Database Users

XDAIIi wi-fi problem

Hi all. I looked at several wi-fi posts on here, but couldn't find anything related to my problem.
I'm beginning to suspect that it's because of something stupid I'm doing, cos it really should be working...
Anyhoo ...I have a wireless router at home, and it's serving 3 PCs with DHCP IP addresses, and an internet connection. I have no issues with it.
What I'm trying to do now is get my shiny new XDAIIi to connect, so that I can have the damn thing on the internet. So far, no luck.
Now, I have got the XDA to detect my SSID. It detects all the settings, and tells me it's connected. I even have a signal strength bar on it which reads about 50%.
However, when I set it to pick up a DHCP address it stubbornly refuses, remaining with a "I can't see a DHCP server" 169.x.x.x address.
I've tried reserving an address on the router and allocating it to the MAC address of the XDA, and manually setting the XDA to have that IP address, entering my router as the gateway, and even entering 2 valid DNS server IPs from my ISP into the name server entries. Still nothing. It says it's connected with the IP address I allocated, but I have no net connection, and I can't ping that address from any of my PCs.
All the while the status screen on the router tells me that the device, with it's MAC address, is connected to the router fine.
Surely this has to be something simple. I have set up all the clients and router for my network, and the settings on the XDA are pertty much the same, and really SHOULD be working.
I'm kinda at my wits end.
So basically any suggestions or advice, or anyone with similar experiences please get in touch, cos I'm struggling to see what I've done wrong, and it's giving me an ulcer.
Many thanks in advance.
Jess

3COM WAP (3CRWE454G72) - XDA IIi WIFI Problems
Hi Jess,
I very much share your frustration.
I have a 3COM WAP (3CRWE454G72) which has served me well. I have a few machines at home working from it. At work we have 20+ machines working from the same model (older firmware).
My specs are as follow:
3C number 3CRWE454G72
Software version 1.03.07A
Boot loader version 1.00.00
Wireless version V1.0.2.1
Hardware version R01A
Don't have the office one's specs here at the moment ...
At work I can get an IP address (there's a windows DHCP server) .. AND I can ping google and traceroute to google. BUT, XDA IIi doesn't seem "know" that it's connected (e.g. network settings shows the WAP as available, but not connected). SKYPE even works!! But nothing else, no IE, no Terminal Services Client, no Avant Go, no network ActiveSync. They all say that the is no network card configured (but with vxUTIL, vxIPCONFIG, etc). I can see ALL the IP details from the DHCP server.
At home it's worse. I can't even get it to connect to the WAP (either with WEP 128, WEP 64 or encryption turned off). As I'm not even getting an IP address at home from the WAP's DHCP server, I've built a new DHCP server on my one linux box and it works for all my machines ... now I can actually trace requests from devices for IP's ... and the XDA IIi never requests an IP address. Which tells me that it's not even getting through the first stages of connecting with the WAP (again tried WEP, NO WEP).
To make things worse. I have been able to connect to some open WAP's in the neighbourhood ... everything functioning normal.
I'm losing the will to live here also ... ;-)
Wolfie

the plot thickens...
Hi Wolfie.
Well, at this end I seem to have more news.
By removing all WEP encryption and removing the MAC address access restriction I had enabled, I got the XDAIIi online, and all was working.
I then enabled the security a step at a time, and at each step updated the configuration on the handheld, and it still all worked. I was so pleased.
)
However this morning I have come to put the thing online again, and once again it refuses to pick up a DHCP address.
I tried my process again, and this time it wont work.
It definitely seems that it's the encryption that's stopping it, but I can't get it working this morning.
When I disabled everything I managed to get it online, but then re-enabling the security killed it and I can't get it to come online again.
SIGH
Oh well, I will try again later. Fussy thing. Anyone ever manage to solve this ??
Jess

have u tried soft reseting the device and retrying, sometimes that cures these hiccups
rgds
jim

