Instructions to patch from GB leak(.2) to (.3) - Droid Incredible General

Here is what I had to do. Downloaded the (.2) leaked RUU, put in SD card root dir, and named PB31IMG.zip then downloaded patch (can be found here in forums, or send me a message and will provide) renamed update.zip and put in SD card root dir. Battery pull into bootloader, when asked to complete upgrade hit yes, when upgrade done, DO NOT reboot, go back to bootloader and the update will start. You'll be greeted with a screen saying you've successfully upgraded to (.3) Hope this helps those stuck with .2

This only works if they're still s-off and still have the stock recovery and bloatware.
If I've helped you, hit the thanks button!

AJGO23 said:
This only works if they're still s-off and still have the stock recovery and bloatware.
If I've helped you, hit the thanks button!
Click to expand...
Click to collapse
Not exactly, I was s-on when I did the above. So if you do exactly as I did above it works. I've never been rooted.

Can you get with doug piston on this? He's been looking for a .3 RUU. I don't know if he could patch .2 up to .3 for his uses, but I think he'd be interested.

I will try this tonight and report back. What exactly was updated between the .2 and .3 releases?
Sent from my ADR6300 using XDA App

greatbruce said:
Not exactly, I was s-on when I did the above. So if you do exactly as I did above it works. I've never been rooted.
Click to expand...
Click to collapse
Sorry I completely misread. I was thinking of those that had unrooted for the OTA and only received the .2 update and not the .3, who were both stuck without root and the .2 update. My mistake.

roflhorse said:
I will try this tonight and report back. What exactly was updated between the .2 and .3 releases?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Lots of misc apps and files were unnoticably updated, and the kernel was updated. Also the backlight issue some people had was fixed.

greatbruce said:
Here is what I had to do. Downloaded the (.2) leaked RUU, put in SD card root dir, and named PB31IMG.zip then downloaded patch (can be found here in forums, or send me a message and will provide) renamed update.zip and put in SD card root dir. Battery pull into bootloader, when asked to complete upgrade hit yes, when upgrade done, DO NOT reboot, go back to bootloader and the update will start. You'll be greeted with a screen saying you've successfully upgraded to (.3) Hope this helps those stuck with .2
Click to expand...
Click to collapse
I thought I found the patch file but when I followed your instructions exactly it didn't work. Can you please point me to the post with the correct patch file? I'm not rooted and seem to be stuck on 4.06.605.2.
Thanks!!!

I having the same issue. Tried the patch but when it goes to update, bootloader goes from the green to red ! logo. tried to force it by holding the vol up and power but it says error and reboots

In case anybody needs them.
Patch (605.2 to 605.3):
http://android.clients.google.com/p..._WWE_4.06.605.3-4.06.605.2_release_211679.zip
Froyo to GB (605.1 to 605.3):
http://android.clients.google.com/p..._WWE_4.06.605.3-3.26.605.1_release_210690.zip

accord1 said:
I having the same issue. Tried the patch but when it goes to update, bootloader goes from the green to red ! logo. tried to force it by holding the vol up and power but it says error and reboots
Click to expand...
Click to collapse
I also had problems, but followed the instructions in the OP and it worked for me. Do you still have the RUU 605.2 on your SD card? That's the step that I was missing. Also, when I went into HBOOT by holding the volume down, then power button, it immediately read the update.zip (at least that's what it looked like because it did not ask if I wanted to update; went straight to update screen), and after a few automatic reboots, I got the update to 605.3 message.
Finally, just to be clear, I had installed the 605.2 RUU (wasn't and still am not rooted; I have S-ON). Could not get the patch to work. After reading about this method in another thread, I did a factory reset, then removed my SD card, formatted it, put the 605.2 RUU file (renamed PB31IMG.zip) and the 605.2-605.3 patch file (renamed update.zip) on the card. Pulled the battery, re-inserted the SD card, put the battery back in, restarted into HBOOT with the volume down. Hope that helps.

