ums lunfile - HD2 Android Q&A, Help & Troubleshooting and Genera

I wanted to go back from WP7 (Yuki rom) to Android, so I installed CWM back with the requested partition layout for the new rom, but now I cannot mount SD card back. It constantly says its unable to write ums lunfile and it wont let me mount SD storage or install any rom's. USB flasher from MAGLDR works fine but when i go to MassStorage it wont mount it on the PC. I have MAGLDR 1.13 a 3.0.2.4 CWM and the EU version of HD2. Please help, thanks

when passing from wnmo7 to android you should format your sd (panasonic sd formatter recommended).or your phone can only see 200mb of it.

yeah but the application cannot see my card and the system is not giving it a drive letter...the card shows up when I go to computer administration but i cannot do anything with it

Related

[Q] Can't copy files to SD

Hello,
Today I've flashed MAGLDR+CWM and then flashed Android. All worked perfectly until I decided to flash another build and tried to copy the ZIP package to my SD card, which I couldn't. When booting to MAGLDR usb mass storage option the computer "sees" the SD, but as soon as file copy starts the computer "loses" the SD and MAGLDR freezes (had to take battery out). When I boot the build I flashed, connect USB cable and select USB Mass storage, the computer sees the drive but claims there's no disk in it. What is wrong here?
TIA
Don't use magldr mass storage, it has bugs. Boot into cwm, go to mounts and storage and select mount usb storage. Works perfectly.
MAGDLR work for me... CWM not...
Anyway, the best is to just slot your SD in a card reader.
NB: If you're under Android, do not forget to "unmount" the SD before removing it.
[SOLVED][Q] Can't copy files to SD
It now looks like the problem is PC-related, as I was able to successfully copy files to SD from another computer. Thank you for your help.

[Q] New SD Card

So i have Typhoon CyanogenMod7 (MAGLDR) running like a wet dream on my HD2, but the 2gb SD card is really a pain. So i found an 8gb from my Aino.
I have still not quite wrapped my head around how exactly everything is done, i get lost with all the partitions.
ANYWAY what i want is to use the new card without losing anything. What do i haveto do?
(My reply could take a while, so thanks in advance [really thanks])
boot into CWM, backups/restore, take a backup.
connect phone to PC, use CWM, enter mounts/storage, mount USB,
on the pc, copy off all the files found in the drive that shows up (thats the FAT32 partition)
((or use external card reader if you have one and prefer to do so, or from within running android, doesnt matter))
swap out sd cards,
again in CWM, advanced - partition sd card
re-mount USB, copy back on the FAT32 stuff
in CWM backup / restore, choose restore - advanced - restore sd-ext
restart phone, should work as if nothing happened.
Thanks a mil

[Q] Big problem with android

I have Miui newst version installed.. but then it got jammed.. i removed battery from phone and restarted.. anrdoid didnt start.. well i was going to make a fresh install with it.. but no.. i had no install package on internal sd anymore... and i cant get it there anyway.. any suggestion.. have cwm version 5.0.2.3 i cant mount ext. sd card in mounts and storages..says only error mounting /sd-ext! and i cant use mount usb storage coz it says E: Unable to write to ums lunfile (No such file or directory)! is there anyway to get install zip to internal sd or install os from external sd?.. or do i throw this phone to a lake..?
Did you try to remove the SD Card from the phone and plug it in your PC directly (with some card reader)?
there is internal and external sd in this phone.... and cwm allows installing only from internal sd.. and i think u cant remove it from phone.. :/.. its internal..
The phone has a partition with 2GB which is used for internal sdcard storage and also have a slot to mount an external sdcard. And cwm recovery use external sd card.
Do you have an external sdcard mounted?

