so i flashed miui on my bravo and it just stays on the m screen. i wiped data, cache and dalvik. thanks
datcambodian said:
so i flashed miui on my bravo and it just stays on the m screen. i wiped data, cache and dalvik. thanks
Click to expand...
Click to collapse
First go into stock recovery and wipe data/factory reset then wipe cache. Go strait into flash mode and flash the 2.2 sbf.
Yep this has happened to me a few times, if you don't know how... reboot while holding down the power and volume down buttons until you see the little android symbol, then press both volume buttons, a menu will open. from there you'll have to do a factory reset. Your still not done... once the wipe is finished youll have to boot again into the boot loader by holding the power and volume up key. from there you'll need to flash the 2.2 sbf with RSD lite.
BravoMotorola said:
First go into stock recovery and wipe data/factory reset then wipe cache. Go strait into flash mode and flash the 2.2 sbf.
Click to expand...
Click to collapse
Excellent, thanks.
This is something I didnt know, I was stock in the M logo after flashing the 2.2 SBF file.
I flashed with RSD Lite but didnt wipe data/factory reset, and wiped it and everything its fine!
ohh so if i wipe the data and cache then flash the stock sbf, miui will work?
datcambodian said:
ohh so if i wipe the data and cache then flash the stock sbf, miui will work?
Click to expand...
Click to collapse
No, all this will do is flash you back to stock android 2.2, MIUI will be erased.
basically you'll have to start all over again with the flashing process.
Make sure that you follow rdannar's instructions EXACTLY when flashing the rom...
I'm assuming your using his latest MIUI rom.
Related
I can reboot into Bootloader, but when I try to boot into Recovery it kicks me back into bootloader. Im using Rom Manager and Clockworks. Any suggestions? Thanks for the help.
Use amon-ra its 10 times better than clockwordmod just download this http://files.androidspin.com/downloads.php?dir=amon_ra/RECOVERY/&file=PC36IMG.zip
drag it to sd card and go to into bootloader thern fastboot and it should say update
Step one, get rid of Rom Manager.
Step Two, flash Amon Ra.
Fixed....
That did it. Thanks guys. Follow up question..do I do a full wipe or Delvick- Cache wipe when flashing Roms? Im used to letting ROM Manager do everything for me that im not 100% sure.
Do a full wipe User Data/Factory reset, then wipe each sub-category, EXCEPT SD Card.
Heck, I re-wipe Cache and Dalvik Cache twice.
jrvjr said:
That did it. Thanks guys. Follow up question..do I do a full wipe or Delvick- Cache wipe when flashing Roms? Im used to letting ROM Manager do everything for me that im not 100% sure.
Click to expand...
Click to collapse
No sweat any time bro
CAN ANYBODY HELP ME PLEASE? PHONE STUCK AT RED M LOGO.
While being on Maniac's 25/04 build I decided to run V6 Supercharger. After I tried to run it got a message that it didn't have superuser rights although I pressed alow. The system got slow and I decided to reboot. It got hanging at the red M logo for a few min. Tried with Vol+- and power and after the blue and green lights it keep hanging on the red M logo. I decided to reflash the nightly but when I pres power button at the blue light I don't get to the CWM menu. Tried it 3 times without any effect. Funny thing is that I can still charge the phone. Does anyone have a idea what to do and spare me starting everything from the beginning? Any help is deeply appreciated!!!
can you boot into the recovery menu and wipe the caches and things??
hold volume down then the power button and this should get you into the stock recovery but you can still do a factory reset in there by doing a data wipe then clear cache and dalvik cache.
Not sure this will work and it will wipe all your data and apps but it may recover the system and make it boot.
Edit: maybe just try to wipe the cache first before doing factory reset, This will keep all your apps and data.
kelbygreen said:
can you boot into the recovery menu and wipe the caches and things??
hold volume down then the power button and this should get you into the stock recovery but you can still do a factory reset in there by doing a data wipe then clear cache and dalvik cache.
Not sure this will work and it will wipe all your data and apps but it may recover the system and make it boot.
Edit: maybe just try to wipe the cache first before doing factory reset, This will keep all your apps and data.