eBalut said:
I also had problems, but followed the instructions in the OP and it worked for me. Do you still have the RUU 605.2 on your SD card? That's the step that I was missing. Also, when I went into HBOOT by holding the volume down, then power button, it immediately read the update.zip (at least that's what it looked like because it did not ask if I wanted to update; went straight to update screen), and after a few automatic reboots, I got the update to 605.3 message.
Finally, just to be clear, I had installed the 605.2 RUU (wasn't and still am not rooted; I have S-ON). Could not get the patch to work. After reading about this method in another thread, I did a factory reset, then removed my SD card, formatted it, put the 605.2 RUU file (renamed PB31IMG.zip) and the 605.2-605.3 patch file (renamed update.zip) on the card. Pulled the battery, re-inserted the SD card, put the battery back in, restarted into HBOOT with the volume down. Hope that helps.
Click to expand...
Click to collapse
Yep did exactly what you did... hboot says updating gift, then goes to green bootloader but then goes imediatly to a red ? not ! so idk whats going on.

accord1 said:
Yep did exactly what you did... hboot says updating gift, then goes to green bootloader but then goes imediatly to a red ? not ! so idk whats going on.
Click to expand...
Click to collapse
Yep, sorry I have no idea other than perhaps one of the files is bad. Maybe try downloading them again?

eBalut said:
Yep, sorry I have no idea other than perhaps one of the files is bad. Maybe try downloading them again?
When I click on the link I get a 404 error so the link isn't working for me... Can someone post up a new one?
Click to expand...
Click to collapse

accord1 said:
When I click on the link I get a 404 error so the link isn't working for me... Can someone post up a new one?
Click to expand...
Click to collapse
I'm too new to post links, but the patch file link is in post #10 of this thread. I will try to post a few more times so I can include the RUU link.

eBalut said:
I'm too new to post links, but the patch file link is in post #10 of this thread. I will try to post a few more times so I can include the RUU link.
Click to expand...
Click to collapse
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.

accord1 said:
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.
Click to expand...
Click to collapse
Ahh, that may be the problem. If you have already upgraded to the 605.2 version of GB (which I assume you did), then you need the 605.2-603.3 patch (renamed to 'update.zip') and the leaked RUU 605.2 file (renamed to 'PB31IMG.zip'), which is not the same as the Froyo to GB file. Again, I don't think I have link privileges yet, but I will try to post the link to the RUU file.
---------- Post added at 08:39 AM ---------- Previous post was at 08:11 AM ----------
Post number six.
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
Post number six
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
Post number six
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
accord1 said:
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.
Click to expand...
Click to collapse
Trying to post RUU link:
http://www.multiupload.com/NJT34T43EK

This update.zip from the tenth post worked!!!!!!!!!!!!!!!! Can't thank all of you enough! Thank you! I knew I was doing it right just wouldn't work with others!
Sent from my ADR6300 using XDA App

accord1 said:
This update.zip from the tenth post worked!!!!!!!!!!!!!!!! Can't thank all of you enough! Thank you! I knew I was doing it right just wouldn't work with others!
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I'm glad to hear that it finally worked for you. And someone was able to help. I was busy the last few days. Don't think I'll be downloading leaked RUUs anymore though. Wish I would have known about not being able to root after the update, although I'm sure someone around here will find a way.

Can someone explain to a somewhat noobie how to get to HBOOT without rebooting the phone?
I understand how to get to HBOOT and understand manually updating to 605.2 first but then I am not clear as to the next step. Once 605.2 is loaded I am not supposed to reboot the phone but go to HBOOT. But doesn't the phone automatically reboot once 605.2 is loaded?
Also, I am trying to clear something up. I am currently on Froyo, non rooted, and having problems with the manual update to GB.
On another forum they are suggesting using this method to update and that is has worked for several people. Will attempting the update this way wipe my phone?

