Related
Here is what I had to do. Downloaded the (.2) leaked RUU, put in SD card root dir, and named PB31IMG.zip then downloaded patch (can be found here in forums, or send me a message and will provide) renamed update.zip and put in SD card root dir. Battery pull into bootloader, when asked to complete upgrade hit yes, when upgrade done, DO NOT reboot, go back to bootloader and the update will start. You'll be greeted with a screen saying you've successfully upgraded to (.3) Hope this helps those stuck with .2
This only works if they're still s-off and still have the stock recovery and bloatware.
If I've helped you, hit the thanks button!
AJGO23 said:
This only works if they're still s-off and still have the stock recovery and bloatware.
If I've helped you, hit the thanks button!
Click to expand...
Click to collapse
Not exactly, I was s-on when I did the above. So if you do exactly as I did above it works. I've never been rooted.
Can you get with doug piston on this? He's been looking for a .3 RUU. I don't know if he could patch .2 up to .3 for his uses, but I think he'd be interested.
I will try this tonight and report back. What exactly was updated between the .2 and .3 releases?
Sent from my ADR6300 using XDA App
greatbruce said:
Not exactly, I was s-on when I did the above. So if you do exactly as I did above it works. I've never been rooted.
Click to expand...
Click to collapse
Sorry I completely misread. I was thinking of those that had unrooted for the OTA and only received the .2 update and not the .3, who were both stuck without root and the .2 update. My mistake.
roflhorse said:
I will try this tonight and report back. What exactly was updated between the .2 and .3 releases?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Lots of misc apps and files were unnoticably updated, and the kernel was updated. Also the backlight issue some people had was fixed.
greatbruce said:
Here is what I had to do. Downloaded the (.2) leaked RUU, put in SD card root dir, and named PB31IMG.zip then downloaded patch (can be found here in forums, or send me a message and will provide) renamed update.zip and put in SD card root dir. Battery pull into bootloader, when asked to complete upgrade hit yes, when upgrade done, DO NOT reboot, go back to bootloader and the update will start. You'll be greeted with a screen saying you've successfully upgraded to (.3) Hope this helps those stuck with .2
Click to expand...
Click to collapse
I thought I found the patch file but when I followed your instructions exactly it didn't work. Can you please point me to the post with the correct patch file? I'm not rooted and seem to be stuck on 4.06.605.2.
Thanks!!!
I having the same issue. Tried the patch but when it goes to update, bootloader goes from the green to red ! logo. tried to force it by holding the vol up and power but it says error and reboots
In case anybody needs them.
Patch (605.2 to 605.3):
http://android.clients.google.com/p..._WWE_4.06.605.3-4.06.605.2_release_211679.zip
Froyo to GB (605.1 to 605.3):
http://android.clients.google.com/p..._WWE_4.06.605.3-3.26.605.1_release_210690.zip
accord1 said:
I having the same issue. Tried the patch but when it goes to update, bootloader goes from the green to red ! logo. tried to force it by holding the vol up and power but it says error and reboots
Click to expand...
Click to collapse
I also had problems, but followed the instructions in the OP and it worked for me. Do you still have the RUU 605.2 on your SD card? That's the step that I was missing. Also, when I went into HBOOT by holding the volume down, then power button, it immediately read the update.zip (at least that's what it looked like because it did not ask if I wanted to update; went straight to update screen), and after a few automatic reboots, I got the update to 605.3 message.
Finally, just to be clear, I had installed the 605.2 RUU (wasn't and still am not rooted; I have S-ON). Could not get the patch to work. After reading about this method in another thread, I did a factory reset, then removed my SD card, formatted it, put the 605.2 RUU file (renamed PB31IMG.zip) and the 605.2-605.3 patch file (renamed update.zip) on the card. Pulled the battery, re-inserted the SD card, put the battery back in, restarted into HBOOT with the volume down. Hope that helps.
eBalut said:
I also had problems, but followed the instructions in the OP and it worked for me. Do you still have the RUU 605.2 on your SD card? That's the step that I was missing. Also, when I went into HBOOT by holding the volume down, then power button, it immediately read the update.zip (at least that's what it looked like because it did not ask if I wanted to update; went straight to update screen), and after a few automatic reboots, I got the update to 605.3 message.
