Hi all. I looked at several wi-fi posts on here, but couldn't find anything related to my problem.
I'm beginning to suspect that it's because of something stupid I'm doing, cos it really should be working...
Anyhoo ...I have a wireless router at home, and it's serving 3 PCs with DHCP IP addresses, and an internet connection. I have no issues with it.
What I'm trying to do now is get my shiny new XDAIIi to connect, so that I can have the damn thing on the internet. So far, no luck.
Now, I have got the XDA to detect my SSID. It detects all the settings, and tells me it's connected. I even have a signal strength bar on it which reads about 50%.
However, when I set it to pick up a DHCP address it stubbornly refuses, remaining with a "I can't see a DHCP server" 169.x.x.x address.
I've tried reserving an address on the router and allocating it to the MAC address of the XDA, and manually setting the XDA to have that IP address, entering my router as the gateway, and even entering 2 valid DNS server IPs from my ISP into the name server entries. Still nothing. It says it's connected with the IP address I allocated, but I have no net connection, and I can't ping that address from any of my PCs.
All the while the status screen on the router tells me that the device, with it's MAC address, is connected to the router fine.
Surely this has to be something simple. I have set up all the clients and router for my network, and the settings on the XDA are pertty much the same, and really SHOULD be working.
I'm kinda at my wits end.
So basically any suggestions or advice, or anyone with similar experiences please get in touch, cos I'm struggling to see what I've done wrong, and it's giving me an ulcer.
Many thanks in advance.
Jess
3COM WAP (3CRWE454G72) - XDA IIi WIFI Problems
Hi Jess,
I very much share your frustration.
I have a 3COM WAP (3CRWE454G72) which has served me well. I have a few machines at home working from it. At work we have 20+ machines working from the same model (older firmware).
My specs are as follow:
3C number 3CRWE454G72
Software version 1.03.07A
Boot loader version 1.00.00
Wireless version V1.0.2.1
Hardware version R01A
Don't have the office one's specs here at the moment ...
At work I can get an IP address (there's a windows DHCP server) .. AND I can ping google and traceroute to google. BUT, XDA IIi doesn't seem "know" that it's connected (e.g. network settings shows the WAP as available, but not connected). SKYPE even works!! But nothing else, no IE, no Terminal Services Client, no Avant Go, no network ActiveSync. They all say that the is no network card configured (but with vxUTIL, vxIPCONFIG, etc). I can see ALL the IP details from the DHCP server.
At home it's worse. I can't even get it to connect to the WAP (either with WEP 128, WEP 64 or encryption turned off). As I'm not even getting an IP address at home from the WAP's DHCP server, I've built a new DHCP server on my one linux box and it works for all my machines ... now I can actually trace requests from devices for IP's ... and the XDA IIi never requests an IP address. Which tells me that it's not even getting through the first stages of connecting with the WAP (again tried WEP, NO WEP).
To make things worse. I have been able to connect to some open WAP's in the neighbourhood ... everything functioning normal.
I'm losing the will to live here also ... ;-)
Wolfie
the plot thickens...
Hi Wolfie.
Well, at this end I seem to have more news.
By removing all WEP encryption and removing the MAC address access restriction I had enabled, I got the XDAIIi online, and all was working.
I then enabled the security a step at a time, and at each step updated the configuration on the handheld, and it still all worked. I was so pleased.
)
However this morning I have come to put the thing online again, and once again it refuses to pick up a DHCP address.
I tried my process again, and this time it wont work.
It definitely seems that it's the encryption that's stopping it, but I can't get it working this morning.
When I disabled everything I managed to get it online, but then re-enabling the security killed it and I can't get it to come online again.
SIGH
Oh well, I will try again later. Fussy thing. Anyone ever manage to solve this ??
Jess
have u tried soft reseting the device and retrying, sometimes that cures these hiccups
rgds
jim
WIFI WOES
Jess, thanks for the reply. There's hope. ;-)
I have tried your approach yesterday. However, to no avail. At home I completely opened my WAP, e.g. any MAC, no WEP/WPA, etc. But still nothing. When I look at my log files on the WAP. I can see plenty of entries coming from my XDA IIi ...
