Hello!
I've installed magldr 1.13 with clockworkmod 3.0.0.5 and installed a MIUI rom on www.miui.nl. But when the rom boots, im stuck at a black screen with HTC on it.
Help?
greets
wrong forum... Mods move this pls.
Check requirements? Partition Sd-card, Cwm size correct?
dahunt3r said:
Hello!
I've installed magldr 1.13 with clockworkmod 3.0.0.5 and installed a MIUI rom on www.miui.nl. But when the rom boots, im stuck at a black screen with HTC on it.
Help?
greets
Click to expand...
Click to collapse
The reason you are stuck might be because you are using an old recovery.
[email protected] said:
The reason you are stuck might be because you are using an old recovery.
Click to expand...
Click to collapse
perhaps he didnt wait long enough or something. the cwm version he used, is the best/stable one out there, so i doubt that would be the problem
dahunt3r, give us some more informations.
do u have the correct cwm partition for the rom? that would cause you to be stuck on htc screen
greg17477 said:
perhaps he didnt wait long enough or something. the cwm version he used, is the best/stable one out there, so i doubt that would be the problem
dahunt3r, give us some more informations.
Click to expand...
Click to collapse
It might be stable but i read somewhere that certain roms wont boot using recovery below 3.2.0.5 so that cant be correct.4.0.1.4 is the latest and its also stable. But i havent seen any devs using that number recovery maybe 3.0.2.4 or 3.0.2.5 but not 3.0.0.5. just saying. if you are using an recovery than it would be perfect for a froyo rom but not gingerbread. just my opinion.
[email protected] said:
It might be stable but i read somewhere that certain roms wont boot using recovery below 3.2.0.5 so that cant be correct.4.0.1.4 is the latest and its also stable. But i havent seen any devs using that number recovery maybe 3.0.2.4 or 3.0.2.5 but not 3.0.0.5. just saying. if you are using an recovery than it would be perfect for a froyo rom but not gingerbread. just my opinion.
Click to expand...
Click to collapse
3.0.0.5 is the first one, which worked on HD2. It was supplied by RaiderX. I dont know how long your allready are on your android journey, maybe you didnt have the chance to know RaiderX and for cwm its not important if its ginger or froyo or whatever and this version works with every rom. But i am not here to tell people what version they should use or to start a fight which version is better
cheers
Related
So I really want to try out the new mashup rom, however it requires the latest version of hboot.
I have a few questions regarding hyboot.
1. What is hboot
2. Are there any advantages/improvements/differences between the newest version and the one that came stock?
3 . If I upgrade to this and find out I do not like the rom, would a nandroid back up resore the previous hyboot?
4. If a nandroid doesn't restore the previous, does cm6 work with the newest version? If not, how would I go about downgrading?
I think you mean HBOOT...
elborak said:
I think you mean HBOOT...
Click to expand...
Click to collapse
Lol, any info?
2. Nothing important.
3. No.
4. It should, but I've never run CM6.
bradm23 said:
So I really want to try out the new mashup rom, however it requires the latest version of hyboot.
I have a few questions regarding hyboot.
1. What is hyboot
2. Are there any advantages/improvements/differences between the newest version and the one that came stock?
3 . If I upgrade to this and find out I do not like the rom, would a nandroid back up resore the previous hyboot?
4. If a nandroid doesn't restore the previous, does cm6 work with the newest version? If not, how would I go about downgrading?
Click to expand...
Click to collapse
1. Bootloader.
2. none that I know of or noticed
3. No a nandroid does not change bootloader. You need a special img file to use in hboot to flash back to an older version and also need S-OFF (unrevoked forever) to do so
4. You should not have to update hboot to install any rom. The latest OTA works fine on any hboot I believe, I have hboot .79 on my phone. You don't need .92 for anything to work properly. CM6 will work fine with all hboots.
hyboot is far superior to hboot....... duh
borgey420 said:
hyboot is far superior to hboot....... duh
Click to expand...
Click to collapse
Thanks for mocking me. Incredible does rom (the cm6 mash up) needs hboot. 92 A
Adrynalyne has a ROM (Fourth Wave) that needs .92 HBOOT as well. First mock is free.
yes .92 is the latest and it rules. lol.
apparently the new kernel source is picky about hboot for some reason.
there are some differences with .92 but who cares really. if you need it for the rom/kernel you want then flash it. plus you now will have the latest.
can someone post a link for the 92. HBOOT i have been looking for it to Flash please
RYANIMOSITY said:
can someone post a link for the 92. HBOOT i have been looking for it to Flash please
Click to expand...
Click to collapse
http://adrynalyne.us/
Would I upgrade this like I would with a radio?
