[Q] 2.3.4 jvp is missing some important app - Galaxy S I9000 General

hi guys i install 2.3.4 from samfirmware and when i check i have no CMW and Superuser app installed in it.......can anyone tell whats that mean coz i m really stucked that how i make the titanium backup without supperuser......coz it is not allowing me to use titanium backup and some other apps.

The firmware from samfirmware is official, so it does not come with superuser or CWM. Check the dev section and flash a kernel with CWM, and superuser. I suggest CF-root.

or hardcore.. speedmod is the best on my jvp for now

can u plz tell me what is dev section and how i get rom from their plzzzzzz

I'm wondering, you had a phone with root, superuser and cmw before upgrading to 2.3.4? How did you get your phone to that point before this upgrade? Because the process would be the same really.

ali_khalid5518 said:
can u plz tell me what is dev section and how i get rom from their plzzzzzz
Click to expand...
Click to collapse
are you kidding?
DEV Section

sorry for that i cant get ur word that time.....thanks for this and plz tell me which one is best rom.

My advice.Do not flash rom before one week of reading posts in xda forum.

What about Sammy application, which are missed in 2.3.4,?
I was affected to Konami Crazy Cart game

I miss the allshare application!!!!!!!!!!

barvna said:
I miss the allshare application!!!!!!!!!!
Click to expand...
Click to collapse
I still have Allshare in 2.3.4, downloaded from SammyFirmware

in 2.3.4 some apps just like Superuser and CMW is not built in it........but this firmware is bit fast then 2.3.3 u can manually install superuser

superuser and cmw are not built into any android version. You can dowload superuser from the market but I believe your phone needs to be rooted to use it.
In effect these are after market add ons that will give you more functionality. But they are nothing to do with google.
Ali, if you don't mind me asking did you purchase your phone second hand? Or have someone else do some stuff to your phone for you? I'm only asking because I would normally assume that a person that has rooted, and applied cmw to their phone would know that they've done it after market.
Anyway, hope everything goes well for you so far. But have a good read around the various forums in the i9000 galaxy section. There's lots to learn.

well my phone is rooted buddy last i m using jvk rom 2.3.3 and i have superuser and cmw in it and the darky and other all contain these apps but this one not have these apps.......so why it is

Go back to the first page of this thread again, and read carefully what everyone has said... again!
All the answers are there for you!

ali_khalid5518 said:
well my phone is rooted buddy last i m using jvk rom 2.3.3 and i have superuser and cmw in it and the darky and other all contain these apps but this one not have these apps.......so why it is
Click to expand...
Click to collapse
Darky's ROM comes pre-rooted, as do most of the roms in the DEV section. The rom you installed (JVP 2.3.4) is a STOCK rom from SAMSUNG. Stock roms do not have CWM, Superuser and are NOT rooted.

You need to read this whole thread again. All your answers are in it. Simply, custom rom may contain cmw, root and su. Non custom won't. You have non custom.

ali_khalid5518 said:
hi guys i install 2.3.4 from samfirmware and when i check i have no CMW and Superuser app installed in it.......can anyone tell whats that mean coz i m really stucked that how i make the titanium backup without supperuser......coz it is not allowing me to use titanium backup and some other apps.
Click to expand...
Click to collapse
Lol
Sent from my GT-I9000 using XDA Premium App

