With any gingerbread rom the wifi connection is disconnecting at every 1:30/2 min...
Can you help me?
Alex4utm said:
With any gingerbread rom the wifi connection is disconnecting at every 1:30/2 min...
Can you help me?
Click to expand...
Click to collapse
Check your router Properties .make sure you have disabled 802.11/b/g/n.Make sure that is 802.11/b/g
@lotus13: tnx for the advide... but this is not the problem
1.i have a G type router
2.is working perfectly on froyo
Can anyone help me?
sorry for duble post but i realy need some help
Alex4utm said:
Can anyone help me?
sorry for duble post but i realy need some help
Click to expand...
Click to collapse
It's something no one really can help you with. There are some incompatibilities with some routers/configurations.. try changing your encryption type on the router (WPA to WPA2 or vice versa, or even TKIP to AES or vice versa). Use WEP if you need to.. just block devices by mac address for security reasons
EDIT: just remember to delete the entry on your phone and make a new one every time you make changes
@Nikkopt
I tried even with no security... and useless
PS in froyo is working perfectly
Related
simple enough i cant connect to my home wifi using my wizard.
It is able to find the network, and says it is "available" but when i press connect it goes ... "connecting" and then returns to "available"
Ive read through most threads on this forum and no one seems to have this problem, i have changed to power setting to best performance as well.
However i dont know what to put in the Enrole tab...? this is porbably the source of my problem.
please help me!
Hi, The problem could be the speed of your router connection. Set it to be able to connect to b end g clients.
In my case this worked. I Had the same problem you descibed, so give it a try!
Gert-Jan
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
jimmy_boy said:
thanks for the suggestion, but im running three computers over this wifi network already, and two have "g" wifi cards and one has a "b" card. so i dont think this is my problem.
Click to expand...
Click to collapse
My first problem was forgetting I'd got MAC filtering active on the AP. Once I'd added the Wizard's mac address things got better.
What encryption are you running?
Dox
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Exact same problem as you jimmy_boy.
Quite frustrating not being able to connect to the wireless network.
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
gdap said:
I am wondering if it is a rom-specific problem...I am using an O2 XDA mini S, on vodafone. Would this cause the wifi to lock up?
Click to expand...
Click to collapse
Shouldn't do, I've got the same setup here and WiFi is fine.
gdap said:
Unsure as what to try next. If someone could shed some light on the situation it would be much appreciated.
Click to expand...
Click to collapse
If I have the power on anything but Best Performance, I get flakey throughput, even right on top of the AP. Both my laptop and iPAQ hx4700 will find the AP from all corners of the house, whereas the Wizards both want better signal strength before they'll connect.
Like I asked jimmy_boy, what encryption are you running?
Regards
Dox
I also experienced this problem and what I did to fix it was, changing the channel on my access point. I stepped through each channel stopping and trying it until I found a channel that worked.
I turned the encryption off. If I goto "Network adapters" it shows the name of my connection and "available", but when I goto "wireless lan" tab, it shows me no information on the connection at all.
Tried setting the power setting to max as well. Still nothing.
Would appreciate it, if someone could step by step explain how to do this.
thanks in advance.
I also have the exact same problem as described in the first post. I do have MAC filtering on, but I've also added the MAC of my Wizard.
I haven't tried changing the channel though...
yeah gdap thats exactly what i get, im running WEP encryption, but ive entered the network key into the wizard as well, i know this is correct, becasue i entered it in wrong on purpose to see if there is an error message and there is. So it knows the network key the network is available yet it stil wont connect!!!!!
Any ideas??
im running the uk t-mobile rom so i dont think its the roms problem.
changing the channel of all 4 computers ... oh the effort
but i might give it a shot
Same problem here
I can connect with my Exec, but not with my gf's Wizard. Same symptoms. It says the network is available if I get the key right, but then won't connect. Please help!
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
ch475 said:
My Qtek 9100 can connect to my encrypted 802.11b AP, get's a valid IP address from the DHCP server, but is not able to communicate with TCP/IP. Also the other members of the wireless LAN can not see my Qtek nor is PING responding. PWLAN from Swisscom here in Switzerland is working well, the login page is showing up.
ch475
Click to expand...
Click to collapse
I get the same issue: my 9100 connects to my router and receives a valid IP address. Even though the IP Address/Subnet Mask are valid, I cannot seem to get any access to the internet via wifi. I find this very frustrating, so if anyone has any suggestions, I'd appreciate it very much.
Exact same problem myself, but I think I only have my router set at 'G', where the o2 Mini is 'b' only.
Connected to both of my Morrisons supermarkets wireless network tho,they're both on 'b'........ no encryption in either of them.