Finally, just to be clear, I had installed the 605.2 RUU (wasn't and still am not rooted; I have S-ON). Could not get the patch to work. After reading about this method in another thread, I did a factory reset, then removed my SD card, formatted it, put the 605.2 RUU file (renamed PB31IMG.zip) and the 605.2-605.3 patch file (renamed update.zip) on the card. Pulled the battery, re-inserted the SD card, put the battery back in, restarted into HBOOT with the volume down. Hope that helps.
Click to expand...
Click to collapse
Yep did exactly what you did... hboot says updating gift, then goes to green bootloader but then goes imediatly to a red ? not ! so idk whats going on.
accord1 said:
Yep did exactly what you did... hboot says updating gift, then goes to green bootloader but then goes imediatly to a red ? not ! so idk whats going on.
Click to expand...
Click to collapse
Yep, sorry I have no idea other than perhaps one of the files is bad. Maybe try downloading them again?
eBalut said:
Yep, sorry I have no idea other than perhaps one of the files is bad. Maybe try downloading them again?
When I click on the link I get a 404 error so the link isn't working for me... Can someone post up a new one?
Click to expand...
Click to collapse
accord1 said:
When I click on the link I get a 404 error so the link isn't working for me... Can someone post up a new one?
Click to expand...
Click to collapse
I'm too new to post links, but the patch file link is in post #10 of this thread. I will try to post a few more times so I can include the RUU link.
eBalut said:
I'm too new to post links, but the patch file link is in post #10 of this thread. I will try to post a few more times so I can include the RUU link.
Click to expand...
Click to collapse
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.
accord1 said:
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.
Click to expand...
Click to collapse
Ahh, that may be the problem. If you have already upgraded to the 605.2 version of GB (which I assume you did), then you need the 605.2-603.3 patch (renamed to 'update.zip') and the leaked RUU 605.2 file (renamed to 'PB31IMG.zip'), which is not the same as the Froyo to GB file. Again, I don't think I have link privileges yet, but I will try to post the link to the RUU file.
---------- Post added at 08:39 AM ---------- Previous post was at 08:11 AM ----------
Post number six.
---------- Post added at 08:40 AM ---------- Previous post was at 08:39 AM ----------
Post number six
---------- Post added at 08:40 AM ---------- Previous post was at 08:40 AM ----------
Post number six
---------- Post added at 08:41 AM ---------- Previous post was at 08:40 AM ----------
accord1 said:
So I do still need to have both the froyo to gb update and the .3 patch for this to work correct? I did it that way everytime last night just making sure that is still right.
Click to expand...
Click to collapse
Trying to post RUU link:
http://www.multiupload.com/NJT34T43EK
This update.zip from the tenth post worked!!!!!!!!!!!!!!!! Can't thank all of you enough! Thank you! I knew I was doing it right just wouldn't work with others!
Sent from my ADR6300 using XDA App
accord1 said:
This update.zip from the tenth post worked!!!!!!!!!!!!!!!! Can't thank all of you enough! Thank you! I knew I was doing it right just wouldn't work with others!
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I'm glad to hear that it finally worked for you. And someone was able to help. I was busy the last few days. Don't think I'll be downloading leaked RUUs anymore though. Wish I would have known about not being able to root after the update, although I'm sure someone around here will find a way.
Can someone explain to a somewhat noobie how to get to HBOOT without rebooting the phone?
I understand how to get to HBOOT and understand manually updating to 605.2 first but then I am not clear as to the next step. Once 605.2 is loaded I am not supposed to reboot the phone but go to HBOOT. But doesn't the phone automatically reboot once 605.2 is loaded?
Also, I am trying to clear something up. I am currently on Froyo, non rooted, and having problems with the manual update to GB.
On another forum they are suggesting using this method to update and that is has worked for several people. Will attempting the update this way wipe my phone?
UPDATED 3/17/15 - Added OB7 tar
I didn't see a decent link to the stock NIE/NK2/OB7 tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1BOB7 tar - https://www.androidfilehost.com/?fid=95916177934542777
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1BOB7_N910PSPT1BOB7_SPR.zip, you'll have a file called N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1BOB7_N910PSPT1BOB7_N910PVPU1BOB7_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Old TARs
N910PVPU1ANK2 tar - https://www.androidfilehost.com/?fid=95853297432265112
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Thanks for this my man
Thank you sir.
