Database Users

F'd up my vibrant i could use some help!!

hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......

there was a thread about that issue, turn off your phone, unplug the usb cord, plug the usb cord. hold vol up and vol down and the power button. it will come on but when it goes off release the power button and keep holding down the vol up and vol down. should go into auto download mode. then u can reload it via odin.

xsilvercivicx said:
hi guys... so i don't know how i got this vibrant soooooo far gone .. im afraid i have gotten it too far...
i was doing a odin back up and odin froze!... i did nothing for hours!!!! finally i shut off the program.... the phone rebooted into a screen with a picture of a phone with a triangle then dots to a computer!!!
omg!!! so im freaking out.. anyone know if there is a way back from this?? i can't even get back into recovery mode!!
please any help will do......
Click to expand...
Click to collapse
this is normal just continue to download mode as normal.

http://forum.xda-developers.com/showthread.php?t=741027

you can save your device through odin, plug your phone in to your computer and try to go into download mode may take a couple tries, and flash the stock ROM you can find on these forums

i have already tried the sequence to get it into download mode... it doesnt work... tried adb and nothing registers....
anymore ideas? looks like im going to have to do a warranty exchange.

The only way I can reliably get to download mode is: power off, remove battery, replace battery, hold both vol buttons, plug in usb. works every time though.
Sent from my SGH-T959 using XDA App

update
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?

Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out

sorry
hey guys thanks for all the help and suggestions... at first i just thought i would post in a development sections for some reason that made sense to me.. and im sorry if i posted in the wrong section....

xsilvercivicx said:
ok so that actually worked!!!! i pulled the battery ... pluged the usb cable in and while holding volume up and down buttons i forced the battery in.. and now its in download mode!!!!
now here is my next road block.. whenever i tried to use odin i cant get pass that file analysis part and nothing happens..
any ideas? i looked it a thread and it said to reboot my computer into safe mode and disable digital driver sig.. still not working..
ideas on how to get pass the file analysis part?
Click to expand...
Click to collapse
are you using a .pit file? and if so is it the right 512 .pit file?
if both those are yes, delete the one on your system and re-download it.
I had this same exact problem a few weeks back Odin would hang on the pit file, just redownloaded and it worked like a charm.
and just a quick reminder of everything out for the Vibrant right now
Only stock firmware use the 'PDA' option a pit file, and re-partition
froyo firmware use the 'PDA' option and a pit file, no re-partition
JACs kernels use the 'CSC' option and no pit file, no-repartition

i have a Bell Vibrant and all the methods don't work. i tried the 3 button (remove batt,place in batt, plug USB, wait for the the ''star" to appear, hold VOL+/- and POWER and wait for the screen to turn off, release POWER, but it just goes back to recharging screen. tried it 40 times
tried the power off, remove battery, replace battery, hold both vol buttons, plug in usb. no go as well.
ANything else? I'm stuck at the boot screen (the 'S' glowing part).

This is what always works for me.
Unplug your USB from your phone
Makes sure ODIN is ready to go on your PC
Hold down the Down Volume and Power until the download screen comes on
Then plug your USB back into the phone

fire up odin
pull your battery
connect phone to pc WITH THE BATTERY OUT
hold volume up+down and power
put battery in while still holding those buttons
the screen will light up with....something. Wait for the screen to blink and then release the buttons.
You are now in download mode!

i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......

Deliximus said:
i will try those methods. Thanks.
crap, still no. just keeps showing the battery charging. i remember rescuing my htc magic so many times, but no go on this guy.....
Odin all fired up when doing this......
Click to expand...
Click to collapse
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.

mesajoejoe said:
Best way for us to help you, is for you to help yourself first, educate yourself and post this in the right forum please and we would all be more than gracious to help you out
Click to expand...
Click to collapse
Dude, the Vibrant is new to us all. None like it. So dev wise its harder to explain and understand when we are used to coming from a one press method, now were using Odin, and Thor's hammer to flash our phones, which is god awful, no pun intended.
Dont flame your fellow Vibrant user cause he doesent understand the 613 steps it involves, and every other way to do so. Help the kid.
I am also in this position, just using a finger in the socket method, if its on it'l shock me, know what i mean. Just try it all. I have a feeling its getting harder and harder to brick phones because the manufacture is not retarded, they fix them right back, and ship them back out to customers who need replacements. I know this as a friend works at an AT&T shipping warehouse.
So cant we all just hit a bong, or get a long? And help?
If someone could explain all this 512PIT, PDA, and CSC, and Phone. It would help so much, sometimes a picture is worth a thousand words. Just sayin.

