i used the xmod yuki ROM i am currently on nodo but want to update officially from NODO to mango i keep getting update is the latest one.
Me Too. I Stopped at 7392 NODO. I Try Looking For 7720 On Zune ButI Could Never Find It. I Need Help Too.
From the main ROM link download the DeviceProvisioning.cab and install it using the WP7 Update Cab Sender. Then connect your HD2 to the Zune and it should tell you to update to 7720 (that's exactly what I'm in the middle of now )
Good Luck
Thanks Salonluden. I Figure I Needed DeviceProvisioning I Updated It Over 5 Hours Ago.
I downloaded and DeviceProvisioning.cab and WP7 Update Cab Sender and putted DeviceProvisioning.cab in the WP7 Update Cab Sender Folder.
Then I run WP7 Update Cab Sender.bat and choose 'S'. But then it says 'Error: No update files'
What am I doing wrong?
(ps: here is a pic of it: http://i55.tinypic.com/2i8ki9k.jpg)
jellenl said:
I downloaded and DeviceProvisioning.cab and WP7 Update Cab Sender and putted DeviceProvisioning.cab in the WP7 Update Cab Sender Folder.
Then I run WP7 Update Cab Sender.bat and choose 'S'. But then it says 'Error: No update files'
What am I doing wrong?
(ps: here is a pic of it: http://i55.tinypic.com/2i8ki9k.jpg)
Click to expand...
Click to collapse
Maybe you already send this cab to the phone.
But if it is right that I already send this cab to my phone, my phone should update to 7403 right? When I connect my phone with zune it says something like: "Your device is up to date (7392)"
jellenl said:
But if it is right that I already send this cab to my phone, my phone should update to 7403 right? When I connect my phone with zune it says something like: "Your device is up to date (7392)"
Click to expand...
Click to collapse
Yes. You right...
Is this happening only with this cab?
You try the method to force mango update?
Hmm I downloaded the 'Hardware Key mapping Cab' to change the keymapping and I get the same result as above (no update files).
Try dragging the cab file to the "Update Cab Sender.bat" file, which will in turn run, then hit "S".
Don't Run The Cab Sender As Administrator.
Hmm when don't run it as administrator but as normal, I get this error (and the same when I drag 'deviceprovisioning.cab' in 'WP7 Update Cab Sender'.
(Sorry it's in Dutch)
This is what I get without typing or clicking on something, just opening 'WP7 Update Cab Sender'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
btw, this is how my folder for this looks like.
edit: I reflashed WP7 because I thought that that may help but after reflashing and updating through zune to 7392, I still have the same problems as above.
Hi all, I've been wondering why when I install the Back to the Future [XBmod-Yuki] [7720 ready] rom, I cannot connect to Zune (latest updated)? All it just says is "no device connected"...what could I possibly be doing wrong??? Thanks...
Related
Hi, I own a dutch HP iPaq 614c Business Navigator and I tried to update my device with the HP SP40079 Rom update file.
I used the cracked .dll to bypass the language check and the update succeeded.
(I did disable antivirus and firewall because it gave me problems with the wan radio update)
When I booted up my device again, the boot screen tells the firmware has been updated(0.88), but the OS remains the same as before the update(1.00.04).
If I start the update utility again, it shows the Wan Radio driver has been updated, but the Bootloader and the iPaq file storage haven't.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried updating it again, and again, but still nothing changed.
Anyone who knows a solution for this?
P.S. I use Windows 7 RTM x64
Problem in your OS. Try Windows XP
Thanks, that worked
Now i'm on OS 1.01.04 and FW 0.88(I'll update to 0.89 later)
hi, i'm noob here so i need your help..
I just got iPaq 614c, the language is in stupid sweden...
problem is that i can't change language to english...
I tried to update my mobile with micro SD card and flash.dio, but i got error: "update Error! Pls Check!"
os- 1.00.05
fw- 0.81
please help and sorry for my english
nobody
when you say "update" what are you updating? the FW? ROM?