This will come in handy so many times to so many people out here. Thanks.
I've been looking for a decent mirror forever. Thanks!
darshiki said:
I've been looking for a decent mirror forever. Thanks!
Click to expand...
Click to collapse
I'm a bit hurt, what was wrong with mine?
Thank you Sir
shabbypenguin said:
I'm a bit hurt, what was wrong with mine?
Click to expand...
Click to collapse
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
There's a few already, in general where these threads belong. Moving this there.
-viperboy- said:
Oops, sorry shabby! If you had one, I didn't see it. You didn't have a thread for it, right? Cause I looked and didn't see one.
Click to expand...
Click to collapse
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Will this wipe me to a clean slate
leandrae400 said:
Will this wipe me to a clean slate
Click to expand...
Click to collapse
Yes it will give you a fresh clean roms it but everything back to stock no root... But if u are rooted and do this it still doesn't zero out your Knox being tripped if u did root ur phone my on the thanks I hit the wrong button
Sent from my SM-N910P using Tapatalk
shabbypenguin said:
Oh i didnt have a thread for it, just mentioned a few times through various other threads that talked about getting the stock tar.
Click to expand...
Click to collapse
Ah, the good old days of the T-Mobile CF-Auto-Root It feels like so long ago...lol.
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior rom
---------- Post added at 02:51 AM ---------- Previous post was at 02:36 AM ----------
I only ask cuz i got a force close on set up. Even after i did a master clear
-viperboy- said:
I didn't see a decent link to the stock NIE tar that wasn't on rapidgator or similar crappy site, so I uploaded it to AFH.
Required Files
N910PVPU1ANIE tar - https://www.androidfilehost.com/?fid=95784891001612590
Samsung USB Drivers - https://www.androidfilehost.com/?fid=95784891001612594
Odin - https://www.androidfilehost.com/?fid=95784891001612591
How to Flash
Install Samsung USB Drivers (if you haven't already)
Unzip N910PVPU1ANIE_N910PSPT1ANIE_SPR.zip, you'll have a file called N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5
Unzip Odin-v3.07.zip
Right-click on Odin3-v3.07.exe > Run as Administrator
Reboot your phone into Download mode - Power off, then press and hold Power + Home + Volume Down. Press Volume Up when you see the warning screen
Click on the PDA button and pick the N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 file, wait until Odin says that the MD5 was checked successfully
Click Start
Once finished, you'll be back to stock. This WILL NOT reset the KNOX Warranty flag if you've rooted, it will only put you back to the stock ROM/recovery/firmware. Enjoy
Click to expand...
Click to collapse
Is this supposed to format the phone. I flashed and everything went great however it did not format the phone. Is left all the information in prior
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
sliverr7x said:
Nope u have wipe everything manually this just gets u back to true stock form
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
rcmartin57 said:
Thanks for the info. Do youbthink this isnthe reason i get a foreclose on mobile service everytime and sprint zone shows on the notification screen frozen at 97%. I have to forceclose the app to get it to go alway
Click to expand...
Click to collapse
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
tx_dbs_tx said:
This happens on a brand spanking new Sprint note 4 right out of the box. I know this because when me and my wife got our new phones at a corporate Sprint store the sprint installer "stopped working" on first boot when they were activating our phones and turning them on for the first time. This is caused by the way they have these installer/preload apk's in the rom and the fact that the installer has to contact the network and actually download files during setup. This is NOTHING to worry about. Simply reboot your phone a second time and the sprint configuration installer will initialize and do it's thing. This is jst a little quirk but I've seen on on stock unrooted phones and rooted phones exactly the same.
Click to expand...
Click to collapse
Thanks forbyhe insight. Knowing this i flashed this rom and everything is running smoothly
Hello, first I want to say that I'm ****ing scared.
My new LG Leon (LG H340N) has bricked ... I root it and now It's stuck at boot logo.