"Oh man, I am so high right now, i have no idea whats going on."
-Towelie

aloxotls said:
Did you make sure that the USB was unplugged when you used my method of holding down the volume down button and power button together until the download screen came up?
If you are familiar with ADB. You can also power your phone on and then plug in the USB and then type in the command line:
adb reboot download
to get it to reboot into download mode.
You can also use this command from the recovery console if you are able to get to it.
Click to expand...
Click to collapse
Yeah man, i'll try it again!! And when do I start typing (sending out the adb command) when the power turns on? Thanks.
Question is: when i press power+vol Down, the boot splashscreen comes on (Galaxy S etc etc).....

I am sorry you have a Bell Vibrant, it is a little different than my phone. I found this hope this helps
HOWTO GET INTO DOWNLOAD-MODE:
- Turn off your Phone
- Hold VOLUME DOWN + HOME Buttons
- While holding VOLUME DOWN + HOME Buttons press POWER Button until you reach Download-Mode
- Release all Buttons
I also read that some of the Bell Vibrants had their Download/Recovery mode disabled.
http://forum.xda-developers.com/showthread.php?t=754673&highlight=bell
As far as the adb command I would start as soon as it powers on. It will say "error:device not found" at first, but just keep on hitting arrow up and hitting the enter in the command window until it accepts the command.
Good Luck

Did I Brick It? $20 Reward

Moving up from an Eris to the Fascinate. Rooted the phone successfully via reboot, SuperUser Icon.
Went to install Clockworkmod, put phone in Download mode, ran Odin said failed first try so I tried it again, didn't attempt to install clockwork phone rebooted and immediately went to the phone, triangle pc icon (bad right).
So I can't get the phone back into download mode. I can only get recover via battery pull, plug in usb cable, power on phone and then hold up volume and power button and I'll get to recovery. Reboot in recovery does nothing, update.zip comes up with an error and factory reset and clear cache do nothing. PC will not recognize phone via USB so I don't know what to do...
$20 Paypal to the first poster that can get me back on track. Detailed instructions/ideas please.
TIA

Have you tried the same steps that you use to get into recovery, but with the down volume button instead?
Sent from my SCH-I500 with Dirrk's LV 1250 voodoo lagfix installed.

Yes, it goes from the battery charging Icon (once I first plug it into the usb and power on).
If I hold up volume and power it goes to recovery.
If i hold down volume and power it goes to phone, triangle, pc icons.

Hokay.
Pull your battery and usb cable.
Leave your battery out.
Hold DOWN VOLUME and plug in usb cable, while odin is running in background.
Welcome to download mode.
Insert battery.
Continue with Odin madness.

OK, that worked, now my PC is recognizing the device a serial item and it's not coming up in Odin?

re-open odin.

Nothing still, feels like a PC, driver issue now....

tmoneyr007 said:
Nothing still, feels like a PC, driver issue now....
Click to expand...
Click to collapse
32-bit = wikifilez (replace with .com) /root%20files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
64-bit = wikifilez (replace with .com) /root%20files/epic4g/usb_drivers_GalaxyS_x64.zip

As you have obviously had it working before, have tried restarting your computer....can you use adb when in recovery mode?

I got you back to download mode, what do I win

Whats the update after rebooting?

adrynalyne said:
I got you back to download mode, what do I win
Click to expand...
Click to collapse
I'm all good, rooted, clockwork, super clean rom. Thanks Forum
Beer money in your Paypal, I honor my offers!
Thanks

You need to post what fixed your problem so others can be helped in the future

Tried a friends computer, installed 32 bit drivers (my PC is Win 7 64bit and it didn't like recongizing the phone).
Run Odin
Pull Battery
Hold Down Volume button
Plug-In USB Cable
Download mode began
Installed Battery
Ran clockwork via Odin PDA
Installed, rebooted correctly
Happy Ending, Beer money for the help and I got my phone squared away!

Just for future reference, if you have the correct drivers installed win7 64 bit works fine....that is what I have as welll...glad you got it

adrynalyne said:
I got you back to download mode, what do I win
Click to expand...
Click to collapse
Victory!!!!

I had this problem before. Odin didnt want to do its job if I put the phone in download mode with the data cable plugged in.
You could try unplugging the data cable.
Pull the battery.
Put the battery back in.
Hold volume down and do a short press of power maybe like 1 second long.
wait till it goes into download mode.
Open Odin.
Plug in phone.
That should work. It would fail every time for me if I didnt do those steps.
Hope it helps!
Sent from my SCH-I500 using XDA App

guys my phone had that triangle of death, but after doing the instructions here i got it into download mode and downloaded all the files from the odin thread and did the reset and now it's just stuck at the samsung screen flashing over and over... can someone help me?

itzjonjon69 said:
guys my phone had that triangle of death, but after doing the instructions here i got it into download mode and downloaded all the files from the odin thread and did the reset and now it's just stuck at the samsung screen flashing over and over... can someone help me?
Click to expand...
Click to collapse
Did you use odin3 one click back to stock?....if so either flash again or download again. Sometimes things get corrupted.

