When I open the device In the development of
Showing three colors red, green blue...
ONBL 1.27.0000
SPL 1.27.0000
What is the solution to this problem????
Hi, the phone don't have a ROM, you must install any ROM, in this forum you find exclents ROM's for this phone
Bye
I worked the download ruu RUU_Opal_Orange_ES_1.57.75.3_infineongsm4.1.13.66_03.29.90_Ship but Show erre 294 ????
moh2183 said:
I worked the download ruu RUU_Opal_Orange_ES_1.57.75.3_infineongsm4.1.13.66_03.29.90_Ship but Show erre 294 ????
Click to expand...
Click to collapse
This mean that the file are bad downloaded, you need to download again the file or use another ROM
Download the ROM any, but first Upgrade SPL, if any question contact-me
Regwards
Nuno Rodrigues
Related
Anyone know how to solve the FLASh WRITE Error?!
When the progress bar reached 100%, the RUU popup said that there is a FLASH WRITE error.....
Please tell me the solution if you know
THANKS
RE : Write Error
Hello , so do you make this steps to flash the rom to the phone ?
Link : http://forum.xda-developers.com/showthread.php?t=446446
My ROM Update its work fine
Regwards
Nuno Rodrigues
Portugal
Nuno Rodrigues said:
Hello , so do you make this steps to flash the rom to the phone ?
Link : http://forum.xda-developers.com/showthread.php?t=446446
My ROM Update its work fine
Regwards
Nuno Rodrigues
Portugal
Click to expand...
Click to collapse
I flashed the HSPL v2, the problem is still here...
However, the problem just happened when I try to flash a rom prepared by my friend~~~
PDAVIET's WM6.5 v21 works fine for me
Hello, I have a bad issue with my camera's phone
The color and the quality of my pictures is very CRAP!
If anyone have an idea or had already this problems please answer me!
Have you installed a custom ROM? May be SPL ROM version mismatch. Is your screen resolution looking good?
once i have try a 6.5 wm dutty's rom , so flash 1.56 spl
and after i restore stock spl and install an HTC official ROM.
Anyone have an idea ? :/
Help please , im gonna trash my blacstone :-(
ReNaN_ said:
Help please , im gonna trash my blacstone :-(
Click to expand...
Click to collapse
Does your SPL match official rom your using? This could possibly cause your issue.
What is your SPL? what rom are you using?
im using stock spl 1.54 and a rom from HTC...
ReNaN_ said:
im using stock spl 1.54 and a rom from HTC...
Click to expand...
Click to collapse
what base is the rom using, i.e. is it 1.54 or higher? Did you use USPL or HSPL to put rom on device?
1.59.73.3_Radio_52.64.25.34_1.14.25.24
It's an .exe , then i dont know if i put my rom with USPL or HSPL
But i put my 1.54 spl with the HSPL olinex tool
Thanks ya : )
ReNaN_ said:
1.59.73.3_Radio_52.64.25.34_1.14.25.24
It's an .exe , then i dont know if i put my rom with USPL or HSPL
But i put my 1.54 spl with the HSPL olinex tool
Thanks ya : )
Click to expand...
Click to collapse
If you used HSPL then your SPL should state 1.56.Olinex. Check your SPL in bootloader. If it doesn't state this then your flash to rom hasn't been done properly so you will experience some issues, one of which could be your camera issue mentioned
but i have tried with the 1.56 olinex , and i have checked bootload and it was 1.56... whatever i do , witch rom i used , i have the same issue...
And its not an hardware issue because my front camera have the same quality...
i though it was because i use a " custom " spl but it seems not...
( Sorry for english btw. I'm french )
ReNaN_ said:
but i have tried with the 1.56 olinex , and i have checked bootload and it was 1.56... whatever i do , witch rom i used , i have the same issue...
And its not an hardware issue because my front camera have the same quality...
i though it was because i use a " custom " spl but it seems not...
( Sorry for english btw. I'm french )
Click to expand...
Click to collapse
If your experiences this on all roms it does sound more like a hardware issue. Front camera has a low resolution compared to the main camera which is supposedly 5MP.
I would be inclined to leave it in for warranty repair unless someone else has a solution. Remember to restore stock SPL & rom before returning device
Okay , thanks for all sir : )
Im gonna do this
i have the same problem with the camera of touch hd, anyone can help me to fix this???
Same probleme on a friend's Touch HD on Both cameras.
Does Anyone have an issue?
the phone was never flash.
Rom : 1.56.406.1
radio : 1.13.25.24
Hello , yesterday i instaled Keyboard for HTC , so my HTC crashed
So i resolved Hard Reset
If have questions so contact-me
Regwards
Nuno Rodrigues
spl is crased
incase my spl is crased, then what i should do? plsssssssssss help me
hiya nuno!!!
sorry i am changing the topic but i wanted to notify you that the pdaviet rom v24 which you uploaded on mediafire is corrupted. i dl twice with the same problem.
hiya nuno!!!
sorry i am changing the topic but i wanted to notify you that the pdaviet rom v24 which you uploaded on mediafire is corrupted. i dl twice with the same problem.
WM 6.5 {1.27.707.24 - B23053COM3 -D092009}
Click to expand...
Click to collapse
incase my spl is crased, then what i should do? plsssssssssss help me
Click to expand...
Click to collapse
Sorry , so you make hard reset
Regwards
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Elite_ said:
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Click to expand...
Click to collapse
Here you go mate. Bottom of first post in this thread. Don't forget HSPL 1.14 is only to be used used on roms based on pre 1.56, i.e. everything before 1.56. You will need to use HSPL 1.56 for all roms based on 1.56+
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Elite_ said:
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Click to expand...
