Small run down of what i did and if anyone can help ....
I was running 2.3.3 and updated to the unofficial 2.3.4 using odin and simply honey 5.0 revenge by sgt. That's when i noticed that the phone does not connect to the bell network.The rest of my phone works perfectly even the wifi...but like i said i can t seem to connect to the net work anymore.....
firmware 2.3.4 / baseband version i9000xxjvr/ kernel version 2.6.35.7 [email protected]/ build number simply honey 5.0 revenge
i ve tried some stuff that i have read in these forums like
1. Put apn info my self....tried that nothing.
2. Called tech support and they told me to take the battery out and then the sim
put it back , nothing again
My question is do i have to go back to stock rom to get the network back or is there something else i can try....
information on this subject is sketchy, when i do a google search ...any help would be appreciated...thanks in advance
It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.
strtkempo said:
It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.
Click to expand...
Click to collapse
Couple of questions for you guys out there.......
First my info I am running firmware version 2.3.4 / basband i9000xxjvr/kernel 2.6.35.7 and build number simpley honey 5.0 revenge ...ntw ..my csc i9000 oxajvq
1. Can i go straight to stock using odin from this configuration with out bricking my phone?
2. Can i just flash the csc for bell because someone in the forums told me that is not the right csc for canada, quebec.
please advise....thanks in advance....
Related
Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie
if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab
and will I have to re root the device and also will ODIN delete all my data?
Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)
Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES
To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!
thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...
boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App
is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?
Hi Guys,
Ive searched the forum, to no avail...
I would like to flash my Apollo with FroYo, but for safety's sake im trying to find a copy of my original firmware so I can flash it back and use KIES if needed.
If I type in *#1234# I get:
PDA I5800XXJG7
Phone I5800XXJG3
CSC I5800XXJG5
Does any kind person have the relevant files handy for upload please?
Also, If I flash a new firmware should they all match the original (ie the I5800XX part).
Thanks for your help
I posted the same question a week ago. I didn't get a straight answer. I had the same firmware before i flashed to XXJPM. Your firmware is XXJG7, but I didn't find it on samfirmware. I found XWJG7, but I think that is not the same, because there is xxjpf and xwjpf - the first one being older. To update via kies when the official update comes u need an official firmware, XXJG7 is official since u got it with your phone, but u cant find it, can you? So you need any official firmware, but i don't know witch are official except XXJG7... Anyway don't bother with this, you can flash froyo without backup, i did it and nothing went wrong but be cautius and folow the steps closly and when the official update comes it will be avaliable to flash via odin. until then flash any non official froyo
I have this rom and am uploading it now its I5800XXJG3 - csc xxjg5 - phone xxjg5 - pda xxjg7 will post a link soon
here you go
megaupload.com/?d=OYHZW0WX
Thanks
I see the numbers are slightly different, does it matter?
I have also read that flashing the bootloader can cause hard-brick issues, is it better not to flash the bootloader?
i did not flash the bootloader just to be on the safe side, not sure what the cl447760 & cl460190 mean all i tell you is kies see's this as the latest firmware for my phone the uk .
i got the phone three weeks aga at the carphone warehouse it is unbranded and unlocked
Thanks again for your help. I have now upgraded mine to the standard XXJPM FroYo with ODIN. Just out of interest, is there a way I could have got the old firmware off my phone into files like you uploaded?
i think you can dd them to the sd card but not sure how to do it , i googled for ages to find my that firmware on some random site because i did not like froyo after i flashed it
ive gone back to 2.1 until i can find a fix for icons not staying on the home screen from apps installed on the sd card after a reboot. other than that i was pleased with it.
hello
i have now the litening 1.5
and i didn't backed up my stock rom
there is a way to back to stock rom now ?
my phone from clove.uk
(i know that it might be at www.samfirmware.com but don't know what to search....)
thanks
and sorry for the newbie question
Just flash KF2 in odin again (presuming thats the firmware you were on before litening rom) and you will be back on stock firmware with all your apps and data in tact.
do u mean this one ?
I9100XXKF2 ## EXT4.PIT 2.3.3 2011 June MULTI - CSC - OXAKF2 ?
and how can i be sure that this was my firmware ?
as i said ... my phone from clove.co.uk bought it on 9/6/2011 if it help
Hi I've byen wondering the same thing.
I flashed my phone before taking notice or backup of anything and so haven't a clue which versions my phone came with.
It is great that all the stock stuff is available but does not help me much as I have no clue whether, whatever I flash will be the same as what the phone came with...
I suppose that it is too late to think about that and not possible to find out exactly which combinations the phone came with from emei or serial no. or something like that..
by the way
if my friend bought the galaxy s II from clove 2 weeks after i did
it should be same firmware ?
(he didn't root it and flashed it yet....
then he still with the stock rom , it can help me ?
You can flash back to KE7 stock. This has been available via the official KIES Samsung channel.