newter55 said:
Did you use odin3 one click back to stock?....if so either flash again or download again. Sometimes things get corrupted.
Click to expand...
Click to collapse
i used odin3, i re downloaded everything like 5x's and its still stuck on the samsung screen and just reboots over and over... I think i really ****ed this one up :/ called verizon should get a replacement here tomorrow

so we all seen this before...

yes I majorly effed up. installed a rom or at least attempted to. Rbooted device then got thrown into the endless boot and reboot mode. powered off device then back on. same deal. put my phone into download mode by pressing the volume up and down combo and it worked. okay went into odin and went to flash and effed up once again. now Im stuck on the |PHONE--/!\--PC| logo. read up on all posts in here about it people have had success but i am not one of them. my phone isnt hardware locked since I was able to get into download mode via key the three key press. what on earth have i done? shoul I call it in and have it replaced or try something elese. oh and wehen I plug my phone into pc it downloads th drivers it needed but doesnt show as connected. ugh what am I doing wrong?

The phone pc logo is the download mode. Odin away back to stock. Just press start on Odin.

how? which buttons should I nnot check off and how to i flash to stock? im a effen noob and played with fire when I shouldnt have

odin will not detect my phone.

jaquaslife said:
odin will not detect my phone.
Click to expand...
Click to collapse
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.

Longcat14 said:
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.
Click to expand...
Click to collapse
Plus pull the battery and take out the sim and the sd card then do the above Read up on the sticky in the Gen section S15274N did the posting has all the info for you there

i did get back in AND ROOTED WITH BIONIX 1.3.1.

jaquaslife said:
i did get back in AND ROOTED WITH BIONIX 1.3.1.
Click to expand...
Click to collapse
First time that happened to all of us, I'm sure we all freaked out for a bit, but now you know how to pretty much fix any soft brick, not so scary now.

This phone is damn near impossible to brick...glad things worked out!

I was up till 330 am. Was definetly a scare. But thanks for the help now off to enjoy it
Sent from my SGH-T959 using XDA Premium App

Brick my phone applying 3 button fix

I tried applying [110% SAFE] 3-Button Combo FiX for Selected/ALL Firmwares
It failed and now I had a Phone ! PC logo. I can get a USB JIG but will it still boot to download mode? If it does, what should I flash it with? stock 2.1? stock 2.2? Please help!! Am I still able to get into DOWNLOAD mode with JIG?? THANKS!!!
P/S Flash this fix on my friend's i9000 and it worked. No Idea why didnt worked on mine =(

Any help please????

Your bootloader is fine if you get the PC-phone blinking icon. Best bet is to send your phone for warranty.
What was your original OS before flashing, 2.1 or 2.2?
You should flash the full package of whatever OS you were on by using the jig to get to the donwnload mode then flashing with Odin.

I will try to make a USB JIG and get in to download mode. Will flash stock firmware and see. Thanks! So if there's still Phone ! PC icon, bootloader still intact?

I'd you still have download mode, I have found that holding all three buttons and when galaxy logo comes up releasing all it works?
Open Odin. In PDA add a new kernel ie voodoo. Put phone in download and connect to Odin. Press start and in 20 seconds all should be good. Always works for me. Just a kernel file though. No repartition. auto reboot checked. Good luck
Sent from my GT-I9000 using XDA App

xchasa said:
I'd you still have download mode, I have found that holding all three buttons and when galaxy logo comes up releasing all it works?
Open Odin. In PDA add a new kernel ie voodoo. Put phone in download and connect to Odin. Press start and in 20 seconds all should be good. Always works for me. Just a kernel file though. No repartition. auto reboot checked. Good luck
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The phone has no 3 button combo, that's why I tried applying the 3 button fix but it brick. So I hope as long as it still shows Phone ! PC logo, it's still able to get into download mode using usb JIG.

Yes, the JIG should put the phone in download mode... its a very useful tool so look after it.
then when your in download mode, i personally would flash 2.1 with all 3 files and PIT. also check the re-partition box in odin. and start again good luck.

yvliew said:
The phone has no 3 button combo, that's why I tried applying the 3 button fix but it brick. So I hope as long as it still shows Phone ! PC logo, it's still able to get into download mode using usb JIG.
Click to expand...
Click to collapse
Ok. Sorry. Some people think they've got no 3 button combo when in fact they only have no recovery.
Sent from my GT-I9000 using XDA App

xchasa said:
Ok. Sorry. Some people think they've got no 3 button combo when in fact they only have no recovery.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Very true !!! happened to me on my Galaxy Spica, had the Phone ! PC sign, thought it was bricked..... I laid a brick.... But download mode worked so i fixed it and give it to the misses

http://forum.xda-developers.com/wiki/index...#Bricked_Screen
Bricked Screen
(A.K.A. phone-!-pc or Black Screen of Death)
For reference, this is what a bricked Samsung Galaxy S looks like. To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death
A fully bricked phone (as shown on the screenshot) will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
http://www.youtube.com/watch?v=Y8nlJTWV7Nk...player_embedded
have u try this???

Hold down Vol UP+Vol Down+Power
Vol up vol down cannot be both held its a rocker switch .
jje

I think I posted in i9000 forum?? Your method is for vibrant???
enaleni said:
http://forum.xda-developers.com/wiki/index...#Bricked_Screen
Bricked Screen
(A.K.A. phone-!-pc or Black Screen of Death)
For reference, this is what a bricked Samsung Galaxy S looks like. To recover from this problem, you'll need to get into the Download Mode.
Black Screen of Death
A fully bricked phone (as shown on the screenshot) will not boot, or display the charging logo when connected to a USB charger. This presently cannot be recovered from any recovery attempt, it will require the phone to be sent back to Samsung and be serviced.
This screen does not always mean your phone is bricked. If you have a hardware locked vibrant, maybe, however, if your phone is not hardware locked, unplug the USB cable from the phone, Hold down Vol UP+Vol Down+Power, the screen will flash black, continue holding down all 3 buttons, you will see the "phone--!--PC" screen again, continue holding all 3 buttons, the screen will flash black again, release the power button only. This will put you into Download Mode.
http://www.youtube.com/watch?v=Y8nlJTWV7Nk...player_embedded
have u try this???
Click to expand...
Click to collapse

yvliew said:
I tried applying [110% SAFE] 3-Button Combo FiX for Selected/ALL Firmwares
It failed and now I had a Phone ! PC logo. I can get a USB JIG but will it still boot to download mode? If it does, what should I flash it with? stock 2.1? stock 2.2? Please help!! Am I still able to get into DOWNLOAD mode with JIG?? THANKS!!!
P/S Flash this fix on my friend's i9000 and it worked. No Idea why didnt worked on mine =(
Click to expand...
Click to collapse
I used the same method for getting 3 button down mode, and my I9000 brick same like yours !!
And I bought JIG cable, but even JIG did not help me, I9000 is totaly DEAD and GONE !!
Do not use this method!!

EDIT : I've fixed it with JIG... Thanks!!!
danc00 said:
I used the same method for getting 3 button down mode, and my I9000 brick same like yours !!
And I bought JIG cable, but even JIG did not help me, I9000 is totaly DEAD and GONE !!
Click to expand...
Click to collapse

yvliew said:
EDIT : I've fixed it with JIG... Thanks!!!
Click to expand...
Click to collapse
making (or maybe buy) a JIG is the way to get back to live the phone, even the screen shows nothing.

i had the same problem , while trying to "unlock " the 3 button combo my galaxy s managed to become a brick , so i made the jig and flashed it again with 2.2
i still lack the 3 button combination but whenever i need to get to donwload/recovery mode i use ADB
easier and safer
good luck mate

@danc00: no phone is dead. i know people with a riff box who give this phone life for only 30€.
you only need a jtag / riff box
http://www.youtube.com/watch?v=T7edUXE7jLg
if you want to send it to germany to give it life again give me a message.
first you should search smbdy who has this box in your country
@kako: if the first and the second bootloaders are damaged only a jtag/riff box can help your phone ah or samsung itself i dunno what they use for it
cheers

Bricked, can't even get into download...am I boned?

Basically, thats whats going on. I've followed instructions on various threads, tried everything. The phone simply will not boot into recovery no matter what I try. Is there anything left I can do?

Let it sit for a day and try again. It worked for me many times in the past. Sometimes Odin would recognize my phone that wasn't even in a download mode.
Sent from my T959 using XDA App

Was fastboot enabled? Have you tried pulling the battery before attempting to get into recovery?
Sent from my HTC sensation using Tapatalk

gun said:
Let it sit for a day and try again. It worked for me many times in the past. Sometimes Odin would recognize my phone that wasn't even in a download mode.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Problem is, its already been like this for about 3 days. I guess I'll give it another day then.
StuartTheFish said:
Was fastboot enabled? Have you tried pulling the battery before attempting to get into recovery?
Sent from my HTC sensation using Tapatalk
Click to expand...
Click to collapse
Not that I am aware of, and yes i have

What rom are you in? Try to hold vol up + power
Sent from my SGH-T959 using XDA Premium App

Semianonymous said:
Basically, thats whats going on. I've followed instructions on various threads, tried everything. The phone simply will not boot into recovery no matter what I try. Is there anything left I can do?
Click to expand...
Click to collapse
try to odin back to stock
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Or try that same method without holding the power button, just the volume rocker (up and down) when plugging into usb that works for some ppl
The vibrant is tough to hard brick so keep trying