If your trying to update the ROM, first run the official HP updates to update the the FW to 1.04 and 0.89 (using activsync)
then try the ROM files via sd card.
sebastiaan4489 said:
Hi, I own a dutch HP iPaq 614c Business Navigator and I tried to update my device with the HP SP40079 Rom update file.
I used the cracked .dll to bypass the language check and the update succeeded.
(I did disable antivirus and firewall because it gave me problems with the wan radio update)
When I booted up my device again, the boot screen tells the firmware has been updated(0.88), but the OS remains the same as before the update(1.00.04).
If I start the update utility again, it shows the Wan Radio driver has been updated, but the Bootloader and the iPaq file storage haven't.
I tried updating it again, and again, but still nothing changed.
Anyone who knows a solution for this?
P.S. I use Windows 7 RTM x64
Click to expand...
Click to collapse
Hi,where can I download the Ipaq Utility Update for 614c,I will be very much thankfull if u could provide me with information..thanks..
I am trying to install the registry editor PHM Reg Edit. I've copied the MSI file I downloaded to the memory card but when I click it I get this message - There is no application associated with PHMRegEdit.
Any ideas? Do I need to install an unzip program?
Run the MSI from your pc with the phone connected - it will install it on your device. You can only install files on your handset via .cab files.
ftr2k8 said:
Run the MSI from your pc with the phone connected - it will install it on your device. You can only install files on your handset via .cab files.
Click to expand...
Click to collapse
I did try that first and it installed on my PC but not the phone? I can't find it anywhere!
I'm connected via active sync, I'm assuming that's right?
Pezza4u said:
I did try that first and it installed on my PC but not the phone? I can't find it anywhere!
I'm connected via active sync, I'm assuming that's right?
Click to expand...
Click to collapse
Well, then you should be prompted with the choice of installing the software...Anyway, if you run the msi on your PC, you now have somewhere on your hard disk, the cab for regedit, you can copy it to your SD and install it from there directly on the HD2
you could also download the cab instead of the msi
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
pat12 said:
Well, then you should be prompted with the choice of installing the software...Anyway, if you run the msi on your PC, you now have somewhere on your hard disk, the cab for regedit, you can copy it to your SD and install it from there directly on the HD2
Click to expand...
Click to collapse
Yes I'm prompted but doesn't give the option to choose the phone. After installing it on the PC I tried running setup and I get a box popup asking me to add/remove programs on the phone?
Screenshot below are the files that it's installed on the PC, nothing is on the phone?!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could really do with some help please
I've tried installing it on the PC and on the phone and it doesn't seem to be working?!?!
pat12 said:
you could also download the cab instead of the msi
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
Click to expand...
Click to collapse
Sorry I missed this post, had the thread open when I posted the one after. I've downloaded and installed that ok...thanks
Not Froyo but first a other update for Wildfire : systemupdate 1.37.405.1.
Tomorrow Froyo for Legend ! : http://www.facebook.com/htcde/posts/123526287710679 (German HTC Facebook)
After that 2.2 comes to Wildfire or maybe also tomorrow ?
From : Dutch website
This is what it says on the website :
HTC Wildfire update
Also the HTC Wildfire gets a update OTA. But it's not Foryo or a hedge to get to Froyo. It's system update 1.37.405.1 and it's 17 MB.
When whe know about the advantages of this update whe let you know.
Click to expand...
Click to collapse
When FroYo comes official, will some other things that not the Wildpuzzle have bee there?
Downloaded this update but when it restart the phone and start installing there was error messages:
Failed to verify whole file signature
Signature verification failed
Installation aborted
Any ideas?The phone is rooted,can it be the reason?
It says Froyo for Legend, i'm not sure though because that's what i read from Google Translate. Either way, i'm all pumped up. Hopefully, a Froyo for Wildfire tomorrow *fingers-crossed
Georgi121270 said:
Downloaded this update but when it restart the phone and start installing there was error messages:
Failed to verify whole file signature
Signature verification failed
Installation aborted
Any ideas?The phone is rooted,can it be the reason?
Click to expand...
