Database Users

can help me opal boot loodar

When I open the device In the development of
Showing three colors red, green blue...
ONBL 1.27.0000
SPL 1.27.0000
What is the solution to this problem????

Hi, the phone don't have a ROM, you must install any ROM, in this forum you find exclents ROM's for this phone
Bye

I worked the download ruu RUU_Opal_Orange_ES_1.57.75.3_infineongsm4.1.13.66_03.29.90_Ship but Show erre 294 ????

moh2183 said:
I worked the download ruu RUU_Opal_Orange_ES_1.57.75.3_infineongsm4.1.13.66_03.29.90_Ship but Show erre 294 ????
Click to expand...
Click to collapse
This mean that the file are bad downloaded, you need to download again the file or use another ROM

Download the ROM any, but first Upgrade SPL, if any question contact-me
Regwards
Nuno Rodrigues

HSPL for ROM 1.14 [stock] ? HELP ! !

Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..

Elite_ said:
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Click to expand...
Click to collapse
Here you go mate. Bottom of first post in this thread. Don't forget HSPL 1.14 is only to be used used on roms based on pre 1.56, i.e. everything before 1.56. You will need to use HSPL 1.56 for all roms based on 1.56+

Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?

Elite_ said:
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Click to expand...
Click to collapse
SPL 1.54 and a rom based on 1.56 are 2 completely different things.
What rom are you trying to flash? If its just for a stock 1.14 rom then all youi need is HSPL 1.14
There is also this dummies guide fore flashing 1.56+ roms

OMG, am sorry, didnt know about the 'unsigned' before, doing the update now, thxs /

I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help

Elite_ said:
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Click to expand...
Click to collapse
As I stated above you need to use the correct HSPL for whatever rom your using. If you want to use latest NRG rom you need to use HSPL 1.56. If your use incorrect HSPL you get colour distortions and unable to connect to make calls etc etc

Upgraded to latest hspl , and everything is fine.. Thxs//

No probs, just glad you got it sorted

Flashing Radio guide !!!!
Fallen Spartan said:
No probs, just glad you got it sorted
Click to expand...
Click to collapse
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.

Marne Jr said:
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Click to expand...
Click to collapse
It is possible to put any radio on any rom...yes. Just re-use USPL and then flash radio. A number of roms come with radio's included. If you do not want this radio, after you have flashed rom, just re-use USPL again and flash your desired radio

Important - Question

Hi Dear Guys ,
Is it possible to flash stock rom of different seriel ( Region ) with out doing bepe hspl2 , i mean if i have stock rom with asian wwe and i download eu wwe from official htc site , can i flash that stock shiped eu wwe rom on my asian wwe serial hd2 with out doing any hspl or sspl
Thanks

Wow! Really important indeed!
If you'd have taken the time to read the stickies, you would know that it's not gong to work and you'll get an 'Invalid vendor ID' error message.
Why would you not want to flash HSPL? With HSPL2 available, it's easy to revert to stock SPL and flash a stock ROM, should you need to send your device for repair or anything.

No, you'll need to use either hspl or sspl.

@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?

newstar said:
@ tomasz
i was used before kovsky that was my 1st htc brand and its much differ with black stone
Dear Guys ,
according to study , stock spl only revert back by usb method , and my second question , after hspl2 can i use official ruu (htc offcial updater) for updating custom roms ? as i think if i use it to flash i dont need task29 as offcial updater clean even binary files .. any idea ?
Click to expand...
Click to collapse
HSPL2 can also be used to revert back to stock spl. After installing hspl, the flashing is the same as got the Blackstone, ie run the RUU. Some have used the official RUU instead of the CustomRUU to flash, but I haven't tried it and I just use Task29 prior to flashing. The whole thing from Task29 to installed rom takes only 5 minutes.

@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?

You can do anything you want - HSPL2 is used to flash ALL version of HSPL and SPL

newstar said:
@ ClydeB1 Thanks
My stock HSPL is 1.66.0000
i can do any hspl2 version for me ?
Click to expand...
Click to collapse
As long as you choose one of the spl's ending in HSPL and not 0000 you can flash to any cooked or stock rom. Use HSPL2 again to return to your original spl when needed.