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Check on the setup page on your router that MAC address filtering is not enabled. If it is you will need to add the MAC address of your Wizard's Wlan card in order to connect.
Often forgotten but excellent security feature is MAC address filtering
Sorted, as I thought, I had to set router to transmi b as well as g
No need to flash the Rom now :twisted:
SantfeKuss said:
jimmy_boy said:
problem solved!!!!!
stupidly i forgot to add the MAC address of my wizard :shock:
thanks for the help Dox
Click to expand...
Click to collapse
Please explain
Click to expand...
Click to collapse
On your wifi router settings on your computer, you have to add the MAC address of the wizard, which can be found by , settings, advanced tab on your wizard.
Hi,
What is the registry setting (if any) to change the WM 6.5(.x) setting from WiFi channel 1 to any other channel. This is an important setting to get the HD2 WiFi Router to work also in an environment with heavy WiFi traffic around.
Sorry that my attempts to search for a solution has failed. Please feel free to flame me. But when this is done, please post llink to relevant thread, if any.
Regards,
artreides
*bump*
Hi,
I had a problem where no wireless device would pick up my HTC HD2's wireless router. In the end I changed the WiFi channel of my office router and all worked perfectly, so if someone has the answer to how to change the wireless channel on WM6.5 please post it
Maybe the channel gets assigned when you hard reset the phone as I had to change my WiFi router away from channel 11, so I assume the phone is on 11.
Cheers
surely its all done via the router not the phone, the router broadcasts on channel X and the device just accepts on that channel
Is there any solution to this issue? would love to know the answer.
pogipoints said:
Is there any solution to this issue? would love to know the answer.
Click to expand...
Click to collapse
check answer in post #3, the one above yours
Richy99 said:
surely its all done via the router not the phone...
Click to expand...
Click to collapse
@Richy99 & p107r0: can you read in English with understanding?
What about the router function embedded in HD2? artreides is asking about HD2 WiFi Router so please don't reply until you know how to change its channel settings or you've got something really valuable to say
exbros said:
@Richy99 & p107r0: can you read in English with understanding?
What about the router function embedded in HD2? artreides is asking about HD2 WiFi Router so please don't reply until you know how to change its channel settings or you've got something really valuable to say
Click to expand...
Click to collapse
my bad
....
No worries...
... but, going back to the subject: anybody knows how to change it? I don't believe it is locked down to the hardware so there has to be a way to change it software-wise... anybody?
WMwifiRouter has a setting for changing channel but the inbuilt router does not & I have not seen a reg value linked to it in my registry browsing ...
hey guys well i used wildpuzzle v0.8,cm7 nightlies 8-11-14,rc1 and rc2 till now.And all with 4.1 hcdr kernel.(4.2 does not work on my wildfire i dunno why )
well the problem is that the wifi restarts itself all the time(with all those roms).for example i enable the wifi and it connects then i start downloading programs or surf on the web and the connection disappears in a few minutes and reconnects again and again.it makes me sick bcs of interrupting my downloads from the market . what is the reason of that problem and the solvation? thx a lot everyone who reads this and helps me...
maybe you can try static ip address replace obtained by router.
souling said:
maybe you can try static ip address replace obtained by router.
Click to expand...
Click to collapse
i tried it out too but nothing different as the result
Try my rom here : http://forum.xda-developers.com/showthread.php?t=976068
Maybe it will solve your problem. Wi-Fi TETHERING however doesn't work in this release. I am going to launch an update later on this evening.
Maybe disable wifi sleep will help ?
Funnnny said:
Maybe disable wifi sleep will help ?
Click to expand...
Click to collapse
how can i do it?
h4oxer said:
Try my rom here : http://forum.xda-developers.com/showthread.php?t=976068
Maybe it will solve your problem. Wi-Fi TETHERING however doesn't work in this release. I am going to launch an update later on this evening.
Click to expand...
Click to collapse
yeah when you will release the update i will give it a try
Moved to general
hi all, i'm here because i think here there will be someone expert that can tell me why my htc hd2 doesnt recognize my new tp link router. never happened before. it doesent even see the net, also manually adding ssid and the security stuff it doesnt collaborate. the router model is: tp link TD-W8961ND, 2.4 Ghz... i see it is a NAT router, what does it mean? , should i change some settings in the modem's configuration? thanks
p.s. sorry for bad english
hi all, i'm here because i think here there will be someone expert that can tell me why my htc hd2 doesnt recognize my new tp link router. never happened before. it doesent even see the net, also manually adding ssid and the security stuff it doesnt collaborate. the router model is: tp link TD-W8961ND, 2.4 Ghz... i see it is a NAT router, what does it mean? , should i change some settings in the modem's configuration? thanks
p.s. sorry for bad english
OsarcotL said:
hi all, i'm here because i think here there will be someone expert that can tell me why my htc hd2 doesnt recognize my new tp link router. never happened before. it doesent even see the net, also manually adding ssid and the security stuff it doesnt collaborate. the router model is: tp link TD-W8961ND, 2.4 Ghz... i see it is a NAT router, what does it mean? , should i change some settings in the modem's configuration? thanks
p.s. sorry for bad english
Click to expand...