Related

A500 bricked - need help

Hey guys,
a friend of mine has got a problem and I hope you may can help me.
He had 3.2 on his tablet and wanted it to root. So he did the "downgrad method" an everything worked well. Then he flashed the Thor ICS Rom with CWM. Everything was fine, but he wanted to flash antoher ROM.
I don´t know why, but instead of using the CWM full backup he flashed again the "downgrade_not_stable" file.
Now he is stuck on the Android boot screen.
CWM isn´t available anymore, so he can´t flash another ROM.
Is there any option to solve this problem?
Go to settings and then about. Go to system update at the top. This should get him back to stock 3.2/3.2.1.THIS WILL TAKE A WHILE... You will need wifi as it downloads official update.
After getting back to stock 3.2/3.2.1 go to android market and install the acer recovery installer and also install iconia root, you should find both here somewhere.
THEN downgrade to 3.0.1.
Run iconia root, then acer recovery installer (puts cwm back on tab).
Install rom of choice by transferring .zip file onto sd card and booting into cwm.....
At first thanks for your fast answer.
The problem is that he is stuck on boot screen which means he isn´t able to go to any settings. After downgrade from ICS to 3.0.1 not stable, he only sees the Android Boot logo
Sounds like it was a bad rom BAD Download..
You should look at this thread
http://forum.xda-developers.com/showthread.php?t=1307539
is it possible for him to powerdown then hold the volume up button and power buttons at same time to get to recovery? If so maybe he could do that then wipe?
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
erica_renee said:
Sounds like it was a bad rom BAD Download..
You should look at this thread
http://forum.xda-developers.com/showthread.php?t=1307539
Click to expand...
Click to collapse
Erica, i actually think someone updated Gingerbreaker. not sure ifit will help in this situation, but i think it roots the current 3.2.1 version.... could be wrong...
SugarCoatedAngel said:
is it possible for him to powerdown then hold the volume up button and power buttons at same time to get to recovery? If so maybe he could do that then wipe?
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
He does not have access to cwm recovery.
the op flashed a full acer ota rom.. this flashes back the stock recovery.
he has a bad rom file. or something went wrong with the downgrade..
the thread i posted has all the answers.
Timmy Dean did a great job with his flash zip d/load file containing everything needed..
thanks again Timmy . THOU i have never had to use your Stuff.
Click to expand...
Click to collapse
erica_renee said:
SugarCoatedAngel said:
is it possible for him to powerdown then hold the volume up button and power buttons at same time to get to recovery? If so maybe he could do that then wipe?
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
I
HomologousHe does not have access to cwm recovery.
the op flashed a full acer ota rom.. this flashes back the stock recovery.
he has a bad rom file. or something went wrong with the downgrade..
the thread i posted has all the answers.
Timmy Dean did a great job with his flash zip d/load file containing everything needed..
thanks again Timmy . THOU i have never had to use your Stuff.
Click to expand...
Click to collapse
Yeah i used that thread to root, then discovered gingerbreaker had been updated. I wasjust trying to help the guy...
Click to expand...
Click to collapse
never knew there was a new ginger break app for iconia do you have a link.. ???
erica_renee said:
Sounds like it was a bad rom BAD Download..
You should look at this thread
http://forum.xda-developers.com/showthread.php?t=1307539
Click to expand...
Click to collapse
Thank you all!
We will give this a try, even if the Rom he used to downgraded doesn´t seem to be bad. (He allready succsefully used it to downgrade and root from stock rom before flashing ics and doing weird stuff ) But maybe there just went something wrong with the downgrading process. Worth to give this other rom a try.
I have an additional question: Isn´t it possible, that there is a problem with the kernel used with the ics rom and the needed kernel of the downgrade rom?! (sorry i don´t really know about this stuff)
/edit: Ok following problem: USB debugging is not turned on and he can´t turn it on because he is stuck in boot :/
Try holding down power and - volume, when acer logo appears then rock the screen lock button back and forth once. This should clear cache and user data.
Try flashing the 3.0.1 update file again using acer recovery (you might try downloading again in case its a corrupt file) and see if that works.... Then install iconia root and acer recovery installer to root and reinstall cwm.
If this doesn't work, I'm out of ideas....
ultramag69 said:
Try holding down power and - volume, when acer logo appears then rock the screen lock button back and forth once. This should clear cache and user data.
Try flashing the 3.0.1 update file again using acer recovery (you might try downloading again in case its a corrupt file) and see if that works.... Then install iconia root and acer recovery installer to root and reinstall cwm.
If this doesn't work, I'm out of ideas....
Click to expand...
Click to collapse
That sounds like a good idea.... nev3r knew about rocking the lock button..
Read about it lots but never tried it - never had to... At this point you know just as much about it as I do....
Thank you all for your help but nothing worked.
My friend called the Acer support. They said it should be an hardware defect (I don´t really believe it) and they want him to send the tablet to the support to replace it...
Just tell him to use the EUU tool from timmyDean's thread to flash stock rooted 3.2.1 from your PC or use the method 1 downgrade from my signature.
Oh, and he doesn't have a "bad download", and he flashed the same 3.0.1 that worked the first time. The mistake was done when he flashed 3.0.1 over thor's Asus based ROM 3.2.1 making it a mess.