Click to collapse
SPL 1.54 and a rom based on 1.56 are 2 completely different things.
What rom are you trying to flash? If its just for a stock 1.14 rom then all youi need is HSPL 1.14
There is also this dummies guide fore flashing 1.56+ roms
OMG, am sorry, didnt know about the 'unsigned' before, doing the update now, thxs /
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Elite_ said:
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Click to expand...
Click to collapse
As I stated above you need to use the correct HSPL for whatever rom your using. If you want to use latest NRG rom you need to use HSPL 1.56. If your use incorrect HSPL you get colour distortions and unable to connect to make calls etc etc
Upgraded to latest hspl , and everything is fine.. Thxs//
No probs, just glad you got it sorted
Flashing Radio guide !!!!
Fallen Spartan said:
No probs, just glad you got it sorted
Click to expand...
Click to collapse
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Marne Jr said:
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Click to expand...
Click to collapse
It is possible to put any radio on any rom...yes. Just re-use USPL and then flash radio. A number of roms come with radio's included. If you do not want this radio, after you have flashed rom, just re-use USPL again and flash your desired radio
hi all,
i have htc touch P3452
WM6
CE OS 5.5.1620
ROM VERSION:2.20.720.2B WWE
- -
- -
I DONT KNOW EXACT TECHNICAL TERMS TO USE BUT I WANT MY HTC TO UPGRADE TOTALLY WITH NEW NICE LOOKS AND PERFORMANCE IMPROVEMENT.I WANT LATEST OS ROM N ALL THAT CAN BE DONE. I READ THE THREAD AND SUCCEFULLY DONE FOLLOWING:
1.SIM UNLOCK
2. CID UNLOCK PROVIDED BY POF FOR ELFIN(SUCCESS)
NOW GUIDE ME AFTER THIS AND PROVIDE ME LINKS(CAN I UPGRADE TO ANDROID OR WINDOWS 7 OR ANY OTHER THING WHICH MAKE MY DEVICE LATEST??)
KINDLY HELP
NILANSH
pls reply guys..... admin users its a request....
Hi
First use device id http://forum.xda-developers.com/showthread.php?t=418892 and post yours here.
Only after this we'll proceed to 2nd step Hard Spl then 3rd Flash a cooked Rom
boss i sim unlocked it, cid unlocked it and run the rom update utility also ...now jus flashing needs to be done... i have elfin WM6 .. can i flash WM6.5/WM7 or android or any othe gud rom?
You can flash from here http://forum.xda-developers.com/showthread.php?t=426540 , make sure you read and understand the faq.
Android and Wp7 are not for our devices...
@tito u mean that WM6 elfin can't be flashed to WM7/android? right?
so what else could it be flashed to (latest & nice looking) .... WM6 to WM6.5??
You can flash 6.1, 6.5, I'd advise the 1st for Elfs and the 2nd for Elfins...
@tito ..m totally confused.. do me a favour... just give me a link and i will flash that ROM only provided by you..... sorry to trouble you...
HTC Touch device information - by dsixda
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 2.20.0002
SPL : 2.20.0000pof (USPL)
ROM Version : 2.20.720.2
ExtROM Version : 2.20.720.103
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0100
Part Number : 99HEH013-00
SIM Unlock Code : 71110343
---------- Post added at 05:09 PM ---------- Previous post was at 04:50 PM ----------
@titu & other members.. above post is my device info...suggest a good rom to flash on it,,,, provide link..
thanks in advance
Ok
First install USPL 3.10 and IPL 3.10 from http://forum.xda-developers.com/showthread.php?t=408637 (but read all the posts before). Then proceed to HSPL 3.10 from here http://forum.xda-developers.com/showthread.php?t=445666.
Once it's done you can flash the rom in my sig ( link posted a few posts above)
Good luck
what will upl uspl & HSPL will do?? i had already CID unlocked my device... do i need to install it... or directly flash the ROM?? how to flash .nbh file??
If you read the faq from Onyx rom, you'd have seen the best cid is 3.10 for best performance.
Hard spl gives extra protection in case of bad rom, you'll never worry about bricking your device.
You need a RUU (rom update utility) to flash anything, just go to Aman uspl thread, one of the uspl has ruu (search for the Uspl 2.28 i think) and replace the nbh file with the 3.10 one.
Onyx rom has ruu already.
Good luck.
ok tito i will try this today eve and if i found any problem ..i will ask you...sorry sir
tito...how to replace .nbh file?? i downloaded ipl/uspl 2.28 and replaced .nbh file with ipl/uspl 3.10 and flashed it but its showninh spl 2.28 after the flashing...please explain again
---------- Post added at 04:49 PM ---------- Previous post was at 03:52 PM ----------
uspl/ipl 3.10 both have only .nbh file ... i have a folder uspl 2.28 zip file but when i replace the .nbh file with 3.10 one it flashes uspl/ipl 2.28 only....
plsss reply .. i am waiting................
remove the 2.28 nbh: in ruu there should be only one nbh.
@ tito..thanks bro... i updated my rom to WM6.5 onyx successfully.....
but i could not find "program" section... also no games can be seen..is it so??
and its not so cool.... i was wishing that might be its very cool interface like samsung's or iphone's interface coming now adays..any way to get cool interface..
Try iphonetoday http://forum.xda-developers.com/showthread.php?t=633618&highlight=Iphonetoday
as per above discussion i successfully upgraded my OS to WM6.5 ..it was working fine..... but as i was out on a tour i couldn't able to charge its battery and it was kept for 4 days without charging battery..but now when i plug in the charger ..its not charging(no idication light even) ..its getting hot but not able to charge ....what is this issue????