WIFI WOES
Jess, thanks for the reply. There's hope. ;-)
I have tried your approach yesterday. However, to no avail. At home I completely opened my WAP, e.g. any MAC, no WEP/WPA, etc. But still nothing. When I look at my log files on the WAP. I can see plenty of entries coming from my XDA IIi ...
04 min(s) 41 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 43 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 45 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 46 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 48 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
04 min(s) 50 sec(s) after system power on : Wireless MAC address 00:09:2D:14:C9:F2 has connected with the device
... and it just goes on and on and on .... while trying to connect.
At the same time in all connections attemps, I don't get a single entry in my DHCP servers log saying that my XDA II attempted to connect.
Jim: I've tried hard resets, soft resets, O2 Active installed, Corporate mode, pretty much everything my single brain-cell can come up with. ;-)
The thing is definitely a little fiddly indeed ...
The search goes on ...
... anybody out there got their XDA IIi working with WIFI using DHCP and WEP or WPA?

Did you ever get this working?
I have a shiny new XDAIIi and have been trying to get connected via my Cisco Aironet 1200 WAP. The device happily detects my network, accepts the WEP key fine (complains if I enter the wrong key so I know it's communicating) but refuses to pick up an IP address. The Wireless LAN Manager just sits there "Scanning network..."
I firmly belive I'm just missing something but...........
Any help gratefully received :?

bump
I got my QTek 2020i today and for the life of me I can't get it to connect to the internet using my wifi connection @ home
I also have a 3COM router 3CRWE754G72-A and I have my home pc connected to this and also occassionally my work PC - both with no probs.
I can get the qtek to connect and I get a 50% signal strength and I can view an IP address and everything looks good but I can't seem to setup a "Connection" as required by IE?
This is what I get:
"Cannot connect with current connection settings. To change your connection settings, tap Settins"
I tap settings and I get this:
My ISP
Add a new modem connection
My ISP
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
I've gone into each of these and had a "play" but I still can't get the bloody thing to work :evil:
Can someone PLEASE help as this is starting to drive me mad! - I'm not giving up easily...I've been trying to get this to work for a good 4 hours now and I can't find anything in the manual or on the web that helps...this post was the closest I could fine >>> hence the bump!
Cheers
Wayne

have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?

guoper said:
have you try to configure the network cards in the connection setting and set the internet using the tiacxwln Compatible Wireless Ethernet?
Click to expand...
Click to collapse
Okay, I can get the connection to read "connected" via the Wireless Lan Manager and I can get an IP address - which is totally different to all the other PC's that use my wifi connection - they're all 192.168.1.x whereas this is very different? - the address that I get isn't even the same as the IP Address of my router - I have a static IP address so I know this isn't changing???
Also, when I view the network card page I see the following:
Configure Wireless Networks
Add New...
3Com Available
I can click on this and view the settings for it or I can hold-click and get the option of connecting. If I do this, it just says "connecting"; it never actually says "connected"?
Anyone know where I can get a walkthrough for this?
Cheers
Wayne

3 Com Routers
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy

Re: 3 Com Routers
MacPad said:
Hi, DotN
I put a 3Com router in my local pub.
I have no problem connecting to it and solving the usual pub talk problems with it.
If you are getting a connection but your IP address starts with 169.254 then I would say you have a WEP problem. The software only appears to check for incorrectly formatted WEP keys, so either turn it off or make sure you enter the correct key. When selecting connect to a router the message sticks on connecting, come out of the screen and go back in after about 30 secs. Check you ip address. I have had some issues with GRPS trying to connect, but they seem to go away after a couple of hides.
I have to say that I am not over the moon with my XDA2i, but the wifi part has worked pretty well for me.
Laters
Paddy
Click to expand...
Click to collapse
Hi Paddy
Thanks for the info. You're bang on with the IP Address!...169.254.x.x
So what encryption can I use?
I've deffinately got the correct password but it's obviously not working
Cheers
Wayne

Hi again
Okay, I've just checked the encryption and I'm using WPA-PSK authentication with TKIP encryption.
Is this what you had?
Cheers
Wayne