It's there any way to recover him to life ? I have this phone about 5-6h and now It's ****ed up...If you can help me I will be gratefull.
Please, anyone have the .kdz file or .TOT ? I'm disperate.PLEASE
MurdockGrafix said:
Hello, first I want to say that I'm ****ing scared.
My new LG Leon (LG H340N) has bricked ... I root it and now It's stuck at boot logo.
It's there any way to recover him to life ? I have this phone about 5-6h and now It's ****ed up...If you can help me I will be gratefull.
Click to expand...
Click to collapse
Can u please tell me how you rooted your lg leon cause i wanna root it too but i cant find any way
Hello,
The following should work:
1) turn of the phone completely
2) do hard reset ( http://www.recovery-mode.com/android/lg-leon-4g-lte-h340n.html )
The phone will be reset to like when you bought him. This means you will lose every app etc. but at least he will work again
Hit thanks pleas
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
Xenzo33 said:
Can u please tell me how you rooted your lg leon cause i wanna root it too but i cant find any way
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
louis-JYG4t said:
Hello,
The following should work:
1) turn of the phone completely
2) do hard reset ( http://www.recovery-mode.com/android/lg-leon-4g-lte-h340n.html )
The phone will be reset to like when you bought him. This means you will lose every app etc. but at least he will work again
Hit thanks pleas
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
try this http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Click to expand...
Click to collapse
ok i will try i hope it works cause i wanna use foldremount :/
---------- Post added at 01:40 PM ---------- Previous post was at 01:24 PM ----------
louis-JYG4t said:
Hello,
The following should work:
1) turn of the phone completely
2) do hard reset ( http://www.recovery-mode.com/android/lg-leon-4g-lte-h340n.html )
The phone will be reset to like when you bought him. This means you will lose every app etc. but at least he will work again
Hit thanks pleas
---------- Post added at 03:22 PM ---------- Previous post was at 03:18 PM ----------
try this http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Click to expand...
Click to collapse
i cant get in download mode any sugestions?
Xenzo33 said:
ok i will try i hope it works cause i wanna use foldremount :/
---------- Post added at 01:40 PM ---------- Previous post was at 01:24 PM ----------
i cant get in download mode any sugestions?
Click to expand...
Click to collapse
1) Turn off the device
2) Press and hold Volume Up key + Power key about 5-8 seconds
3) Connect USB Cable when still pressing these buttons
4) Release all key when Download Mode appears
louis-JYG4t said:
1) Turn off the device
2) Press and hold Volume Up key + Power key about 5-8 seconds
3) Connect USB Cable when still pressing these buttons
4) Release all key when Download Mode appears
Click to expand...
Click to collapse
i ised that but it got me on my phone not on download i cant also get in recovery mode :/
Xenzo33 said:
i ised that but it got me on my phone not on download i cant also get in recovery mode :/
Click to expand...
Click to collapse
hm that's weird.. anyway let's try it another way then
1. Download Super-Root.apk for LG Leon from this link : Download or http://downloadsafe.org/file/0yF980
2. Connect your device to your PC using the USB cable.
3. Copy the Super-Root.apk over to the root of your SD card.
4. Once it’s been copied, disconnect your device from your PC.
5. Head to Menu>>Settings>>Security on your device and enable the Unknown sources option.
6. Open the File Manager app on your device and install the app you copied earlier to your device.
7. Once the app’s been installed, launch it from your App Drawer.
8. Select Install SuperSU from the first dropdown menu.
9. Select exploit, tap on it in the app.
10. The app should begin rooting your device, shouldn’t take too long to finish.
11. Reboot your device once it’s been rooted.
12. You’re all done! Excellent! You’ve successfully rooted your Android device using the Super-Root.apk app and you should now be able to see the SuperSU app in your App Drawer!
louis-JYG4t said:
hm that's weird.. anyway let's try it another way then
1. Download Super-Root.apk for LG Leon from this link : Download or
2. Connect your device to your PC using the USB cable.
3. Copy the Super-Root.apk over to the root of your SD card.
4. Once it’s been copied, disconnect your device from your PC.
5. Head to Menu>>Settings>>Security on your device and enable the Unknown sources option.
6. Open the File Manager app on your device and install the app you copied earlier to your device.
7. Once the app’s been installed, launch it from your App Drawer.
8. Select Install SuperSU from the first dropdown menu.
9. Select exploit, tap on it in the app.
10. The app should begin rooting your device, shouldn’t take too long to finish.
11. Reboot your device once it’s been rooted.
12. You’re all done! Excellent! You’ve successfully rooted your Android device using the Super-Root.apk app and you should now be able to see the SuperSU app in your App Drawer!
Click to expand...
Click to collapse
This is a fake site all of its content are fake because you need to complete a survey that gets you nothing
Xenzo33 said:
This is a fake site all of its content are fake because you need to complete a survey that gets you nothing
Click to expand...
Click to collapse
oh excuse me! :s
well I'll provide you with another one and try it first before posting... Will do it this evening or so, got not so much time at the moment
louis-JYG4t said:
oh excuse me! :s
well I'll provide you with another one and try it first before posting... Will do it this evening or so, got not so much time at the moment
Click to expand...
Click to collapse
i had tried the same site on my dell venue 7 for 5.0 update :/
---------- Post added at 05:15 PM ---------- Previous post was at 04:40 PM ----------
louis-JYG4t said:
oh excuse me! :s
well I'll provide you with another one and try it first before posting... Will do it this evening or so, got not so much time at the moment
Click to expand...
Click to collapse
i tried it with my tablet but it didnt work i tried to upgrade it to 5.0 anyway..
so for lg leon i have tried
SRS root [Says root complete but no root perm]
OneClickRoot [says works but costs 40$]
Kingo root [Stucks Looping]
Baidu Root [Chinese i dont even know what to do]
Frama root [Doesnt Work for my phone]
is your bootloader unlocked?
louis-JYG4t said:
is your bootloader unlocked?
Click to expand...
Click to collapse
my bootloader is locked cause i cant even get in recovery how to open my bootloader?
Xenzo33 said:
my bootloader is locked cause i cant even get in recovery how to open my bootloader?
Click to expand...
Click to collapse
help please how to unlock lg leon's bootloader?
wait I think I found another way
try this guide: http://www.smartphoneclinics.com/easy-root-lg-leon-4g-lte-h340n/
Your phone will automatically go into download mode and its not so much work.
On the end of the post there's a video to explain what you have to do if you don't understand somthing
I think I deserve a Thanks :angel:
louis-JYG4t said:
wait I think I found another way
try this guide: http://www.smartphoneclinics.com/easy-root-lg-leon-4g-lte-h340n/
Your phone will automatically go into download mode and its not so much work.
On the end of the post there's a video to explain what you have to do if you don't understand somthing
I think I deserve a Thanks :angel:
Click to expand...
Click to collapse
You deserve a like i used the guide above How to root any lg phone and it worked i got in download mode with phone off vol + and usb plug i have my phone rooted thanks man also made a small [Q] here:
http://forum.xda-developers.com/general/help/lg-leon-root-t3102456
Hello,
I'm a little out of topic but I'm intrusted in the phone I have found mixed specs.
so i have a few questions:
1. How is the phone in general?
2. is there a micro SD slot?
3. Is the camera 5 or 8 mega pixel?
4. is the battery removable?
Thank you very much!
-Adam Ericson
adamdbz said:
Hello,
I'm a little out of topic but I'm intrusted in the phone I have found mixed specs.
so i have a few questions:
1. How is the phone in general?
2. is there a micro SD slot?
3. Is the camera 5 or 8 mega pixel?
4. is the battery removable?
Thank you very much!
-Adam Ericson
Click to expand...
Click to collapse
As i said is good and has sd card slot it has 5mp camera and a 3mp one also battery is removable ?
Well i try kingoroot for my LG LEON H340C and worked try it too!
kingo bricked me... king root and then SUPER SU ME worked for me
This thread is to list the current and upcoming Over The Air(OTA) updates for Moto G XT1550 Indian Version.
Currently there are two version of Lollipop 5.1.1 OTA for XT1550 with Build numbers LP123.72-33 and LP123.72-47.4
Any one captured the OTA for the latest build LP123.72-47.4 can share the links so that we no need to wait for it... The latest update supposed to fix the stagefright issue along woth some stability improvements.
