settings.
thanks guys i fixed the problem ! i am so happy now really thx
So good....
=D
that rom did you instal?
Related
i have lg gt540 and while updating to 2.1 with kdz tool the pc crashed now i cant turn on the phone...i hope some one help me with that
Have you tried updating again?
the problem the the phone dont open when i press power button there is nothing
what about when plugged into pc?
first thx for replying but there is nothing when i connect it to pc i think it needs abootloader.i hope u answer me
im afraid im pretty new to android ( gt540 is my first smartphone ) but anytime i updated, everything went ok, in fact yours is the first time i heard of a crash while updating so i cant give you much info but your in the right place, im sure the devs can figure something for you. just try remove the battery and then plug into your pc. and its not a problem replying just wish i could help.
well, did you try with the battery removed?
yes i did nd there is nothing
plz any one help in that
plz some one tell me how to make abootloader to it i have another lg gt540 i want to know if i can use it to repair the bootloader for this dead phone
The problem is theres noway u can acces inside the phone memory to patch bootloader. Go to lg waranty and tell them this happened when u were updating phone, dont tell them that pc crashed, tell them u updatet through lgsupport tool too, not through kdz updater they should fix it for u.
Sent from my GT540
thx for replying i will call them tomoorow i hope they will fix it for me... i want to ask if some one has passed with the same problem b4
Goto Emergency Mode, and upgrade from KDZ program. In KDZ program, you must setting Phone Mode to CS_Emergency. And flash agan.
i sent them email about the problem and this was the reply
Thank you for your email regarding this issue.
Unfortunately due to the nature of this issue, you will no longer be able to finish the update service. In this case you would be required to return to ourselves for servicing. To action this please contact the number below with your reciept and handset to hand.
If you have any further queries, please do not hesitate to contact us again.
Best regards,
LG Electronics UK Helpdesk
can any one tell me what should i do
Remove battery press volume - or + I can't remember try two options, then plug in usb.
You should see blue screen with DOWNLOAD or EMERGENCY MODE text.
i tried all keys combination nothing work
my mobile internet went dead after flashing quarx rom (I did it wrong btw...), but everything else worked fine.
I couldn't get mobile internet back on track no matter what (it was disabled in quick settings when I flashed quarx), I even tried factory reset and flashing the baltic rom. during the flashing, the kdz updater gave me an error close to the end, and my phone became stuck at the android screen.
even though I have CWR installed, so I could flash it again, I sent it to LG claiming I was updating through their website and since my phone doesn't start. I didn't tell them anything about the mobile internet not working. Hopefully they'll clean the phone completely and that will fix it.
I'll be picking up my phone after work today, I'll let you know how it went.
Same thing Happened to me n almost **** my pants for killing my brand new phone..
follow these steps
1. volume +or-(i dont remember) +camera n power on. it should turn on n say downloading mode.
2. update( you can use kdz updater, it probably wont crash this time but even if gets stuck just w8 for it)
3. after updating, remove the usb cable n turn on the phone, hopefully it would work
4. ENJOY ( N THINK TWICE BEFORE EFFING WITH THE PHONE, )
i am not sure about the keys for emergency/downloading mode(i think it was vol-) GOOGLE IT IF KEYS DONT WORK.
Put to microwave on 2 sec without battery and send do service
my service provider fixed my phone in 3 days without any issues, they flashed the t-mobile branded 2.1 on it. went home and now I have the open europe with fastboot and cwr.
so if all else fails, just send it to LG or your provider.
cheers!
hello everyone, i am a newbie. I root my X8 successfully.i want to change the theme. so, i replace the framework apk file in the system.After that, it becomes a brick. When i turn on the phone, it stops at the frame of ''Sony ericsson''. But i can go into xRecovery. What should i do? i want to use my X8 asap...
maybe u can reflash it via SEUS
ya...i have tried SEUS,i need to turn on to usb mode to connact the pc companion. But i can't turn on my phone. It is stop at the frame of ''Sony Ericsson'' text. I need to take off the battery to turn off the phone.(sorry my english is poor )... i think i should take my phone to the SE shop to repair...
If you can get to xRecovery, can you flash one of the Roms in the Development section. Things may not work, but at least you won't be bricked.
