Related
Hi all, I've been having problems with my transformer... again. This time I have my transformer successfully rooted with an updated CWM, and flashed PRIME 1.6 and Netformer 1.5. The problem started when I held down power and selected the recovery option in the shutdown menu. the tablet went into a bootloop until I put it into APX mode to run the unbricking tool stickied in the dev section. For some reason, the tool didn't work and it did NOT say "phone update success on the tablet screen."
I then turned it off and my computer makes the USB disconnect sound, but then makes the connect sound right after, and Nvidia USB recovery shows up in device manager again, which means that it is stuck in APX mode. I cannot boot into CWM and I cannot boot up normally because it just dumps me back into APX.
I found a thread of someone who was also stuck in APX mode, but it doesn't help because he just returned the tablet whereas I cannot. http://forum.xda-developers.com/showthread.php?t=1169097
So to recap, I am stuck in APX mode, I can't boot normally or into CWM, and the unbricking tool does not work. Help please? I am starting to seriously regret flashing anything
EDIT: I did it! Thanks to all for the responses, I finally followed this guide to nv_flash prime 1.6r2 to my tablet and now it boots! The problem turned out to be that when I used the unbricking tool, it formatted all my data so the tablet was not able to boot into anything. By nv_flashing a rom onto it, it had something to boot into... again, thanks!
Anyone have any ideas? If I can't fix this then $400 went down the drain
Have you tried nvflash? I had that problem but nvflashing prime worked for me.
Sent from my PC36100 using Tapatalk
Vertiginouz said:
Hi all, I've been having problems with my transformer... again. This time I have my transformer successfully rooted with an updated CWM, and flashed PRIME 1.6 and Netformer 1.5. The problem started when I held down power and selected the recovery option in the shutdown menu. the tablet went into a bootloop until I put it into APX mode to run the unbricking tool stickied in the dev section. For some reason, the tool didn't work and it did NOT say "phone update success on the tablet screen."
I then turned it off and my computer makes the USB disconnect sound, but then makes the connect sound right after, and Nvidia USB recovery shows up in device manager again, which means that it is stuck in APX mode. I cannot boot into CWM and I cannot boot up normally because it just dumps me back into APX.
I found a thread of someone who was also stuck in APX mode, but it doesn't help because he just returned the tablet whereas I cannot. http://forum.xda-developers.com/showthread.php?t=1169097
So to recap, I am stuck in APX mode, I can't boot normally or into CWM, and the unbricking tool does not work. Help please? I am starting to seriously regret flashing anything
Click to expand...
Click to collapse
Did you actually flash a rom? That can happen when you dont have the appropriate files in the directory. Refer to the video that demonstrating an NVflash.
Sent from my Transformer TF101 using XDA Premium App
Yes, I flashed prime 1.6 and booted it successfully. I used the "recovery" option in the shutdown menu and that caused the bootloop, i never got into cwm
Did you compare md5's?
Sent from my Transformer TF101 using XDA Premium App
Backwardsblade said:
Did you compare md5's?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
I didn't, but it did boot up fine, which means it was a legitimate download right?
I think I'll just try to send it to asus and see what they can do since NVflash doesn't work
I would probably download again, check the MD5 and reinstall.
Skickat från min ASUS Eee Pad TF101
I can't reinstall if I can't boot into cwm
Vertiginouz I can't reinstall if I can't boot into cwm
Click to expand...
Click to collapse
Are you sure you know what nv_flash is? This is only run in apx mode.
Did you try the one click batch method: http://forum.xda-developers.com/showthread.php?t=1185104
See whether that works for you...
keep this thread open, I would really like to know what the OP did to get out of this mess.
I would also like to know if other peeps running Prime 1.6 can press the recovery button instead of shutdown for some testing.
What kind of testing? I just did root a TF, backed it up, installed Prime, clicked the Recovery button and did a back up. Zero trouble.
I think this is my 7th or 8th root. People at work just keep bringing them to my office
It sounds like you didn't have a Rom when you nvflashed. If you just downloaded nvflash file in the stickied unbricking post then you will format everything without putting anything back on. You need to Rom that was built nvflash and put it in the root directory of the nvflash folder. There are some stock Roms available somewhere & also a prime 1.4 nvflash. They will install a recovery and then you can flash whatever you want from there.