Related

Flashing Problems

Hey guys,
I have been trying to flash my Samsung Vibrant for a few days now with no success. I rooted the phone using superoneclick, then I clicked on Axura's link on android development section to get Axura 2.3.1.2. I followed the video posted by the dev to install the new Rom. It stated to use OCLF, then use Rom manager to install the app.
Well I went into Rom manager installed clockworkmod recovery 2.5.1.2 I believe it was. Then I click on install Rom and it asked if I wanted to backup current rom and wipe cache. I checked both and hit okay, the list came up where I had Axura installed on my Sd I clicked that......it said phone will reboot into clockworkmod recovery to load, after that is when the problem starts. It automatically goes into Samsung recovery i select reinstall packaged and get error e: signature not verified.
I have tried to get into recovery manually by holding vol -+ and power but still loads into samsung recovery not clockwork. Has anyone ran into this problem before?? I've searched all over the forum and google and could not find any info to help me with this. I really would like to install some custom Roms to try them out.
Thank you very much in advance to anyone who can help. I tried to be as specific as I can with the problem but if you guys need more info I can give more. Thank you
Have you updated to 2.2 already? The official 2.2 comes with a new recovery version, that causes problems with CWR.
If you had upgraded, odin back to 2.1, then root and flash a custom firmware from there. I recommend Bionix V 1.3.1, it is pretty beast.
Sent from my SGH-T959 using XDA Premium App
jamesd86 said:
Have you updated to 2.2 already? The official 2.2 comes with a new recovery version, that causes problems with CWR.
If you had upgraded, odin back to 2.1, then root and flash a custom firmware from there. I recommend Bionix V 1.3.1, it is pretty beast.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
I upgraded to 2.2 Froyo with Kies Mini couple of weeks ago. I was tired of waiting for it and thought it was going to be a big improvement over Eclair but didnt notice anything except losing my MMS messaging!
Is there any way to do it with Froyo before I Odin back to Eclair?
Thank you
rhonal89 said:
I think you need to reflash pick the vibrant out of the list and when superuser pups up click ok.
http://forum.xda-developers.com/showthread.php?t=734164
Visit www.tomorrowisnews.com For Android news and more.
Click to expand...
Click to collapse
?? I'm sorry I'm a noob to all this so I may not be understanding the quick terminology. Thank you for your response.
Therr is a thread im the dev section on how to modify the recovery but tbh its easier to odin and start the process over...it's not like you weren't going to habe to wipe the phone when you flashed custom firmwares.
Sent from my SGH-T959 using XDA Premium App

How to root t-mobile vibrant with Froyo 2.21,froyo UVKB5 ,

I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted.
Lol and don't forget tto tell people how to get to clock work mod! Wait do you even know how to? Not trying to be mean bro.
Sent from my SGH-T959 using XDA App
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Been a while but look at the modified 3e recovery in the development section ...or you can odin back to jfd and root from there
Sent from my SGH-T959 using XDA App
lotusandstone said:
Well, I really don't know, made this post as I almost can't find anything on internet about it.maybe u can tell me.
Click to expand...
Click to collapse
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Thanks, guy, I'm ok with what I have right now, made this post as I thought it maybe can help someone like me,not very expert.
^ try some of my guides.
HG! said:
You have to flash a new kernel. Then you can use ROM Manager to flash a new ROM.
I rockin Trigger atm. and I LOVE IT.
Click to expand...
Click to collapse
Lol no that is not how you do it! You have to have a modified 3e recovery first then you can start flashing things its not as easy as that. Since the 3e recovery checks update.zip you cannot flash clockworkmod that easily you can do it on jfd that easy but not an update which has a 3e recovery!
Sent from my SGH-T959 using XDA App
well how do you flash CMD on 2.2.1 then?
Just wanted to give a quick thank you as this worked perfectly for me! The 2.2 version of super-one-click constantly had me hanging but I'm glad to have found this older version and it worked like a charm
Nope did not work: UVKB5: V1.9.1 "Failed" - V2.2 - Hangs.
wHERE are they right instructions step by step? dont want to make mistake
thanks
If all you are wanting to do is Root the phone, then look in the Q&A stickie for the Noob Guide. Has a flashable Rooter right there. If you can't find it, click the link in my signature.
I have never been able to get Superoneclick to work on any phone I have tried, for various reasons but still...
AIO Vibrant Toolbox
'nuff said.
Yes, it works!
lotusandstone said:
"I upgraded my vibrant to the lastest official rom, froyo UVKB5 , juse for those who still looking for the way to root it, I used the Super one click version 1.91 , and it works, remember ,only the version 1.91 will work, all other earlier version will not help you.
Certainly you will have to install the usb driver for Vibrant,
then download the SUPER ONE CLICK software ,
and select "USB DEBBUGING " on your phone,
then open the SUPER ONE CLICK programe,
connect your phone via usb,and click 'Root" ,
when it says done, reboot your phone, there you should get it rooted."
Click to expand...
Click to collapse
Thank you for this info.
I just spent a day trying to root my Galaxy S Vibrant using SuperOneClickv2.3.3 (after having it updated to Froyo 2.2). It did not work, no matter what I tried.
Finally, I came accross your post, googled for SuperOneClickv1.9.1, dowloaded and followed your instructions. It worked like a charm.
Once again, THANK YOU!

