Related
How To Get Rid of The Black Autocomplete Box When Using Hardware Keyboard
To Hide the Autocomplete Box:
1. Type as Normal Until Words Start Appearing
2. Press Menu Button Twice
3. Autocomplete should hide itself
To Bring the Autcomplete Box Back:
1. Press the text field once
2. Should Pop Back up once you start typing
Super thanks to the1wingedangel for figuring it out!
Original Post:
But does anyone know how to get rid of the black word suggestions that pop up underneath the text entry box when your using the full keyboard on the G1? I for the life of my can not figure out what auto correct option to uncheck. The worst part is that its really unpredictable and might show up 1 out of 10 times i start typing with the keyboard.
Thanks guys : )
EDIT: ooops sorry. Over looked the word 'full'
Good question...that started showing up randomly for me a couple of days ago.
Double tapping the text box while your keyboard is open should get rid of it from showing up again.
Hmm good idea uber, will give it a shot next time the thing pops up and let you know how it works out.
That annoyed the hell out of me so much i switched roms. It would auto-replace words that I didn't want replaced.
Alright so I tried the double tap thing and no luck on that front. Didn't work out for me. Anyone else try that fix out?
And I know what you mean CBowley. It might just take a .lib deletion or something to fix tho. Heres to hoping that something comes up : )
RainCrow said:
Alright so I tried the double tap thing and no luck on that front. Didn't work out for me. Anyone else try that fix out?
And I know what you mean CBowley. It might just take a .lib deletion or something to fix tho. Heres to hoping that something comes up : )
Click to expand...
Click to collapse
Make sure you're doing it before you type anything in the box or it's locked to the ON position. I've done it a few times on my phone right here and it's working like clockwork. :-/
Ah I see so are you saying to double tap before I enter anything in the textbox ever? The problem is that it will show up completely random times like 1 in 10 or something. But I'll try double tapping before entering anything in the field and see if that keeps it at bay.
To turn off auto complete and auto correct:
Menu->settiings->Locale & Text->Touch Input (or whatever KB u r using)->Text Input
From here you can turn on/off all KB/typing features.
maubig said:
To turn off auto complete and auto correct:
Menu->settiings->Locale & Text->Touch Input (or whatever KB u r using)->Text Input
From here you can turn on/off all KB/typing features.
Click to expand...
Click to collapse
Thanks maubig, but those settings don't help change the autocompletion for the full keyboard. VK isn't giving me the problem.
Ok, I seem to have figured out how to kill that annoying text suggestion pop up when using the hardware keyboard. When it pops up, double click menu button. To re-activate it, touch the text box once, then start typing. Seems to work.
the1wingedangel said:
Ok, I seem to have figured out how to kill that annoying text suggestion pop up when using the hardware keyboard. When it pops up, double click menu button. To re-activate it, touch the text box once, then start typing. Seems to work.
Click to expand...
Click to collapse
Excellent Angel! That worked perfect for me. Did the trick exactly like you said it would. Lets see if it works for other people too. Time to change thread title. Thanks : )
Thanks for this... I despised that stupid black suggestion box.
Hi there just wondering if anyone had/has this problem and knows how to fix it. Basically when i go to reply to a text message by clicking on it (from inside TouchFlo) the keyboard appears, then dissapears. When i click on the box to type, the keyboard comes up, then jumps back down. I have to press the 'Keyboard' button when the keyboard is down (to bring it up) then type somthing (which doesn't appear) and then press space...to even start typing anything. It's really odd, i've tried re-flashing both stock and a few other ROM's...same wierd problem...anyone?
THANKS!
I also have the same problem. If i double tap a message from within touchflo there is no problem but if i tap it once i have the keyboard problem. It has been bugging me for a while as well! Although it's not major, if anyone has a fix it would be much appreciated.
haha it's really annoying the double clicking things doesnt work for me...anyone got a fix? also what rom are you running? thanks
Deleted....
talking to some of my friends, i've realised that this happens on general windows mobile, not just this phone, therefore i will re-post in order to gain more publicity. Thanks
Fortunately for me, everything is working fine, as in the manuals, even after using this set for over a year now. When I click "reply" from within TF, it automatically gives a text/message typing area and a keyboard area at the bottom half which stays there. I can drop the keyboard down (and up) by tapping (once) the keyboard icon at the bottom centre. no problem.
ha! it's lucky for some! What ROM are you using? Thanks
drakhra said:
ha! it's lucky for some! What ROM are you using? Thanks
Click to expand...
