Database Users

Flash successfull, logo stays at boot( Update) SOLVED

Finally Sammy came through....after tens of calls to Samsung, got the main-board replaced within warranty. It seems that the NAND eventually dies for each and every device, I was told. The downside is that they replaced it with a 8Gb, it was 16Gigs.
Anyway, is it just me or anyone noticed that original Focus with the SD slot is waaayyyyy faster than OMNIA7 when it comes to updating trough Zune?
I am having the freaking time of my life when I am near smashing an Omnia 7
Trying to help a friend ( I had a lot of Focuses but no Omnia so far):
-device was on an boot loop- no downoad mode, no nada, just the Omnia7 logo flashingon screen
- volume up+ camera+ POWER PUT IT IN DOWNLOAD MODE - it never said download mode on screen but the WP7 flash tool showed a connection under port 14
- flashed the files from I8700ORAJID flash succesfull STILL at boot logo, now it just stays there doesn't flash
- I can put is successfully and properly in download mode - yellow triangle and so on.
Open Phone image at : C:\omnia7all\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\omnia7all\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\omnia7all\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\omnia7all\signed_CSC_Cetus_Europe_I8700XECJJ6.csc
Open CSC image at : C:\omnia7all\signed_CSC_Cetus_Europe_I8700DTMJJ6.csc
Detect COM16 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
[Channel 0] APPSBL Download Success!!
[Channel 0] Erase CSC Region
[Channel 0] Write CSC Data
[Channel 0] CSC Download Success!!
[Channel 0] Erase PDA Region
[Channel 0] Write PDA Data
[Channel 0] PDA Download Success!!
[Channel 0] FLASH LOCK
Detect COM16 Port
IT STILL STAYS AT OMNIA7 LOGO and the WP7 flasher still shows a connection under port 16.
Anybody with the same problem?

it seems that some roms are flashing and some are returning errors
this is a 16G device... weird
Open Phone image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_CSC_Cetus_Europe_I8700XENJK1.csc
Open Phone image at : C:\omnia7csc\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\omnia7csc\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\omnia7csc\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\omnia7csc\signed_CSC_Cetus_Europe_I8700TMNJK1.csc
Detect COM16 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
ERROR[Channel 0] Write AMSS Data Fail!!!
[Channel 0] FLASH LOCK
Detect COM16 Port
Open Phone image at : C:\omnia7\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\omnia7\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\omnia7\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\omnia7\signed_CSC_Cetus_Europe_I8700ORAJID.csc
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
ERROR[Channel 0] Write AMSS Data Fail!!!
[Channel 0] FLASH LOCK
Detect COM16 Port
Open Phone image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_phone_Cetus_Europe.bin
Open Eboot image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_eboot_Cetus_Europe.eb0
Open PDA image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_pda_Cetus_Europe.nb0
Open CSC image at : C:\Users\Eto\Desktop\I8700 XEN I8700XENJK1\I8700 XEN I8700XENJK1\signed_CSC_Cetus_Europe_I8700XENJK1.csc
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
ERROR[Channel 0] Write AMSS Data Fail!!!
[Channel 0] FLASH LOCK
Detect COM16 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase AMSS Region
[Channel 0] Write AMSS Data
[Channel 0] AMSS Download Success!!
[Channel 0] Erase DSP1 Region
[Channel 0] Write DSP1 Data
[Channel 0] DSP1 Download Success!!
[Channel 0] Erase APPSBL Region
[Channel 0] Write APPSBL Data
ERROR[Channel 0] Write APPSBL Data Fail!!!
[Channel 0] FLASH LOCK
I think there's no Rom for this device....

Memory size doesn't matter on the ROM, they fit both 8 and 16GB. If i where you I would flash it with stock ROM and deliver it to a Samsung repair center. They should fix it for free.

ballajalla said:
Memory size doesn't matter on the ROM, they fit both 8 and 16GB. If i where you I would flash it with stock ROM and deliver it to a Samsung repair center. They should fix it for free.
Click to expand...
Click to collapse
This is why my friend came to me, he couldn't find the invoice ( actually it was a wedding gift) we still got the warrantycard but Sammy wants a proof of purchase...
Anyway, the whole thing is weird ... some Roms flash and some don't- I guess it depends on the wp7 flasher version also...
At one time the whole system booted like in updating mode ( PC--->Phone do not disconect) but it got stuck...
Is there anyway to trace what's the version of this phone by IMEI?
The box only says gt-i8700 and no branding at all...
Yep, it seems I need to find the right combo in order for this to work : right eboot+right PDA+ right csc

I'm sorry, cant help you with the flashing.
I would go to another service center, they should help you if you ask them. The model has only been on the market for a year, so it is most likely within warranty, and they can check that from the serial number, they don't need proof of purchase, if they say so they are just being dicks..