Custom Roms for ICS

Hello
I am considering installing a custom rom for ICS. I notice that some are in RC stages. I have a few questions:
What custom rom is the best for ICS?
Can you update the rom version without needing to reflash?
Thanks
oxfordmark said:
Hello
I am considering installing a custom rom for ICS. I notice that some are in RC stages. I have a few questions:
What custom rom is the best for ICS?
Can you update the rom version without needing to reflash?
Thanks
Click to expand...
Click to collapse
Lokk at here: http://forum.xda-developers.com/showthread.php?t=1427477
Allways an update version needs to be flashed, but if you are on ICS you normally are not needed to make a factory reset. Only flash the update and reboot.
Nevertheless it is usefull to safe your data. CWM backup and Titanium Backup I would advice.
You should probably post in Q&A for this stuff.
There are two prominent versions at the mo,
1 - Onecosmics ICS RC 2.1 (http://forum.xda-developers.com/showthread.php?t=1398223)
2 - Teamhacksungs ICS ROM (http://forum.xda-developers.com/showthread.php?t=1363593)
There are a few more but these are probably your best place to start.
OneCosmics version is based on stock ICS, Teamhacksungs is more of a CM7/ICS build, so not totally stock.
Both work well, but neither are perfect yet. Onecosmics is goodin my eye as i like stock. Keep it simple and hopefully little will break....
You should also read the android development page for i9000, this will show you all you need and you can read what you like!
Getting a 'Custom Rom' will be rare at this point as stock still isn't 100% to work off.
You can install both via CWM i believe. Just ensure you go from stock and backup via Nandroid or similar.
Going back to GB, you can just flash via ODIN.
Flake x
n99flake said:
You should probably post in Q&A for this stuff.
There are two prominent versions at the mo,
1 - Onecosmics ICS RC 2.1 (http://forum.xda-developers.com/showthread.php?t=1398223)
2 - Teamhacksungs ICS ROM (http://forum.xda-developers.com/showthread.php?t=1363593)
There are a few more but these are probably your best place to start.
OneCosmics version is based on stock ICS, Teamhacksungs is more of a CM7/ICS build, so not totally stock.
Both work well, but neither are perfect yet. Onecosmics is goodin my eye as i like stock. Keep it simple and hopefully little will break....
You should also read the android development page for i9000, this will show you all you need and you can read what you like!
Getting a 'Custom Rom' will be rare at this point as stock still isn't 100% to work off.
You can install both via CWM i believe. Just ensure you go from stock and backup via Nandroid or similar.
Going back to GB, you can just flash via ODIN.
Flake x
Click to expand...
Click to collapse
Do you flash it like other roms? 3 files in Odin?
oxfordmark said:
Do you flash it like other roms? 3 files in Odin?
Click to expand...
Click to collapse
No flashing is through recovery mode (cwm) . All instructions are posted in teamhacksung ics first post.
Sent from my GT-I9000 using Tapatalk
I cant see anything about flashing from a stock rom. I need a "from scratch" guide.
I myself would go for onescomics, but i just like stock android over CM7
oxfordmark said:
I cant see anything about flashing from a stock rom. I need a "from scratch" guide.
Click to expand...
Click to collapse
Basically -
you want ICS to be installed over a clean firmware install to avoid potential problems. i.e. Stock firmware (stock with root is fine by the way!) with a factory reset & cache wipe from recovery mode. THEN install ICS via CWM.
If you are on stock GB already, then just do a factory reset & Cache wipe and go from there with instructions on Onecosmics thread mentioned above etc.
Make sure you know what you're doing and backup your efs etc.
That help?
Flake x
How do you install cwm?
The instructions doesnt.give detailed instructions..
Can you post what i should do from installing cwm to flashing the rom? I am using jvu btw.
Sorry for being thick
Sent from my GT-I9000 using XDA App
oxfordmark said:
How do you install cwm?
The instructions doesnt.give detailed instructions..
Can you post what i should do from installing cwm to flashing the rom? I am using jvu btw.
Sorry for being thick
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Cripes, you should do some forum reading, i'm worries you don't know enough to be doing this to your phone (sorry, i just don't want you to do something you're not sure about...)
CWM is generally installed when you root your phone, easiest method is with Chainfire's Root (i think SuperOneClick is also working again now, but i can't guarantee it'll work on JVU).
CF-Root (Chainfire's Root) look here: http://forum.xda-developers.com/showthread.php?t=788108
Make sure you use root for JVU, and follow instructions, flash with ODIN.
This will install CWM and superuser. You can do a backup in CWM. Please read up on how it works, there are plenty of guides out there. for EFS backup, read about, i'd advise it, just in case. With root, there are programs you can download from market to do it, or Nandroid, if you know how that works.
NB: ROOTING VOIDS YOUR WARANTEE
kapeesh?
whatever you do, make sure you know what you're doing before flashing anything.
and read up on CWM and recovery mode. There be dragons in there....
Flake x
(p.s. remember to thank all the useful people yeh? )
Be careful have a good read up before you decide to flash. Make sure you read up on how to un brick your phone just in case.
Sent from my GT-I9000 using Tapatalk
Ok i have been.reading up. One morr thing. I will use the root above then back up everything. I can do this from jvu?
Sent from my GT-I9000 using XDA App
oxfordmark said:
Ok i have been.reading up. One morr thing. I will use the root above then back up everything. I can do this from jvu?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yup. Cf-root is available for JVU.
Flake x
Done, had a scare at first.
When i flashed from cm7 to ics it didnt recognise my iemi or get a signal.
I Odin'd back to JVU and flashed the kernal then went straight to ICS and its working fine.
Yeah, I got the generic imei on flashing cm7, don't know why, as I'd used cm7 before with no issues. Fortunately had a backup. Bit scary though.
oxfordmark said:
Done, had a scare at first.
When i flashed from cm7 to ics it didnt recognise my iemi or get a signal.
I Odin'd back to JVU and flashed the kernal then went straight to ICS and its working fine.
Click to expand...
Click to collapse
Glad it worked! Remember your thanks.
Flake x