Click to collapse
Stock ROM ver: 1.40.707.2 (21259) date 24/10/08
hi just wondering if anyone has managed to fix this, it is getting REALLY annoying now ahha thanks
It seems that when using swipe in portrait mode I cant get tap and hold to work. I.E selecting symbols and numbers.
It works well in landscape though.
Anyone have this issue? Is there a fix?
I (and others have mentioned it) gave up on the 3.9 swype for exactly that problem.
well that's not cool... I was getting good at it too. oh well, guess I'll deal with it till an update comes out.
thanks
Two things that helped me:
1) Set the error tolerance to maximum in the opitons.
2) Press on the top half of the button and keep your finger as steady as you can.
It works for me. Though, it is really really sensitive to movement. It does take some pratice and steady finger to get the tap-hold to work. It's usually the '?' that I'm going for. Sometimes it will produce 'mm' or 'mn'..
It seems like they need to make it less sensitive for movement if you're just holding one a single key and not swiping. Or make it deduce that I'm going for the '?' and NOT 'mm' which does not make much sense..
Newman180 said:
well that's not cool... I was getting good at it too. oh well, guess I'll deal with it till an update comes out.
thanks
Click to expand...
Click to collapse
I had the same thing happen. A LOT of our Swype's are faulty. The trick is to google or search xda for Swype 2.0 wvga. This works LIKE ITS SUPPOSED TO. You can use it and the qwerty keyboard arrangement is arranged propertly on the numeric keyboard tab.
steve austin said:
I had the same thing happen. A LOT of our Swype's are faulty. The trick is to google or search xda for Swype 2.0 wvga. This works LIKE ITS SUPPOSED TO. You can use it and the qwerty keyboard arrangement is arranged propertly on the numeric keyboard tab.
Click to expand...
Click to collapse
Thanks, I'm doing that now. What version came on TMOHD2?
Ok so I downloaded/installed the cab for Swype 2.0 with the htc skin
http://forum.xda-developers.com/showthread.php?t=60494
The skin looks different, which is great, but swype acts the same. Doesnt allow symbols. Also when I go into "about swype" it is the same version and build date of 1/09
Did I do something wrong?
Newman180 said:
Thanks, I'm doing that now. What version came on TMOHD2?
Click to expand...
Click to collapse
3.9 i believe. garbage (at least on mine).
So, does the Swype 2.0 wvga link fix the problem? Cause this press and hold BS is really driving me nuts.
EDIT Just downloaded, it seems to be SLIGHTLY more accurate/easier, but still not as simple as they make it look in the video, it's still quicker to switch tabs and type in whatever you need to.
donalgodon said:
Two things that helped me:
1) Set the error tolerance to maximum in the opitons.
2) Press on the top half of the button and keep your finger as steady as you can.
Click to expand...
Click to collapse
I second this fix. However, you have to place your whole finger on top of the key (contacting the key to the left and right of the key you are trying to press as well) and hold in order to get the secondary set to work.
Swype settings are accessible via Settings tab, Menu, All Settings, Personal, Input, Swype Options.
EDIT: Nevermind, I was only getting lucky with the long press. It still seems to only work about 10% of the time with the 3.9 stock version.
Y not just use the symbol button? It's faster and better than pressing n holding. And as for using the ?, just pressit and drag or swype to the space bar. Same for . and !
aceo07 said:
It works for me. Though, it is really really sensitive to movement. It does take some pratice and steady finger to get the tap-hold to work. It's usually the '?' that I'm going for. Sometimes it will produce 'mm' or 'mn'..
It seems like they need to make it less sensitive for movement if you're just holding one a single key and not swiping. Or make it deduce that I'm going for the '?' and NOT 'mm' which does not make much sense..
Click to expand...
Click to collapse
For the ? symbol, there's an easy alternative - swype (drag) from the ? key to the spacebar. Wish all the symbols & numbers did the same thing, would prefer it over the click & hold method.
