Hi, I try to install android nand on my htc hd2. I had SPL 2.08.0000, so i do HARDSPL, everything was fine. Next step was changing radio to 2.15.50.14, I decided to remove windows phone stuff in task29. I did everything according to instructions, and installation was started. I waited few minutes, but progress bar was still on 0%. On hd2 screen, I got notification to press power button to start update or press volume down to cancel. I installed android first time, so I thought that pressing power button was right. Next, phone screen was changed on the htc logo and progress bar. After 4% hd2 was turn off, and i had error on task29 installer. Thats all. Now, I can't do anything. I turn on hd2, and i have 4-color screen with this information:
SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Please help me ;/
It appears the Task 29 did remove your ROM as you said it will only boot to the multi color bootloader screen. But because you got the error message the Task 29 must not have finished completly. It also appears you had a LEOIMG.nbh file on your SD card cause you said the following.
On hd2 screen, I got notification to press power button to start update or press volume down to cancel. I installed android first time, so I thought that pressing power button was right. Next, phone screen was changed on the htc logo and progress bar. After 4% hd2 was turn off, and i had error on task29 installer
Click to expand...
Click to collapse
.
So you see it appears to me that when your HD2 either booted into bootloader mode or was rebooted into bootloader mode it detected the LEOIMG.nbh file on your SD card and asked you if you wanted to flash the update cause that is what the bootloader is programed to do when it detects a LEOIMG.nbh file. And when you pressed the power button you told the HD2 to flash the file. So some how that messed up the Task 29 and the Task 29 messed up the flash of the nbh file.
I would remove the SD card and re run the Task 29 and then flash MAGLDR or cLK wich ever one you want to use for your Android bootloader. You can check out the guide in my sig if you want, it should provide some guidance to you.
When I remove sd card, progress bar(on installer and hd2) stuck on 0% and task29 shows error 262. After removing battery and turning of the phone again, on screen appears notification "Software update failed. Please try again". I still have SPL-3.03.0000. Maybe HSPL4 will help?
flamner said:
When I remove sd card, progress bar(on installer and hd2) stuck on 0% and task29 shows error 262. After removing battery and turning of the phone again, on screen appears notification "Software update failed. Please try again". I still have SPL-3.03.0000. Maybe HSPL4 will help?
Click to expand...
Click to collapse
Yeah if you have SPL version 3.03.0000 then you have to use HSPL 4 to flash HSPL that SPL version is why HSPL 4 was created by the DFT because HSPL 1 through 3 are not compatible with SPL version 3.03.0000. Go here for HSPL 4.
Also Task 29 wil not work without HSPL being on your HD2. I bet when you flashed via SD card it removed HSPL and that is why your Task 29 will not work.
Thanks for help. MIUI nand was installed
Related
Hi there! I have a problem after install MAGLDR :/ I connected my HD2 to computer with ActiveSync, runned ROMUpdateUtility from computer, on my phone there was a tricolour screen, then self-reset and phone is freezing on white HTC LOGO. I tried to turn off my phone, remove battery... I'm also turning my phone on with press vol down + power - I have 3 colour screen and now what? PLEASE HELP!
Connect your HD2 to your laptop/pc... boot it while pressing volume down.. wait untill it says usb in the bottom of your screen. Now you can flash HSPL 2.08 and flash a custom or original rom.
I had the same.. gonna stick with RAM roms untill this is nand stuff is sorted out
I have the same problem... but after reflash HSPL 2.08 there will be no change. Could not start the machine.
How can flash rom from pc without booting the machine?
I couldn't understand "Now you can flash HSPL 2.08 and flash a custom or original rom." the second step ...
solved!
I had the same problem.
The issue it's the radio.
install 2.15.50.14
http://www.multiupload.com/QP0IWGY42F
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
sexyseamus said:
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
Click to expand...
Click to collapse
Download a compatible radio (eg 2.15.50 in post above), boot to bootloader (switch off, vol down + power on (keep holding vol down until it boots), connect to pc and when usb shows on screen run the CustomRUU.exe in the radio download. (if there isn't one included you can take any one from a custom wm rom). You flash the radio the same way that you flash a rom.