Installed like a radio,ended up in the reboot loop in the boot loader. Had to access clock work recovery and do a nandroid backup.
now I have the latest version without any additional problems
I also got in to an hboot loop after updating to .92. I was able to get it running again by accessing Clockworkmod and doing an advanced restore of boot from my last nandroid backup.
I guess I just can't help but tinker with these things. One day it will catch up to me I guess.
FYI, the hboot loop occurs because installing hboot wipes your kernel. Install a kernal and you'll be good to go, no nandroid required.
Sent from my DInc using XDA App
bradm23 said:
So I really want to try out the new mashup rom, however it requires the latest version of hboot.
I have a few questions regarding hyboot.
1. What is hboot
2. Are there any advantages/improvements/differences between the newest version and the one that came stock?
3 . If I upgrade to this and find out I do not like the rom, would a nandroid back up resore the previous hyboot?
4. If a nandroid doesn't restore the previous, does cm6 work with the newest version? If not, how would I go about downgrading?
Click to expand...
Click to collapse
It does NOT require the new hboot
I've proven this because I have the stock hboot
Sent from my ADR6300 using XDA App
willhill said:
FYI, the hboot loop occurs because installing hboot wipes your kernel. Install a kernal and you'll be good to go, no nandroid required.
Sent from my DInc using XDA App
Click to expand...
Click to collapse
Yeah, that didn't work for me. Flashed the new HBOOT, stuck in loop, pushed Kings #4 w/recovery, still stuck in HBOOT loop. Reflashed ROM w/o wipe, everything's back to normal.
willhill said:
FYI, the hboot loop occurs because installing hboot wipes your kernel. Install a kernal and you'll be good to go, no nandroid required.
Sent from my DInc using XDA App
Click to expand...
Click to collapse
LMFOL wish I new that yesterday. I about pooed on my self when I got the loop. It took me a few times before I could even get in to recovery. Then life was good again
Sent from my ADR6300 using XDA App
bradm23 said:
http://adrynalyne.us/
Click to expand...
Click to collapse
Thanks for the link... anyone have a hashfile to compare the download to?
The .92 HBOOT has a larger partition size than the previous versions, so yes there is an advantage to the newest bootloader. Just be advised that flashing the .92 will result in your old backups (nandroids) to no longer work. You'll have to make new backups.
Check your ROM Manager to flash 3.0.0.5 and have it show correctly.
Sent from my HTC Vision using XDA App
DAMNIT...you beat me to it lol...I was so stoked when I saw that.
No I just have to get this damn ext4
troby86 said:
Check your ROM Manager to flash 3.0.0.5 and have it show correctly.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Is this for people who have flashed ClockworkMod 3 already?
Will I see this? I have ROM Manager v3.0.0.7 w/ ClockworkMod 2.5.1.3 currently.
Sorry if this is a dumb question, I'm just a little confused.
hogg2500 said:
Is this for people who have flashed ClockworkMod 3 already?
Will I see this? I have ROM Manager v3.0.0.7 w/ ClockworkMod 2.5.1.3 currently.
Sorry if this is a dumb question, I'm just a little confused.
Click to expand...
Click to collapse
I had the same setup as you (RM v3.0.0.7/CM 2.5.1.3) and saw the update, now I have the latest ClockworkMod Recovery 3
WOOOOHOOOOOO
Now all the threads about people not being able to get it will stop!
borisimo said:
I had the same setup as you (RM v3.0.0.7/CM 2.5.1.3) and saw the update, now I have the latest ClockworkMod Recovery 3
Click to expand...
Click to collapse
Ah alright so now when I get it that should allow me to install Cyanogenmod 7 then right since clockwork 3 supports ext4? I didn't do the ENG-Hboot though. I'm assuming that could prevent me from doing any Gingerbread ROM?
hogg2500 said:
Ah alright so now when I get it that should allow me to install Cyanogenmod 7 then right since clockwork 3 supports ext4? I didn't do the ENG-Hboot though. I'm assuming that could prevent me from doing any Gingerbread ROM?
Click to expand...
Click to collapse
NOPE. That is not necessary to flash CM7. With CWM3, you are good to go.
TJBunch1228 said:
NOPE. That is not necessary to flash CM7. With CWM3, you are good to go.
Click to expand...
Click to collapse
Wonderful =D. I thought I seen that somewhere... One more queston lol. I was thinking of also GingerVillian ROM. I should be good with doing that then too?
Thank you everyone
hogg2500 said:
Wonderful =D. I thought I seen that somewhere... One more queston lol. I was thinking of also GingerVillian ROM. I should be good with doing that then too?
Thank you everyone
Click to expand...
Click to collapse
Yeah for sure. GV has most of the gingerbread source kanged from CM7 anyway, with some visual tweaks as far as I have been able to see. With CWM3, you will be good to flash any G2 ROM that is available to us.