(ota) htc one jb 4.3

OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238
https://mega.co.nz/#!ANlhmBhQ!BO9ITGnJ_K6Gf26K1Pr8kC3ACmAbX96W8EDlau90ZiM
https://docs.google.com/file/d/0Bxcrau9DPUIQWmoyM2tndGQwODQ/edit?usp=sharing
M7_UL_JB43_STOCK_UI_S_Google_WWE_3.06.1700.10 (GOOGLE PLAY EDITION)
http://sync.hamicloud.net/_oops/nenebear59/m5g
GOOGLE PLAY RECOVERY
http://sync.hamicloud.net/_oops/nenebear59/mcn
Files are from the official OTA Server I just shunt doubt continue to wait the official OTA, do not read on need S-OFF to use this method Download NEW hTC one 4.3 update package
OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238cu8fsfggdudctxjr.zip download does not need to unlock, on the phone's internal storage backup with root had to first brush back to the original CWM Recovery
1. the phone off the screen state without waiting for 30 seconds
2. hold the volume down and hold
3. hold the power button for three seconds and then release
4. Wait for the screen turns white and then release the volume down power button one second release
5 Click the volume down to highlight the position to move the figure Recovery and press the power button one second release
6. Wait hold the volume exclamation point on screen appears again hold the power button, release the volume up and power button is released,
7. Double-click the volume down to move the highlight in the figure apply from phone storage location and then one second power key
8 Press the Volume down the highlight moves to the position of the figure 0 and then release the power button one second
9 Click the highlight moves to the next volume in the figure {filename} updates the location and press the power button to put one second On
10 finish and then wait one second to complete the update release the power button
Excuse me.
After I downloaded this 500M+ OTA file via official update, I didn't upgrade right then.
Instead, I searched all directories in my New HTC One, but I couldn't locate where it was.
Does anyone know where the file could be in the smartphone? A million thanks!
OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238cu8fsfggdudctxjr.zip
---------- Post added at 12:13 AM ---------- Previous post was at 12:02 AM ----------
Excuse me.
After I downloaded this 500M+ OTA file via official update, I didn't upgrade right then.
Instead, I searched all directories in my New HTC One, but I couldn't locate where it was.
Does anyone know where the file could be in the smartphone? A million thanks!
OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238cu8fsfggdudctxjr.zip
jimmyjapa said:
Excuse me.
After I downloaded this 500M+ OTA file via official update, I didn't upgrade right then.
Instead, I searched all directories in my New HTC One, but I couldn't locate where it was.
Does anyone know where the file could be in the smartphone? A million thanks!
OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238cu8fsfggdudctxjr.zip
---------- Post added at 12:13 AM ---------- Previous post was at 12:02 AM ----------
Excuse me.
After I downloaded this 500M+ OTA file via official update, I didn't upgrade right then.
Instead, I searched all directories in my New HTC One, but I couldn't locate where it was.
Does anyone know where the file could be in the smartphone? A million thanks!
OTA_M7_U_JB43_SENSE50_MR_hTC_Asia_TW_3.18.709.2-2.24.709.1_release_334238cu8fsfggdudctxjr.zip
Click to expand...
Click to collapse
Check /data/media/0/download
Sent from my HTC Butterfly s using XDA Premium 4 mobile app
daorderdillon said:
Check /data/media/0/download
Check /data/media/0/download
Thank you!
But does it mean that I need to root first?
Click to expand...
Click to collapse
jimmyjapa said:
daorderdillon said:
Check /data/media/0/download
Check /data/media/0/download
Thank you!
But does it mean that I need to root first?
Click to expand...
Click to collapse
I am not sure but next time u download put it to your sd card where u can find it
Click to expand...
Click to collapse
jb 4.3
I downloaded the 4.3 update and tried running it on my fone buy when it starts installing I get an error message: MD 5 not found! What do I do? And the file was fully downloaded cos it's 512.92 in size.
Thanks
Yisheng
yishengee said:
I downloaded the 4.3 update and tried running it on my fone buy when it starts installing I get an error message: MD 5 not found! What do I do? And the file was fully downloaded cos it's 512.92 in size.
Thanks
Yisheng
Click to expand...
Click to collapse
download it again
Deleted
BenPope said:
Deleted
Click to expand...
Click to collapse
what do u mean deleted
daorderdillon said:
what do u mean deleted
Click to expand...
Click to collapse
He posted something and then deleted the post, so since he couldn't delete the post entirely he wrote that.
Never saw that before?
crixley said:
He posted something and then deleted the post, so since he couldn't delete the post entirely he wrote that.
Never saw that before?
Click to expand...
Click to collapse
ok

Found L14 Honor 8 B320 Update... What do I do now?

So, I found the OTA update packages for the FRD-L14 to B320 (and B317)
I really wanted to update... but I'm not sure how.
I'm rooted, with TWRP and SuperSU installed, and it all works ok.
I didn't want to do any hard methods, scared of bricking it. Updating the OTA over SD card isn't working (can't even find the setting)
So what to do?
They are only OTA updates, not Full, so I can't just use dload method to load them up.
I would prefer to keep root, but if I have to reflash to stock, and then re-root, I can do that.
Any other methods I can use? Can anyone with a bit more knowledge help me out?
And of course, more than happy to share the OTA files, one is approximately 3gb (B317) and the other is about 300mb (B320)
Thanks
Unroot phone and flash stock recovery
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
SolarisSixth said:
Will that work? I tried doing that but the updater didn't find the update in the SD card. It told me there were no updates available.
Click to expand...
Click to collapse
what is you full model no ?
FRD-L14C???B???
chongns said:
what is you full model no ?
FRD-L14C???B???
Click to expand...
Click to collapse
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
SolarisSixth said:
L14C567B162
The update seemed to be the right one, whether it actually was or not, not completely sure.
Click to expand...
Click to collapse
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
chongns said:
you need to make sure the zip file you get are the right one.
since your have TWRP, just flash the update.zip and the update_hw_usa.zip Link without reboot in between.
Click to expand...
Click to collapse
I was pretty sure it was the right one, at least it seemed to be. Thanks for the hw_usa.zip file, could you point me towards the correct update.zip?
I flashed the one I had with twrp, but it seemed to fail, and caused a brick. So I wouldn't want to flash the same version, especially since it seemed to not work.
SolarisSixth said:
Thanks, I appreciate the help.
I flashed the update.zip that I found, but it just bricked my phone, I had to flash an older version to get it working.
Would you be able to point me at the correct update.zip? I don't want to try flashing the same one, and having it fail.
Click to expand...
Click to collapse
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
fuyucn said:
You need two roms:
http://update.hicloud.com:8180/TDS/...68/f1/full/hw/usa/update_data_full_hw_usa.zip
AND
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1278/g104/v68368/f1/full/update.zip
Steps:
1. unlock, rooted and twrp
2. then twrp, install the usa.zip, dont reboot
3. flash update.zip (if some errs shows , just miss them.)
Also don't wipe data & cache
4. reboot, if you cannot show correct build num in 'About'
, just use the *#*#2846579#*#*, and use software upgrade to flash update.app from both usa.zip and update.zip.
5. Everything will woke
Click to expand...
Click to collapse
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
SolarisSixth said:
Thanks, gonna give it a try right now. Will report back with results.
I was missing the hw_usa.zip file. As an educational experience, what is that file?
Click to expand...
Click to collapse
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
fuyucn said:
that is honor8's hardware code and support library of Android 7.x. You can understand it as hardware firmware for honor 8. and update.zip is system and software part. In order to make software part works, you need correct hardware firmware.
Click to expand...
Click to collapse
Ahh, that makes perfect sense. Thank you.
I had tried to update it via twrp before, and when that failed, just tried dload method, and neither one worked. I didn't have the hw_usa file.
I appreciate the help, and just running a backup before I go ahead and flash.
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
fuyucn said:
i updated to 5.0 (320) on my L14, i don't suggest you to upgrade if you need Bluetooth. Everything works fine except Bluetooth. And if you need tutorials and all roms, just reply me i will send to you.
Click to expand...
Click to collapse
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
dmband64 said:
Bluetooth is working fine for me on FRD-L14 on B320. That probably means you flashed the wrong file or an incorrect version.
Click to expand...
Click to collapse
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
SolarisSixth said:
Thanks, it worked great! Any tips on how to re-root? I need the new SuperSU version, right?
Click to expand...
Click to collapse
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
Click to expand...
Click to collapse
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
fuyucn said:
Do you use L14C567B320 68368, or others? Could you post the links of HW and update.zip to me?
---------- Post added at 11:58 PM ---------- Previous post was at 11:55 PM ----------
Currently, there is no way to re root and install twrp. there is a post:
http://forum.xda-developers.com/honor-8/how-to/twrp-nougat-edition-t3504140
It shows how to install twrp on 7.0 and root. Not work for me, so i give up this part, just enjoy the original Emui 5
Click to expand...
Click to collapse
Hmm, it seems to have worked for me, but I seem to be running into some issues. It might have failed for me too.
I HAVE to replace some of these default apps. Some of them are truly awful, not to mention I have to uninstall some.
dmband64 said:
I updated through the charles app. I am not rooted with custom recovery. Here is a link to the thread that details how I did it, with the original firmware link for the version I'm on.
http://forum.xda-developers.com/showpost.php?p=70104907&postcount=233
Click to expand...
Click to collapse
thanks, i will try it.
Which TWRP you used for the FRD-L14

