Hi guys,
my ipaq 6915 starts and hangs on white screen ??
what is the way to fix it and is there a flashing procedure? I am brand new with such a device.
Thanks for your help in advance.
Just to add that this device doesn't respond to hard reset either. Would a ROM update fix this or is there an easier way to get it working?
Related
I have qtek2020i and i tried to update it with some himalaya rom. So now my device is death. Could somebody please help me to find any rom for qtek 2020i that will help me to revive my device to start working again. Tnanks in advance
Marko
[email protected]
Re: Rom for 2020i
Hi,
This post has the info you need.
http://forum.xda-developers.com/viewtopic.php?t=27676
still not working
Thanks for help I downloaded both files ant tried with mautupgrade_noid twice as it says but still get a probblem with upgrade starting. When stage1 of upgrading starts with "erasing old ro" it stays on 0% and don't want to start erasing. after few minutes show error and says reset and repete. Is there any help or experiance. My qtek 2020i stills dead
fine
I did solve my problem with few trials with maupgrade_noid from magicians ftp site. Thank You a lot onse again for the help
Marko
It was a pleasure to help, glad your PDA is working again. Makes you sweat when you hold an expensive dead lump of metal.... LOL :lol:
DAz
Hi need some help! i changed my qteck s200 to dopd rom and now i want to get back to the qtek rom but its not letting me, it keeps coming up with errors!
Any help would be great!
and does anyone know if changing the rom of your devise to one which is different, voids your warenty!
http://forum.xda-developers.com/viewtopic.php?t=52244
oh NNNNNNNNNNNOoooooooooo
I just went through that link you gave me and followed the 10 steps it completed the first step and when it said to soft re-set i done it and my phone just does not load it stops at the dopod enjoy mobility sign!!
i have tried hard reset too and nothing works
Help help help!!
what shall i do??
Hi
Could anyone help? Please .....!!
My 6915 is showing a screen with Serial at the top, HP logo in middle and VG. 39 at the bottom.
Tried to do a hard restart........ all it says clearing OK as long as i hold the buttons and when i let it go .... abck to the above screen.
Anyone ..........any ideas.....
I am
http://forum.xda-developers.com/showthread.php?t=309357
or try this
http://rapidshare.com/files/79967276/_EXE_ROM_FOR_G3_DEVICE_ONLY.rar.html
http://rapidshare.com/files/79965670/_EXE_ROM_FOR_G4_DEVICE_ONLY_.zip.html
good luck
good luck..
u 6915 stucked in bootloader mode..now get appropriate rom upgrade and flash it..then only it will work..
Thanks....
Thanks a lot
First it won't load , but at the end it did work
Cheers
6915 phone problem
Thanks for help to get out from from the bootloader mode but now after restarting, it is saying no GSM during startup and the phone stop working... anyone help
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Your phone can be reflashed with Mtty even when it freeze on the boot screen cause its not necesary have the phone ON.
Tried to do a hard reset maybe is a windows registry problem.. after the hard reset the values on registry will be reset to default.
already done that, and doesnt work, even it reflashes through USB but afther reaching 100% the phone restarts and get stuck again in the same place, no matter if I hard Reset or reflash by USB the phone still get freeze.
can any one tell me how to delete all the data on the memory to make a clean reflash? or how do I reupload the firmware? is there a way to recover the phone?
remember I already install the WM5 and back to WM2003SE but after that the problem started, maybe i screw someting wile doing it?
Solaris_irc said:
my sp3i is stuck on the WM splashscreen and afther that it just turn off, i'v installed WM5 and then back to the original WM2003SE from imate but after a while it just begun to do that, plz help me.
does any one know how to make a reflashing throw SD? can anyone make a guide? plz helpme to revive my dear phone.
thanks in advance.
Click to expand...
Click to collapse
Tutorial for sd flash
Check here
Dear friends:
I hope you can help me with my problem. I have a wizard (K Jam), G3 using TauRho 5.1 WM6 rom. The thing is that my phone´s send button doesnt work. Two days ago I was instaling one trial and when i tried to get the back up, it hangs while booting and never recover. The problem is: I need to hard reset and the final button is not usefull to confirm de secuence.
Does anybody knows the way out?
Thanks and sorry for my poor english