[Q] Pls help to install ANDROID

HELP ME .....I can't install android 2.2 in my htc hd2. I read a suggestion to please downgrade redio version to 2.12.50 and spl version to 1.42.....then run HSPL3_PKG to unlock the divice, after this go file Android and tab CLRCAD and Haret ,with in 10-15 minites every thing ok . But my radio version is 2.15.50.14 and Spl is 3.13......i can't downgrade this ...i tried sevarel cab .... every downgrade process end an error.
Pls help me, to install android ..... my rom version is 3.14.479.2 updated in 10/04/10. thanksssssss

Radio etc is fine, what's happening exactly?
Sent from my HTC HD2 using XDA App

"Spl is 3.13......i can't downgrade this"
Have you tried reflashing with the previous official rom?
i don't know if your device is Tmous or HTC HD2.
mine is the latter,i upgrade to the new rom3.14 WWE asia, spl 3.13 and later reflash with the previous official stock rom 1.66 and i got back spl 1.42.
from there i did hspl,flash radio and got android running.
try reflashing with the previous official rom then check on the spl version.once you confirmed it has been downgraded,you can do watever you want to get android running.
always read carefully if the rom you are flashing is compatible with your device.or you'll end up with a very expensive paper weight.

The 1 and only thing that is important is the radio. Seriously, forget about SPL/HSPL. The only reason people say to do anything with HSPL is because you need to have a suitable radio, and until recently there were no stock ROMs with a suitable radio. HSPL would allow you to upgrade your radio.
The radio you have is fine. It needs to be at least 2.08 (you're is 2.15) and it needs to be a 2.xx.50, not a 2.xx.51 (yours is 2.15.50).
Just follow the instructions on the Android build thread (where you download the build) and you should be able to run it with no problem.

Encfiltlog.menc
hi ,i need your help for a strange situation:i my trying to port android on my LEO i find a file call encfiltlog.menc on my sdcard where i put the android folder.it doesn't allow me to do anythig.i'm formatting and reìstalling several times but i'm having no fortune......
ps.spl 3.03.000-radio 2.15.50.14-rom dutty using SSPL-
grazie from italy

Help installing WM7 on HTC HD 2 Leo

Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran

You need to go to HTCs website and download an earlier version of the 3.14 ROM - 1.66 (HTC) or 1.72 (if it is branded). You will need to use your phone's serial number to download the ROM.
Flash the ROM. Now your SPL will be 1.66.0000
Now you can run HSPL2 and select 2.08.HSPL
Download the 2.15.50.14 RADIO (look in the WinMo6.5 ROM sectrion on here for it) and flash the RADIO.
It is now ready to start the WP7 flashing process.

Pay Attention!!!!
goran.mitrovic said:
Hello
First of all I have to tell you all that I have read almost every page on the forum and tried to follow every step but it ends up with a new thing to install. I need a guide from the beginning.
I have a swedish HTC Leo HD2 from sweden
PB81100
SPL 3.03.000
ROM-version 3.14.413.2 SWE
Radioversion 2.15.50.14
From what i can understand i need to install.
A rom from the beginning that supports 576 MB and radio.
I need to install HSPL
I need to install MAGLDR 1.11
Then i need to install MDJs_CyanogenMod7_v.2.6_NAND_A2SD+
The problems I have from the beginning is that i cant find a rom that supports 576 MB radio. And I have such a high SPL 3.03.000 so I cant install HSPL. So the bootloader MAGLDR 1.11 wont install and I am stuck.
So please guys will you help me with a little guide how I shall do this and link to the downloads I need.
Much Appreciated Goran
Click to expand...
Click to collapse
Hey you dont need to flash HSPL2, search for the HSPL3 and flash that one after following fred_up's instruction and magldr 1.11 dont work for wp7 you need to flash 1.12 before you can flash wp7 into your hd2 dont forget that is the only bootloader that works for windows phone 7 dude, be care, dont brick your phone, dont forget to hit the "Thanks Button" happy flashing

When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?

goran.mitrovic said:
When i tried to download from HTC an older ROM they say that my S/N is invalid. I dont know why. Can anyone upload the rom i need?
Click to expand...
Click to collapse
I think the stock rom should be there in the wiki