Click to expand...
Click to collapse
Thanks for your answer. Unfortunately wiping cache on stock recovery didn't help, and if I do a factory reset I'll wipe out everything including 2nd init and cwm. It looks like I have to start with RSD and Froyo again.
yeah it sucks loosing all the apps and setting everything back up again but sometimes it has to be done.
I done it alot before I fully knew what I was doing. Flashing roms and RSD with the wrong kernels and all was frustrating to say the least
[/QUOTE] I decided to reflash the nightly but when I pres power button at the blue light I don't get to the CWM menu. Tried it 3 times without any effect. Funny thing is that I can still charge the phone. Does anyone have a idea what to do and spare me starting everything from the beginning? Any help is deeply appreciated!!![/QUOTE]
You get to CWM with VOL DOWN! And you should make a wipe cache /dalwik from CWM, not stock recovery as you did... You can try make a wipe cache, wipe dalwik cache from CWM, but maybe CWM got corrupted because of wipe cache you did from stock recovery...
If so, you you should make a factory reset from stock recovery, and start again with superoneclick, 2ndinit, CWM... Etc
If you flash custom roms you can forget stock recovery, everything is done from CWM! I've not seen my stock recovery for half year, flashing custom roms from CWM...
Good luck!
Sent from my MB526 using XDA
Hi guys!
I have just rooted my Motorola Defy and installed CM7 (7.0.2) into it using the instructions provided by CM wiki. I decided to use ClockworkMod and bootmenu, since I'm on Mac OS X.
Well, everything went fine until I tried to open the Market app, which was not working. Searching the web, I found that the solution could be wiping user data and caché through the recovery mode. As I could not figure out how to start the bootmenu (which I learned later), I did it through the stock recovery mode (using power + volume down)... and since that I can't boot my phone anymore!
I have already tried wiping everything again and installing CM7, but I'm still facing this problem.
Please, anyone have any ideas? I'm almost desperate.
gfreh said:
Hi guys!
I have just rooted my Motorola Defy and installed CM7 (7.0.2) into it using the instructions provided by CM wiki. I decided to use ClockworkMod and bootmenu, since I'm on Mac OS X.
Well, everything went fine until I tried to open the Market app, which was not working. Searching the web, I found that the solution could be wiping user data and caché through the recovery mode. As I could not figure out how to start the bootmenu (which I learned later), I did it through the stock recovery mode (using power + volume down)... and since that I can't boot my phone anymore!
I have already tried wiping everything again and installing CM7, but I'm still facing this problem.
Please, anyone have any ideas? I'm almost desperate.
Click to expand...
Click to collapse
So after doing a factory reset from stock recovery, you say you're trying to install CM7...
Are you installing this from CWM recovery?
Did you wipe Dalvik cache?
Are you using an MB525 Defy or an MB526 Defy+, and is the CM7 zip you're flashing a Defy or a Defy+ build?
>
You've probably not wiped Dalvik it seems.
In CWM recovery, go to Advanced and under that select Wipe Dalvik Cache.
Do yhis and a normal cache wipe every time you flash a ROM update. If you flash a totally new rom like CM10, wipe data also.
krushnam said:
So after doing a factory reset from stock recovery, you say you're trying to install CM7...
Are you installing this from CWM recovery?
Did you wipe Dalvik cache?
Are you using an MB525 Defy or an MB526 Defy+, and is the CM7 zip you're flashing a Defy or a Defy+ build?
>
You've probably not wiped Dalvik it seems.
In CWM recovery, go to Advanced and under that select Wipe Dalvik Cache.
Do yhis and a normal cache wipe every time you flash a ROM update. If you flash a totally new rom like CM10, wipe data also.
Click to expand...
Click to collapse
Hi! Thanks for the reply, and sorry for my English.
Actually, I have already installed CM7 and it worked fine, except for the Market app. Trying to solve this, I have done a factory reset from stock recovery and, since that, CM7 is locked to the boot screen.
And yes, I have installed CM7 through CWM recovery, and I'm using a MB525 Defy.