Sent from my Transformer TF101 using XDA Premium App
boglwe said:
keep this thread open, I would really like to know what the OP did to get out of this mess.
I would also like to know if other peeps running Prime 1.6 can press the recovery button instead of shutdown for some testing.
Click to expand...
Click to collapse
I am currently running Prime 1.6 and i did a recovery method the other day to update a rom and it worked just fine.
I did it since i updated from 1.5 to prime 1.6 and had to re install the Clemsyn-blades cause the overclocking rom got disabled after update...
Thanks for the suggestions guys, I'll try the link that Q.Entity posted first.
housry23 said:
It sounds like you didn't have a Rom when you nvflashed. If you just downloaded nvflash file in the stickied unbricking post then you will format everything without putting anything back on. You need to Rom that was built nvflash and put it in the root directory of the nvflash folder. There are some stock Roms available somewhere & also a prime 1.4 nvflash. They will install a recovery and then you can flash whatever you want from there.
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
Okay so the unbricking nvflash formats everything, meaning I can't boot normally because I have no ROM? Shouldn't I still be able to boot into CWM though?
Also, the prime 1.4 nvflash thread you're talking about is this right? If I follow that guide will it install prime 1.4 during the nvflash process? If so, that will probably solve my problem
should work, but why stop there, I went ahead and popped on Prime 1.6 and then flashed a different kernel as well. I mean, I nvflashed from temp brick, perhaps like yours, and instead of flashing 1.4 prime I went ahead and did 1.6 since I already had the zip. I also at some point did the unbricking nvflash to stock rom, then used the pure root for tranformer method that includes CWM and then flashed Prime. regardless, both ways I was temp bricked. The key for me was knowing that I was in APX mode even though Device Manager in wndows 7 64bit did not show I was. Hope I could help, I am only speaking from my OWN experience with this device and prior mistakes.
EDiT: I also noted as some point that I could not get into recovery becuase I was not paying attention to my recovery screen. If all is correct, then when you hold down Vol- and power button, you are only given 5 seconds to press vol+ button to enter CWM.
Sent from my Transformer TF101 using XDA Premium App
The batch pure root script didn't work for me, even though I tried nvflashing the stock boot.img and recovery. No matter what, I couldn't get out of APX mode. The transformer immediately turns back on and puts me back into APX mode after I turn it off. Device manager and the USB connect/disconnect sounds confirm this. I'm afraid there's no way to get out
Why are you doing a pure root, after nv_flash. Why not just nv_flash prime 1.6 and be done? That will have everything working.
Yep.. your doing things kinda backwords.
Sent from my PG86100 using XDA Premium App
i can';t seem to find a way to unroot with nvflash anyone have any threads to do this with also i rooted using linux now i am on windows will that complicate things i am going to send my t.f. back to asus.
bfitzpatrickd2d said:
i can';t seem to find a way to unroot with nvflash anyone have any threads to do this with also i rooted using linux now i am on windows will that complicate things i am going to send my t.f. back to asus.
Click to expand...
Click to collapse
You're going to return the TF?
Why even enter the world of rooting and tweaking if your first solution is to return the whole device? It's not like the Transformer is gimped if you don't root it, it's not a Viewsonic Gtab.
Anyway, nvFlash is incredibly simple. Install drivers, put tablet in APX mode, run the proper file inside nvFlash folder and that should be it - it will give you stock and unrooted 3.1 with 8.4.4.5 update.
I am returning cause it wont charge I am actually looking for a exchange
Sent from my PC36100 using XDA Premium App
Hey, I am having a problem with my B70 TF101 Transformer. I am not seeing any available OTA updates at all. ICS may not be out yet for me, but I don't even see the .21 update.
Here's some background, everything was fine and I was running a rooted Transformer. I installed Busybox off the market and it proceeded to remove root and make everything stop working (wireless, bluetooth, a number of other things).
I ran these steps:
(http://forum.xda-developers.com/showthread.php?t=1417006)
Update. trippmcnealy had success with a tweak to this. If it doesn't work you might want to follow his method.
1) Download http://www.multiupload.com/X65RBVD2MB
2) Unzip so you have just have "WW_epad-user-8.6.6.19.zip". Keep this zipped and copy to root of external SD.
