Hi, what's the best kernel for NAND Desire HD Build?? Rafpigna 1.9OC have overclock issues. What's the best and how to install it?? THANKS!!
Overclock issues like what? I hope you don't think overclocking to 1.9 is safe, or will make your device work properly. If you overclocked to say 1.2/3 You should be okay. If you overclock to anymore than that you're bound to run into problems. If even when you overclock to 1.2/3 and you face issues, or even 1.1, then your HD2 has problems. Either way, the HD2 wasn't meant to get extreme overclocking as it even heats up when it is capped at 1ghz.
@ kailkti..
1.9 is just version number...you can overclock most to to 1536 mhz or something like that..i personally keep it at 1190..its perfectly stable..as for best kernel..two kernels stand out rafpignas and tytung..i would choose tytungs r10 or r9...
yes, 1.9 is version number. Rafpigna's kernel have the event number issue, which cause randomly high cpu usage and lags. With tytung kernel i have reboot loop at htc bootanimation. I use Stock Desire HD Rom by EFyodor.Actually with MDJ's Kernel v10.4OC but have some bugs. Any idea for get working tytung or another good kernel to try??
And at what clock speed do you experience these laggs and what not? As I said, if you experience them at 1.2ghz then your phone has a bad processor, or you need an non undervolted kernel, if it happens when you go above 1.2 ghz then it is expected to have problems since these are not "safe" speeds. If you have it even when at 1ghz then more than likely it's your phone or you again need an non undervolted kernel.
Note however i think you need to clarify on what the "laggs" and "bugs" are that you speak of. Because you have to remember, any sense rom uses up more resources, hence operating more slow than other roms, which might be the cause for your "lagg", which is experienced by anyone who uses sense.
If you are talking, saying random reboots, 1 min lagg, or so and you have not done anything or is running anything, then you might want to look for a kernel which isn't undervolted. If the same still happens, then it is your processor.
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
No problem here on tytung r10
Sent from my HTC HD2 using XDA App
Same here, tytung r10 is working great for me
Yes, tytung r10 is very good. But i can't install. I have reboot loop at htc logo. How to make it working?
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
if you were SD i'd suggest the ACA kernel. we've just about figured out the bt issues as far as i can tell now.
here at some point i'll release the updated ACA kernel for full NAND use.
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
ricky886 said:
I had try to use Kernel GL_Core v11 uv and R1.9
Kernel GL_Core v11 is better for me
I am using Boyppc desire hd v14
Click to expand...
Click to collapse
THANKS VERY MUCH!! i want to try this kernel I'm using EFP Stock Desire HD Rom. Which version of this kernel i must take??
Can you Pleae send me the link to download ACA kernel?
Sent from my HTC HD2 using XDA App
Best to try them all and work it out for yourself, happy enough with Rafpigna 1.9 personally.
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
abhi2889 said:
Please any one provide the download link of ACA kernel...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Deluxestar said:
you must download the AmeriCanAndroid Rom and extract from there the kernel.
link to the rom: click me
EDIT: But I don´t thing that this is compatible with an froyo rom.
Click to expand...
Click to collapse
It is nand capable now and yep good directions.
Ive never tried a froyo rom with it.... Go for it folks.
Sent from my HTC HD2 using XDA App
How to extract kernel from ACA build?... only zimage will be sufficient or will I require anything else??? What about the module files that I need to put in root folder???
Sent from my HTC HD2 using XDA App
abhi2889 said:
Roms with Tytung kernels face bluetooth issues... i have used many 2.3.4 roms with tytung kernals ... can any one suggest any other kernel for sd roms also? I have tried rafpigna also but in that mobile connection is not stable...
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
The best combo of kernel and rom is rafpigna 1.8 oc no sense and hyperdroid cm7 2.0.1 @ 1536mhz. It runs great and every single feature works great, as well as EDGE, 3g, bluetooth, tethering. Everything works great. This is the perfect combo. It runs great but typical os optimizations are REQUIRED to having your phone running epically fast. You will need the right nand partitions etc. I experience absolutely no issues what so ever on that combo, I'm not kidding. Everyone seems to be having issues, and I used to be one of them. Install the latest CMW 3.2.??X? and flash ur partitions correctly then install the rom from sd to nand, install 1.8 oc no sense, restart and everything is 100% perfect. I now wish I could alter the oc code of rafpigna's rom. I know it's possible to run faster. My phone doesn't run hot at all, at 1536mhz for hours and hours on end. This phone could handle 1.7-2Ghz with voltage increase, I GUARANTEE IT. It will just take time and patience.
