sorry did not know it doesn't allow images but its stuck on the screen before the clock mode recovery so were it says android in the left bottom
I have looked everywhere. How do I get a lock screen on my kindle fire where I installed CM7. When I boot it automatically goes to home screen.
Look under CyanogenMod settings > Tablet tweaks and uncheck "Disable lockscreen."
Sorry. Was a stupid mistake. Flashed CM9 and my fire kept re-booting
please help, ran kfu tried to change boot to normal...always says unknown for boot mode. I keep getting the system cannot find the path specified. Then it says the kindle has been told to boot in normal mode but it wont go past the kindlefire screen. I know someone can help...please help!!
Hi. My Phone's display starts with a green screen. After a while it not green any more,
but more white. T
he buttons do respons . but i cant see my home screen, recovery or the download boot modus.
Anyone with advice?
I realy don't no what tot do....
Do a hard reset and factory restore your phone to its original settings. In this way, you will remove any third party app and you might get rid of this issue.
Thanks for Ur response
But how wil i be able tot set it to Factory mode?
I cant see anything on my screen. So cant unlock my screen.
And i cant see anything else
in recovery mode i alsof see only green
Hello,
someone can explain to me how I can upload a custom boot logo?
In car settings menù, I select LOGO SETTINGS and after LOGO SELECTED: 0. Then I upload a logo by pendrive but at device restart it don't appear...
Nothing?
After selecting the logo restart the android head unit from factory settings and check the new bootlogo would appear.
Hello Shreyas17.
What does it mean "from factory settings"?
Thank you
00ice00 said:
Hello Shreyas17.
What does it mean "from factory settings"?
Thank you
Click to expand...
Click to collapse
Once you set the boot logo goto car setting in that see for factory setting use password "8888" then find reboot device . Even i have faced similar issues after selecting boot logo the message used to appear boot logo successfully set but then there was no boot logo nor boot animations the device directly used to start with home screen.
I try! There are other passwords? 8888 not work
try these codes
66668888
126
123456
8888
7890
3368
5678
518
121212
3711
1688
7758782
7758521
I would also like to know did you upgrade your android head unit to android 9.0?
All passwords are invalid
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
00ice00 said:
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
Click to expand...
Click to collapse
okay then just check on playstore you might find an app that will help you reboot your device after setting the logo just make sure the logo has 1024X600 resolution max.
---------- Post added at 03:37 AM ---------- Previous post was at 03:22 AM ----------
00ice00 said:
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
Click to expand...
Click to collapse
okay can you guide me if i want to upgrade my android head unit to android 9 firmware ?
also do you face issues in radio reception sometime the radio signals go blank and are recovered after sometime.
Shreyas17 said:
After selecting the logo restart the android head unit from factory settings and check the new bootlogo would appear.
Click to expand...
Click to collapse
Hi there,
i am also facing same issue, I also tried this. After reboot, it show car logo and then animation logo of android, but it show only once. I also tried, by switching off the car for almost 5 mintues and then turn ON the switch but all in vain. It takes display directly to the Home Screen without showing Boot logo.
Hi !
I also have such a device alps 8227L_demo
but I have to throw it out because the Boot logo is gone and I don't want to turn it on
When turned on, the display only flashes once and tries to start again
I have successfully uploaded custom bootlogo on 8227l_demo . Make sure the bootlogo resolution is 1024x600 and it must be in bmp format.
To user facing no boot animation after setting boot logo do the following:
Go to android setting --> apps
search for bootlogo selector apk and clear the data.
now go and set the desired boot logo after getting the message"Boot logo set successful" goto to factory setting and enter factory code(in my case it's : 8888)
and reboot your device.
Even i have faced this issue after setting boot logo the device used to directly display home screen i.e no bootlogo nor boot animation.
But now its solved.
Follow up
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Dfj1989 said:
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Click to expand...
Click to collapse
this issue might occur because your device is going in sleep mode and not powering off . You can probably set these settings in factory mode
Shreyas17 said:
this issue might occur because your device is going in sleep mode and not powering off . You can probably set these settings in factory mode
Click to expand...
Click to collapse
Can't find anything in factory settings - but then again, don't really know which setting to look for. But you're probably right.
Bonjour
hamzakhan0269 said:
Hi there,
i am also facing same issue, I also tried this. After reboot, it show car logo and then animation logo of android, but it show only once. I also tried, by switching off the car for almost 5 mintues and then turn ON the switch but all in vain. It takes display directly to the Home Screen without showing Boot logo.
Click to expand...
Click to collapse
Bonjour, tu va sur paramètres après accessibilité après décocher le démarrage rapide?
Dfj1989 said:
Follow up
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Click to expand...
Click to collapse
You likely have a radio that uses the newer fastboot technology. The only way it fully reboots is if battery power is lost or maybe it sits a long time. The advantage in so doing is you don't have to wait 30 seconds or so for startup each time. AFAIK, this cannot be disabled.
My new PX6 Sadocom does this. Also for Android 10, changing the logo is a little different as the program referenced did not exist on my radio:
I first created a custom logo using the 1024x600 and BMP format suggested above. I saved it to a USB drive and connected it to the USB cable of the radio.
In the settings screen, I entered my password to get to the boot logo screen. When the numerous logos are displayed, I touched the search (magnifying glass) icon, and it defaulted to the USB drive. My custom logo was there, so I selected and saved it.
I had to disconnect the battery to fully reboot, but the logo is there and looks good.
[QUOTE = "Shreyas17 ، النشر: 83232873 ، العضو: 8584137"]
قد تحدث هذه المشكلة لأن جهازك يعمل في وضع السكون ولا يتم إيقاف تشغيله. ربما يمكنك ضبط هذه الإعدادات في وضع المصنع
[/اقتبس]
كيف اللغى وضع السكون
I know this is an old thread but i figured i post the answer here for those searching this out in the future.
Go to "car settings"->"factory settings" password "8888"->Engineering test debugging" password "26959910".
This brings you to a menu to which you can modfiy sleep settings.
Enjoy having to wait for your headunit to boot every time you start you car.
Amazing