You could probably connect it to SEUS after
at first, try "fix permissions" in xRecovery
if it won't help, just restore firmware via SEUS
You didn't bricked it man... Brick is when you cannot use any home-tools like xRecovery, SEUS, whatever...
Now if you have backup just restore it, if you not have - flash it with X10 flasher. Or use the guide to install the newest update.
-X8 z Tapatalk-
van001 said:
ya...i have tried SEUS,i need to turn on to usb mode to connact the pc companion. But i can't turn on my phone. It is stop at the frame of ''Sony Ericsson'' text. I need to take off the battery to turn off the phone.(sorry my english is poor )... i think i should take my phone to the SE shop to repair...
Click to expand...
Click to collapse
SEUS is different in pc companion because u don't have to turn on your phone when using update service all u need is to put ur phone to flash mode
kimpoy1994 said:
SEUS is different in pc companion because u don't have to turn on your phone when using update service all u need is to put ur phone to flash mode
Click to expand...
Click to collapse
agree....still have hope....keep trying man.....
i solved the problem with SEUS,Thank You^_^
How are you trying to apply the theme? There is a trick to it.
I had a rooted , xRecovery, app2sd2.1 mod dalvik cache, . . .
rebooted and bricked
no recovery, no nothing past black screen ' Sony Ericsson' screen.
downloading Update service from SE, but FA will get me past this screen so-far
( removed sd=no joy)(usb to PCCompan=not found(as I cannot mount))(cannot find fail-safe key-presses to factory boot???)
?
Try to flash with a custom rom and then use SEUS.. It might work
Sent from my E15i using XDA App
Seus 2.11.1.9
I'm trying with the Downloaded standalone version, but have a problem.
after I select the X8, it tells me to hold back button, and plug in USB,
now windows finds a 'semc flash' device, but hangs there.
Something is severing the internet connection ( USB internet dongle )
at this point the PC is locked .
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
use SEUS or pc companion to repair
I've tried using the PC companion and I returned that has no update to be done.
I used adb logcat and found that the boot goes in a loop whenever he gets in this command:
D/AudioHardwareMSM72XX( 4911): setVoiceVolume(1.000000)
With that you know what I should do?
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
use SEUS, it will repair ur phone in off state..
haomaster said:
Man, I've downloaded this file, says that when I install the software already installed is the latest.
When I turn on the phone, no button works to turn off it, only removing the battery.
Click to expand...
Click to collapse
anyway you can reinstall firmware.
1. Take phone battery off.
2. Connect USB to computer, than to phone.
3. Press and HOLD back button
4. Insert the battery
5. Let go the back button (release)
kiz1983 said:
use SEUS, it will repair ur phone in off state..
Click to expand...
Click to collapse
Man :| its seus:
k3ksik said:
http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en
Click to expand...
Click to collapse
Thank you to everyone who helped me! I managed to circumvent the problem by using FlashTool 0.2.6 firmware with generic.
Thanks!
haomaster said:
Hello friends,
I'm new to android, and tried to install app2sd, but the attempt was not recognized sdcard.
After that I was somehow trying to fix it using FlashTool (http://forum.xda-developers.com/showthread.php?t=920746), but after I used the "Optimize" the program and then restarted the phone is still only in the text "Sony Ericsson".
I've tried reset, hard reset, remove battery, but nothing worked until now.
Has anyone experienced this? Or know how to solve? Therefore only used the phone for 2 days and managed to catch it!
PS: Sorry if anything in the text does not make sense because I used the google translator to communicate.
Thanks!
Click to expand...
Click to collapse
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
ShinobiPT said:
Hello,
i have the same problem, after click in the option "Optimize", the mobile was restarted.
the only thing that appears is the SE Logo.
Can anyone help me, please?
Thanks
Click to expand...
Click to collapse
See above, or see this post of this topic.
(Instructions how to repair the problem with PC Companion)
Thank you....
I will test again, root the SE and install a Room.
Thanks.....
I had that problem, stuck on SE logo, i waited a few minutes, and then the phone started.
problem big problem
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
zakulaa said:
please help
my pc does not recognize x8 I tried to update but the PCC is to update a half turn and stopped off.when it just turn on Vibrate.
just dead.
Click to expand...
Click to collapse
Charge your phone (not plugged into usb on computer) for at least 4 hrs.. Then try again..
thanks:good:
---------- Post added at 01:24 PM ---------- Previous post was at 12:43 PM ----------
how to enable debugging mode when my phone wont turn on.
hye guys,
im totally new here and i tried rooting my x10
with the xda-dev section
but things turned out to be ugly as i cant see any display after step1 completed,
pls im very nervous and thinking i might have broken it down ,
any help wud be really appreciated.
thnx.
the version i had was 2.1
If your phone wont turn on or you got no display try reflashing with seus for now. That should fix you up for now.
After that i can help you out with flash tool.
Sent from my X10a using XDA App
brother,
it will be awkward to ask too much but i really dont get u.
im fresher here,
so wud u go easy on me,/?pls
Ok, first if you havent already, and I can almost guess you haven't you need to download PC Companion and Sony Ericsson Update Service (SEUS) to your computer.
Once you do that, turn your phone off, and run SEUS. Follow the steps and select your phone when given the option. After you select your phone, it will tell you to plug your phone into your computer in flash mode, basically just hold the "back" button on your phone until SEUS tells you to release it. If you have a new upgrade available then feel free to do so,..if you already have the latest software then in the bottom right corner you will see an option that says "install" click on it and proceed. It will reflash your phone for you and should be ready to go once done.
Good luck
i did just as you said , but i there is no "install" option at the last step
pls help
Guys, my wife's X8 just got busted..
touchscreen is gone.. display is still there but not responding to touch anymore.
(I did everything I can.. so confirmed it's a hardware issue).
I've flashed this to a custom ROM.
How can I flash this back to stock 1.6? Along with the SE GUI?
I ran search on forum and found I need to download SE PC Companion, or SEUS.. will that do the trick? I need confirmation because my internet connection at home is quite slow, and I need to send this back for warranty ASAP.
Thanks all.
Yeah, download SEUS, select repair and it will install stock 2.1
Sent from my X8 using XDA App
Thanks Godra..
However I found this from SE Website..
How to use
1. On the computer: Start PC Companion.
2. Connect the USB cable to your computer and then to the phone..
3. On the phone: Select the "Connect your phone" option.
4. Wait for the phone to connect.
5. On the computer: From the Dashboard, select the applications to start different services and get information.
----
Issue is the touchscreen is busted, so I can't select the "Connect your phone" option.
Any other flashing method to get back to stock without them noticing that I've modded?
use the Flashtool.
You´ll have the choice beetween different 1.6 and 2.1 ROMs, and you just need to putn your phone into flashmode for this, so you don´t have to touch the screen.
You can try x10 flashtool. I would post you a link to the thread but im currently on my x8 so you ll have to use search...
Sent from my X8 using XDA App
Thanks codfreak and Godra.. I'll try first and see how it goes.
Appreciate your help. God bless!
Dear all, I found out that I've made a nandroid backup of the original stock ROM and saved it on my computer hard disk (see.. always do a nandroid backup!)
Anyway, I have xRecovery installed on the phone.. how do I uninstall it?
Flash with SEUS. You need first to turn OFF your phone (better to pull out battery). Run SEUS, choose your phone, next.
When SEUS asks, put your battery in while pressing back button. It will restore original Eclair.
unfortunately after using Sony Ericsson PC Companion 2.0, the app is unable to detect my phone.
Upon connect via USB, it asked me to do something to the phone.. which require touchscreen interaction before it could identify..
neato4u said:
unfortunately after using Sony Ericsson PC Companion 2.0, the app is unable to detect my phone.
Upon connect via USB, it asked me to do something to the phone.. which require touchscreen interaction before it could identify..
Click to expand...
Click to collapse
You are not trying SEUS?
I think there is no need to touch anything on phone because SEUS is needed your phone to turn off.
wc_how, yeah I didn't use SEUS.. hehe..
Oh well, I sent the phone after nandroid restore.. stock ROM.. as it is..
At the service center, one lady tested my phone.. checked the hardwares.. all appears ok, no sign of drop.. while I explained about the touchscreen issue..
All of a sudden she enters xRecovery before I knew it.. and she was greeted by this smirking Android face...
She paused, take a look at me... I smiled...
She turned the phone off and said "Ok, we're going to replace the touchscreen for you, please sign here - here's your reference number, we will call you - or you can call us when the device is ready"
And I was off.. hehehe
Your lucky then, enjoy