When I called up Samsung warranty they just told me to take it into a local centre. I rang the centre up and they said i just needed to drop it off with them...

Freypal said:
When I called up Samsung warranty they just told me to take it into a local centre. I rang the centre up and they said i just needed to drop it off with them...
Click to expand...
Click to collapse
I did call up the warranty center...they transferred me to the service center...I explained them that it was a wedding gift and it's more likely we're not gonna find the invoice- I mentioned the phone is a late 2010 model and it's covered under the 24 months EU warranty- but they said that without an invoice there's nothing they can do except repair it for money.

Update1
Samsung Austria is acting like dicks, they keep on asking about invoice/purchase proof in order to take it. They don't seem to care that, actually, there is no Omnia7 out-of-warranty yet ( due to the fact that it has a 24 months warranty and most of them were sold on early 2011).
Man, they know it's a common failure and they keep repeating the same answer.
Does anybody know how if there's a European Samsung customer service where I can ask about this issue?

I would contact Samsung on Facebook or Twitter, they seem to respond better there since it's out in the open.

any progress with this?? i have the exact same issues and cant get warranty repair.

Brick i917 1.3 while flashing MAGLDR

hi to all!
phone: samsung focus 1,3 and original ATT rom (3.jpg)
i've tried to flash MAGLDR and then mi7. I wait MAGLDR (DFT_MLI_SAM1) istalling more then 15 min, but there was no progress, so i unpluged usb from PC. Now i can't turn it on, it's black sreen, but when i connect phone to USB, i can see samsung modem in Device Manager.
than i try to install AT&T and ROGERS original rom's, but i've got errors in WP7 Downloader Ver 7.21 (1.jpg) and WP7_Downloader_Ver_7.05 (2.jpg)
What can i do with it?
sorry for english and thank you)

Hi taitchi,
I had the exact same issue. Pulled out usb while magldr installation. There was no vibration when pressed power and even screen was off on mine. I put the phone in download mode by pressing up, camera and power. Phone did not show any life but still computer detected it. (Use different usb or cable or in my case different computer.)
Reflash magldr first. You will be good to go again. (flashing stock failed for me.)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

prakash386 said:
Hi taitchi,
I had the exact same issue. Pulled out usb while magldr installation. There was no vibration when pressed power and even screen was off on mine. I put the phone in download mode by pressing up, camera and power. Phone did not show any life but still computer detected it. (Use different usb or cable or in my case different computer.)
Reflash magldr first. You will be good to go again. (flashing stock failed for me.)
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
thank you for your reply!
But yesterday i desided to try once more with WP7 Downloader Ver 7.41 for Publish, first 10-15 times i've got same error, as start post, but then COM3 connected successful and i've got this log:
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Fail !!!
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
here it has stopped, and now i have got full dead phone( there is nothing in device manager, then I plug it to USB
i think, this problem was because of cable or my home PC, as on work pc I successfully flashed another i917.

I have the exact same problem. tried flashing the wp 7.8 o
taitschi said:
thank you for your reply!
But yesterday i desided to try once more with WP7 Downloader Ver 7.41 for Publish, first 10-15 times i've got same error, as start post, but then COM3 connected successful and i've got this log:
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Fail !!!
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH LOCK
Detect COM3 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
[Channel 0] MIBIB Download Success!!
[Channel 0] Erase FSBL Region
[Channel 0] Write FSBL Data
[Channel 0] FSBL Download Success!!
[Channel 0] Erase OSBL Region
[Channel 0] Write OSBL Data
[Channel 0] OSBL Download Success!!
[Channel 0] Erase AMSS Region
here it has stopped, and now i have got full dead phone( there is nothing in device manager, then I plug it to USB
i think, this problem was because of cable or my home PC, as on work pc I successfully flashed another i917.
Click to expand...
Click to collapse
Same problem here. tried flashing the wp 7.8. ended with a infinite samsung logo loop. tried the above method. got the same error and a dead phone. tried all over the internet. nothing much found