04 min(s) 41 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 43 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 45 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 46 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 48 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 50 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
... and it just goes on and on and on .... while trying to connect.
At the same time in all connections attemps, I don't get a single entry in my DHCP servers log saying that my XDA II attempted to connect.
Jim: I've tried hard resets, soft resets, O2 Active installed, Corporate mode, pretty much everything my single brain-cell can come up with. ;-)
The thing is definitely a little fiddly indeed ...
The search goes on ...
... anybody out there got their XDA IIi working with WIFI using DHCP and WEP or WPA?
Did you ever get this working?
I have a shiny new XDAIIi and have been trying to get connected via my Cisco Aironet 1200 WAP. The device happily detects my network, accepts the WEP key fine (complains if I enter the wrong key so I know it's communicating) but refuses to pick up an IP address. The Wireless LAN Manager just sits there "Scanning network..."
I firmly belive I'm just missing something but...........
Any help gratefully received :?
bump
I got my QTek 2020i today and for the life of me I can't get it to connect to the internet using my wifi connection @ home
I also have a 3COM router 3CRWE754G72-A and I have my home pc connected to this and also occassionally my work PC - both with no probs.
I can get the qtek to connect and I get a 50% signal strength and I can view an IP address and everything looks good but I can't seem to setup a "Connection" as required by IE?
This is what I get:
"Cannot connect with current connection settings. To change your connection settings, tap Settins"
I tap settings and I get this:
My ISP
Add a new modem connection
My ISP
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
I've gone into each of these and had a "play" but I still can't get the bloody thing to work :evil:
Can someone PLEASE help as this is starting to drive me mad! - I'm not giving up easily...I've been trying to get this to work for a good 4 hours now and I can't find anything in the manual or on the web that helps...this post was the closest I could fine >>> hence the bump!
Cheers
Wayne
have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?
guoper said:
have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?
Click to expand...
Click to collapse
Okay, I can get the connection to read "connected" via the Wireless Lan Manager and I can get an IP address - which is totally different to all the other PC's that use my wifi connection - they're all 192.168.1.x whereas this is very different? - the address that I get isn't even the same as the IP Address of my router - I have a static IP address so I know this isn't changing???
Also, when I view the network card page I see the following:
Configure Wireless Networks
Add New...
3Com Available
I can click on this and view the settings for it or I can hold-click and get the option of connecting. If I do this, it just says "connecting"; it never actually says "connected"?
Anyone know where I can get a walkthrough for this?
Cheers
Wayne
3 Com Routers
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy
Re: 3 Com Routers
MacPad said:
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy
Click to expand...
Click to collapse
Hi Paddy
Thanks for the info. You're bang on with the IP Address!...169.254.x.x
So what encryption can I use?
I've deffinately got the correct password but it's obviously not working
Cheers
Wayne
Hi again
Okay, I've just checked the encryption and I'm using WPA-PSK authentication with TKIP encryption.
Is this what you had?
Cheers
Wayne
3 Com Routers
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy
Re: 3 Com Routers
MacPad said:
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy
Click to expand...
Click to collapse
Okay, I've basically removed all security from my wifi setup. I live in the middle of nowhere so it's not a problem - although once I get the wifi working I'll try and get the security going again.
I still can't get a connection
...stop the press!
Okay, I had a thought...maybe I can't connect because of the speed?
the router is a 11g but supports 11b (which is what the QTek 2020i/XDA IIuses) - sure enough, I had the 11g only option selected - DOH!
removed that and I've managed to connect without security.
I assume this was my problem all along...will now stick the security back on and try again
Thanks again Paddy
Cheers
Wayne
Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne
DotN said:
Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne
Click to expand...
Click to collapse
Doh!...nope, not working again...back to the 169.254.x.x problem.
It's obviously to do with the encryption this time. I'll try some other variations - at least I know that it can work :roll:
Cheers
Wayne
Ouch......
No hard feeling, glad you found the problem
Paddy
bump!
pretty much same prob!
i can get an ip, have to check what it is, it tells me its connected on the scanning network page but on the other bit it tells me its available or connecting but never connects!
i've turned wep off and still no joy!
its really starting to drive me mad!
please please someone help
Take a read back through the last lot of posts between myself and MacPad - I think you'll find the answer there.
For me, I had to totally disable my security and everything else - I could then connect. Once I'd done that, I managed to use WEP with a 26 digit key - start by using something like "0" 26 times...make sure u count as u type them zero's in though as if u get it wrong it won't work!
apart from that, not sure what to say. If you're getting the 164.x.x.x ip address though then as MacPad said, it's to do with the security.
I would mention that the XDAIIi/Qtek 2020ii use 11mbps wifi (b) and not 54mbps (g) so make sure u've got ya router configured to allow both types of connection...this eventually turned out to be my main problem - doh!
Cheers
Wayne
ok now im home ive re-read and done the things mentioned. with a completely unsecure connection i can get a connecation, but the moment i use any kind of encryption (im using wep 64bit, but tried 128bit as well) no matter what key i use i get a split second of connection then its gone!
firewall is not on either.
any ideas??
thank for the suggestions guys im finally progressing
I work in IT and often need to conect to customer sites to resolve issues.
Many of our custoemrs allow me to have VPN access in.
This works a dream from XP PRO.
However I thought I would try and access 2 customers via VPN over WIFI from my MDA PRO which I have just upgraded to the latest T-mobile UK ROM.
I created my 2 connections both use PPTP.
I then tried to connect one of them , holding the stylus over the connection I wanted and selecting connect.
Nothing seems to happen.
Rebooted
tried again the same.
Disabled WIFI and tried over the usb connection and activesysnc, nothing.
How do you know when you are connected.
I removed the password info and tried to connect again.
Exepecting to be prompted for password.
nothing appears on the screen.
no error messages, I would expect to see conenction failed, or a disconnect option once you connect.
Am I missing something.???
I dont think your missing a thing, ive tried it before and never got it working through any connection method. bag of pap as they say
VPN only seems to work over t-mobile 3g not wifi
I can conenct via 3g but not wifi
Seems to be a device limitation
Update
I understand from T Mobile UK this is a problem that their UK partners cannot fix so they have passed it onto T Mobile in Germany who will raise it with their suppliers.
There is no promise of a fix or any idea of timescale
This works fine for me:
1.Set up VPN Connection in connection settings for th server you wish to use
2. - most important - in the advanced tab relating to above under Exceptions you need to enter the IP address of the computer you are trying to connect to
3. Go to Terminal services in Programs and enter the IP address of the cf the computer yo wish to connect to - and press Connect
Hopefully that may work for you
johntheo
What am I missing? Where can you obtain the updated rom from? I cannot find it on the T-Mobile site.
Gareth
Over the last year I have tried many times to set up my Windows Mobile devices to connect over VPN and then use RDP to manage my clients' sites. To date I have never managed to get it to work. My config is as follows :-
Within Start \ Settings \Connections \ Advanced \ Select Networks
Programs that automatically connect to the Internet use MY ISP
Programs that automatically connect to a private network "My Work Network"
a VPN is configured under "My work network" and the device can connect to this and using vxutil I can ping the server I wish to RDP to - 172.17.3.3
Supposedly the important bit is to add the exception under "Work URL exceptions", I have added 172.17.3.3 in here.
Once the VPN is established if I enter 172.17.3.3 within IE or Terminal Services CLient the VPN connection is still dropped.
If I enter this IP address without connecting the VPN first then the device will not connect the VPN automatically.
If I enter a non qualified domain name such as ids-vs then the VPN is connected but the name is never resolved.
Can anyone shed any light on this, if I could use a local lmhosts file on the device as with XP then I may be able to work around the above. It appears to me though as though the exceptions list is never processed. I did a hard reset last night just in case, but this has made no difference.
I cannot believe that the above can be so complex.
I am using a HTC Tytn and using t-Mobile in the UK.
Any help greatly appreciated since it is driving me totally mad!
I would love to figure that out.
I was trying to connect to my pc at home like this and suffered from all the same symptoms your having. In the end I gave up, mainly 'cause someone told me that I needed another type of data plan to have vpn (at the time I had the $29.99USD plan) in other words it might be your plan, or something to do with the proxies or something, I hope someone would find out what you need to do in order to get this to work.