3 Com Routers
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy

Re: 3 Com Routers
MacPad said:
Are you using a password or 13 Hex pairs, I use the pairs. Try either turning wep of completely or entering 26 1s. Remove your setting for your ap in Configure Wireless Networks screen then reconnect.
Let me know what happens
Paddy
Click to expand...
Click to collapse
Okay, I've basically removed all security from my wifi setup. I live in the middle of nowhere so it's not a problem - although once I get the wifi working I'll try and get the security going again.
I still can't get a connection
...stop the press!
Okay, I had a thought...maybe I can't connect because of the speed?
the router is a 11g but supports 11b (which is what the QTek 2020i/XDA IIuses) - sure enough, I had the 11g only option selected - DOH!
removed that and I've managed to connect without security.
I assume this was my problem all along...will now stick the security back on and try again
Thanks again Paddy
Cheers
Wayne

Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne

DotN said:
Update: I've now managed to get the wifi working with WPA-SPK authentication using TKIP encryption
all along it was simply a case of me having the speed on the router set above what the PDA was capable of! I'd set this ages ago when I first setup my wlan and had forgotten about it cause everything I use is 11g
Cheers again
Wayne
Click to expand...
Click to collapse
Doh!...nope, not working again...back to the 169.254.x.x problem.
It's obviously to do with the encryption this time. I'll try some other variations - at least I know that it can work :roll:
Cheers
Wayne

Ouch......
No hard feeling, glad you found the problem
Paddy

bump!
pretty much same prob!
i can get an ip, have to check what it is, it tells me its connected on the scanning network page but on the other bit it tells me its available or connecting but never connects!
i've turned wep off and still no joy!
its really starting to drive me mad!
please please someone help

Take a read back through the last lot of posts between myself and MacPad - I think you'll find the answer there.
For me, I had to totally disable my security and everything else - I could then connect. Once I'd done that, I managed to use WEP with a 26 digit key - start by using something like "0" 26 times...make sure u count as u type them zero's in though as if u get it wrong it won't work!
apart from that, not sure what to say. If you're getting the 164.x.x.x ip address though then as MacPad said, it's to do with the security.
I would mention that the XDAIIi/Qtek 2020ii use 11mbps wifi (b) and not 54mbps (g) so make sure u've got ya router configured to allow both types of connection...this eventually turned out to be my main problem - doh!
Cheers
Wayne

ok now im home ive re-read and done the things mentioned. with a completely unsecure connection i can get a connecation, but the moment i use any kind of encryption (im using wep 64bit, but tried 128bit as well) no matter what key i use i get a split second of connection then its gone!
firewall is not on either.
any ideas??
thank for the suggestions guys im finally progressing

i mate k-jam WIFI problem?

the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.

HELP ME
Someone can help me?!

Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.

tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris

I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?

Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!

got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is

gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy

Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.

an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy

Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:

an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy

Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy

Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim

cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers

tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.

New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.

If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me

Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469

@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]

WiFi and GPRS

For some reason I can connect to the internet very easily through GPRS (even when roaming), but at home with my own wirelss LAN, I can connect with no problem, but each time I try to access anything on the internet, I get a pop-up stating "Could not locate remote server". I don't have a router, I am using a desktop as the gateway, I am currently accessing the net with my laptop through the same means. All configurations for the LAN appear to be correct, but I must be missing something on the JAMin. In the WiFi settings, I see the LAN, almost full signal - Ad hoc Mode - status is connected - I'm assigned an IP ... seems like everything is in order.
Will one of you wizards point out what I've missed? I know it's probably simple, usually is.

If I'm having trouble connecting a device to a network that has previously been working ok, the first that I do is turn off all network security i.e WEP, MAC address filtering etc. Then reboot the wireless access point/router and your device. If you still can't connect, you can start to blame your device.

Don't think it's a network prob...
Thanks Matterhorn, but my laptop is still connected fine, no problems there... I get the feeling that the PPC's only recognising the GPRS as a valid network for internet access... it works okay when I login to a commercial WiFi network (when I'm in the States) but for some reason on my own network here at home, it logs in, just can't find a server for some reason. The first thing I thought of was the firewall, turned it off and still no luck.
Any other ideas? I thought maybe there was a setting for default AP or connection, but can't find it, nor can I find an appropriate reference in the manual. Ugh!