focus 1.3 dead while installing MAGLDR
PLEASE PLEASE PLEASE PLEASE HELP ME GUYS
I had Focus 1.3 with official at&t windows phone 7 ORIGINAL
I tried to install MAGLDR,it was not responding at all so i unpluged usb it became a brick((
Now it doesn't respond to any keystrokes, charging, or connecting to PC
please any one help me please
---------- Post added at 10:43 AM ---------- Previous post was at 10:32 AM ----------
Help me out guys focus was full working but i was intalling magldr in download mode but it was unresponsive till 20 mins so i unpluged it now no keys rresponding and it is not switching on please help me guys

JTAG only...
I had the same problem.
Bring your phone to the service center.

Brick i917 1.4 while flashing MAGLDR phone stuck at samsung logo in pink colour
Brick i917 1.4 while flashing MAGLDR samsung logo stuck & its change to pink colour & error triangle change to MAGLDR is not responding its show error it can be format & access download mode.i try Samsung-i917-Focus-firmware-UCJK2-ATT-USA , Samsung-i917-Focus-firmware-UCJK3-ATT-USA_4K , Samsung-i917R-Focus-firmware-UXJL2-ROGERS-CANADA only ucjk2-att-usa & uxjl2-rogers-canada (Product_Force_Select_MD5_X) will work but still stuck at samsung logo after flashing & dft magldr allso not working it show
[Error Description]:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (Active Sync or Windows Mobile Device Center)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs.
[Info]: USBWorkDWPI.cpp (136)
please help me
thanks in advance

My 1.3 finished flashing alright. Did you make sure you had WMDC installed on your pc? I had to reboot my computer, initialize the MAGLDR installer on the pc and phone and only THEN connect the USB.

How did you do it?
euskalzabe said:
My 1.3 finished flashing alright. Did you make sure you had WMDC installed on your pc? I had to reboot my computer, initialize the MAGLDR installer on the pc and phone and only THEN connect the USB.
Click to expand...
Click to collapse
I can do all those things and even when the USB has connected and I try to flahs I get this error. Please help:
Please make sure that your device is connected to your computer.
also make sure that right drivers are installed (Active Sync or Windows Mobile Device Center)
Try to connect device to different USB port and also you can try to reboot PC.
Also you can try to exclude USB hubs
Click to expand...
Click to collapse

same here please find a solution
im also a focus user, i've tried all the possible things that i could do, still no use, the Samsung logo blinks,
im able to get into download mode, and not format mode, (it flicks off a second)
please help .. :crying:

jayadattasai said:
im also a focus user, i've tried all the possible things that i could do, still no use, the Samsung logo blinks,
im able to get into download mode, and not format mode, (it flicks off a second)
please help .. :crying:
Click to expand...
Click to collapse
I had screwed up my Focus when trying to update to WP 7.8 using the Seventh Eighter method. I was able to fix everything later and now I have Custom ROM running on my phone. I have put up all the steps I followed into a blogpost.
opensourcecollection.blogspot.in/2013/03/installing-windows-phone-78-on-samsung.html
Hope it helps! :angel:

[Q] Help Samsung Omnia 7 MIBIB Flash Error

Hello,
I am getting every time a MIBIB Flash Error. I have a Samsung Omnia 7 where the software update failed and doesn´t start anymore. I just getting the boot logo from samsung, thats all. I can set it to the Download Mode by pressing Camera+Volume Up+Power but the by Flashing I am getting the mentioned error.
(1)\signed_pda_cetus_europe.nb0
Open CSC image at : c:\users\***********\downloads\i8700dtmjj6(1)\signed_csc_cetus_europe_i8700dtmjj6.csc
Open Phone image at : c:\users\***********\downloads\i8700dtmjj6(1)\signed_phone_cetus_europe.bin
Open CSC image at : c:\users\***********\downloads\i8700dtmjj6(1)\signed_csc_cetus_europe_i8700dtmjj6.csc
Open Eboot image at : c:\users\***********l\downloads\i8700dtmjj6(1)\signed_eboot_cetus_europe.eb0
Open PDA image at : c:\users\***********\downloads\i8700dtmjj6(1)\signed_pda_cetus_europe.nb0
Detect COM4 Port
[Channel 0] Confirm Model Name
[Channel 0] FLASH UNLOCK
[Channel 0] FLASH UNLOCK Success!!!
[Channel 0] Send Partition Table
[Channel 0] Partition Table is correct
[Channel 0] Erase MIBIB Region
[Channel 0] Write MIBIB Data
ERROR[Channel 0] Write MIBIB Data Fail!!!
[Channel 0] FLASH LOCK
I hope there is some one in the world wide web, who can help me. :crying:

I had the same problem as You - Flash lock. Nobody since 6m is able to help me. I only wasted my time.

[Q] [HELP] S4 Freeze on first boot or recovery boot,can acces download mode

My phone freezes on this boot screen or with same logo + blue text at top RECOVERY BOOTING...
Samsung galaxy S4 GT-I9505,
Phone not freezing at all,but feels like it does, with turn off/on button can easy turn phone on or off, enter download mode and odin recognize it.
Samsung Kies found phone, i can download firmware updates and install it, but Kies emergency firmware restore dont find my device.
Odin install all time without any problems.
Strange is that, when i reinstal rom, after all compleates, when i turn on phone for first time, it automaticly allways goes in recovery mode.
What i have done:
Reinstal original firmware with DIFERENt Odin softwares-> No changes
Instal custom ROMs -> No changes
Instal diferent bootloaders-> No changes (cant' boot in recovery, freeze on boot screen )
Instal different PITs -> No changes
Instal custom ROMs + different PITs -> No changes
Different USB cables and ports -> No changes
1. Download odin 3.07(tried different version too) ( you have option NAND ERAS ALL )
2. Download MH8
3. Download PIT (from forum )
4. Odin - check NAND, PIT file, PDA AND START
5. After flash your phone wont boot ( stuck at samsung Logo )
6. Boot in recovery ( volume up )( original recovery )
(here i stuck) and after reinstal my phone dont turn on automaticly
7. Factory reset + format cache.
8. Will reboot automatically the phone
Click to expand...
Click to collapse
Uninstall Recently-Installed Apps
You’ve booted your phone up in Safe Mode, that’s the first step to fix stuck up Galaxy S4. Now recall apps you recently installed, or the ones you installed prior to this problem. While Safe Mode doesn’t run third-party applications, you can still get rid of them.
From the Home screen, tap the Menu key.
Tap Settings.
Tap More tab and choose Application Manager.
Swipe left to choose All tab.
Now find apps you want to uninstall. Note that you can uninstall one app at a time.
After you’ve uninstalled apps you think were causing the problem, try to reboot normally to see if the phone boots up this time.
Click to expand...
Click to collapse
With toothbrush cleane ann motherboard contacts
With hot air blower warm up some MB parts
And flashing roms true Heimdall
Kies says my phone is UK
Any ideas what i can do else ?
Last thing what i could do is change eMMC chip
Click to expand...
Click to collapse

ODIN All pass
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUAMDM_I9505OXXAMDB_I9505XXUAMDM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> persdata.img.ext4
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> NON-HLOS.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse

BUMP

Next tip-> usb connector +flex , i will change this and in few weaks will see result

Another bump
Really noone reply or give an idea how to fix my problem

So your phone won't boot at all? It's not really clear to me.
If all the thing that you mention fail. Have you tried to use re-partition in Odin?
You can use that option but you have to know that the flashing will succeed. If you can flash the same firmware without re-partition, then you can try the same firmware with re-partition.
So load up your firmware, try if the flashing succeeds. Then load the same firmware with re-partition and a .pit file.

Lennyz1988 said:
So your phone won't boot at all? It's not really clear to me.
If all the thing that you mention fail. Have you tried to use re-partition in Odin?
You can use that option but you have to know that the flashing will succeed. If you can flash the same firmware without re-partition, then you can try the same firmware with re-partition.
So load up your firmware, try if the flashing succeeds. Then load the same firmware with re-partition and a .pit file.
Click to expand...
Click to collapse
Tried with repartion, without, tried full nand erase.
Clearly phone wont boot, like it there would not be what to boot ( i pres power button and it shows screen like in picture, i hold power button and it turns off. Power button + volume up button, it shows screen like in picture + blue text booting in recovery and after 5,10,30 min nothing happening screen show tha same,i hold power button and phone easy turn off, phone dont freeze, i feel like only thing what work is downloade mode

And flashing roms true Heimdall? Try that. Download it from here:
http://glassechidna.com.au/heimdall/
and a guide is here:
http://forum.xda-developers.com/showthread.php?t=2317311
ps You didn't metion if you were already on a 4.3 Knox rom. If so, make sure you use a 4.3 rom, because you can't revert back.