Click to collapse
same for me, my wildfire is also rooted...
update iso is on sd card, so go to nandroid (boot) and choose zip from sd, then it will update normal
sorry for pure english
Enter in recovery mode, disable signature check under Install zip from sdcard, by pressing toggle signature verification. Next choose zip from sdcard, go to your downloads folder and select OTA_blabla.zip.
I'm no expert but won't downloading OTA updates remove root?
Might be they are settings things up.
P.S. FU HTC, I waited for your OTA very long, and then I rooted. Wish this was 2-4 months earlier. But you have your wealthier customers to focus on, we understand!
Thanks to lazaj007 for general info and to ricardoft for detailed guide,my wildfire finaly congratulated me for updating it .
I have root phone too, i just went to recovery and flash the file from sd card, and reboot it works...sorry for english
I've downloaded update 1.37.405.1. But i can't find any difference. Has somebody found some difference?
Greetz
samfc3 said:
I've downloaded update 1.37.405.1. But i can't find any difference. Has somebody found some difference?
Greetz
Click to expand...
Click to collapse
Hey, i've noticed that the market has been updated :/, that's all I notice
Now let's wait on FroYo...
What I found new in this update is that it connects more faster to a wifi hotspot and that the market app has now tabs with ABOUT COMMENTS RELATED
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
samfc3 said:
Now let's wait on FroYo...
Click to expand...
Click to collapse
Haha yes, hopefully after The HTC Legend has been updated
Legend will get froyo tomorrow, i hope after that wildfire will get it soon.
i did everything but still cant update.i mean recovery,signature disabled,choose zip from sd and still error.any ideas?it says status 7 installation aborted
stelioz78 said:
i did everything but still cant update.i mean recovery,signature disabled,choose zip from sd and still error.any ideas?it says status 7 installation aborted
Click to expand...
Click to collapse
I Have the same Problem!
I really tried it that way! but nothing than just:
(Status 7)
Installation aborted.
The only thing I've done with my Wildfire was to root it & to apply another kernel to overclock it.
PLEASE help me! =)
yes i am using the overcocking kernel too.maybe if we flash again the original kernel?
Hi all,
I have a problem with updating my phone via the update cab sender.
My HD2 is on WP7 7392 now, so I need the wp7 update cab sender and the deviceprovicioning cab. Like this, right?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then if I run the update cab sender.bat as administrator, and choose 'S', I get this error:
And if I don't run it as administrator but as normal, I get this error (and the same when I drag 'deviceprovisioning.cab' in 'WP7 Update Cab Sender'.
(Sorry it's in Dutch)
It's without typing or clicking on something, just opening 'WP7 Update Cab Sender'.
I also reflashed WP7 because I thought that that may help but after reflashing and updating through zune to 7392, I still have the same problems.
So can please someone help me or give me a tip or something. I need the mango update because in the Nehterlands WP7 is only supported since mango, so I can't use the marketplace with NoDo.
Thanks in advance.
i'm also having same problem...
please some one help us to solve this problem.....
and thanks to "jellenl" for creating this thread with details.
I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.
I don't know why the folder "If needed install this tool" is there. Get rid of it.
whistler-nl said:
I assume you are running windows 7 on your desktop pc. Dont start it as Administrator as it will cause what you allready had. Just extract the tool to your desktop and add the .cab file you want to deploy in the same directory. Make sure you are not extracting the .pks files! They may look like zip files but they are not.
Click to expand...
Click to collapse
i try to do as your instruction....
and im little bit successful but than i got this error: (see the attach)
and another attach after rebooting both device PC and phone:
Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.
jellenl said:
Sorry for not letting you know but I already 'solved' this problem. I tried it on 3 different computers, and I got the same error as above on the first two, and on the 3th, everything worked. So touseef maybe you can try it on another pc.
Click to expand...
Click to collapse
@jellenl
I to am experiencing a similar problem as listed in my post [Q] Update Error C00D070A There's a communication error with your phone.
I have received the same error on two machines, both W7P SP1 (64bit&32bit), can you tell me what operating systems and their basic configurations were? I can make a third attempt if needed.