Well, I have just tried wiping Dalvik Cache, but it seem as if nothing happens when I select this.
Ya wiping Dalvik is very fast, but it will make a lot of difference. Every time you update your ROM, wipe both cache and dalvik.
>
If this didn't solve your problem, try wiping market data and uninstalling market updates. They will reinstall on their own.
>
If even that doesn't work, reflash the GAPPS zip.
BTW, shouldn't you be on CM7.2? That's the latest CM7 as far as I know.
CM7.2:
WhiteRabbit 1.8: http://forum.xda-developers.com/showthread.php?t=1510063
Maniac's builds: https://github.com/maniac103/android_device_motorola_jordan-common/downloads
Quarx's builds: http://quarx2k.ru/cm7-nightly-defy/
krushnam said:
Ya wiping Dalvik is very fast, but it will make a lot of difference. Every time you update your ROM, wipe both cache and dalvik.
>
If this didn't solve your problem, try wiping market data and uninstalling market updates. They will reinstall on their own.
>
If even that doesn't work, reflash the GAPPS zip.
BTW, shouldn't you be on CM7.2? That's the latest CM7 as far as I know.
CM7.2:
WhiteRabbit 1.8: http://forum.xda-developers.com/showthread.php?t=1510063
Maniac's builds: https://github.com/maniac103/android_device_motorola_jordan-common/downloads
Quarx's builds: http://quarx2k.ru/cm7-nightly-defy/
Click to expand...
Click to collapse
How can I wipe market data? It is not an option from CWM...
gfreh said:
How can I wipe market data? It is not an option from CWM...
Click to expand...
Click to collapse
You can only wipe data from an app trough the Apps Manager inside CM7 (that means you have to boot up your phone).
Try flashing the newest CM7.2 and the newest GAPPS for CM7.2.
If the problem persists, return your phone to the old .sbf and start all over again.
thiagoelg said:
You can only wipe data from an app trough the Apps Manager inside CM7 (that means you have to boot up your phone).
Try flashing the newest CM7.2 and the newest GAPPS for CM7.2.
If the problem persists, return your phone to the old .sbf and start all over again.
Click to expand...
Click to collapse
Well, I really can't boot my phone. I just can access bootloader and both recovery modes from stock and CWM (bootmenu).
Do you know how can I flash a .sbf on OS X? I know a lot of programs for Windows, and I also have found a script (sbf_flash.sh) that should work on Mac, but it seems that a lot of people are having problems in OS X (including myself).
gfreh said:
Well, I really can't boot my phone. I just can access bootloader and both recovery modes from stock and CWM (bootmenu).
Do you know how can I flash a .sbf on OS X? I know a lot of programs for Windows, and I also have found a script (sbf_flash.sh) that should work on Mac, but it seems that a lot of people are having problems in OS X (including myself).
Click to expand...
Click to collapse
OK. Go to CWM recovery. Wipe data. Wipe cache. Wipe dalvik.
Now install WhiteRabbit 1.8 or Maniac's CM7.2.
Flash the GAPPS packages linked in the respective threads.
Now AGAIN wipe cache and dalvik.
You should boot normally.
>
As long as you can access CWM, there's no need to reflash the SBF.
krushnam said:
OK. Go to CWM recovery. Wipe data. Wipe cache. Wipe dalvik.
Now install WhiteRabbit 1.8 or Maniac's CM7.2.
Flash the GAPPS packages linked in the respective threads.
Now AGAIN wipe cache and dalvik.
You should boot normally.
>
As long as you can access CWM, there's no need to reflash the SBF.
Click to expand...
Click to collapse
Hi,
I have just reflashed a retailer version using RSD on a friend's computer and it is now back to life... now I'm figuring out what is the best path to follow.
Thanks for the help!
Factory resetting from stock recovery messes up custom Rom!! If You are on custom rom, you have to use CWM for doing wipe etc...
Sent from my Defy green lense using xda-developers app
sa3e1 said:
Factory resetting from stock recovery messes up custom Rom!! If You are on custom rom, you have to use CWM for doing wipe etc...
Sent from my Defy green lense using xda-developers app
Click to expand...