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
sexyseamus said:
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
Click to expand...
Click to collapse
Are you sure you have HSPL installed properly. In bootloader mode, check the spl version - it should show as 2.08.hspl, not 2.08.0000 or any other hspl version.
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
sexyseamus said:
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
Click to expand...
Click to collapse
I had your problem and for some reason when I first ran hspl the first time and put 2.08 on my phone it said it worked but it didn't actually do anything.
Just reinstall 2.08 HSPL on your phone and then run MAGLDR.
Similar Scenario
I installed 2.08.HSPL - confirm at boot loader screen
I installed MAGLDR 1.13 with success
Flashed HD2_Core_Droid_Desire_HD_V1.5_NAND_ONLY_LEO1024_TMOUS to my phone with success
Phone worked fine for about a day and a half and froze up
Pulled battery and restarted to white screen
I can't seem to roll back the SPL, reinstall the MAGLDR, or install a different radio.
ROM Update Utility appears to start to work and phone restarts and I get an error message that the image is corrupt.
Any ideas?
hi All
after installing ROMupdateutility.exe to my HD2 ,while restarting to get the black screen that have 9 choice but i didnt get this black screen and its stopped in HTC logo white screen,
whats wrong with this and what i have to do?
thanks alot.
I f you install no rom that's a bit normal
When you start your phone, push the power button and hold it until you get the menu.
i didnt get it yet, its 5 minutes
thanks,
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Beany69 said:
What version of HSPL do you have on your device. Magldr only works with 2.08 as per all instructions in many threads.
Click to expand...
Click to collapse
its 2.o8
Sent from my HTC Desire using XDA App
Problem with maglder
Hi
I am trying to install Magldr on my HTC HD2, SPL 2.08, however i am getting the following error message everytime MagLdr (RomUpdateUtility) restarts my phone to upload the new version,
"ERROR [266]: UPDATE ERROR
The update utility cannot get response from your PDA phone. Please check that your USB cradle/cable is connected properly between the PC and your PDA Phone. And also check your PDA Phone."
Dont know why it shows this message, I checked all the connections, the SPL shows connected to USB, my Windows 7, 64bit also dectects it, but I am still getting this message. please help
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Beany69 said:
Have you got SPL 2.08 or HSPL 2.08? The rom update utility won't run unless you've got HSPL installed.
Click to expand...
Click to collapse
thanks Beany69, Not sure, I am new to this thing, right, let me tell you extactly what it shows when I start my phone in boot mode or what ever its called i.e. when I press the downkey with green button
"PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40"
is this HSPL, if not how do I upgrade this it the required HSPL., please
and when I run the RomUpdateUtility.exe on my pc, it checks the current version displays it as "Miri"
ok so here is my story. i had nand and everything on my phone. i had madglr 13, hspl 2.08, and dft on. i flashed back windows rom and it was successful. next i was going take out hspl via sd card method. i did everything and when it started flashing via sd card it rebooted and now says "ROM UPDATE FAILED" and when usb card in it goes straight to "LOADING". please help. any help will be alot! thank you for your time D:
First at all, your device is alive.
The "Loading" within the display will inform you that you have NO bootloader and OS installed.
You have two options now:
1. RESTORE the original one
2. The quick and easy way is to install the HSPL 2.08
Power off your device, start HSPL3 and flash the HSPL 2.08 on it. After this power on with pressed VOL Down you can update whatever ROM you want.
Warning absolute noob here.
My HD2 leo froze in bootloader after using HD2Android NAND Toolkit.
Screen reads:
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Computer won't recognize the device anymore.
Next steps to take would be EXTREMELY appreciated.
Thanks!
trying to "flash" stock ROM
I promise I read through the threads before I posted, but you knw how your heart races and U cant think, let alone pick up new terms? welcome to my world...
Anywy, bought a 4GB Micro SD to try to flash [I don't know exactly what that means] my stock ROM again. I'll start with saving stock ROM I downloaded to the SD and plug the battery back into HD2 with the new SD loaded.... Is that flashing?
Thanks to anyone that can help!
back up but would love some trouble shooting
to see what I did wrong and get Android on here. Thanks for an help and all the threads that're out there
To get Android back on do this:
1) download this file http://cotulla.pp.ru/leo/Android/DFT_LEO_MAGLDR113_DAF.rar
2) turn the phone onto that bootloader, then run the RUU file from the download, it should flash magldr.
3) once magldr boots you can flash the Android ROM of your choice from this list
http://forum.xda-developers.com/forumdisplay.php?f=928
You may have to flash a clockworkmod recovery, in the ROM thread it may link you to the right one to flash using the USB flasher mode in magldr.
Thanks!
I'll try that and follow up here for others
I have the same problem exactly.
and the ruu you give told me ERROR (260) : CONNECTION
What can i do?
No one here can solve this problem?
No one here can solve this problem?
7AND said:
Warning absolute noob here.
My HD2 leo froze in bootloader after using HD2Android NAND Toolkit.
Screen reads:
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Computer won't recognize the device anymore.
Next steps to take would be EXTREMELY appreciated.
Thanks!
Click to expand...
Click to collapse
Maybe you don't install your ActiveSync or WMDC v6.1 correctly.
Your phone still working, because enter to bootloader but just no rom in side or error rom so it don't start up.
Please try to uninstall your activeSync or WMDC and restart your PC. Restart your PC and install ActiveSync or WMDC again.
I hope it working.
Wishes,
Not working, any other solution
picheth said:
Maybe you don't install your ActiveSync or WMDC v6.1 correctly.
Your phone still working, because enter to bootloader but just no rom in side or error rom so it don't start up.
Please try to uninstall your activeSync or WMDC and restart your PC. Restart your PC and install ActiveSync or WMDC again.
I hope it working.
Wishes,
Click to expand...
Click to collapse
Not working, any other solution
have you tried flashing a rom via the sd card download the rom, extract the stock rom find the file that ends in .nbh and rename it to LEOIMG.nbh put it in ur phone, turn phone on holding volume down until u get a grey screen and it will tell you what to press to flash.
are your volume buttons stuck is it booting straight to bootloader? if so you could have a problem
Nothing happened.
Demon_man said:
have you tried flashing a rom via the sd card download the rom, extract the stock rom find the file that ends in .nbh and rename it to LEOIMG.nbh put it in ur phone, turn phone on holding volume down until u get a grey screen and it will tell you what to press to flash.
are your volume buttons stuck is it booting straight to bootloader? if so you could have a problem
Click to expand...
Click to collapse
nothing happened. just stopped in the three color screen, Any other solution?
Any one can solve this problem.
Any one can solve this problem.
i've got the same problem..
Very anoying, i was curious about the HD2 Toolkit so i intstalled it and started working with it.
I used task 29 and after that i used clk repartition.
Now i'm stuck at udc_start()
I think because it wont connect usb
Only thing i can do is start into that and bootloader.
But when i'm in bootloader it wont connect to USB
WMDC is fresh so i'm out of options?
What do i need to do
puggepot said:
i've got the same problem..
Very anoying, i was curious about the HD2 Toolkit so i intstalled it and started working with it.
I used task 29 and after that i used clk repartition.
Now i'm stuck at udc_start()
I think because it wont connect usb
Only thing i can do is start into that and bootloader.
But when i'm in bootloader it wont connect to USB
WMDC is fresh so i'm out of options?
What do i need to do
Click to expand...
Click to collapse
flash stock via sd and try again.
Perhaps the Down volume button is damaged (always pressed and not released and you can not complete procedure to boot from SD) or at worst a shortcircuit board or processor that manifests similar.
I think I've the same problem, but with the UP volume button. I solved it after I uninstalled .dll's volume controller from WM65 (otherwise it beeps continuously and permanently displayed on the screen was the volume controller picture, like as I hold the volume up button continuously) and we could use in normal conditions.
Only the battery ends quickly (the phone completely stopped overnight, but with the battery inside the morning battery is dead). Otherwise in "normal use" is empty in 2-3 hours.
Hi,
I want to instal WP7 on my HTC HD2.
In the tutorial i use i should use the Rom update utility to get MAGLDR on my phone.
When i try to use this utility i don't get further than 0% and after some time i get a error (error 626)
What i did is:
- I reseted my HTC HD2.
- I started the Rom update utility. It says that i need a update from 1.66.404.1 to 2.00.000.0.
- So when i start this it will restart my phone and show me a progres bar.
This will stay on 0% and after 10 minutes the utility gives me a message that says:
You connection is lost(error 626). Than i need to "recover" my phone by taking the battery out and put in in again.
When i do this it wel restart my phone with the WM6.5 so nothing happend.
I tryed the following things:
- A different usb cable and usb port.
- redownload the Rom Update Utility from this site.
- Hard reset my phone.
Nothing happend a still geth the same error.
Does someone know how to fix this?
Or is there a defferent way to install WP7 on my HTC HD2.
Thanks,
Maarten
read tutorial from my signature
I will try that thanks.
I finished step 0.5 and 1.
But when I am at the line "When phone boot in MAGLDR use:"
I get stuck.
The MAGLDR is installed but when the phone restart i get stuck on the white HTC screen.
Any clou what i should do next?
if not boot, press and hold power button to start magldr....
I tryed it but it wont do anything else than go to the white boot sreen with the Green HTC logo.
I tryed to press the power button for a long time and while he is booting.
Butt notting more than te boot screen shows.
The only way to start the phone again is to remove the battery.
I can get in the "red-green-blue-white screen"
I already tryed to reinstall the magldr. But no luck.
And what do you meen with "in not boot"?
The only thing it does do is boot to this logo and that's it. So its always booting when i turn it on...
"if not boot to magldr"
which HSPL you have installed on device?
try install WM6.5 first then install magldr....
first time when phone boot after magldr flashed, must boot to magldr automatically
I have HSPL2.08
It doesn't start the magldr automatically.
Even if i hold the power button. It just starting with a white boot screen with HTC logo.
Don't know how to install wm6.5 again.
Please help. I would like to use my phone tomorow again.
Edit:
Maybe it's bricked...
boot to threecolor screen and flash WM6.5
Ok I flash back to WM6.5
What to do now?
Follow the instructions again i asume.
Anyway many thanks for your help!!!
yes, after flash, install magldr and continue...
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
you cant flash WP7 without magldr menu (setting options and enable USB flasher in magldr)...
yes this magldr is ok...
http://forum.xda-developers.com/showthread.php?t=893618
to be sure, which version of HD2 you have?
also check data in bootloader screen (threecolor)
Data in bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Version:
I know i don't have the t-mobile version.
HTC HD2 T8585
MasterMaarten said:
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
Click to expand...
Click to collapse
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
hjhjhj said:
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
Click to expand...
Click to collapse
I used the manual from dxdy:
STEP 0.5 - from same beginning, WP7 never or not installed on phone
- If needed (if Android NAND installed, or if any error during flash
process, erase NAND with Task29). Flashing WM6.5 not needed.
- if you have SIM locked phone and want unlock with code, you can this only in WM6.5
- insert formatted microSD card to FAT32 in phone
- flash radio if you want (if flash version available) or use radio upgrade during ROM flashing (put radio file
part00.bin in data.zip file before ROM flash)
STEP 1. - when HSPL and/or MAGLDR not installed
- Flash HSPL 2.08 if needed (put device in bootloader before Flash:
press and hold Volume down + Power button)
- Flash MAGLDR 1.13 (put device in bootloader before Flash:
press and hold Volume down + Power button)
Click to expand...
Click to collapse
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
MasterMaarten said:
I used the manual from dxdy:
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
Click to expand...
Click to collapse
you should do task29 whether you have android or not....between flashes even if wp7. task29 cleans out the memory area where the OS will reside.
as for the radio...radio thread for the TMOUS radio is here:
http://forum.xda-developers.com/showthread.php?t=1111613
more than likely you shouldn't have to flash a radio, but it won't hurt. only have to do it once.
in order to use the rom flash utility...you have to go into magdlr main screen...scroll down to and select 10. Services, then select 5. CleanMBR, and then 4. Uselast24NAND. Finally, back at the main set of options select 5. USB Flash.
Then you kick off your DWI.exe in admin mode.