Procedure to update your phone with OTA:
Method 1:
1. Download the OTA file to your phone's SD card root folder.
2. Go to Settings-> About Phone -> System Update
3. Follow the instructions for the update. (NOTE: If the OTA file update is not the latest or is same as current, you will not be able to do any thing and it will show that your device Software is up to date.)
Method 2:
1) Download ***Latest*** 6.0 OTA for XT1550 --->here
2) Copy it to sd card
3) Power off phone
4) Press Volume Up+Down and Power Key for around 5 seconds.
5) Scroll Up/Down using Volume key and go to recovery
6) You will get a no command message
7) Press Power + Volume Up together for 1-2 seconds
8) Go To Cache Clean
9) Wait for 20-30 minutes
10) After process done, click on update from sd card
Download Links
5.1.1 OTA for XT1550 (Build LPI23.72-47.4)--->here
5.1.1 OTA for XT1550 (Build LPI23.72-XX.X) --->here
***Latest*** 6.0 OTA for XT1550 --->here
Credits:
@asrupesh
:good::good::good::good::good:
OTA capturing methods.
How to capture OTA with root:
1. After getting OTA notification, start the download.
2. After download is complete (do not install the update now), just open any root explorer (I recommend ES file explorer) and go to the /cache directory or /data/data/com.motorola.ccc.ota/ on the device root.
3. You can see the downloaded OTA file with name like Osprey_retasia_ds_2gb.XXXXXX.zip, copy this file to SD card and then to your computer.
4. Upload the OTA file to file sharing site and post the link.
How to capture OTA without root:
Follow the instructions from here to capture OTA without root -----> http://forum.xda-developers.com/moto-g/general/capture-ota-root-t2969602
stagefright update
After downloading the update (and not installing it), i opened root explorer in es file explorer, and opened /cache, i couldn't find the update in that folder. Rather I was not able the find the update zip file anywhere.
Same Here i cannot locate the OTA file in the Catch Folder. I updated my Moto g3rd gen XT1550
and the new System version is
23.46.4.osprey_retasia_ds_2gb.retasia.en.03 retin
And the New Build Number LPI23.72-47.2
I found a zip file of 177mb at /data/data/com.motorola.ccc.ota/ in that the file named Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03.zip
.....is this what you need..
asrupesh said:
I found a zip file of 177mb at /data/data/com.motorola.ccc.ota/ in that the file named Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03.zip
.....is this what you need..
Click to expand...
Click to collapse
yes the OTA should be of 177.4 MB, but just confirm the name... it should be Blur_version.23.46.4.osprey.XXXX ... upload it to file sharing site and PM me the link.
I got the update notification which included stagefright fix as well as some camera fix... I downloaded the OTA (about 170MB). My phone was rooted with the stock recovery. I went ahead and installed. It told me it will take about 10 minutues. The phone rebooted and installed the OTA and restarted once. It again restarted one more time but will not complete the process. I now see a screen with a blank display. Been like this for more than 10 minutes. Nothing happening. Any ideas? How can I force shut down and restart...?
coolmalayalee said:
I got the update notification which included stagefright fix as well as some camera fix... I downloaded the OTA (about 170MB). My phone was rooted with the stock recovery. I went ahead and installed. It told me it will take about 10 minutues. The phone rebooted and installed the OTA and restarted once. It again restarted one more time but will not complete the process. I now see a screen with a blank display. Been like this for more than 10 minutes. Nothing happening. Any ideas? How can I force shut down and restart...?
Click to expand...
Click to collapse
Press powerbutton and hold untill it shutsdown and then restart it by pressing power button again...
pawankonjarla said:
yes the OTA should be of 177.4 MB, but just confirm the name... it should be Blur_version.23.46.4.osprey.XXXX ... upload it to file sharing site and PM me the link.
Click to expand...
Click to collapse
but it shows this version only... Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03
pawankonjarla said:
Press powerbutton and hold untill it shutsdown and then restart it by pressing power button again...
Click to expand...