[Q] [LEAK/DEV][ICS 4.0.3] Acer_AV041_A500_0.009.00_WW_GEN1 Q&A

I don't have enough posts to add to the thread in the Dev forums, so I will ask here.
My Iconia A500 is not rooted, I don't feel that I needed it to be rooted most of the time. Now that is out of the way, I have questions.
Is there a version of this Dev leak that I can flash if I don't care about rooting or recovery? I believe the version he leaked is a CWM or RA recovery flashable only, so I would need the original untouched release.
If I do flash this, I should be able to flash future versions correct, or possibly the final version of the ICS release?
Essentially I would like to use this release on my tablet without caring about root or recovery, but I also don't want to screw myself for future releases.
Is it possible to reflash back to an old Honeycomb release?
You might not be able to post in the dev thread, but you can read it. All your answers are in there, most are even in the OP!
Jilaman said:
I don't have enough posts to add to the thread in the Dev forums, so I will ask here.
My Iconia A500 is not rooted, I don't feel that I needed it to be rooted most of the time. Now that is out of the way, I have questions.
Is there a version of this Dev leak that I can flash if I don't care about rooting or recovery? I believe the version he leaked is a CWM or RA recovery flashable only, so I would need the original untouched release.
If I do flash this, I should be able to flash future versions correct, or possibly the final version of the ICS release?
Essentially I would like to use this release on my tablet without caring about root or recovery, but I also don't want to screw myself for future releases.
Is it possible to reflash back to an old Honeycomb release?
Click to expand...
Click to collapse
If you don't care about root or recovery, than it is best you stay stock, and wait for OTA updates. This will keep you relatively safe.
Take a deep Breath this could turn out to have issues and not be complete.. There is only reports that it is flash-able.This does not guarantee that is will Run properly.As its a Acer development rom leaked to the public..
I will try it after there are 2 or 3 more days of comments.If it seems to be working well.I must have Root. Hope the post above mine has helped.
JUST Think if it does not pan out you can be one that said IM SMART I WAITED..
GOOD LUCK . DONT CROSS THE STREET WITHOUT LOOKING BOTH WAYS.
This rom is very easy to be flashed on the a500, dear erica_renee. I've done it tonight and I did come, like you, from the latest version of the unrooted Acer stock ROM.
In order to do this, you must:
- flash from your PC, a rooted rom version 3.2 on your tablet with the little app "DotNetDetecter". You can download it from somewhere on XDA Iconia A500's developers threads but I don't remember in which thread I found it.
- install the app "Acer Recovery" (free on the market)
- download the zip of RA recovery (You'll find the link in the Vache's thread) and install this recovery from your CMW recovery you've installed with the rooted rom 3.2 in the first step
- download and install from the RA recovery the ROM ICS that you can download on the website of Vache... Choose the "RA recovery" version of this ROM.
Very pleasant version, this ICS ROM ... but the low volume defect when I record sounds is still present...
Again and again I'm more and more convinced that this problem comes from the LOW QUALITY of these microphones !!!
castafiore said:
This rom is very easy to be flashed on the a500, dear erica_renee. I've done it tonight and I did come, like you, from the latest version of the unrooted Acer ROM.
In order to do this, you must:
- flash a rooted rom 3.2 on your tablet with the little app "DotNetDetecter". You can download it from somewhere on XDA Iconia A500's developers threads but I don't remember in which thread I found it.
- install the app "Acer Recovery" (free on the market)
- download the zip of RA recovery (You'll find the link in the Vache's thread) and install this recovery from your CMW recovery you've installed with the rooted rom in the previous step
- download and install from the RA recovery the ROM ICS that you can download on the website of Vache... Choose the "RA recovery" version of this ROM.
Very pleasant version, this ICS ROM ... but the low volume defect when I record sounds is still present...
Again and again I'm more and more convinced that this problem comes from the LOW QUALITY of these microphones !!!
Click to expand...
Click to collapse
are you saying that you flashed the cwm version of this on a a500.or do you have a501 Or are you using the non rooted full rom version.. And yes the mic issue i agree with . Considering going to Black box and buying upgraded mics and install . but i dont use it that much.