3) Put another copy of the same file on your external SD card and name it "EP101_SDUPDATE.zip"
4) Put both files "EP101_SDUPDATE.zip" and "WW_epad-user-8.6.6.19.zip" on the root of your internal SD card.
5) Power down your TF
6) Power up into recovery - by pressing the power button and volume down button. Then press volume up when instructed by the screen.
7) You should now see the Android guy with some gears turning. This is good, actually this is GREAT! This will go on for a minute or so and then the device will reboot on its own. It will then go to the boot screen and you should see a bar showing you the progress of the update.
8) Once it has completed, install RazorClaw and root your device.
It allowed me to recover root and I am running .19 once more. Everything currently works beautifully, except I do not have any OTA updates available.
My concerns are twofold: I used WW_epad-user-8.6.6.19.zip as suggested, however I am in the US. I am wondering if that has an impact. I am also wondering if I don't see any updates because it THINKS I have .21 already completed somehow?
Any ideas?
I think 8.6.6.xx is for 3G version and the last version is 8.6.6.23. What tablet do you have?... Is only wifi or 3G version?..
For 3G no update yet.
Sent from my Transformer TF101 using Tapatalk
It's a TF101, WiFi only, no 3G.
A screenshot --> i.imgur.com/mecln.png
You do have a custom rom on your tablet, you need to get the original update 8.6.5.21(US or WW) from asus web page and flash to stock. Then you will be able to get the OTA ICS rom.
Sent from my Transformer TF101 using Tapatalk
If you currently have WW_8.6.5.21 can you flash to US_8.6.5.21 or would that cause a problem. I have not been able to find that answered for the TF101
Sent from my Transformer TF101 using xda premium
I'm confused as to how I got a custom ROM without root access at the time. Following those steps again with 8.6.5.21 is what I've been trying and it never sees the update. I put the file on both the internal and external SD in the root with two files named correctly.
I am downloading these zip files right off of ASUS' support site.
same problem with my B50 TF101
rooted with Possible fix for lost root with 8.6.5.21 steps
stuck in WW_epad-user-8.6.6.19.
Couldn't flash to WW_8.6.5.21 or US_8.6.5.21 or US_8.6.5.13
Help please!:
thanks
bgkid88 said:
same problem with my B50 TF101
rooted with Possible fix for lost root with 8.6.5.21 steps
stuck in WW_epad-user-8.6.6.19.
Couldn't flash to WW_8.6.5.21 or US_8.6.5.21 or US_8.6.5.13
Help please!:
thanks
Click to expand...
Click to collapse
Look for the NVFLASH for your device to go back to 8.6.5.13, then do the update.
goodoane said:
I think 8.6.6.xx is for 3G version and the last version is 8.6.6.23. What tablet do you have?... Is only wifi or 3G version?..
For 3G no update yet.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Sorry for the stupid question
You mean I have to switch to wifi to get the ics update or it is not available for 3g devices?
hapahopi said:
Look for the NVFLASH for your device to go back to 8.6.5.13, then do the update.
Click to expand...
Click to collapse
Thank you very much indeed
followed your advice ;
nvflash & updated to us 9.2.1.11
---------- Post added at 03:38 PM ---------- Previous post was at 02:48 PM ----------
FYI,
Can b rooted with viperMod
enjoy!
[TOOL][Updated 2.22.12]viperMOD PrimeTime v4.5 | Auto Root/Unroot/Busybox/CMW Flash!
]
hairpower said:
Sorry for the stupid question
You mean I have to switch to wifi to get the ics update or it is not available for 3g devices?
Click to expand...
Click to collapse
Is not available for 3g version devices is only for wifi devices and OTG is only for 8.6.5.21 version.
Sent from my Transformer TF101 using Tapatalk
Well, now that the thread derailment is over. For anyone who is reading this looking for help in a similar situation, here is what I did:
- I installed RecoveryInstaller.apk (Google'd for it) so I could get CWM on the Tablet.
- I then upgraded to 8.6.5.21 with that. I lost root (and CWM), but did not see any OTA updates.
- I sort of gave up at this point, since I assume it's past recovering without wiping my tablet AGAIN (had to wipe it when I did the upgrade which got me into this mess).