Verizon HTC 10 on T-Mobile

So I've spent a good hour searching these threads, and I still can't clear this up. Some people are saying the Verizon HTC 10 doesn't have band 12 at all. Others are saying it does, you just have to s-off to use it. Will my plan enable full compatibility with T-Mobile?
Here's my game plan:
Buy the HTC 10 on Craigslist
Downgrade if needed
Read this thread and hopefully figure out how to s-off with sunshine
Follow these instructions to change the CID
Download the TMUS firmware from the "No Wipe" category of this list, which I conveniently found on this forum that clearly says no CDMA devices
Leave the radios alone, since the firmware from above already contains the TMUS radios?
Reboot and cross my fingers?
Thanks everyone!
I'd just convert to us unlocked
Convertng to US Unlocked is the way to go. Works on ATT. Should work with T-Mobile
Sent from my HTC 10 using Tapatalk
Vindicated777 said:
Convertng to US Unlocked is the way to go. Works on ATT. Should work with T-Mobile
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
aer0zer0 said:
I'd just convert to us unlocked
Click to expand...
Click to collapse
Which RUU did you use? I got mine directly from HTC's website (2.28.617.8) and received error 158. Any tips?
Edit: Also my phone is in the update mode with the picture of the phone and a green circle.... I'm afraid to power off
Also some more info - I was on 1.85.605.9 and downgraded to 1.85.605.8. Then, I used SunShine and got S-off with unlocked bootloader. Next, I tried installing HTC's RUU, which failed.
My plan was to install twrp and supersu after getting the unlocked RUU, but now I'm just stuck.
Thanks in advance
https://forum.xda-developers.com/showpost.php?p=70104011&postcount=3
I wrote this, this will work, just take the OTAs until you get to 2.41
@kmpham1
aer0zer0 said:
https://forum.xda-developers.com/showpost.php?p=70104011&postcount=3
I wrote this, this will work, just take the OTAs until you get to 2.41
@kmpham1
Click to expand...
Click to collapse
Hey! That's the exact post I was following along! Didn't even make the connection - thanks for your help so far. Anyway, I followed your guide until the part you said to download that RUU. I'm on 1.85.605.8, and the one in your link is 1.80.617.1. I was like...ehh better not downgrade, so I used the one from HTC's website. HTC actually gave me a warning (before it died) and said make sure you're updating to an equal or higher firmware. Should I be concerned about using an older one?
Also, flash twrp and supersu before or after receiving otas?
Again, thanks so much for your help! I'm trying my best to search the forums and not ask redundant questions!
aer0zer0 said:
I'd just convert to us unlocked
Click to expand...
Click to collapse
If your SOFF, it doesn't matter. It won't error out
aer0zer0 said:
If your SOFF, it doesn't matter. It won't error out
Click to expand...
Click to collapse
Beautiful! And last question, I (mostly) promise... should I flash twrp and supersu before or after otas?
kmpham1 said:
Beautiful! And last question, I (mostly) promise... should I flash twrp and supersu before or after otas?
Click to expand...
Click to collapse
After, get where you need to be first
aer0zer0 said:
After, get where you need to be first
Click to expand...
Click to collapse
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
kmpham1 said:
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
Click to expand...
Click to collapse
Gonna be a few, camp out for a couple hours
---------- Post added at 03:46 AM ---------- Previous post was at 03:44 AM ----------
kmpham1 said:
It says my device is property of HTC during setup :laugh:
Software updates are downloading though! Thanks again.
Click to expand...
Click to collapse
Also, use magisk instead of supersu you will be able to keep safety
Net passing, and snapchat, plus get root and all the goodies. You will need a custom kernel though
aer0zer0 said:
Gonna be a few, camp out for a couple hours
---------- Post added at 03:46 AM ---------- Previous post was at 03:44 AM ----------
Also, use magisk instead of supersu you will be able to keep safety
Net passing, and snapchat, plus get root and all the goodies. You will need a custom kernel though
Click to expand...
Click to collapse
Uh oh....first ota didn't work. I attached the error.
Any kernel recommendations? I'll take it from the expert lol
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
Click to expand...
Click to collapse
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
Click to expand...
Click to collapse
I just did a plain ol factory reset, but if that still doesn't work, I'll try twrp. Here's the screenshot about the test device message... you think that has anything to do with it?
kmpham1 said:
I just did a plain ol factory reset, but if that still doesn't work, I'll try twrp. Here's the screenshot about the test device message... you think that has anything to do with it?
Click to expand...
Click to collapse
Nah, they are all like that once soff
aer0zer0 said:
Factory reset then try, it maybe bothered from original nougat attempt
---------- Post added at 03:55 AM ---------- Previous post was at 03:53 AM ----------
Actually, I would install twrp, wipe everything, format data, then re-run the ruu
Click to expand...
Click to collapse
Okay so I'm asking cause better safe than sorry. When you say wipe everything... is that the normal data, cahche, and dalvik? Or am I wiping system also cause that's like... woah don't normally touch that lol
System, data, cache, internal SD....basically everything but your external SD. Once wiped, go back to the format data option. Type yes, then reboot to download mode. Run your run from there
aer0zer0 said:
System, data, cache, internal SD....basically everything but your external SD. Once wiped, go back to the format data option. Type yes, then reboot to download mode. Run your run from there
Click to expand...
Click to collapse
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
kmpham1 said:
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
Click to expand...
Click to collapse
Did you try the new one?
---------- Post added at 05:01 AM ---------- Previous post was at 04:57 AM ----------
kmpham1 said:
So I did that and I got the same error as before (error 158), but this time with the older RUU. No clue what to do now, especially cause I wiped system...
Click to expand...
Click to collapse
Are you bootloader locked?