Click to collapse
When I do that the phone shuts down... but before I could press the power button again it boots automatically and I see the initiation motorolla boot image.. after two initial images the phone is agin giving me a blank display.. should I not have done an OTA when my phone was already rooted? What else can I do? Thanks for your help.
asrupesh said:
but it shows this version only... Blur_Version.23.31.33.osprey_retasia_ds_2gb.retasia.en.03
Click to expand...
Click to collapse
ok..just share it.. lets figure out what exactly it is.
I am able to boot into flash mode.. Under software status it say "Modified".. Is there anything I can do through ADB or something to restart the phone? Or can I rollback the last OTA?
coolmalayalee said:
I am able to boot into flash mode.. Under software status it say "Modified".. Is there anything I can do through ADB or something to restart the phone? Or can I rollback the last OTA?
Click to expand...
Click to collapse
What is your exact requirement? DO yyou want to install the latest OTA? What is your device status? Locked bootloader/unlocked? root/no root?
Be specific so that we can quickly answer your issues.
coolmalayalee said:
When I do that the phone shuts down... but before I could press the power button again it boots automatically and I see the initiation motorolla boot image.. after two initial images the phone is agin giving me a blank display.. should I not have done an OTA when my phone was already rooted? What else can I do? Thanks for your help.
Click to expand...
Click to collapse
If your phone is rooted or having unlocked bootloader you can supposedly install OTA. OTA works only woth stock recovery (which comes with Motorola) ....
pawankonjarla said:
What is your exact requirement? DO yyou want to install the latest OTA? What is your device status? Locked bootloader/unlocked? root/no root?
Be specific so that we can quickly answer your issues.
Click to expand...
Click to collapse
My bootloader is unlocked and the phone is rooted with stock recovery. .
I tried installing the OTA. It seem to have installed the OTA. However, the phone is now not restarting. Looks like a boot loop.
when I press the volume down for few seconds the phone shuts down... but it automatically restarts. But does not go beyond the initial two-three screens and then displays a blank display. I am able to get into flash mode.. but the device is not being recognized...
what to do to come out of this situation...
pawankonjarla said:
ok..just share it.. lets figure out what exactly it is.
Click to expand...
Click to collapse
Uploading
coolmalayalee said:
My bootloader is unlocked and the phone is rooted with stock recovery. .
I tried installing the OTA. It seem to have installed the OTA. However, the phone is now not restarting. Looks like a boot loop.
when I press the volume down for few seconds the phone shuts down... but it automatically restarts. But does not go beyond the initial two-three screens and then displays a blank display. I am able to get into flash mode.. but the device is not being recognized...
what to do to come out of this situation...
Click to expand...
Click to collapse
OK.. I can only think of flashing the stock firmware image now If you can able to go to flash mode ...
pawankonjarla said:
OK.. I can only think of flashing the stock firmware image now If you can able to go to flash mode ...
Click to expand...
Click to collapse
I can get to flashmode... however, on ADB terminal, it is not showing any devices.. That means I cant flash the stock firmware image... isnt it?
coolmalayalee said:
I can get to flashmode... however, on ADB terminal, it is not showing any devices.. That means I cant flash the stock firmware image... isnt it?
Click to expand...
Click to collapse
Ok.. let this thread be clean.. it is going off the topic.. Share your questions in Q&A section...
pawankonjarla said:
Ok.. let this thread be clean.. it is going off the topic.. Share your questions in Q&A section...
Click to expand...
Click to collapse
Sorry about that.. will post in Q&A. Thanks for your help.
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Same here, no solution found ATM :/
I-Immortal said:
Same here, no solution found ATM :/
Click to expand...
Click to collapse
You guys should report all bugs to the cyanogenOS forum here -> http://community.cyngn.com/c/devices/z1
If they don´t know about the bugs, they can´t fix it.
And while you are at it raise your voice here (because we need inbuild root ) -> http://community.cyngn.com/t/reques...ring-and-inbuilt-superuser-access/97/4?u=othe
Wow nice thank you ! I didn't know where the official support was ^^
U touch buttons not funtioning
Pontifex007 said:
Last night my Zuk prompted a CyanogenMod update , which I installed. Now, the back function of the home button (by just touching it, not pressing) doesn't work anymore. Any ideas on how to fix this ?
Click to expand...