TJBunch1228 said:
Yeah for sure. GV has most of the gingerbread source kanged from CM7 anyway, with some visual tweaks as far as I have been able to see. With CWM3, you will be good to flash any G2 ROM that is available to us.
Click to expand...
Click to collapse
Sweetness. I seen that Eng-hboot in the Cyanogenmod 7. Not really sure why?
But I did Get Root using Rage & Gfree. I have never flashed back to an older recovery though.
Is this universal now or will I still need to downgrade to get back to
cm6.1.1
loustrk said:
Is this universal now or will I still need to downgrade to get back to
cm6.1.1
Click to expand...
Click to collapse
Ganii ran a test with it said he could flash between 2.2 and 2.3 with no problems plus he was able to do nandriods of both and restore them, so sounds like it is universal for all roms 2.2 and 2.3.
Sent from my HTC Vision
Yes,seems to be no problems there.
Come from CM7 Nightly,then I did a wipe data/factory reset.
Installed now CM 6.1.1 Froyo 2.2 ROM,works.
Did a nandroid backup,works.
Then tried to restore,works too
CWM 3.0.0.5 seems to work now with 2.2 ROMs too
i was on the 2.xxx recovery in rom manager and it prompted me to flash new recovery of 3.0.0.5. so I dont think its for people who already have 3.0.0.5
I had 3.0.0.5 already and yes it did promt me to update to 3.0.0.5 because proir to this everyones recovery in rom manager said 2.5.1.3 even if they were on 3.0.0.5, so this is for everyone.
Sent from my HTC Vision
joemm said:
Ganii ran a test with it said he could flash between 2.2 and 2.3 with no problems plus he was able to do nandriods of both and restore them, so sounds like it is universal for all roms 2.2 and 2.3.
Sent from my HTC Vision
Click to expand...
Click to collapse
Thanks Joemm & Ganii, Will try after work!
Spastic909 said:
i was on the 2.xxx recovery in rom manager and it prompted me to flash new recovery of 3.0.0.5. so I dont think its for people who already have 3.0.0.5
Click to expand...
Click to collapse
Installed few days ago from here,but it`s the old one:
http://phones.crackflashers.com/vision/index.php?folder=cmVjb3Zlcmllcw==
Can`t restore 2.2 ROMs with this,so the recovery 3.0.0.5 which
you can download now via ROM Manager is newer.
Updated fine, just want to know do I have to partition my sd card
with ext 4 before I try cm7? I backed up my sd to my computer and
have cm7 and gapps downloaded and ready to go.
No,not needed.
Ganii said:
No,not needed.
Click to expand...
Click to collapse
Sweet, giving it a go now.
Hey guys I just flashed the CM glacier full 17 from the site, it was getting quirky so i thought id revert back to my old stock rom. When i reflashed with the new wer version of clockwork 3.005 it's frozen on the title screen.
I mean it dosent boot at all any suggestions? I wiped everything and tried to flash again, notta nothing. Help a guy out thanks!
heeeelp
jay4mont78 said:
Hey guys I just flashed the CM glacier full 17 from the site, it was getting quirky so i thought id revert back to my old stock rom. When i reflashed with the new wer version of clockwork 3.005 it's frozen on the title screen.
I mean it dosent boot at all any suggestions? I wiped everything and tried to flash again, notta nothing. Help a guy out thanks!
Click to expand...
Click to collapse
I reloaded the rom now im stuck in a bootloop on startup NOOOOOOOO!!!
jay4mont78 said:
I reloaded the rom now im stuck in a bootloop on startup NOOOOOOOO!!!
Click to expand...
Click to collapse
sorry guys, i got it to work again, now i dont have the android market on my phone anymore, anyway to fix this??
You're in the themes/apps section, so you won't get a whole lot of exposure for your concern. CWM 3.0.0.5 is for Gingerbread, if you are going to stock you'll need to revert to CWM 2.x.
Are you reverting to a nandroid of the stock ROM or are you downloading a fresh version? Is the Market the ONLY Google app that is not working? What about gmail or gtalk?
Sent from my HTC Glacier using XDA App
You need to Fastboot flash the old recovery. The new recovery only works with 2.3 roms not 2.2 roms
jay4mont78 said:
Hey guys I just flashed the CM glacier full 17 from the site, it was getting quirky so i thought id revert back to my old stock rom. When i reflashed with the new wer version of clockwork 3.005 it's frozen on the title screen.
I mean it dosent boot at all any suggestions? I wiped everything and tried to flash again, notta nothing. Help a guy out thanks!
Click to expand...
Click to collapse
use 3.0.0.6, from the development section, you can flash 2.2 and 2.3 roms.