Lennyz1988 said:
And flashing roms true Heimdall? Try that. Download it from here:
http://glassechidna.com.au/heimdall/
and a guide is here:
http://forum.xda-developers.com/showthread.php?t=2317311
ps You didn't metion if you were already on a 4.3 Knox rom. If so, make sure you use a 4.3 rom, because you can't revert back.
Click to expand...
Click to collapse
i tried heimdall but when i get to terminal comands something didnt worked out , coz i used windows, ill try linux soon.
4.3 knox rom, lattest official

justMK said:
i tried heimdall but when i get to terminal comands something didnt worked out , coz i used windows, ill try linux soon.
4.3 knox rom, lattest official
Click to expand...
Click to collapse
Did you have Microsoft Visual C++ 2012 redistributables installed on your system? Its required.

Lennyz1988 said:
Did you have Microsoft Visual C++ 2012 redistributables installed on your system? Its required.
Click to expand...
Click to collapse
in first time not, in second yes, i remembered fault was windows XP, today i tried in win 7 a heimdall but said that in official rom missing some file, it is night allredy, progress will be posted

Heimdall all files flashed no result.
but with repartion have problems, showing
secure check fail it
Click to expand...
Click to collapse
, used pit
CSB_signed_Fusion3_EUR_0325_V2.pit
Click to expand...
Click to collapse
My GT-I9505 firmware.xml
<?xml version="1.0" encoding="UTF-8"?>
<firmware version="1">
<name>Test Firmware</name>
<version>1.1</version>
<platform>
<name>Android</name>
<version>4.3.0</version>
</platform>
<developers>
<name>Benjamin Dobell</name>
<name>Hedonism Bot</name>
</developers>
<url>http://www.glassechidna.com.au/</url>
<donateurl>http://www.glassechidna.com.au/donate/</donateurl>
<devices>
<device>
<manufacturer>Samsung</manufacturer>
<product>GT-I9505</product>
<name>Galaxy S</name>
</device>
<device>
<manufacturer>Samsung</manufacturer>
<product>GT-I9505</product>
<name>Galaxy S 4</name>
</device>
<device>
<manufacturer>Samsung</manufacturer>
<product>GT-I9505</product>
<name>Galaxy 4</name>
</device>
</devices>
<pit>CSB_signed_Fusion3_EUR_0325_V2.pit</pit>
<repartition>0</repartition>
<noreboot>0</noreboot>
<files>
<file>
<id>20</id>
<filename>boot.img</filename>
</file>
<file>
<id>18</id>
<filename>cache.img.ext4</filename>
</file>
<file>
<id>27</id>
<filename>hidden.img.ext4</filename>
</file>
<file>
<id>2</id>
<filename>modem.bin</filename>
</file>
<file>
<id>1</id>
<filename>NON-HLOS.bin</filename>
</file>
<file>
<id>26</id>
<filename>persdata.img.ext4</filename>
</file>
<file>
<id>21</id>
<filename>recovery.img</filename>
</file>
<file>
<id>16</id>
<filename>system.img.ext4</filename>
</file>
</files>
</firmware>
Click to expand...
Click to collapse

justMK said:
Heimdall all files flashed no result.
but with repartion have problems, showing , used pit
My GT-I9505 firmware.xml
Click to expand...
Click to collapse
Hmm, so that did not solve it.
Can you try to flash a prerooted stock rom from this thread:
http://forum.xda-developers.com/showthread.php?t=2250824
Then after you flashed it, flash a custom recovery, for example Philz. Then try to wipe and flash a custom rom.