Click to collapse
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Sydarij said:
Any idea will factory resetting get the u touch buttons to work? Or are u waiting for an update?
Click to expand...
Click to collapse
I dont think resetting will help. I'm just waiting till the next update, or the big update to 6.0 Marshmallow early next year. Really weird that they haven't fixed it yet, shouldnt be that difficult..
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back. https://www.androidfilehost.com/?fid=24269982087008212
MrColdbird said:
They dummied it out on the fingerprint_client and kernel binary... I've been tracking this issue down all day already. Theoretically, swapping the zImage for an older one, along with an older fingerprint_client binary should fix the issue.
Edit: Got it running on the latest COS again after a few patches here and there... will post a flashable boot.img soon.
Edit2: Here you go, all patched up and ready to go. Just flash it via fastboot and you will get your back-button functionality back.
Click to expand...
Click to collapse
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Gabriü said:
Thanks! Do you know if this will work with CyanogenMod? Not CyanogenOS
Click to expand...
Click to collapse
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Sydarij said:
should we wait for an update? there's not one issue im facing with the zuk z1. there are many like:
-the back button on the home key soft touch is not working
-the capacitive touch button on the left is much brighter than the right one hence not equal
-the swipe right or left to switch b/w apps on the home key is not working
Click to expand...
Click to collapse
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
U touch soft touch button not working
Gabriü said:
I don't know, I personally believe that they removed the feature on purpose because I was able to use it when I first bought the phone..
Click to expand...
Click to collapse
they have removed it... im still waiting for an update. pretty frustrated they removed it so early when i just bought it a week ago! Arghhh!
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
MrColdbird said:
Just use the boot image I've posted to temporarily restore it.
The OnePlus 2 kernel sources contain a patched fingerprint driver that is compatible with the Z1 that contains the capacitive navigation that got stripped.
It's already being picked up / ported for the Chroma kernel so don't worry guys, on the long run we will get this feature back permanently (no matter what Cyanogen wants).
Click to expand...
Click to collapse
I can't answer on the official thread as I don't have more than 10 posts, anyway, thanks for the feature, I tested it on CM12.1-Nightly and it works like a charm! Unfornately i noticed that after flashing the zip, on "buttons" settings, the "enable on screen nav bar" option has disappeared, and I can't go turn them off. Also the functionality is not the same as when i bought it, in fact if I touched the button, it would use the back feature instead of going on the home screen.
Anyway, thanks again!
You can adjust the actions that occur by editing the Generic.kl file included with the installer zip file. Adjust them as needed / wanted.
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
Gonzaman said:
Hi , thx alot for ur patch .
Got some questions :
1. How can i programm button myself ?
2. How can i uninstall that patch ?
Click to expand...
Click to collapse
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
sadrettin said:
MrColdbird
thank you very much. finger prints sensor works as back button again. great job.
---------- Post added at 09:25 PM ---------- Previous post was at 09:21 PM ----------
You can use 3rd party programs from playstore. for example"flashify". save the patch to internal store by usb. install flashify. find the path of yog4pas3oh....img and set up. after reboot it will work. Also you can unistall it from setting/ applications
Click to expand...
Click to collapse
install it on your zuk and try to uninstall it by your ways .
zuk z1 home button issue
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Sydarij said:
please can u help me to flash my device. im doing it for the first time.. i have installed flashify from playstore.. now can u tell me what to do step by step. thanks!
Click to expand...
Click to collapse
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
sadrettin said:
Hi,
1- plug your usb cable to your pc.
2- download the file "YOG4PAS3OH_backbuttonenabled_boot.img" which uploaded by MrColdbird.
3- copy the file to zuk z1s internal store.
4- open flashify. choose "recovery image", choose file manager, find and choose the "YOG4PAS3OH_backbuttonenabled_boot.img"
5-program asks you flash recovery? and choose YUP.
6- after rebooting your touch backbutton will work with permission of God.
But I offer another upload of Mrcoldbird. Because extra properties come by it.
" Left swipe: Back
Right swipe: Recent Apps
Tap: Home"
http://forum.xda-developers.com/zuk...rint-touch-t3262388/post64128662#post64128662
Click to expand...
Click to collapse
Flashify keeps crashing on my Zuk.. weird !