- I then found an upgrade to ICS which does not kill root, so I re-installed CWM with RecoveryInstaller and then flashed to ICS with that. I probably still won't see OTA updates, but I have CWM and root so I can just flash them manually if needed.
Not an elegant solution, but I lost no data and my Android tablet appears to be running just fine.
Ask any question and ill try to help you on the topic.
Sent from my ASUS Transformer Pad TF300T
My update download failed after 99 percent, now can't find update or it says failed when checking. Do you know where this 99 percent would have been stored? Maybe I can launch it from my file directory to get this going?
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Your looking at something that didn't fully download you just want the update right no root?
Sent from my ASUS Transformer Pad TF300T
I am rooted, so would be very happy to get the ota to work. I am using supersu with voodoo back up. Have tried dm/cm wipe, plus temporary unroot , cold boot, and removing sd card.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
You could download the update off Asus website and extract in your internal sd folder but after that you will lose root
Sent from my ASUS Transformer Pad TF300T
joeyman08 said:
You could download the update off Asus website and extract in your internal sd folder but after that you will lose root
Sent from my ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
I know... So frustrating!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
I lost my root and used voodo ota keeper but no luck. but to me the extra speed was worth the loss. I hopefully development on a new root will be out soon
Sent from my ASUS Transformer Pad TF300T
Know it is not possible to root JB with locked bootloader, however, is it posible to root JB with unlocked bootloader?
Do not need to install any special recovery, stock recovery, stock JB + root.
Would like to do:
1) manual update to JB using using file downloaded from Asus
2) unlocking bootloader
3) root "only"
i've successfully installed jb, but my device isn't recognising my microsd...
i've checked at these location /mnt/ - /removable/ - /storage/ -...but still cant find my microsd
i've tried remove/reinsert & rebooting (as well as cold booting) many times, but still no solution...
anybody has the same problem? any suggestion?
joeyman08 said:
You could download the update off Asus website and extract in your internal sd folder but after that you will lose root
Sent from my ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
And why would you lose root access? Flashing the file this way should not wipe your data, thus the root remains.
Trimis de pe ASUS Transformer Pad TF300T
redz91 said:
i've successfully installed jb, but my device isn't recognising my microsd...
i've checked at these location /mnt/ - /removable/ - /storage/ -...but still cant find my microsd
i've tried remove/reinsert & rebooting (as well as cold booting) many times, but still no solution...
anybody has the same problem? any suggestion?
Click to expand...
Click to collapse
I've herd of this problem maybe putting all your files on pc then format and reputation the files back.
Sent from my ASUS Transformer Pad TF300T
im already on US_epaduser9_4_3_30 on my tablet been using it,so do i still have to download it from asus and install it again?
Since upgrading to jb, the Asus task manager widget causes a lock up on a black screen if i press the One Click button... anybody else experienced this on jb?
David Dee said:
My update download failed after 99 percent, now can't find update or it says failed when checking. Do you know where this 99 percent would have been stored? Maybe I can launch it from my file directory to get this going?
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
The updated is in root/cache/dlpkgfile. The download probably failed to the overwhelming demand of download requests around the world, since most ppl have WW. Just keep trying to download again.
redz91 said:
i've successfully installed jb, but my device isn't recognising my microsd...
i've checked at these location /mnt/ - /removable/ - /storage/ -...but still cant find my microsd
i've tried remove/reinsert & rebooting (as well as cold booting) many times, but still no solution...
anybody has the same problem? any suggestion?
Click to expand...
Click to collapse
Have you tried another sdcard? If non work there might be a problem with your slot, maybe try factory reset. If it still fails you might need to exchange it and/or conctat asus
vap_66 said:
And why would you lose root access? Flashing the file this way should not wipe your data, thus the root remains.
Trimis de pe ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
It is know (like dothraki would say) that doing a manual update makes you lose root no matter what you do, you won't lose data but it seems something in the system gets overwritten making one lose root.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
ukdtweak said:
Since upgrading to jb, the Asus task manager widget causes a lock up on a black screen if i press the One Click button... anybody else experienced this on jb?
Click to expand...