Lennyz1988 said:
Hmm, so that did not solve it.
Can you try to flash a prerooted stock rom from this thread:
http://forum.xda-developers.com/showthread.php?t=2250824
Then after you flashed it, flash a custom recovery, for example Philz. Then try to wipe and flash a custom rom.
Click to expand...
Click to collapse
Done all with rom from that thread, now new text on screen :
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set warranty Bit : recovery
Click to expand...
Click to collapse
I will try different recoveries
(Philz 6.0 and 5,18,5 and TCWR one of latest, same

My pit from phone ( some edit, to shrink displayed pit for suitable reading)
I9505 pit from phone FULL here
Identifier: 1
Partition Name: APNHLOS
Flash Filename: NON-HLOS.bin
Identifier: 2
Partition Name: MDM
Flash Filename: modem.bin
Identifier: 3
Partition Name: SBL1
Flash Filename: sbl1.mbn
Identifier: 4
Partition Name: SBL2
Flash Filename: sbl2.mbn
Identifier: 5
File Size (Obsolete): 0
Partition Name: SBL3
Flash Filename: sbl3.mbn
Identifier: 6
Partition Name: ABOOT
Flash Filename: aboot.mbn
Identifier: 7
Partition Name: RPM
Flash Filename: rpm.mbn
FOTA Filename:
Identifier: 8
Partition Name: TZ
Flash Filename: tz.mbn
Identifier: 9
Partition Name: PAD
Identifier: 10
Partition Name: EFS
Flash Filename: efs.img.ext4
Identifier: 11
Partition Name: MODEMST1
Flash Filename: nvrebuild1.bin
Identifier: 12
Partition Name: MODEMST2
Flash Filename: nvrebuild2.bin
Identifier: 13
Partition Name: M9KEFS1
Flash Filename: m9kefs1.bin
Identifier: 14
Partition Name: M9KEFS2
Flash Filename: m9kefs2.bin
Identifier: 15
Partition Name: M9KEFS3
Flash Filename: m9kefs3.bin
Identifier: 16
Partition Name: SYSTEM
Flash Filename: system.img.ext4
Identifier: 17
Partition Name: PERSIST
Flash Filename:
Identifier: 18
Partition Name: CACHE
Flash Filename: cache.img.ext4
Identifier: 19
Partition Name: PARAM
Flash Filename: param.lfs
Identifier: 20
Partition Name: BOOT
Flash Filename: boot.img
Identifier: 21
Partition Name: RECOVERY
Flash Filename: recovery.img
Identifier: 22
Partition Name: FOTA
Flash Filename:
Identifier: 23
Partition Name: BACKUP
Flash Filename:
Identifier: 24
Partition Name: FSG
Flash Filename:
Identifier: 25
Partition Name: SSD
Flash Filename:
Identifier: 26
Partition Name: PERSDATA
Flash Filename: persdata.img.ext4
Identifier: 27
Partition Name: HIDDEN
Flash Filename: hidden.img.ext4
Identifier: 28
Partition Name: CARRIER
Flash Filename: carrier.img.ext4
Identifier: 29
Partition Name: USERDATA
Flash Filename: userdata.img.ext4
FOTA Filename: remained
--- Entry #29 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 70
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 0
Partition Block Count: 34
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PGPT
Flash Filename: pgpt.img
FOTA Filename:
--- Entry #30 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 71
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 34
Partition Block Count: 16
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: PIT
Flash Filename: MSM8960.pit
FOTA Filename:
--- Entry #31 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 72
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 50
Partition Block Count: 32
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: MD5
Flash Filename: md5.img
FOTA Filename:
--- Entry #32 ---
Binary Type: 0 (AP)
Device Type: 2 (MMC)
Identifier: 73
Attributes: 5 (Read/Write)
Update Attributes: 1 (FOTA)
Partition Block Size/Offset: 30777311
Partition Block Count: 33
File Offset (Obsolete): 0
File Size (Obsolete): 0
Partition Name: SGPT
Flash Filename: sgpt.img
FOTA Filename:
Click to expand...
Click to collapse

flashed latest official firmware
I9505XXUEMK9_I9505H3GEMJ2_I9505XXUEMK9_HOME.tar.md5
Click to expand...
Click to collapse
same, turning on and showing samsung galaxy gt-i9505 screen and stays like that