Check the Development forum for stock firmware:
http://forum.xda-developers.com/showthread.php?t=1075278
waynej4 said:
You can flash back to KE7 stock. This has been available via the official KIES Samsung channel.
Check the Development forum for stock firmware:
http://forum.xda-developers.com/showthread.php?t=1075278
Click to expand...
Click to collapse
do u mean this one ?
XWKE7
Firmware info
PDA:XWKE7
PHONE: XXKE4
CSC:XEUKD1 (XEU)
Build date: 18/05/2011
Generic XEU: http://www.multiupload.com/IBRBHDUDXI
MD5: F388DB98FC83861C2F22E607AE940DBB
and how i can really know that this is what i had before i flashed the litening 1.5 ?
and what about the kernel ?
should i need to do something about it ?
At the end of the day I don't think it matters what firmware you go back to as they are all pretty much the same with no major changes. If you are in the UK then it probably came with KE7 as that is the latest official ROM for this area. Litening ROM 1.5 is based on KF2, so flashing stock KF2 won't do any damage.
Before flashing anything do a backup just in case, but if you flash any PDA in odin none of your data will be wiped.
Epic-Emodude said:
At the end of the day I don't think it matters what firmware you go back to as they are all pretty much the same with no major changes. If you are in the UK then it probably came with KE7 as that is the latest official ROM for this area. Litening ROM 1.5 is based on KF2, so flashing stock KF2 won't do any damage.
Before flashing anything do a backup just in case, but if you flash any PDA in odin none of your data will be wiped.
Click to expand...
Click to collapse
and what about the warranty ?
if i will need it samsung will be take it with KE7 ?
and what about the kernel ?
if i back to KE7 the kernel will back to KE7 too ?
Hi all,
I just traded a SGS for an Iphone4 for an SGS2. I used to have my SGS rooted and custom ROM because it was sort of necessary for that phone. I would think that it is not neccessary for the SGS2, but... I'm in China and the phone I bought has QQ Security, QQ phonebook, and 360 Security and a bunch of other junk on here as a system program. I hate Tencent. I hate everything about Tencent. I will not trust this software on my new awesome phone.
I tried to uninstall this garbage with Titanium, and it said it uninstalled, but then it was still there. So I guess I need to flash a new clean ROM. Which is not what I want to do, but so be it.
My baseband and stats are as follows:
Android 2.3.3
Baseband I9100XXKE7
Kernel Version [email protected] #2
QUESTION 1: What ROM is close to stock, has a decent set of the new Samsung programs?
QUESTION 2: I would prefer not to use ODIN, as my USB system / drivers on my home computer is messed up and my SGS and SGS2 cannot connect. Can I do a CWM flash of a ROM (used to be able to do this with most ROMs on SGS if I was upgrading to a similar ROM)? If so, which one is compatible with what I have?
Thanks.
1. If you want to stay close to Stock... then go ahead and flash a Stock Firmware..for example KI4 (2.3.4) or KI3 (2.3.5)
2. Nope you have to use Odin to flash at least a custom Kernel to get Clockwork.. only with Clockwork you can flash other Customs Roms but not stock Roms
You probably have Chinese firmware, which means you cannot flash normal firmware on there, it won't accept it, it is somehow protected.
Dial *#1234# in the dialer and post what you see there.
There is a modified build somewhere here on xda, to which I cannot find the link now. You can probably find it, since you are not the first one with Chinese firmware who wants to get rid of it
pda:i9100zske7
phone: i9100zskf4
csc: i9100zskf4
BTW it is rooted and there is a recovery mod on it now.
Tried to root my cousins sgh-i897 phone now it loops with the galaxy s screen then restarts and shows the screen again. It had 2.3.3 on it and I used this file to try to root it CF-Root-XW_XEE_JVB-v3.1-CWM3RFS.tar
Maybe it was for the wrong phone/ os ver?
Oh btw its the rogers version
Anyhoo what do I do know? I feel bad because shes been sitting here forever
EDIT: If this is the wrong file could someone please show me where to go for the right one? I can still get into downloading so I think I didnt brink the thing
Thanks guys
Pop the battery and follow the instructions:
[HOWTO] Flashing CWRecovery to i9000m & upgrade to ICS AOSP 4.x ROM from any version
Just a caveat, I saw that you are on Bell but it's a Rogers phone. Bell = i9000m. Rogers = i9000m? What baseband/modem did it have?
[Firmwares]Official I9000/I9000M Firmwares collection [Latest: XWJW6, XWJW5, XXJW4]
i9000m uses KG3 modem (first link above).
thanks for the quick response, well I was an idiot and I flashed a ver of I896UXJL1 that gives me a at&t screen but it lets me boot into clockwork mod and downloading screen... its a rogers phone, Im doing this for my cousin (never again)
Ok so I found the original rom and put it back on the phone.... If she wants ICS shes gonna have to take it to someone more experienced lol
Thank you for all your help