Also - everyone knows about dragging from the swype symbol to around the #5 to go to the numeric keypad and draw from the swype symbol to umm.. the one to the right to go to the arrows/copy/paste screen shortcut?
Anyway, my main Swype problems are this hold/press thing & how hard it is to do manual typing for usernames & password. It's for these reasons that I use SlideIT over Swype at the moment.
Yep... doesnt work for me either. Sucks having go to down and switch it to number mode just to select symbols but I still like it over the regular keyboard.
srgntdvs said:
Y not just use the symbol button? It's faster and better than pressing n holding. And as for using the ?, just pressit and drag or swype to the space bar. Same for . and !
Click to expand...
Click to collapse
Ohh I love you! This works great - very fast.
brownhornet said:
Yep... doesnt work for me either. Sucks having go to down and switch it to number mode just to select symbols but I still like it over the regular keyboard.
Click to expand...
Click to collapse
I was about to give up on swype because of the issue.
then I saw that space bar on random tutorial, it makes it a little bit easier, but still. other symbols are very annoying.
Oops mistake!
Search Google or XDA for SWYPE 2.0 for WVGA. All the problems will be solved. Swype 3.9 is horrid. 2.0 is the truth.
Testing out version 2 on my TMOUS (version 3.9 by drefault). So far seems to be working much better - I can press & hold & get the alternate puncuation/numbers (although I still say sliding any alternate keystroke to the spacebar would be better).
QUESTION - how the heck do I get to options on this version? In 3.9 you went to symbols & help the Swype key down. Google says I click the arrow (stock rom, so 6.5.1) & go to options, but I only gen sense-like options instead.
There another way to get to the options in 2.0 ?
polstein said:
Testing out version 2 on my TMOUS (version 3.9 by drefault). So far seems to be working much better - I can press & hold & get the alternate puncuation/numbers (although I still say sliding any alternate keystroke to the spacebar would be better).
QUESTION - how the heck do I get to options on this version? In 3.9 you went to symbols & help the Swype key down. Google says I click the arrow (stock rom, so 6.5.1) & go to options, but I only gen sense-like options instead.
There another way to get to the options in 2.0 ?
Click to expand...
Click to collapse
HTC/ Microsoft and Swype don't make it easy do they:
1. Go to settings tab on sense
2. tap menu
3. selct "all settings"
4. select "personal" folder
5. select "input options"
6. BAM!
Anyone else try out these slide-out browser quick controls?
I 'love' them. I turned them on a few days after getting the tab and havent looked back.
How about you?
To enable this feature for the stock browser go to settings - labs - quick controls and make sure the box it ticked. Now in the browser, slide in from the side and a wheel of sorts will pop out with all your controls.
Very slick feature.
I have been using them since day one. Love it.
Yes, they're handy once you get the hang of them.
Very nice, thanks for sharing that tip!
To enable this festure for the stock browser go to settings - labs - quick controls and make sure the box it ticked.
Where is this? Dont have an entry for "labs" under "settings"?
Settings in the browser, not general setting on the tablet. Top right corner in the browser.
I think it actually comes enabled by default on the Xoom; needless to say it was refreshing to see when I first started using the tablet. Using the menu in the upper right hand corner is not as user friendly.
The only thing I have noticed is that it is difficult to initiate controls with the acer case, because the edge comes right up to the screen. I usually have to attempt the gesture a couple of times in order for the controls to come up.
dhruvmp said:
The only thing I have noticed is that it is difficult to initiate controls with the acer case, because the edge comes right up to the screen. I usually have to attempt the gesture a couple of times in order for the controls to come up.
Click to expand...
Click to collapse
I've never had that problem. Simply slide your finger 'into' the screen, from the bezel. Works like a charm every time and I love how it appears at the exact position your finger made the sliding motion into the page, rather than a single static location.
If I had one feature request, it would be 1 more button you could use to hold it as a handle to slide the wheel up or down the side, and tap it to pin it or unpin it.
Heh - didn't even know this existed until I saw this thread. Not sure I like it though - I usually close the last tab to close the browser (since back makes you step through all pages viewed and home would leave it open.)
cybermage1 said:
Heh - didn't even know this existed until I saw this thread. Not sure I like it though - I usually close the last tab to close the browser (since back makes you step through all pages viewed and home would leave it open.)