Click to collapse
Yeah... I know that. I just wanted to rollback everything and have the phone back. I'm now studying which is the best ROM for me to install again, but meanwhile, I have my phone working.
Hi guys,
I was running on CM10 11.18. However, wanted to switch back to CM7.2. Phone is now unable to boot up.
This is what I did.
1. Wiped Cache and data in stock recovery.
2. Wiped Cache, dalvik, data in custom recovery.
3. Installed CM7.2 and gapps
When I tried booting it up, the phone was on bootloops.
Then I picked my SEA sbf and flashed it using RDS Lite. However, problem persists. . Can anybody guide me through. I am without a phone now. Help!
You'll have to convert data to ext3.
Install cm10, in boot menu select tools then filesystem tools then convert to ext3
Sent from my MB526 using xda premium
rashsalmn said:
Hi guys,
I was running on CM10 11.18. However, wanted to switch back to CM7.2. Phone is now unable to boot up.
This is what I did.
1. Wiped Cache and data in stock recovery.
2. Wiped Cache, dalvik, data in custom recovery.
3. Installed CM7.2 and gapps
When I tried booting it up, the phone was on bootloops.
Then I picked my SEA sbf and flashed it using RDS Lite. However, problem persists. . Can anybody guide me through. I am without a phone now. Help!
Click to expand...
Click to collapse
Have you tried to wipe data in stock recovery again? (volume down + power on)
If bootloops persist try to flash your sbf again, after flashing go to stock recovery immediately and wipe data again.
Hi there
I seem to have a problem flashing 4.3 roms, actually any rom that isn't stock in general.
Right now I am running syzmel's 20E with 1.3ghz overclock version 3.09.
Back to the problem: this is the steps I take to upgrade to any rom: 1. Download (slimbean, vanir asop) 2. flash v20D (unmodded) 3. Root it using Framaroot 4. Install CWM using L7CWM.zip (extracted, then clicked on flash bootloader, flash recovery, and then booted into recovery) 5. Boot into CWM 6. Click on factory reset and reset 7. Go into mounts and storage and format /system 8. Go to advanced and wipe dalvik cache. 9. Flash either 4.3 version slimbean or Vanir ASOP (tell me which is better) 9. Flash gapps (Slimbean: Slim AIO minimal Gapps, Vanir: 4.3 minimal Gapps which is found in the Vanir ASOP page) 10. Factory reset again 11. Wipe dalvik 12. Reboot
Now as soon as I reboot, either it stays rebooting, or boots once and when you reboot it stays at the boot loading page (slimbean logo, or android logo) (In other words, once you go black, you never go back. Not being racist, just saying once it blacks out it doesn't work no more). So i retry. And then I give up and stick on v20E.
So please suggestions?
Also ignore my signature
AsianFoodRules said:
Also ignore my signature
Click to expand...
Click to collapse
Are you sure it wipes made correctly?
Danm, yes I'm sure.
Why you dont format cache and data & data/media ?
Did you try boot without gapps... Sometimes bad gapps cause a lot of problems
Sent from my LG-E610 using Tapatalk
When you factory reset it clears cache automatically. I'll try without Gapps.
wipe data,wipe cache wipe dalvic cache
AsianFoodRules said:
When you factory reset it clears cache automatically. I'll try without Gapps.
Click to expand...
Click to collapse
How do you factory reset? Factory Reset is NOT only wipe data
raul338 said:
How do you factory reset? Factory Reset is NOT only wipe data
Click to expand...
Click to collapse
Factory reset in CWM clears cache automatically.
....Anyway, I finally fixed it. Turns out I had to wipe EVERYTHING. Including /data and /data media. Thanks anyway guys.
LG Optimus L5 E610 - CWM Bootlooping
Basically I inserted a pre-rooted firware into my lg phone using 20d+root + cwm.kdz, everything was fine including the flashing, I some how got the the CWM recovery and done everything such as wiping cache, etc, but the problem was before and after the wiping, etc, is that everytime i press power button it turn off and on and back on to the CWM recovery screen not home screen with apps, etc.
I am really fustrated, please Help!:crying: