Bricked, can't even get into download...am I boned? - Vibrant General

Basically, thats whats going on. I've followed instructions on various threads, tried everything. The phone simply will not boot into recovery no matter what I try. Is there anything left I can do?

Let it sit for a day and try again. It worked for me many times in the past. Sometimes Odin would recognize my phone that wasn't even in a download mode.
Sent from my T959 using XDA App

Was fastboot enabled? Have you tried pulling the battery before attempting to get into recovery?
Sent from my HTC sensation using Tapatalk

gun said:
Let it sit for a day and try again. It worked for me many times in the past. Sometimes Odin would recognize my phone that wasn't even in a download mode.
Sent from my T959 using XDA App
Click to expand...
Click to collapse
Problem is, its already been like this for about 3 days. I guess I'll give it another day then.
StuartTheFish said:
Was fastboot enabled? Have you tried pulling the battery before attempting to get into recovery?
Sent from my HTC sensation using Tapatalk
Click to expand...
Click to collapse
Not that I am aware of, and yes i have

What rom are you in? Try to hold vol up + power
Sent from my SGH-T959 using XDA Premium App

Semianonymous said:
Basically, thats whats going on. I've followed instructions on various threads, tried everything. The phone simply will not boot into recovery no matter what I try. Is there anything left I can do?
Click to expand...
Click to collapse
try to odin back to stock
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Or try that same method without holding the power button, just the volume rocker (up and down) when plugging into usb that works for some ppl
The vibrant is tough to hard brick so keep trying

Related

so we all seen this before...

yes I majorly effed up. installed a rom or at least attempted to. Rbooted device then got thrown into the endless boot and reboot mode. powered off device then back on. same deal. put my phone into download mode by pressing the volume up and down combo and it worked. okay went into odin and went to flash and effed up once again. now Im stuck on the |PHONE--/!\--PC| logo. read up on all posts in here about it people have had success but i am not one of them. my phone isnt hardware locked since I was able to get into download mode via key the three key press. what on earth have i done? shoul I call it in and have it replaced or try something elese. oh and wehen I plug my phone into pc it downloads th drivers it needed but doesnt show as connected. ugh what am I doing wrong?
The phone pc logo is the download mode. Odin away back to stock. Just press start on Odin.
how? which buttons should I nnot check off and how to i flash to stock? im a effen noob and played with fire when I shouldnt have
odin will not detect my phone.
jaquaslife said:
odin will not detect my phone.
Click to expand...
Click to collapse
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.
Longcat14 said:
1. Power your phone off all the way.
2. Unplug the cable.
3. Fire up ODIN (as admin if you have vista/7)
4. Hold vol. up and down, and plug USB into phone.
5. ODIN should now detect your phone, and you will be in download mode.
Click to expand...
Click to collapse
Plus pull the battery and take out the sim and the sd card then do the above Read up on the sticky in the Gen section S15274N did the posting has all the info for you there
i did get back in AND ROOTED WITH BIONIX 1.3.1.
jaquaslife said:
i did get back in AND ROOTED WITH BIONIX 1.3.1.
Click to expand...
Click to collapse
First time that happened to all of us, I'm sure we all freaked out for a bit, but now you know how to pretty much fix any soft brick, not so scary now.
This phone is damn near impossible to brick...glad things worked out!
I was up till 330 am. Was definetly a scare. But thanks for the help now off to enjoy it
Sent from my SGH-T959 using XDA Premium App

can't get into download more....

I TRIED EVERYTHING the phone will NOT get into download mode... i forgot my got damn password to my gmail and now i cant even activate the phone.. i found out i can use odin3 but the thing is no matter what i do it will NOT go into download mode
Pull battery. Plug phone and computer using usb cable. Hold both volume up and down. Insert battery. Works everytime unless of course you flashed i9000 boot loaders in which case only hold either up or down.
Sent from my GT-I9000 using XDA Premium App
i tried everything and all i can get it into is recovery mode and thats.. this phone is stock and not even rooted..
do i need anything else installed other trhan samsung drivers?
how come it can boot into recovery mode but not download mode? i have takin the battery off plug it into to my comptuer hold vol + and down and put the battery in and still nothing half the time it will boot into recovery and thats about it...
explodingboy70 said:
Pull battery. Plug phone and computer using usb cable. Hold both volume up and down. Insert battery. Works every time unless of course you flashed i9000 boot loaders in which case only hold either up or down.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Do this + try tapping the menu key and or the home key while holding down the other buttons.......... there is a timing trick to this but one of these will work . Also in Q & A S14274N Noob bible has all the other ways check it out.
as a last resort u can always get a usb jig to get u into download mode!
oka1 said:
Do this + try tapping the menu key and or the home key while holding down the other buttons.......... there is a timing trick to this but one of these will work . Also in Q & A S14274N Noob bible has all the other ways check it out.
Click to expand...
Click to collapse
thanks, but it still wont get into download mode =\
as i said before u may need to get a usb jib and order one online to get into dl mode!!
bongholio said:
thanks, but it still wont get into download mode =\
Click to expand...
Click to collapse
If thats red recovery, voodoo, then go down to voodoo and in there should be reboot to download mode.
If its not there or you dont see red then search in recovery as some have dl mode. Also if you have adb set up on your computer and you can get to recovery then in command line type adb reboot download.
Sent from my GT-I9000 using XDA Premium App
bongholio said:
how come it can boot into recovery mode but not download mode? i have takin the battery off plug it into to my comptuer hold vol + and down and put the battery in and still nothing half the time it will boot into recovery and thats about it...
Click to expand...
Click to collapse
Try this:
Take the battery out and put it back. Then you should hold both volume keys while plugging the usb cable to the phone. Don't release the keys until download mode appears.
maybe ur hardware locked? s thats why u cant get into dl mode!
bongholio said:
thanks, but it still wont get into download mode =\
Click to expand...
Click to collapse
What ROM are you running?
If you are completely stock, then use Kies to update to the latest official stock ROM, this will fix your 3 button issue via a SBL fix.
I love the SBL fix.

HELP: Cannot get back into Download Mode...Truly Bricked??

I'm pretty sure I just bricked my **@#*& phone trying to Flash the Semaphore 1.6.0Bm kernel
It failed the first time around when I tried to flash it via Odin.
So I took the battery out like I usually do then went to put it back into download mode... To my surprise I cannot get into download or recovery mode anymore.
I've tried all button methods and none worked. I can't get past the screen that has the cell --- computer screen.. Looks like I may need a jig now...?
Any other ideas that I might be able to try?
Thanks.
What happens when you three finger boot and just keep holding it? Same screen you have now?
Sent from my SCH-I500 using XDA App
efan450 said:
What happens when you three finger boot and just keep holding it? Same screen you have now?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
You mean holding the Vol up & down, Home and power button?
Same thing.
I've left the battery out for over 20 minutes, tried it while plugged into the computer, the adapter and not plugged in at all.. Still nothing.
This sucks..
if the phone doesn't do anything at all you can probably take it in to your service center and tell them it wont turn on but it didn't get wet or anything... ubless they have some magical way to get it into download then they'll replace it if you're under warranty.
Sent from my MIUI SCH-i500
Load up Ubuntu or something and load up heimdall command line. There should be an option to kick it out of the connect to PC screen.
Sent from my ADR6350 using XDA App
Thanks for your responses.
I tried the OneClick.jar heimdall method but it seems to not recognize that the phone is even plugged in.
I did just purchase a USB jig off ebay, I'm guessing that this is my last option before having to bring it back to Telus for a replacement
have you heard of One-Click UnBrick?
I have seen that screen a few times. This worked for me every time to get it back into recovery...
http://forum.xda-developers.com/showthread.php?t=1153310
studdyhalllooser said:
have you heard of One-Click UnBrick?
I have seen that screen a few times. This worked for me every time to get it back into recovery...
http://forum.xda-developers.com/showthread.php?t=1153310
Click to expand...
Click to collapse
Thanks for the Link but I gave this a try and unfortunately the phone isn't picked up by any of my computers (XP, Mac OSX & Ubuntu), when connected Via USB. Failed everytime
iwebsource said:
I've tried all button methods and none worked. I can't get past the screen that has the cell --- computer screen.. Looks like I may need a jig now...?
Any other ideas that I might be able to try?
Thanks.
Click to expand...
Click to collapse
I got this same problem when I installed CM7 on my T959d for the first time and Odin hung after clicking [Start]. Rebooted my phone and was greeted with a nice soft-brick screen. What a scare that was.
Here's what I did:
1. Take out the battery from the phone.
2. Plug the phone via USB to the PC (odin was open)
3. Hold down [VOL -] key
4. Hold down [POWER] key
I don't remember if the SGH-GTI9000 screen popped up, but if it does, wait for it to switch back to a black screen and then release just the [POWER] key, keeping [VOL -] pressed.
That put me back in Download Mode. Fired up ODIN again and the flash was successful this time around.
edit: Also, the Semaphore kernel i see in i9000 is for JVS roms. I'm not sure how that would affect darkys, since it's a JVR rom.