The raf kernel still has the 60mAh bluetooth drain when used in non-sense builds. The best option for kernel is Tytung r10, until charansingh finishes work on the .37 kernel
Hello ,could you please someone explain me which kernel version is better for this ROM and work better with virtuous OC daemon.What about this kernel already include in TB Fusion3d ROM?What benefit is to use Stock HTC 2.6.35.10 + tun.ko or Lee's Kernel v3.1.6.I read somewhere that virtuous OC daemon not work with stock kernel - this one build in Seo ROM is stock or not and what is different between it and Stock HTC 2.6.35.10 + tun.ko?What mean tun.ko?
SORRY BUT I AM NEW AND HAVE TOO MANY QUESTIONS!
Thank you!
Any idea????????????????
fena78 said:
Any idea????????????????
Click to expand...
Click to collapse
The built in stock htc kernel is the best in my opinion, its stable, its fast enough said.
Hey,
im looking for some clean GB (2.3.4) ROM with CM7 & Rafpigna 1.9OC Kernel.
is there a good one? :/
or is there a way to implement the kernel into hyperdroid ?
thanks
kevin134 said:
Hey,
im looking for some clean GB (2.3.4) ROM with CM7 & Rafpigna 1.9OC Kernel.
is there a good one? :/
or is there a way to implement the kernel into hyperdroid ?
thanks
Click to expand...
Click to collapse
Hi,
Have you checked here:
http://android.hd2roms.com/
yes but theres often no kernel given :/ and the most popular builds arent not with the rafpigna kernel :/ dont know why :x
What is special about the rafpigna kernel? Just curious
I can tell you that using Rafpinga's kernel on the Hyperdroid build will force it into a bootloop and the ROM won't work. What I found that makes Rafpinga's kernel so special is on Cmylxgo's Desire HD(2) build it gave me the lowest stand by battery drains on my phone between 2-3mA. And without any peaks more than 11mA.
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
MX6Booster said:
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
Click to expand...
Click to collapse
Is that a Sense ROM? If so, the latest Incredikernel's are for AOSP GB and AOSP Froyo ROM's. He has a Sense 2.2 kernel, but Incredicontrol won't work with it (I don't think so anyways...?).
You could try tiny's kernel, which is for Sense 2.3 ROM's, but I don't think he has the included items needed for Incredicontrol to work.
RMarkwald said:
Is that a Sense ROM? If so, the latest Incredikernel's are for AOSP GB and AOSP Froyo ROM's. He has a Sense 2.2 kernel, but Incredicontrol won't work with it (I don't think so anyways...?).
You could try tiny's kernel, which is for Sense 2.3 ROM's, but I don't think he has the included items needed for Incredicontrol to work.
Click to expand...
Click to collapse
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
jlokos said:
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
Click to expand...
Click to collapse
That is correct, it doesn't. I hope to be able to release it with that function sometime after the source drops though for the gingerbread kernel.
jlokos said:
I'm using tiny's kernal for the sense rom. I believe you can use Incredicontrol to work audio boost and fast USB charge. However, tiny's kernel doesn't support voltage adjustments.
Click to expand...
Click to collapse
Thank you for the correction. I knew something worked, and something didn't.
Sent from my ADR6300 using xda premium
MX6Booster said:
I am trying to find a kernel that will work with DubShot Espresso (not ported), my goal is to be able to use IncrediControl but when I try to boot up after flashing the IncrediKernel my phone won't go past the HTC Incredible Screen. Anyone know any way around this? or if this kernel will even work with this rom?
Click to expand...
Click to collapse
you said not ported? if you meant the kernel then there is no such thing for gingerbread yet that is custom.
Sent from my ADR6300 using Tapatalk
Using Rcmix latest kernel, some comments about it would be good and looking for some suggestions about other kernels to get the best out of the rom..
Hi,
if you want to have Kernels for Sense based Roms i would recommend
RcMix Kernel 11.1 (not 12... on 12 there were some bugs reported)
Kernel can be found here:
http://forums.acsyndicate.net/showthread.php?1728-Kernel-RCMIX-3D-CIFS-NLS-OC1-9-VDD-TUN-2WCR
Otherwise check
LeeDrOiD Kernel V 4.0.0
Kernel can be found here:
http://leedroid.ftp.rshost.eu/DHD-Kernels/LeeDrOiD-Ace-GB-V4.0.0-KERNEL-2.6.35.14-CFS.zip
Greetings
I'm on rcmix 11.1 i believe...thanks though
I'd say Lordmod NCT Sense v5.0 which can be found here
https://www.dropbox.com/s/x1aluyyr6abzahz
thenocturnalnurse said:
I'd say Lordmod NCT Sense v5.0 which can be found here
https://www.dropbox.com/s/x1aluyyr6abzahz
Click to expand...
Click to collapse
ah thanks, will definitely give a try to lord's kernel
RCMix3D Kernel by klquicksall, LordMod NCT Sense Kernel, LeeDroid Kernel, Unity Kernel
Best kernel sense 3.5
The best for me is Unity v9