Resolved!
It would seem my JAMin was trying to access the internet not through the gateway, but through my laptop. As I don't have the laptop setup to share an internet connection, it would allow my JAMin to connect, but that was all. I went in the room where my desktop is, registered on the network there and bingo!
Too simple, should have tried that right away but it didn't occur to me at the time. Thanks for the help anyway Matterhorn!

Wifi/Pocket IE problem

Okay, I am currently using a Samsung i730 with WM5.
Since I got it, the internet has been perfect via Wi-fi with EVDO blocked off. About a week ago, when I tried to use the internet, I would always type in an address and get this:
"The address is not valid. Please check the address and try again."
I've read other people had some similar problems but did not find a solution. Please someone help me? I don't want to use another browser other than Pocket IE.
Thank you

if you under connections have picked my network in both the dropdownbox's rather then my isp
and it still does it
i would look into
the ms network tools
and try ping and the likes
or connect to activesync with usb or bluetooth and see if that grant
internet access
could also be that the router have mac filtering and dont include the wifi's mac address

Thanks for the help.
I tried everything and still not working. Now it is even worse. The Wi-Fi won't even connect to the internet for other problems anymore.
I guess my only option is a hard reset. A hard reset would erase everything right? Also, where would I hard reset? Is it the small hole I need to push a paper clip into?

Got WAP54G Wifi Router, set it up on WEP - Wii connected with ease, but getting the XDA to connect is a steaming pile of poo.

Connects to local wi-fi, but can't connect to the internet.

Hi
I am having a problem connecting to the internet through my home Wi-Fi network on a Tab A (SM-T350). It connects to the WiFi network just fine. I can control my Harmony TV remote from the Tab A so I know it is solidly on the net. It shows up as a connected device on the router. When I try for any internet connection I get a "Server not found" message. The weird thing is it has connected to the Yahoo home page twice but I could not go anywhere from there. When I got out of the browser I was not able to reconnect. It won't sync Email either. I am using several browsers and get the same behavior all of them. No other devices are having any problem with the WiFi network, just the Tab A.
Any ideas? A web search talked about similar problems on some devices a couple of years ago. It had do with the date on the tablet being reset and some sort of sync issue. This is not the problem here.
Thanks
John

OldTacoman said:
Hi
I am having a problem connecting to the internet through my home Wi-Fi network on a Tab A (SM-T350). It connects to the WiFi network just fine. I can control my Harmony TV remote from the Tab A so I know it is solidly on the net. It shows up as a connected device on the router. When I try for any internet connection I get a "Server not found" message. The weird thing is it has connected to the Yahoo home page twice but I could not go anywhere from there. When I got out of the browser I was not able to reconnect. It won't sync Email either. I am using several browsers and get the same behavior all of them. No other devices are having any problem with the WiFi network, just the Tab A.
Any ideas? A web search talked about similar problems on some devices a couple of years ago. It had do with the date on the tablet being reset and some sort of sync issue. This is not the problem here.
Thanks
John
Click to expand...
Click to collapse
could be something wrong with your DNS

I guess you mean the Domain Name Service on the router? I can get internet access using the same router on different devices. What did you have in mind.

OldTacoman said:
I guess you mean the Domain Name Service on the router? I can get internet access using the same router on different devices. What did you have in mind.
Click to expand...
Click to collapse
maybe your device isn't picking it up for some reason. you can try manually setting the DNS to 8.8.8.8 in the advanced network settings and see if it fixes it.

I tried your suggestion. It was set DHCP, I went to static, and set the DNS to 8.8.8.8 and it did not help. I did notice that when I first try to bring up a web page after connecting to the WiFi network it will bring up the current page once. None of the links will work. Also if I shut down the browser and try to re-open that same web page it will not connect.
Anyway, thanks for the idea. If you can thing of anything else let me know.
John

I figured it out. I went onto the router it showed a device with the correct tablet MAC address was attached. It showed the MAC address was bound to a device with an IP address that did not match the IP address the tablet was trying to talk to. I don't know how that happened, but it did. Anyway I went onto the tablet, forced a static IP and made it match the one on the router.