Question

I am stuck in twrp my nandroid fails "when its finished installing I revert to twrp I have all the tools needed to revert to stock its just I cannot get out of twrp. It aslo wont power off so I cant get into download mode either..... what can I do?
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
MikeJennni said:
I am stuck in twrp my nandroid fails "when its finished installing I revert to twrp I have all the tools needed to revert to stock its just I cannot get out of twrp. It aslo wont power off so I cant get into download mode either..... what can I do?
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
Click to expand...
Click to collapse
I had this when running TWRP and if I remember you hold the "off" button down until it starts to reboot and then quickly hold the up button while it's rebooting.
You may be able to just hold the start and up button at the same time then turn the start button loose when you see the logo.
Again; I can't remember exactly what I did but it's safe to say to device is not broken.
One note: I was never able to get TWRP to run correctly (consistently) on this device without at least some issues.
I use CMR with no problems.
Also when I had this problem i had to do a complete wipe to get completely into download mode...
Good luck...
Gabriel51 said:
I had this when running TWRP and if I remember you hold the "off" button down until it starts to reboot and then quickly hold the up button while it's rebooting.
You may be able to just hold the start and up button at the same time then turn the start button loose when you see the logo.
Again; I can't remember exactly what I did but it's safe to say to device is not broken.
One note: I was never able to get TWRP to run correctly (consistently) on this device without at least some issues.
I use CMR with no problems.
Also when I had this problem i had to do a complete wipe to get completely into download mode...
Good luck...
Click to expand...
Click to collapse
Ill try wiping holding volume up or both at logo isnt working ....im guessing because its restarting instead of power off. Ill report back
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
MikeJennni said:
Ill try wiping holding volume up or both at logo isnt working ....im guessing because its restarting instead of power off. Ill report back
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
Click to expand...
Click to collapse
That's correct! it will auto restart so you have to get your timing right. Try holding down the start button and as soon as the screen goes blank release the start button and grab the up button..
Gabriel51 said:
That's correct! it will auto restart so you have to get your timing right. Try holding down the start button and as soon as the screen goes blank release the start button and grab the up button..
Click to expand...
Click to collapse
No luck with the timing. And now after wiping my nandroid is gone
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
Ok. I got it. Full wife allowed me to fully power off. Once powered off in achieved download mode by holding volume up and plugging device into laptop via micro usb.
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
MikeJennni said:
Ok. I got it. Full wife allowed me to fully power off. Once powered off in achieved download mode by holding volume up and plugging device into laptop via micro usb.
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app
Click to expand...
Click to collapse
This is why I abandoned TWRP which was always my favorite, but not for this device.
I'm glad your up and going again...
Gabriel51 said:
This is why I abandoned TWRP which was always my favorite, but not for this device.
I'm glad your up and going again...
Click to expand...
Click to collapse
Yeah twrp is new to me ive always used cwm. Thanks for the quick responses the full wipe definitely helped. Thanks again
Sent from my SAMSUNG-SGH-I467 using XDA Free mobile app