Thanks -Airstream
for sending CAB to phone you can also use this app:
http://forum.xda-developers.com/showthread.php?t=1315179
your phone should have the date and time as the computer has.and also,have you installed your x64 or x86 tool?
let us know if it helped at all.
also,screen always on,and zune not working
Thanks for the posts.
@dxdy
How would I use this utility to upload standard cabs (my phone has a standard rom and I have no interest in changing that), do I have to update the cabdata.xml file?
@florin_stann
My date and time is sync'd with the computer, x64 tool is insalled on 64bit machine, x86 tool installed on 32bit machine. Screen is set for 15 minutes and Zune process is terminated.
Thanks -Airstream
Problem Solved!
Taken from my thread at http://forum.xda-developers.com/showthread.php?p=22853654#post22853654
After manually backing up my data (there are automated tools you can use) I factory reset my phone and attempted an update to 7740 using the following tool http://forum.xda-developers.com/showthread.php?t=1315179 with a custom CabData.xml that I created for my phone (VZW Trophy). I updated my OS (7720) and Languages (English - United States (0409) and Spanish (0C0A), the two languages installed by the default) to 7740 successfully, and then updated OS and Languages to 8107 succesfully. After the update process I reseated my battery and factory reset the phone once again, and as expected the latest OS 7.10.8107.79 (8107) is still present on my phone.
It's important to note that I have a factory ROM and my phone already had it's firmware updated automatically (via Zune) to the levels noted in my original post. I believe the WP7 Update Cab Sender would have worked as well but preferred the slick interface wCabSender provided, thanks guys!
No thanks Verizon and HTC, a BIG Thanks to all at xda-developers!
I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru
chakru said:
I bought Samsung Omnia 7 which was developer unlocked about 6 months back, it came with Windows phone mango installed when I got it, recently I get a message when I connect it to Zune that there is a minor firmware update available for the device, I haven't installed the update because of the fear of losing my unlock on the phone.
I just want to know considering the fact that my device is developer unlocked, after the installation of new update on the device, will my unlock remain intact or I will be forced to unlock the device again?
I do not see much or any bugs on the device and I see no point in updating the firmware as well, but just want to know what would happen if I did, as I have zero knowledge on the whole thing.
Thanks
Chakru
Click to expand...
Click to collapse
hi, if your device is unlocked, after update will remain intact. Zune make normally a backup before install a backup (but not shure if by each update). to be save do a backup:BACKUP now your unlocked MANGO phone - to RESTORE over ZUNE tnx xboxmod
Unzip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WP7 Update Cab Sender.zip on your computer. Its a update/backuptool. it contain a dummy cab- it will backup your phone- but nothing update. Run the WP7 Update Cab Sender.bat (without ZUNE run). If you get a error, please install the tool from folder "if needed install this tool".
After run the WP7 Update Cab Sender.bat type B for (fake) update and real backup. If you have already a backup in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update- please cut and paste it in a save place.
After all you will get a error message.
Is o.k. ignore the error message. Your BACKUP are succesful done. the error causes from the "fake update", the update cab is only a dummy and is neeaded to activate the Backup procces.
INFO: to see this path/files, you have to activate under windows explorer folder options "visible hidden files" The Backup files you will find in C:\Users\UserName\AppData\Local\Microsoft\Windows Phone Update, such as this folder name d4e21648 - xxxxxx - xxxxxx - xxxxxxx.
When you then connect your phone and start ZUNE, and search to updates, ZUNE tell you "your phone software is actuall and you get the RESTOREPOINT. Copy/Cut the Backup folder from ....\Windows Phone Update to a save place
INFO: If you RESTORE it over ZUNE plase be patient, the first 10 minutes you do not see an progress- but wait it will! f the screen go off, turn on and lock off the screen AND wait!Restorations duration is ca. 40 min. please do nothing with the phone in this time. be patient. After Restorations connect again with ZUNE, then you get Samsung App Store alo back
DISCLAIMER
I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
original thread http://forum.xda-developers.com/showthread.php?t=1335452
WP7 Update Cab Sender.zip - (3.67 MB, 6743 views)