Click to expand...
Click to collapse
How do you close the browser with last tab? The tab disappears and browser turns full screen everytime specially when there's only one tab left. I find it hard to bring the tab to appear again.
Sent from my A500 using Tapatalk
funny I know... I open up a new blank one... close the last one and then hit the back button to close the whole thing out... he he... I woudn't mind if the tabs were up there all thetime or use a quick menu to pop it up and down...
You can actually just do a long press on the webpage and it will bring up the tabs at the top, then you can close them.
dhruvmp said:
You can actually just do a long press on the webpage and it will bring up the tabs at the top, then you can close them.
Click to expand...
Click to collapse
Yup. I just tried that and it does indeed work. Thanks for the tip!
dhruvmp said:
You can actually just do a long press on the webpage and it will bring up the tabs at the top, then you can close them.
Click to expand...
Click to collapse
That's how I do it right now, but sometimes it selects the text for copy/paste instead of displaying the tab. You really have to find an empty spot on the browser page to make it work. Adding a new tab and closing, then closing the last tab requires a really fast finger to catch the last tab. Sometimes I'm slow to click on the last tab and it just hides again. How I wish the default browser has an option to exit, similar to Dolphin browser.
Why the desire to have an exit, to hide the porn your surfing?
Keeping the browser in memory is useful, because that is alot of what I use this thing for.
gammaRascal said:
Anyone else try out these slide-out browser quick controls?
I 'love' them. I turned them on a few days after getting the tab and havent looked back.
How about you?
To enable this feature for the stock browser go to settings - labs - quick controls and make sure the box it ticked. Now in the browser, slide in from the side and a wheel of sorts will pop out with all your controls.
Very slick feature.
Click to expand...
Click to collapse
Yep, I turned them on the first day I got mine. Love 'em!
May not be neccessary for certain users, or devices running honeycomb 3.1 or higher.
For anyone like myself, who uses a different keyboard (I use thumb keyboard) from the default setup (which is the Asus keyboard), an app called Tasker can make it a bit easier for you to switch them on the fly. It's not a fantastic method and there's probably a better way to do it, but for now I thought I'd share what I did with you all. It might not be necessary for your device. It was for me because it wouldnt auto switch the input method or allow a quick change, I guess it depends on which language/model/SKU you have. Just do the following to get a popup allowing you to change the input method when docked/undocked:
----
-In tasker create a new profile called 'Keyboard', click 'ok'. Click 'state', then 'keyboard out'. Click 'Done'.
-Create a new task. Call it 'Docked'. Click 'Ok'. Click the '+' then 'Input' category, select 'Input Method Select'. Click 'Done'. Then 'Done' on the next screen. (This will bring up a screen when you dock your tablet to let you choose the Asus option)
-Click the new task you have created called 'Docked'. Select the task option 'Add Exit Task'. Click 'new task'. Name it 'Undock'. Click 'Ok'. Press the '+', 'Input', then 'Input Method Select' again. Click 'Done'. And 'Done' once more.
-Make sure at the bottom right of the main screen it shows 'On'. and click 'Apply' at the bottom left of the screen.
----
Exclude tasker from any task manager you may have installed.
*Tip* If you keep getting 'Active' popping up in the notification area, go into Tasker>Settings>Preferences>click the monitor tab, then uncheck 'run in foreground'.
Now when you plug the tablet into the dock it should get a popup with a box to let you select the Asus keyboard, so that your keypresses correspond to the letters printed on the keys. And when you undock from the keyboard, just wait about 10 seconds and you should get another popup allowing you to change the keyboard back to what it was before. If you dont get this popup then just press the tasker icon in the notifcation area and select the keyboard you want manually.
All done. Enjoy.
thanks for the heads up..Haven't used tasker yet, will give it a shot tonight.
Wait, what keys don't work when you're not using the asus default keyboard?
Thanks for the write-up. I'm a fellow tasker user and will be setting this up when I get home
daoist said:
Wait, what keys don't work when you're not using the asus default keyboard?
Thanks for the write-up. I'm a fellow tasker user and will be setting this up when I get home
Click to expand...