I have an Iconia A500, renee and I flashed the leaked Acer ICS stock ROM that Vache proposes on his website.
The link is on the first page of his thread.
castafiore said:
I have an Iconia A500, renee and I flashed the leaked Acer ICS stock ROM that Vache proposes on his website.
The link is on the first page of his thread.
Click to expand...
Click to collapse
ok .
now can you go to the root for a200 thread and follow that procedure and see if it will ROOT For you..
this could be the solution if so..
Thanks in advance...
I'd try it myself, but I don't want to lose my current bootloader and the ability to flash custom roms, so I'll just wait.
I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium
M..N said:
I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I to. have the instructions downloaded and waiting.. Better things come to those Who Wait..
Impatience is often followed by hardship Turmoil.
Wow that was good even for blonde chic..
Why do you fear not being able to go back to honeycomb ?
ICS a real improvement, for me. Google chrome is a great browser too.
These are my first impressions anyway. Very good, very pleasant.
But, if you're not in a hurry, you can wait one more month, of course.
castafiore said:
Why do you fear not being able to go back to honeycomb ?
ICS a real improvement, for me. Google chrome is a great browser too.
These are my first impressions anyway. Very good, very pleasant.
But, if you're not in a hurry, you can wait one more month, of course.
Click to expand...
Click to collapse
Just in case anything happens it would be good to know if we can revert. When you flashed did you lose all your data, and anything not working in the rom?
Sent from my Desire HD using xda premium
M..N said:
Just in case anything happens it would be good to know if we can revert. When you flashed did you lose all your data, and anything not working in the rom?
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I MUST have root access. that is all..
may i ask if you have checked the fallow..
GPS.
Can you tether to a android ad-hoc network
does Ti Backup work.
Does email exchange work.
I could go on but i will not .. THANKS IN Advance
No root on ICS (yet?).
I guess that you will loose it as well when you will install this Rom as an update by OTA...
I don't really need a root on my tablet, personaly, except when I want to test a custom Rom.
There is maybe a solution to keep the root anyway. Check in the thread of Vache.
Apart from that, everything works better than ever for me (gps, tether through my htc Desire, caméra, etc ... except the recurrent prob with the microphones ).
I don't use Titanium backup (that needs root, isn't it?) but MyBackup pro.
Email exchange? Do you mean the app working with Outlook on Windows? I don't use it neither. I use gmail and I import my other accounts on gmail. Sorry. But my email accounts (pop) work perfectly well.
Everything works very well actually with this Rom. I didn't notice any problem till now. No way to go back to HC...
I wonder if Thor has this yet. He is probably the best a500 ICS dev right now.
Sent from my 3D using InfectedRom Eternity.
M..N said:
I'm just waiting for someone to confirm they can return to 3.2.1 via apx mode, once confirmed ill flash it
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Just to let you know. I have flashed with the full 4.0.3 (not CWM/rooted one), and then used the first method here to restore back to 3.0.1, then installed CWM to install a ROM without any problems. I have since updated to 4.0.3 full again as it's by far the best ROM for me.
Ny the way, I noticed this morning that the ability to disable bloatware has been added to the stock ics rom via app section of settings, so one less reason for me to need root.
Sent from my SCH-I500 using XDA App
Antarell said:
Just to let you know. I have flashed with the full 4.0.3 (not CWM/rooted one), and then used the first method here to restore back to 3.0.1, then installed CWM to install a ROM without any problems. I have since updated to 4.0.3 full again as it's by far the best ROM for me.
Click to expand...
Click to collapse
Thanks Antarell,
This is good to know for people who would be nostalgic of Honeycomb
By the way, there is a simplier way to go back to HC with a root. That's the one I've used several times with no bad issue: http://forum.xda-developers.com/showthread.php?t=1307539
This leak flies. Its awesome. Actually makes me not care about losing recovery. I really couldn't ask for more from this. At least we know there's a way back if we really need it.