Feels like recovery is dead cant boot noone recovery, not orginal not custom

justMK said:
Tried with repartion, without, tried full nand erase.
Clearly phone wont boot, like it there would not be what to boot ( i pres power button and it shows screen like in picture, i hold power button and it turns off. Power button + volume up button, it shows screen like in picture + blue text booting in recovery and after 5,10,30 min nothing happening screen show tha same,i hold power button and phone easy turn off, phone dont freeze, i feel like only thing what work is downloade mode
Click to expand...
Click to collapse
Two commemts:
1) you are trying to flash a 4.2.2 rom, so we assume you were in a 4.2.2 rom previously and you still have not 4.3 bootloader. If you had a 4.3 rom previously, you can only flash 4.3 roms.
2) i9500 can be flashed by both odin 3.07 and 3.09; i9505 can only be flashed by odin 3.09. If you use a prior versikn, the flashing process could get incomplete.
Enviado desde mi GT-P7510 usando Tapatalk 2
---------- Post added at 06:29 AM ---------- Previous post was at 06:11 AM ----------
Same issue here?
http://forum.xda-developers.com/showthread.php?t=2555775
Enviado desde mi GT-P7510 usando Tapatalk 2

jaswinky said:
Two commemts:
1) you are trying to flash a 4.2.2 rom, so we assume you were in a 4.2.2 rom previously and you still have not 4.3 bootloader. If you had a 4.3 rom previously, you can only flash 4.3 roms.
2) i9500 can be flashed by both odin 3.07 and 3.09; i9505 can only be flashed by odin 3.09. If you use a prior versikn, the flashing process could get incomplete.
Enviado desde mi GT-P7510 usando Tapatalk 2
---------- Post added at 06:29 AM ---------- Previous post was at 06:11 AM ----------
Same issue here?
http://forum.xda-developers.com/showthread.php?t=2555775
Enviado desde mi GT-P7510 usando Tapatalk 2
Click to expand...
Click to collapse
Thanks for reply.
At beginning i was 4.2 and tried all warriants as i mention before, then i succesfully upgraded to 4.3 knox , but result was same, ccan go download mode flash, i can start recovery mode where it stop loading recovery boting or recovery booting secure check warranty bi : recovery ( with Phil). I tried odin 3.09 , but it was for once and result was samem usually 3.04 from which i succesfully got 4.3 knox + all new knox text too

:S
SAME PROBLEM WITH I9500
PEOPLE PLEASE HELP http://forum.xda-developers.com/showthread.php?t=2555775

FAILED Odin flash! Download mode now goes to "POWER RESET of UNKNOWN UPLOAD MODE"

FAILED Odin flash! Download mode now goes to "POWER RESET of UNKNOWN UPLOAD MODE"
Can this be fixed?
When I turn the phone on, it shows on the upper left hand corner of the "SAMSUNG GALAXY S7 EDGE" screen
Code:
ASV TBL VER = 8
ASV TBL VER2 = 0
RPMB PROVISIONED (Same thing in battery charging screen)
then when booting download mode I get:
Code:
[ AST_STAT = 0x10000000 ]
EVT 1.8
ASV TBL VER = 8, Grade = C
ASV TBL VER2 = 0
ECT : PARA005b
LOT_ID = NA4PD
CHIP_ID = 818C8E14d9c
CHIP_ID2 = 0000000000
MNGS: 38'C APPOLO:37'C G3D:38'C ISP:38'C
AT [email protected] AT "% BT I AT ATconsole=ram loglevel=4 sec_debug. level=1 androidboot.debug_level=0x494d softlockup_panic=0 asv_table_version2=0 ess_setup=0x91200000 [email protected] se
When trying to flash to ODIN I get:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I haven't found anything for this problem with this phone. Odin is unable to recognize the phone. I've found some forums that claim the JTAG is the only solution for this problem on other phones. Any advice would be greatly appreciated.

if you can go in download mode or if your screen turns on you don't need jtag, that what i have learned. maybe m wrong

It's unknown upload mode only, no download mode, so I don't know how to proceed from there. In this unknown mode, Odin is unable to recognize the phone.

I have the same problem, did you find a solution?

red screen upload mode after odin push key combination odın mode device stock firmware flash
---------- Post added at 11:54 PM ---------- Previous post was at 11:49 PM ----------
How to fix power reset or unknown upload mode very easy just watch you must go to phone dial app and type *#9900# to enter system dump mode and then select debug level to high thats it hope you enjoy subscribe hit the like button for all android devices after odın mode