odd issue after upgrade - Fascinate General

Hey guys i updated to 2.3.3
i thot my root was still good cause i can still install apps from sd..
so recently i downloaded root toolbox..
when i opened it it says please root device before use...
so googled 2.3.3 fascinate root..
i tried super one click no success..
so i found a tutorial that uses odin..
so it seemed to have worked but the phone did not stop rebooting?
so flash it back with factory ROM found on the same page of tutorial..all good..
tried to re install superuser..still the same?
is this version rootable or what??
Fascinate from telus 2.3.3 kernel 2.6.35.7-t959tlkg2

This can be answered with research.
Please refrain from posting questions in the General section. Use Q&A.
Sent from my SCH-I500 using xda premium

2.3 is rootable but the easiest method is just to flash an already rooted rom (such as pwgb) to your phone.
and yes, please take a minute to familiarize yourslf with the forum rules. Thank you.

Related

Wont apply update

Ok so I have a question my I recently rooted my friends fascinate and tried to flash a the blackhole rom but it said error cant apply update.zip so I just needed a solution to this problem
Sent from my SGH-T959 using XDA App
http://forum.xda-developers.com/showthread.php?t=861018
Post to general next time unless
A) you have some very interesting and specific insights about moving current development forward
B) you are releasing a kernel or mod for this device.
Swyped w/ XDA App. When in doubt, mumble.
As the poster above me has already pointed out, this thread does not belong here.
Although I agree with the above statements, I'll still offer you some assistance. My first thought is that the phone is not actually rooted. Double check to be sure.
I say this because the same thing happened to me recently (I tried installing Blackhole 3.0 and got an update failed message) and the problem was that I had forgotten to root after odin-ing to stock DL09.
Sent from my Voodoo5/Blackhole3.0 Fascinate
Most of the time people miss the step to flash cwm using Odin. Did you do this?

Root

Hey guys just got the atrix and it's on
What's the easiest way you found to root it?
Sorry it won't let me post in development for some reason
Sent from my MB860 using XDA App
it depends what firmware ur on
Gladroot. the link is in my signature below.. make sure you follow the instructions carefully depending on your situation.
Right now, it appears Gingerbreak roots everything, but you need an SD card. See the Atrix Dev forum.
Ok thanks guys will try ginger break
Sent from my MB860 using XDA App
rushmore1205 said:
Hey guys just got the atrix and it's on
What's the easiest way you found to root it?
Sorry it won't let me post in development for some reason
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
And you should not post in development as your question is not development related.
try typing root in the search box, or any question, you usually get some good answers
I've got a brand new Atrix running 1.26. So far in this thread they recommended Gladroot and someone else Gingerbreak. Is there a benefit to using one over the other? I am admittedly an Android noob and been reading a lot trying to understand flashing SBF, ADB, CWM, etc. Knowing there is a beta update soon to be tested, I would like to use a method that is most likely to work with a new update should it follow on the heals of the beta.
If you have an SD card around, update now, then run Gingerbreak.
If not, follow the process in the Gladroot thread to getting root on 1.57. Assuming you care about the update... there's really no reason not to have it.
In the future, please search before posting a new thread. This has been discussed hundreds of times on this forum, and with a bit of legwork you could have easily gotten all of this info for yourself. Although I will admit the root situation is a bit more confusing now that a new exploit has been found.
Gladroot will give you the option to enable sideloading Gingerbreak does not.
thats just my 2 cents
sent from XDA mobile

