Hi guys,
my ipaq 6915 starts and hangs on white screen ??
what is the way to fix it and is there a flashing procedure? I am brand new with such a device.
Thanks for your help in advance.
Just to add that this device doesn't respond to hard reset either. Would a ROM update fix this or is there an easier way to get it working?
Hi to all professionals... i would seriously need your pro advise and comment how to resolve my phone problem.
i have recently bought a used HP ipaq 6965 however i have encounter some serious problem when i tried to upgrade the Rom to latest firmware.
The latest firmware is 1.21 from HP official. Here's the symptoms of my phone:
1) It keep on remain in HP startup screen (booting always)
2) Boot loader mode is accessible
3) USB is recognize and detected by windows XP
4) Soft and Hard Reset could be apply
5) update successfully wireless Rom by HP tool even the phone can only switch from HP startup screen and Boot loader screen
PRoblem:
1) active sync could not detect my phone no matter what i have tried.
2) How can i fix this non-detected device problem?
3) How can i re-upgrade my Rom if i could not connect phone thru my PC?
4) Is that any available solutions for me to upgrade and solve the problem
Thanks is advance.
Best Regards,
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye
In my HP was problem with RADIO. I want repair this problem and i write "P10504_BT_HP_Radio_Patch". On screen displaied HP logo and vG. 39 (light is off) and computer show error 605. Now when i want write any ROM to my devince computer show this error again. I was trying write Orange rom (hw6915_up_2_french(Orange)_flasher) and english ROM (G3 DEVICE ONLY hw6915-1.21uk) but this not help me. Now when i power on my HP on screen is HP logo and vG. 39(bootloader) again. Sorry for my bad english and i think that you help me
In MMTY.exe i do "task 28 55aa" end now when i power on my HP LCD is black but when i do bootloader mode i see "serial" and vG 3.9 (my phone is g3 or g4?) When i writing new rom in bootloader mode computer show error;/ Maybe i have CID lock ?? How i unlock my phon ?? Please help me In this site: "http://forum.xda-developers.com/showthread.php?t=471942" is manual but i need rom G4 and i have G3 only ;/ )
helllo
just add me to your yahoo messenger list :cata_cata_cs. i cand help you restore the hp..but unfortunately i can't make it work as a phone. only pda and gps
hw6915 german to spanish problems
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]
help me please...... my hp ipaq 612c had a big problems
after i flash sp43434 the screen when black
cannot enter bootloader, usb not working
cannot flash new rom
cannot do anything with the phone
pleaseeeeeee help me!!!!!!!
try dnw to flash