Click to collapse
*Before I begin, have you tried turning it(the router) off and then back on?*
Are you able to see/connect to the router from other devices? (laptop? another phone? gaming device?)
What security settings do you have set on the router?
Do you have "Broadcast SSID" option (or similar) enabled?
Is your HD2 able to see OTHER wifi networks and connect to them?
Do you have on the router the filtering function active with mac addresses ?
Marvlesz said:
*Before I begin, have you tried turning it(the router) off and then back on?*
Are you able to see/connect to the router from other devices? (laptop? another phone? gaming device?)
What security settings do you have set on the router?
Do you have "Broadcast SSID" option (or similar) enabled?
Is your HD2 able to see OTHER wifi networks and connect to them?
Click to expand...
Click to collapse
ok, in the order... (obviously i tried to on/off the router)
YES, i am connected through PC, htc one and apple ipod.
what do you mean with "security" ? i have WPA2-PSK encryption and AES authentication, SSID and WPS enabled, mac addresses filter disabled, do you need anything else?
i have the option "SSID visibility" enabled, is it comparable? should i turn it off? any consequences?
yes, i connetected it to other wireless "n" router and "g" router without poblems
OsarcotL said:
ok, in the order... (obviously i tried to on/off the router)
YES, i am connected through PC, htc one and apple ipod.
what do you mean with "security" ? i have WPA2-PSK encryption and AES authentication, SSID and WPS enabled, mac addresses filter disabled, do you need anything else?
i have the option "SSID visibility" enabled, is it comparable? should i turn it off? any consequences?
yes, i connetected it to other wireless "n" router and "g" router without poblems
Click to expand...
Click to collapse
Okay, what channels do you have the router set to? And what channel width?
If you have the option "Auto", set both (channels, and channel width) to it. Then restart the router and try connecting now.
Edit: The channel settings should be in the "Wireless" section.
Marvlesz said:
Okay, what channels do you have the router set to? And what channel width?
If you have the option "Auto", set both (channels, and channel width) to it. Then restart the router and try connecting now.
Edit: The channel settings should be in the "Wireless" section.
Click to expand...
Click to collapse
ok, so channel is already set on AUTO, on channel width i have 20 mhz ad 20/40 mhz, actually set on 20/40
EDIT: tried to switch to 20 mhz but no changes
OsarcotL said:
ok, so channel is already set on AUTO, on channel width i have 20 mhz ad 20/40 mhz, actually set on 20/40
EDIT: tried to switch to 20 mhz but no changes
Click to expand...
Click to collapse
Okay, leave the width to 20/40. And set the channel to 1 or 2 and try again.
There are two android apps, one called "Wifi Analyzer" and "WiFi Manager". Download either of them and try scanning for networks from there.
Marvlesz said:
Okay, leave the width to 20/40. And set the channel to 1 or 2 and try again.
There are two android apps, one called "Wifi Analyzer" and "WiFi Manager". Download either of them and try scanning for networks from there.
Click to expand...
Click to collapse
tried with channel 1 and 2, nothing seems to work :crying: ...also the apps dont recognize...
p.s. even if i use wp7 the hd2 doesnt recognize it
OsarcotL said:
tried with channel 1 and 2, nothing seems to work :crying: ...also the apps dont recognize...
p.s. even if i use wp7 the hd2 doesnt recognize it
Click to expand...
Click to collapse
Hmm .. now I'm lost .... If the apps can't pick up the network, I don't know how else you can fix the problem .. sorry..
Marvlesz said:
Hmm .. now I'm lost .... If the apps can't pick up the network, I don't know how else you can fix the problem .. sorry..
Click to expand...
Click to collapse
Don't worry and thanks for trying... Maybe there are some hardware incompatibilities we don't know.... Is there any thread where you think someone can help me?
OsarcotL said:
Don't worry and thanks for trying... Maybe there are some hardware incompatibilities we don't know.... Is there any thread where you think someone can help me?
Click to expand...
Click to collapse
Not really, and I don't really know .. You could try asking for help in the main Q&A forums ... That is this one: http://forum.xda-developers.com/android/help