Click to collapse
No, they DO work if you have the Asus keyboard selected. So if you're already using the Asus one you don't need to do any of this. This guide is for people who aren't using the Asus input method and have chosen to use a different input method, such as the default honeycomb one, thumb keyboard, etc. I've never been good at putting my thoughts into words, so if it's not clear, spell it out for me what you're not understanding and I'll change the post. Cheers.
stuntdouble said:
No, they DO work if you have the Asus keyboard selected. So if you're already using the Asus one you don't need to do any of this. This guide is for people who aren't using the Asus input method and have chosen to use a different input method, such as the default honeycomb one, thumb keyboard, etc. I've never been good at putting my thoughts into words, so if it's not clear, spell it out for me what you're not understanding and I'll change the post. Cheers.
Click to expand...
Click to collapse
I always have either the thumb keyboard and the stock android keyboard select and haven't noticed anything not working. What exactly doesn't work?
jratzo said:
I always have either the thumb keyboard and the stock android keyboard select and haven't noticed anything not working. What exactly doesn't work?
Click to expand...
Click to collapse
The numerical button 3 trying to make the £ symbol and the # key making a \ symbol, were a few I noticed. There might be others though.
stuntdouble said:
The numerical button 3 trying to make the £ symbol and the # key making a \ symbol, were a few I noticed. There might be others though.
Click to expand...
Click to collapse
Ahh gotcha, I'll have to check it out. I use tasker on my phone do i could easily use it on my TF
Thanks for this, makes the hassle of switching keyboards that much more fun and cool!
Wait. I don't understand. I use Thumbkeyboard and the dock. I switch back and forth with no problems. When I undock, it goes back to thumbkeyboard. When I dock, it uses the hardware keyboard. All of my keys work.
What exactly is the problem you're trying to fix with Tasker?
dmeehl said:
Wait. I don't understand. I use Thumbkeyboard and the dock. I switch back and forth with no problems. When I undock, it goes back to thumbkeyboard. When I dock, it uses the hardware keyboard. All of my keys work.
What exactly is the problem you're trying to fix with Tasker?
Click to expand...
Click to collapse
For those of us in the UK, the hardware keyboard defaults to US mode if you dont have the Asus keyboard selected in UK mode. (if that makes sense)
Using tasker gives you a quick visual reminder to switch to the right keyboard.
If you're in the US I guess this issue won't affect you?
i use better keyboard 8, and while it warns me when i put it on the dock, i have not found any issues
Must be a non US issue i have not noticed anything other then the warning. Off to try all the keys
Thanks for the writeup!
I use Swiftkey BETA. I just don't understand why Tasker doesn't give you the option to already select a keyboard to change to. Doesn't make sense to me!
does anyone know how to disable the popup when docking?
That would be good. I guess you'd just have to create a Go Home task for when it is docked to eliminate that initial popup. I added a "Go Home" property and moved it above the "Select Input Method" property and it seems to have removed that annoying "Asus Recommendation" popup.
Perhaps this should be added to the first post on this thread?!
BTW, a bit off topic but I figured everyone here has a dock so I thought I'd ask.
Anyone else's SPACEBAR key seem a bit "louder", as in, easier to press than the rest. Not that it is that much of an issue, but the other keys on my dock seem a bit quieter to press over the SPACEBAR.
akarol said:
That would be good. I guess you'd just have to create a Go Home task for when it is docked to eliminate that initial popup. I added a "Go Home" property and moved it above the "Select Input Method" property and it seems to have removed that annoying "Asus Recommendation" popup.
Perhaps this should be added to the first post on this thread?!
Click to expand...
Click to collapse
Will test this tomorrow when im not half asleep and add if necessary. Thx.
Edit: It appeared to do it the first time for me, but after that it still shows the Asus reminder box. Did you add any other lines maybe? Not sure if the first time was just a fluke or to do with tasker.
It would be nice if there could be better solution for this...
MaluNoPeleke said:
It would be nice if there could be better solution for this...
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1118164
Thanks for this. I don't dock, but have a slideout which i love swiftkey to assist with, and prefer swype for portrait touchscreen on-the-fly. It'd be nicer if it was automatic, but it's definitely more friendly with this popup on keyboard out and task exit.