[Q] Acer ring on stock 4.0.3 ROM

Hi guys. Is possible to add acer ring to stock ICS rom, what I recived today.
U need root and apk and a way to change buildprop so no not easily
Sent from my A500 using Tapatalk 2
Okay, how to root this ROM ? I saw one topic about rooting leaked from, but will it work on this rom?
Sent from my A500 using xda premium
CaH9 said:
Okay, how to root this ROM ? I saw one topic about rooting leaked from, but will it work on this rom?
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Insure it will can't tell you cuz I'm still on stock cuzmit needs to be till I send it to Acer I'm sure it will ask on the threadnim sure ppl are or have asked about the new ota
Sent from my A500 using Tapatalk 2
Go here
http://forum.xda-developers.com/sho...ader+and+fixing+broken+recovery+in+leaked+ics
This root method works. I used it on the ota ics update.
I even have recovery.
It gives you FULL root.
Make sure you read the instructions carefully.
dincdoes.me said:
U need root and apk and a way to change buildprop so no not easily
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
Anyone have the ring 1.0 apk?
My titanium backup won't restore. appears the root is not working as expected.
havoc78 said:
Anyone have the ring 1.0 apk?
My titanium backup won't restore. appears the root is not working as expected.
Click to expand...
Click to collapse
I assume you are looking for the de-odexed version.
MD
CaH9 said:
Hi guys. Is possible to add acer ring to stock ICS rom, what I recived today.
Click to expand...
Click to collapse
No , you can mod build.prop and you can install the apk but you won't get it to work. It is even present in the framework but again, no it won't work.
That needs to be done in the building process of the rom. One more reason to go custom
Ask MD , it is even a pain to get it working on custom rom. It all got to do with signing the correct apk's before you build the rom.
So don't waist your time or mess up your system it is not going to happen.
civato said:
No , you can mod build.prop and you can install the apk but you won't get it to work. It is even present in the framework but again, no it won't work.
That needs to be done in the building process of the rom. One more reason to go custom
Ask MD , it is even a pain to get it working on custom rom. It all got to do with signing the correct apk's before you build the rom.
So don't waist your time or mess up your system it is not going to happen.
Click to expand...
Click to collapse
You got that right
I'd like to know,,,, who the heck invented "signing"???? Need to take them out back for a few lessons......
That's why Civ ain't got no hair left on his head, and why mine is turning grey!!!!
MD
Hi everyone!! Im new to this forum so bare with with me. I recently bought an acer iconia A500 4.0.3 ics (leak). I rooted it with blackthunde, but then I dident like the root sooo I found a utube video that said " unroot all android devices universal", i did what they said, which was" to remove the su files and the remove superuser and then boot" however; superuser did not remove from my devic. I used the root checker to c if it worked and i guess it did because now it saids "not rooted" sooo my question is: how do i get my tablet back to the state when I first bought it? or can i remove the superuser manually? but instead of it saying uninstall it saids "remove all updates". i dont know what to do, please can someone explain how to get it to brandnew and leave no trace of root..... thank you...
First this should be a question by itself.
But I will try and help you out bud.
To get to stock you must find a ROM that is stock then flash it.
If you want absolute stock that is beyond me as I've never looked into it in ics
What ROM are you on now? if you are just rooted just factory data reset and you should be happy where it is at.
If you are trying to sell it let me know!. as any another reason to go to stock I don't know why you would..
I don't understand your post really..
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
abarzua21 said:
Hi everyone!! Im new to this forum so bare with with me. I recently bought an acer iconia A500 4.0.3 ics (leak). I rooted it with blackthunde, but then I dident like the root sooo I found a utube video that said " unroot all android devices universal", i did what they said, which was" to remove the su files and the remove superuser and then boot" however; superuser did not remove from my devic. I used the root checker to c if it worked and i guess it did because now it saids "not rooted" sooo my question is: how do i get my tablet back to the state when I first bought it? or can i remove the superuser manually? but instead of it saying uninstall it saids "remove all updates". i dont know what to do, please can someone explain how to get it to brandnew and leave no trace of root..... thank you...
Click to expand...
Click to collapse
Well, probably because superuser apk was placed in the /system/app folder and you don't have /system rw permissions anymore.. Can't remove it unless you're rooted with /system RW access.
If you want it really back to stock condition, grab one of the update ICS files from the Dev section, decrypt it, pull the update.zip from it. Copy the update.zip to your ext SD, and boot holding Vol+ and PWR. Should install the update.
Note there are 2 update ICS files, so of one doesn't work, try the other. This will put a stock ICS back on your tab.
If it goes well that is
MD

Categories

Resources