It's strange, looking around the web there are loads of people that struggle with the setup, but most seem happy once they are told to add the server name or IP address in the exceptions list.
I have ruled out the data plan since I can establish the VPN connection and can see it authenticate on the other end, as well as being able to ping the server on the work network from the phone.
I have just opened a support call with Microsoft as well, but I am not holding out much hope since I think they will point me at HTC. Assuming HTC ever responded they will just point me back at Microsoft!
Well it would be cool if they could help you, I tried everything myself and zilch. I could also establish a connection but as soon as I would try to access a file on my pc it would disconnect. I would try to help you out experimenting on my side again, but I changed my router to a cheap piece of $h.. and now I can't access my pc via vpn..... I really need to get a decent router
This may sound stupid, but I could swear someone told me something about the speed of the connection. If the connection speed is too low then DNS would fail, although that wouldn't explain why we are able to establish a connection, but not access anything else.
OK, I have made quite a bit of progress :-
1) I was using a cab file to configure T Mobile settings on the phone. This was somehow configuring the exceptions list to be ignored. Hard resetting the phone, installing this CAB the problem remained. Hard Resetting the phone and setting up GPRS manually - everything worked.
2) There is a fault with Windows CE 5 routing over VPN - the subnet information is ignored. Hence for example, if your GPRS provider give you a NAT 10.x.x.x ip address and your corporate network uses 10.x.x.x then you can never route to your corporate network.
And what cab file is that? do you know if it's on the extended roms for the t-mo roms? Glad to see your making progress, keep it up.
It was a Cab file for the Tmobile settings. It either came from these forums or over at modaco, can't remember which.
VPN
I was able to successfully use the Movian VPN to connect to my work using my XDA2.Worked fine for 2 years. Apologies, but I can't help with the settings and my work migrated to an M-notes server so I was able to connect without a VPN.
Having looked through the forums i'm not alone in this problem?,i have always been able to connect to the internet through my home wireless network and veiw wap sites while out & about, until yesterday i can now no longer connect to my network? All i have done is to configure it so as to be able to browse the web via gprs via a remote server as shown in a thread on this site. That worked a treat but now no wireless access, just keeps connecting but not able to connect. tried various fixes as stated in numerous threads, no joy. put it back to original config still the same. as far as i (novice) can tell it can't get a ip address of my linksys WRK54G router. haven't touched that so doubt if that is at fault. All other laptops in house still able to connect? DOH Any advice would be appreciated. Going to check on brothers network if it can connect? will let you know.
It would help if you post links to whatever advice you followed to change settings, so we would know exactly what you were trying to do.
On a side note we have a linksys router at work (fortunately not on the main network) and sometimes it refuses to let my Jamin connect for no reason until I reset it. (Pulling the power supply does the trick)
I know it is not much of a solution, but worth a shot (router configuration will not be effected) specially if you manage to connect to your brothers network.
Sorry here is link, http://forum.xda-developers.com/showthread.php?t=269023&highlight=T-Mobile+GPRS.
Also had error message appearing about ip address not being assigned, after/during activesync? fixed this. Could it be related?.
When connecting to network all details show correct in the WiFi settings page, but in the advanced tab ip is 0.0.0.0 and status assigned to network. If i tap renew nothing happens?. Hope this helps tia
Guess you would like to no how i fixed the other problem, "http://groups.google.co.uk/group/microsoft.public.pocketpc/browse_thread/thread/d6df3cc438b9ca5f/8bd321e9d0200967%238bd321e9d0200967?sa=X&oi=groupsr&start=0&num=3"
Have got it working, tried powering down wireless router - no change, thought about a hard reset, not today thanks, tried a soft reset, bingo! it works. swear i had already tried that??, thanks for help great forum.
Oops Must have been a hiccup, was still unable to surf web through WiFi, managed it once then kept getting message unable to connect, check connections. Finally sorted it.
Set up internet connection through my ISP using o2 payandgo details, but with out proxy server info. Kept gprs settings the same in My Work Network.Seems ok after a couple of minutes testing.
If anyone needs the exact settings send me a message and I will post them.
For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.
If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.
Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!
Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!