I think I hard bricked my 727

I've had my US model 727 Pro 3 for a month or so, and all was pretty good. I got the bootloader unlocked, rooted it, but was having trouble with the filesystem remaining read only, so I couldn't make build.prop edits and xposed showed that it was running, but the modules weren't doing anything. So, I finally figured I'd start over from scratch, wiped everything using the AIO toolkit, and flashed TWRP again. Now my phone won't boot up at all. No vibrations, nothing but a black screen whether I try holding just the power button, power plus volume up, down, or both up and down. Any suggestions, or am I just SOL?
Sent from my SM-G920F using Tapatalk
hedphurst said:
I've had my US model 727 Pro 3 for a month or so, and all was pretty good. I got the bootloader unlocked, rooted it, but was having trouble with the filesystem remaining read only, so I couldn't make build.prop edits and xposed showed that it was running, but the modules weren't doing anything. So, I finally figured I'd start over from scratch, wiped everything using the AIO toolkit, and flashed TWRP again. Now my phone won't boot up at all. No vibrations, nothing but a black screen whether I try holding just the power button, power plus volume up, down, or both up and down. Any suggestions, or am I just SOL?
Click to expand...
Click to collapse
Have you tried adb? I'm assuming you have. That's why I don't trust the toolkit I prefer to manually flash things.
HewettBR said:
Have you tried adb? I'm assuming you have. That's why I don't trust the toolkit I prefer to manually flash things.
Click to expand...
Click to collapse
I used adb/fastboot to manually flash TWRP, then the device went dead when I tried to reboot from fastboot into TWRP. I can't get it to power on at all now. I tried following steps I found in a thread on fixing a hard brick with the Qualcomm QIF tool, and it seemed to recognize the phone, but still didn't get it to boot.
Sent from my SM-G920F using Tapatalk
Did it run out of power? Try charging it?
HewettBR said:
Have you tried adb? I'm assuming you have. That's why I don't trust the toolkit I prefer to manually flash things.
Click to expand...
Click to collapse
Sometimes mine gets in a mode where I have to hold down the power button for a real long time (45 seconds or so). Give it a try.
Did you flash the correct twrp?
Tikerz said:
Did it run out of power? Try charging it?
Click to expand...
Click to collapse
It was fully charged when this started, and when I plug it in now, there's no LED indicator or on-screen battery display to show that it's charging.
zoid_99 said:
Sometimes mine gets in a mode where I have to hold down the power button for a real long time (45 seconds or so). Give it a try.
Click to expand...
Click to collapse
I've tried holding it for a long time (haven't timed it, but I think for around a minute). I'll try even longer and see what happens.
PeaKay.18 said:
Did you flash the correct twrp?
Click to expand...
Click to collapse
Yep. Same version that had worked for me previously. I assume that if it was just a bad flash, that I'd be able to get into fastboot mode, but that's not working, either.
Do you get any qualcom diagnostics port when connected to computer?
If you hold power and volume down you can't get into fastboot?
Sent from my LEX727 using Tapatalk
hold the power for 50 seconds
Presterin said:
Do you get any qualcom diagnostics port when connected to computer?
Click to expand...
Click to collapse
I was able to connect to it via the Qualcomm software, but wasn't able to get it to power up after flashing the "hard brick fix" files I found in a Qualcomm brick fix post. I may try this again a bit more meticulously before trying to send the device back.
Sent from my SM-G920F using Tapatalk
Tikerz said:
If you hold power and volume down you can't get into fastboot?
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
Nope. No response whatever from any combination of the physical buttons, no matter how long they're held down.
Sent from my SM-G920F using Tapatalk
qingcai said:
hold the power for 50 seconds
Click to expand...
Click to collapse
Tried that. Tried holding down power for over a minute, tried holding power + volume down for a minute, tried power + volume up for a minute, even tried holding all three down for at least 30 seconds. Nothing. The only indication I get that the device isn't completely fried is when I plug it into the myth desktop while running the Qualcomm diagnostic software, but I can't get it to boot up with that program, either.
Sent from my SM-G920F using Tapatalk
hedphurst said:
I was able to connect to it via the Qualcomm software, but wasn't able to get it to power up after flashing the "hard brick fix" files I found in a Qualcomm brick fix post. I may try this again a bit more meticulously before trying to send the device back.
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
What files did you use? I think we don't have service rom for this device.
I have the same issue. My Le Pro 3 died using Open Camera, taking pictures. It does not power on, does not respond to anything, no key combinations work, no charging progress, nothing, looks dead.
rubiohiguey said:
I have the same issue. My Le Pro 3 died using Open Camera, taking pictures. It does not power on, does not respond to anything, no key combinations work, no charging progress, nothing, looks dead.
Click to expand...
Click to collapse
me too
kultigin said:
me too
Click to expand...
Click to collapse
Were you using the camera or other app? What happened in your case?
My case is described here:
https://forum.xda-developers.com/le-pro3/help/camera-bricked-le-pro-3-t3528555
rubiohiguey said:
Were you using the camera or other app? What happened in your case?
My case is described here:
https://forum.xda-developers.com/le-pro3/help/camera-bricked-le-pro-3-t3528555
Click to expand...
Click to collapse
two cases of open camera causing hard brick. may be the flash is causing sudden surge /spike.

Categories

Resources