failed to mount /sdcard

Hi guys, i know this has come up on here before and i've searched through all the threads but found only a lot of information which is of no use at all.
Ok heres the info on my phone:
HSPL 2.08
Task 29ned
2.15.50.14 Radio
CustomRUU
Magdlr
CWM and also tried TWRP
I've used windows format from recovery (usb mass storage) and also minitool partition starting with fat32 and 32kb sectors then ext3 partition but on mounting it only returns the following:
E: failed to mount /sdcard (Invalid Argument)
Error mounting /sdcard
so far tried fat32, ntfs, ext2, ext3 out of sheer desperation
Any help would be muchly appreciated but i'm assuming it might be the sdcard at fault i really don't know.
Thanks in advance.
Dan
Hi Dan
In minitool, did you set the primary/logical box to primary?
Why ext3?
Also what rom did you install, and what install method?
Robbie P said:
Hi Dan
In minitool, did you set the primary/logical box to primary?
Why ext3?
Also what rom did you install, and what install method?
Click to expand...
Click to collapse
Thanks for your reply, yes both were set to primary, ext3 as that what lots of threads on here advised. Formatted to fat32 first. I can see it on my pc but can't mount it on the phone? Any ideas?
No rom on the phone yet as i can't get the zip files to be recognised as the sdcard can't mount so you can see my problem now.
Am now getting a new error message saying:
E: Unable to write to ums lunfile (No such file or directory)
Thanks
Dan
Hi Dan, best to start afresh with your card. Use this https://www.sdcard.org/downloads/formatter_4/ to format it to fat32, and see if it shows up then.
I don't know of any latest roms using ext3, most use an ext4 partition on the sd card
Anyway, report back
Robbie P said:
Hi Dan, best to start afresh with your card. Use this https://www.sdcard.org/downloads/formatter_4/ to format it to fat32, and see if it shows up then.
I don't know of any latest roms using ext3, most use an ext4 partition on the sd card
Anyway, report back
Click to expand...
Click to collapse
Ok i'm slowly getting somewhere, twrp didn't work, minitool didn't work, cwm didn't work so then i tried the new version of twrp and formatted it on the sdcard which can now mount sdcard on twrp.
The issue i'm having now is that adb doesn't list it under devices. I'm having to use adb sideload as because its been formatted on the phone it can't be seen on the pc? Not sure if thats as i don't have the hd2 drivers on the pc but its got hd2 toolkit installed. Either way i now don't have any way of installing from the rom zips I have.
Thanks
Dan
Hi Dan, I don't think Android Debug Bridge will work if you do not yet have android on your phone (unless it works from twrp). It seems you have magldr installed, can you use usb mass storage to transfer your rom to phone?
Also I do highly recommend using the sd formatter i linked to earlier, but i assume you do not have a card reader, hence doing all from phone.
Best of luck
I had this problem to fix
i installed everything then formatted card to fat32 using mini partition wizard and then did EXt4 and swap partition from Cwm Recovery and it worked just fine
Fix for unable to mount sdcard error
Neurom707 said:
I had this problem to fix
i installed everything then formatted card to fat32 using mini partition wizard and then did EXt4 and swap partition from Cwm Recovery and it worked just fine
Click to expand...
Click to collapse
Just incase anyone has the same problem i had with the never ending unable to mount sdcard problem.
What this turned out to be was cwm would format the card but only a certain area, then if you format with windows it will again only format a certain area that it see with its own file system. Then minitools would have a strange arrangement of differing file systems and changing this by usb connection through magdlr kept creating these problems.
I was trying to use adb to connect the phone to the pc through usb drivers but in the end it simply wasn't worth the effort.
First I went over cwm with the latest version of twrp.
Then I went out to buy a new sdcard simply to get a sdcard to microsd card tool.
Reformat the sdcard (with minitool partition) once in the pc (using the microsd to sdcard tool) to fat32 or fat32 with an ext4 partition if yr doing nand and dataext. Both partitions need to be primary and make sure there are no other partitions on the card this may take a few goes as sometimes you get a random partition or I did anyway.
Then put your rom files on the sdcard using the pc.
Remove sdcard from pc and install in phone.
Boot phone into magldr and choose recovery and this will take you into twrp and simply choose install and find the rom file you want to install.
Don't worry if you have any problems in the rom install you can always go back into twrp and wipe the system which is the rom.
Hope that helps anyone who was experiencing the same issues.
Alternate workaround
I had the same problem others have above. I wound up using a different workaround, and was able to do it with just the phone, a USB cable, and a Windows 7 PC. No SD adapter was needed and there was no need to remove the microSD card from the phone.
I took a stock WinMo 6.5 TMOUS HD2, installed Black LK and TWRP and cleared everything (cache, etc.). Then I used Black LK (very similar to cLK) to re-partition the internal storage to accept my new Android ROM. All I needed at this point was to install the ROM. I tried to copy my Android ROM to a microSD card I had in another phone and then bring it over, but TWRP was unable to read the card. It also couldn't mount the card via USB.
I was able to use TWRP to format the microSD. Then TWRP was able to USB Mount the microSD, but when my PC dectected it, I received a popup indicating that I needed to format the SD before Windows could use it. I said "yes", and allowed Windows to format the card as one big FAT32 partition. It took a few minutes, during which I was a little nervous as there was no progress meter or anything else on either the phone or the PC to indicate it was working. But once it finished, Windows was finally able to access the microSD card and copy the .zip file for the ROM. Once that was complete, I told Windows to eject the microSD, then un-mounted it in TWRP. And, finally, TWRP was able to see the ROM file and install it to NAND from the microSD.
Anyway, thought I'd post it up in case anybody else runs into this and doesn't have a card reader or adapter.

[Q] sd not responding

Hi,
i have problem with sd card
i dont have sistem installed and i cant mount sd card
when i connect phone to computer it doesnt recognize it
i tried in download mode but the same thing happens
i have CWM v 5.0.2.8 installed
when it try to mount sd card it says: unable to write to ums lunfile (no such file or directory)
Can someone help?
first backup any data you have on your sd card
connect sd card to pc via card reader
remove all partitions with minitool (google it) and create a new partition of fat32 and format it with minitool
next boot up your phone with the sd card in
goto
settings
storage
unmount sd card
erase/format sd card
now go into cwm - you sd card will now be mountable
you can then copy any backups back to sd card
An odin connection does not require an sd card - if odin is not connected you either dont have the usb drivers installed or you have a faulty usb cable/port
I think you didnt see that i have no system on mobile
I cant go to settings
jacky__ said:
I think you didnt see that i have no system on mobile
I cant go to settings
Click to expand...
Click to collapse
flash stock rom via odin - it doesnt require an sd card
if your odin doesnt show a connection under com id then you havent installed the usb drivers
you can format your sd on a pc via a card reader with mini tool as already explained

Categories

Resources