Phone bricked while rooting

So i used this guide to root my phone:
youtube. com/watch?v=AMNVruAU6do
at the end it doesnt installed spuerSU and my phone have bootloop.
then i thought maybe factory reset would help. So i did it, and now i cant acces to my phone at all.
any thoughts?
krullol said:
So i used this guide to root my phone:
youtube. com/watch?v=AMNVruAU6do
at the end it doesnt installed spuerSU and my phone have bootloop.
then i thought maybe factory reset would help. So i did it, and now i cant acces to my phone at all.
any thoughts?
Click to expand...
Click to collapse
Ok, need more info,
What model GRA ???
What Build No. ?
What you have tried since?
If the phone was bootlooping how did you access "factory re-set" ?
Have you done ANY searching/reading to help yourself, not least, even my advice in the post below "P8 Stuck at Boot"?
Have you any experience in flashing this phone or even others?
model GRA-l09
Build emui 4.03
so i used SRKToolHuawei 2.0 and it installed TWRP.
then i rooted, and it went into bootloop. So by this program i enterd TWPR again and did factory reset.
and i tried to reload lastest patch but i got "waiting for device", and its not moving from there.
only used kingroot to root another phone. and i tried looking on other forums for solution but nothing helped.
Have you tried downloading an official ROM, say B999, and putting the "update.app" into a folder on SD card named Dload and rebooting while holding all three buttons?
Have you read my advice here? :-
https://forum.xda-developers.com/huawei-p8/help/huawei-p8-l09-bootloop-trying-to-root-t3695022
ohhhh i will try this option, but first need to get another phone so i can put things on sd card ;/
Sparkrite said:
Have you tried downloading an official ROM, say B999, and putting the "update.app" into a folder on SD card named Dload and rebooting while holding all three buttons?
Click to expand...
Click to collapse
huawei p8 firmeware what should i download?
form here?
http://consumer.huawei.com/pl/support/phones/p8/#software_tool
krullol said:
ohhhh i will try this option, but first need to get another phone so i can put things on sd card ;/
Click to expand...
Click to collapse
Why ?
Have you no PC ?
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
krullol said:
huawei p8 firmeware what should i download?
form here?
http://consumer.huawei.com/pl/support/phones/p8/#software_tool
Click to expand...
Click to collapse
Here is B399 :-
http://huaweifirmware.com/huawei-p8/
Sparkrite said:
Why ?
Have you no PC ?
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Here is B399 :-
http://huaweifirmware.com/huawei-p8/
Click to expand...
Click to collapse
okey it worked and put me into TWRP mode. What i should do next? continue to root?
So i continued to root installed supersu and now my phone is working, but still i dont have root, and i cant find super su app. Anyway thx for help <3
@krullol
If using B399 you MUST use the latest versions of TWRP and SU.
Just follow the instructions in post #1,
https://forum.xda-developers.com/hua...4-0-1-t3431249
TO THE LETTER, using these linked to files (TWRP and SuperSU) and, hey presto, a fully rooted P8.
https://eu.dl.twrp.me/grace/twrp-3.1.1-0-grace.img.html
https://download.chainfire.eu/1220/S...1001224502.zip
PS. Don't forget there is a "Thanks" button.

Categories

Resources