You can find the google app to by instaling gapps which you will find on cyangenmod listed with the link to cm7, just flash it no wipes just drop it in and then when you reboot itll offer the option to setup market, do to some proprietary information rules or laws or whatever cm7 doesnt include it in the rom
Hey guys first i'm sorry that i've been so inactive here my girlfriend is trying to teach me to draw x3 (I take my time)
but i had to see that i'm sooo outdated i'm still using 1.4 and CWM 2.x.x.x D:!
i wanted to ask i want to flash 2.0 with recovery but i have to install the new recovery so if i install that can i then still restore backups i made with 2.x?
and if i **** the installation of the recovery is the phone then bricked?
or can i just flash it again..?
i want to update because
i ****ed the stock browser which i'm in love with
the music player turns off randomly xD lol
its slow and buggy D:
and i want to show off that i have cm7 final =3.
still restore backups i made with 2.x?
Yes you can backup in 3.x are the same as 2.x
and if i **** the installation of the recovery is the phone then bricked?
no you can just re-install recovery again
Moonystorm said:
Hey guys first i'm sorry that i've been so inactive here my girlfriend is trying to teach me to draw x3 (I take my time)
but i had to see that i'm sooo outdated i'm still using 1.4 and CWM 2.x.x.x D:!
i wanted to ask i want to flash 2.0 with recovery but i have to install the new recovery so if i install that can i then still restore backups i made with 2.x?
and if i **** the installation of the recovery is the phone then bricked?
or can i just flash it again..?
i want to update because
i ****ed the stock browser which i'm in love with
the music player turns off randomly xD lol
its slow and buggy D:
and i want to show off that i have cm7 final =3.
Click to expand...
Click to collapse
the last recovery 3.0.2.4 works with any backup i have tested myself and if you have any problem try restore in parts in advance restore. If you **** up with the recovery means you have flash it wrong but honestly there is not way to **** that up but if you want t be carefull then run
fastboot erase recovery
... and then
fastboot flash recovery recovery_xxxxxxxx
if something goes wrong wich i doubt it just reflash recovery partition .
Cheers!
Thank you very much both of you two<3
could anyone give me the link they used so i'm sure i do it right xD?
i put the images in c:/android right? and then i run fastboot and use the commands as i'm used too right? =3
Moonystorm said:
Thank you very much both of you two<3
could anyone give me the link they used so i'm sure i do it right xD?
i put the images in c:/android right? and then i run fastboot and use the commands as i'm used too right? =3
Click to expand...
Click to collapse
clockworkmod 3.0.2.4
http://www.mediafire.com/?enqve4hhgw59xhb
All this swearing
Is this a devlopment post ....nope.....please make such posts in general n help to keep the forum clean.
Sent from my GT540 using XDA App
sanmit said:
All this swearing
Is this a devlopment post ....nope.....please make such posts in general n help to keep the forum clean.
Sent from my GT540 using XDA App
Click to expand...
Click to collapse
it is a development post we are devloping Moonystorm knowledge on flash newer thing for his handset lmao
eoghan2t7 said:
it is a development post we are devloping Moonystorm knowledge on flash newer thing for his handset lmao
Click to expand...
Click to collapse
In that case its fine.....but who gets tha credit
Sent from my GT540 using XDA App
All users at XDA lmfao
Couldn't start it from Rom Manager or hardware keys at start.
I have DZ HBoot which I think is the cause.
I went back to 3.0.2.0 which still works, can someone confirm this is because of the HBoot?
read the other threads or the CWM recovery thread in the dev section. Nearly everyones having some sort of problem with the 5.x.x.x version.
5.02.0 works on my dz. i havent done much lately as kernel.org is down so no cm flashing for me. but im sure id suffer the splash screen hang as previously encountered. 3.0.2.4 is the last stable recovery..
Sent from my HTC Vision using xda premium
ptesmoke said:
5.02.0 works on my dz. i havent done much lately as kernel.org is down so no cm flashing for me. but im sure id suffer the splash screen hang as previously encountered. 3.0.2.4 is the last stable recovery..
Click to expand...
Click to collapse
I'm also using 3.0.2.4 no problem.
Sora3087 said:
Couldn't start it from Rom Manager or hardware keys at start.
I have DZ HBoot which I think is the cause.
I went back to 3.0.2.0 which still works, can someone confirm this is because of the HBoot?
Click to expand...
Click to collapse
Latest recovery works great for me. Tmobile US G2 stock hboot.
Sent from my HTC Vision using XDA App
G1ForFun said:
Latest recovery works great for me. Tmobile US G2 stock hboot.
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Give it time,stick to the latest 3.0 bla bla version,try and reboot to recovery enough times and you will get stuck at the htc screen on version 5.0.2.0
Hboot should not be an issue
everytime it hangs in the htc white screen just take the battery out and boot into bootloader and from there access recovery
cwm 5 doesn't work for me as well.
rolled back to 3
using the DZ A7275
cmw 5.0.2.0 can work good