[Q] 2.3.4 jvp is missing some important app

hi guys i install 2.3.4 from samfirmware and when i check i have no CMW and Superuser app installed in it.......can anyone tell whats that mean coz i m really stucked that how i make the titanium backup without supperuser......coz it is not allowing me to use titanium backup and some other apps.
The firmware from samfirmware is official, so it does not come with superuser or CWM. Check the dev section and flash a kernel with CWM, and superuser. I suggest CF-root.
or hardcore.. speedmod is the best on my jvp for now
can u plz tell me what is dev section and how i get rom from their plzzzzzz
I'm wondering, you had a phone with root, superuser and cmw before upgrading to 2.3.4? How did you get your phone to that point before this upgrade? Because the process would be the same really.
ali_khalid5518 said:
can u plz tell me what is dev section and how i get rom from their plzzzzzz
Click to expand...
Click to collapse
are you kidding?
DEV Section
sorry for that i cant get ur word that time.....thanks for this and plz tell me which one is best rom.
My advice.Do not flash rom before one week of reading posts in xda forum.
What about Sammy application, which are missed in 2.3.4,?
I was affected to Konami Crazy Cart game
I miss the allshare application!!!!!!!!!!
barvna said:
I miss the allshare application!!!!!!!!!!
Click to expand...
Click to collapse
I still have Allshare in 2.3.4, downloaded from SammyFirmware
in 2.3.4 some apps just like Superuser and CMW is not built in it........but this firmware is bit fast then 2.3.3 u can manually install superuser
superuser and cmw are not built into any android version. You can dowload superuser from the market but I believe your phone needs to be rooted to use it.
In effect these are after market add ons that will give you more functionality. But they are nothing to do with google.
Ali, if you don't mind me asking did you purchase your phone second hand? Or have someone else do some stuff to your phone for you? I'm only asking because I would normally assume that a person that has rooted, and applied cmw to their phone would know that they've done it after market.
Anyway, hope everything goes well for you so far. But have a good read around the various forums in the i9000 galaxy section. There's lots to learn.
well my phone is rooted buddy last i m using jvk rom 2.3.3 and i have superuser and cmw in it and the darky and other all contain these apps but this one not have these apps.......so why it is
Go back to the first page of this thread again, and read carefully what everyone has said... again!
All the answers are there for you!
ali_khalid5518 said:
well my phone is rooted buddy last i m using jvk rom 2.3.3 and i have superuser and cmw in it and the darky and other all contain these apps but this one not have these apps.......so why it is
Click to expand...
Click to collapse
Darky's ROM comes pre-rooted, as do most of the roms in the DEV section. The rom you installed (JVP 2.3.4) is a STOCK rom from SAMSUNG. Stock roms do not have CWM, Superuser and are NOT rooted.
You need to read this whole thread again. All your answers are in it. Simply, custom rom may contain cmw, root and su. Non custom won't. You have non custom.
ali_khalid5518 said:
hi guys i install 2.3.4 from samfirmware and when i check i have no CMW and Superuser app installed in it.......can anyone tell whats that mean coz i m really stucked that how i make the titanium backup without supperuser......coz it is not allowing me to use titanium backup and some other apps.
Click to expand...
Click to collapse
Lol
Sent from my GT-I9000 using XDA Premium App

[Q] downgraded to 2.3.3 for CM7?

do you have to be rooted to downgraded to 2.3.3. i want to downgrade to use cm7. thanks.
i am on a mytouch4g.
previous posts talks about being rooted before, i just need some clarification.
thanks.
Need root, S= off, and clock work recovery to flash custom roms.
there are guides in the dev section on how to achieve all this. MAKE SURE YOU READ EVERYTHING about this before you start. Don't be like the tons of others who half ass read and end up posting "tried to root phone, won't boot now" threads.
Sent from my HTC Glacier using Tapatalk

in need of a good htc evo 4g stock rom

ive been searching for a good htc evo 4g stock rom so i can root my phone. but guess im bad luck or something and everytime when i run a stock ruu exe it would give me an error stating that i need a complete ruu file. do anyone know where i can find this? ive downloaded at least 5 differernt stock rom exe files and none of them would work! thx
Do you mean stock as in not rooted or stock as rooted, but unchanged?
Edit: BTW, this should go in Q&A if not general.
This isn't the right thread...but try Tommy's classic rom...
Sent from my PC36100 using XDA App
What's wrong with your current stock ROM? It should be easy to root what ever stock ROM you currently have on your device with revolutionary S-OFF method.
Firstly you need to do some reading on how to root your phone using either the unrevoked or revolutionary method to then be able to use Custom ROMs. Also, keep in mind that the development thread is only for posting developed work; this thread belongs in the Q&A section instead.
well its my first post so give me a break ok? well i was trying to unroot it with unrevoked but i got a error telling me that my firmware was to up to date. so my plan was to download a older shipped rom so i can unroot it but i guess the file that i have was bad so now im stuck on the main screen with "triangles on all 4 corners and htc logo on the center. i cannot get the phone to bootloader as well.
Are you trying to root or unroot you have said both double check before you send your reply so we have accurate information to help you I don't know what you're trying to do from your posts

Categories

Resources