Click to collapse
Try clearing the data from the task manager and/or doing a cold boot. I don't use the widget I have it disable though. If that doesn't work you might need to try a factory reset.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Okay my first firmware download failed at 43%
I cleared cache for DMClient and CMClient.. then the green arrow appeared again and then the download failed at 99%..
Is it the problem that everybody is facing?? Please help lol...
After reboot and repeating the process it check for updates and says there is no update for my device... or sometimes fails the download immediately...
OR: it shows there is a system update, but after 1 secs it loads again and shoes that there is no update...
I didnt delete any system app or unlock my bootloader
Sent from my ASUS Transformer Pad TF300T using xda premium
WIIstpM said:
Okay my first firmware download failed at 43%
I cleared cache for DMClient and CMClient.. then the green arrow appeared again and then the download failed at 99%..
Is it the problem that everybody is facing?? Please help lol...
After reboot and repeating the process it check for updates and says there is no update for my device... or sometimes fails the download immediately...
I didnt delete any system app or unlock my bootloader
Sent from my ASUS Transformer Pad TF300T using xda premium
Click to expand...
Click to collapse
Just keep trying, wait a couple of hours and try again, my bet is that asus are overwhelmed with so many download requests. Failing download doesn't mean that your system is damaged or anything, after download if you get a laying android with a ! on top, then its failing installation.
Ok ppl, I am now on JB! Did a factory reset, then green arrow came right back. Root seems to have survived, trying to restore root now.....
Sent from my SGH-I747M using XDA Premium HD app
Can anyone tar/zip/something up a V9.4.3.30 /system/bin directory, apparently my gzip with busybox is whats causing my install to fail here it wants the original gzip installed (and i assume the other files too)
thnks.
joeyman08 said:
Ask any question and ill try to help you on the topic.
Sent from my ASUS Transformer Pad TF300T
Click to expand...
Click to collapse
joeyman08 said:
I've herd of this problem maybe putting all your files on pc then format and reputation the files back.
Click to expand...
Click to collapse
jgaf said:
Have you tried another sdcard? If non work there might be a problem with your slot, maybe try factory reset. If it still fails you might need to exchange it and/or conctat asus
Click to expand...
Click to collapse
the card is readable on my pc. Already reformatted (fat32), but still no luck...
it was working fine on ics before the update, idk if this is a bug in jb
i dont have other sdcard, so i cant tell, but its working fine before the update, so i think this is software related
is there any manual method of mounting the microsd, like using the terminal or anything? (since i have root)
redz91 said:
the card is readable on my pc. Already reformatted (fat32), but still no luck...
it was working fine on ics before the update, idk if this is a bug in jb
i dont have other sdcard, so i cant tell, but its working fine before the update, so i think this is software related
is there any manual method of mounting the microsd, like using the terminal or anything? (since i have root)
Click to expand...
Click to collapse
I belive you can manually mount in settings that's at least what my epic4g touch offers in storage
Sent from my SPH-D710 using xda premium
Yea, im starting to regret buying dis thing. Ive spent the whole day going through tutorials and stuff, and all ive managed to do is install a custom recovery (CWM) that cant mount anything because its being denied permission. how dandy... I have a TF300T and build 10.6.1.27.5. I've heard that this build is not rootable, but im trying to stay optimistic here, so if you want to ruin my month by saying there is no root... well Ill go kick a rock around the freeway. Im just kidding. But seriously this is complicated. I have a rooted Samsung E4GT. which is alot easier cause of Odin, but this... idk im lost. Ive tried Motochopper and Debugfs or something like that, tried many, cant root it. Looking for some help
Cheers
I was in the same boat. I ess able to downgrade though. And then root. It was very simple. I downloaded 10.6.1.15.3 firmware for US localization ( make sure you get the right one). I unzipped it and put the file on the root of my external sdcard. As soon as I put the sdcard back in it immediately prompted me to downgrade. Worked great for me, was able to root after that no problems.
Sent from my HTCONE using Tapatalk 4
azrickster said:
I was in the same boat. I ess able to downgrade though. And then root. It was very simple. I downloaded 10.6.1.15.3 firmware for US localization ( make sure you get the right one). I unzipped it and put the file on the root of my external sdcard. As soon as I put the sdcard back in it immediately prompted me to downgrade. Worked great for me, was able to root after that no problems.
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
What he said. Hope is not lost, my friend. Just be mindful that the process erases the internal memory. In other words, this will wipe EVERYTHING including media, which normally doesn't get speed when flashing roms.
Just be sure to back up everything on your pc and/or external sd.
______________________________
HTC Evo 4G LTE
Tab
So does thats not a OTA update right? I read that you can mess up your device if you install the wrong version of the recovery depends on how you updated it
I just got my hands on this device last week. I'm not new to Android or any of this, but I did run into a few issues. I was on 27.5 now I'm unlocked and everything.
How I did it was too downgrade to 15.3 using pjc21 guide, I could not complete the guide as I was not unlocked, but once I was downgraded I could unlock and use motochopper to get recovery.
Make sure you are registered on asus site to get unlock to work.
What do you mean be registered in the asus website? I downloade the unlock tool from the asus website under the firmware then installed it
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
edtrud said:
What do you mean be registered in the asus website? I downloade the unlock tool from the asus website under the firmware then installed it
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Register you tablet with them, create an account, log in your device info.
bigtoysrock said:
Register you tablet with them, create an account, log in your device info.
Click to expand...
Click to collapse
What would I do then? I downloaded the other build, unzipped it cause the zip was in a zip file, and put it on my external card, but nothinh happened
edtrud said:
What would I do then? I downloaded the other build, unzipped it cause the zip was in a zip file, and put it on my external card, but nothinh happened
Click to expand...
Click to collapse
You have to make sure that the "inner" zip is placed on the root of your sd card. Also, try rebooting the tab with the ext plugged in. Let us know.
___________________________________________________________
ASUS TF300T - It's back from the brink of death....
Rerooted, Custom ROM, and Faster than EVER!!!
Re
I'm installing ir through fastboot right now.. Crossing my fingers
aarsyl said:
You have to make sure that the "inner" zip is placed on the root of your sd card. Also, try rebooting the tab with the ext plugged in. Let us know.
___________________________________________________________
ASUS TF300T - It's back from the brink of death....
Rerooted, Custom ROM, and Faster than EVER!!!
Click to expand...
Click to collapse
One more thing, The SD card is from my Samsung phone, It recognized it as external memory and didnt mount it. That might be the reason?
edtrud said:
One more thing, The SD card is from my Samsung phone, It recognized it as external memory and didnt mount it. That might be the reason?
Click to expand...
Click to collapse
Well... I'm an idiot... I downloaded the JP version FACEPALM. Guess i need to learn Japanese... downloaded US omg...
Register your device with Asus,download and use the bootloader unlock tool ,install TWRP 2.5.0.0, reboot into TWRP and use it to root
Sent from my TF300T using xda premium
Do your self a favor. Install twrp . Cwm is going to give you problems. Also I'm on 27.5 firmware. All updated. Then installed sdbags clean rom. It's based of 27.1 and fully rooted. Best and latest.
Sent from inside my mkv.
Re
warhammer1966 said:
Register your device with Asus,download and use the bootloader unlock tool ,install TWRP 2.5.0.0, reboot into TWRP and use it to root
Sent from my TF300T using xda premium
Click to expand...
Click to collapse
I tried it but, after i used the TWRP img it still booted into CWM
kaos420 said:
Do your self a favor. Install twrp . Cwm is going to give you problems. Also I'm on 27.5 firmware. All updated. Then installed sdbags clean rom. It's based of 27.1 and fully rooted. Best and latest.
Sent from inside my mkv.
Click to expand...
Click to collapse
Then I guess you gained more Karma points then me this month, cause im gettign no luck
Did you install the TWRP blob file through fastboot?
Sent from my TF300T using xda premium
warhammer1966 said:
Did you install the TWRP blob file through fastboot?
Sent from my TF300T using xda premium
Click to expand...
Click to collapse
yes I have tried that, But I jsut succesfully downgraded, so im going to try an install it again
YAY, finally... rooted and custom recovery. Thanks guys for all the help!
Wait, if you installed recovery then you're unlocked. Flash twrp recovery v2.5.0.0-4.2. Next, download supersu.zip...somewhere around here and put in root of your internal storage. Last go into recovery, flash supersu.zip and you're rooted.
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2