Hello,
someone can explain to me how I can upload a custom boot logo?
In car settings menù, I select LOGO SETTINGS and after LOGO SELECTED: 0. Then I upload a logo by pendrive but at device restart it don't appear...
Nothing?
After selecting the logo restart the android head unit from factory settings and check the new bootlogo would appear.
Hello Shreyas17.
What does it mean "from factory settings"?
Thank you
00ice00 said:
Hello Shreyas17.
What does it mean "from factory settings"?
Thank you
Click to expand...
Click to collapse
Once you set the boot logo goto car setting in that see for factory setting use password "8888" then find reboot device . Even i have faced similar issues after selecting boot logo the message used to appear boot logo successfully set but then there was no boot logo nor boot animations the device directly used to start with home screen.
I try! There are other passwords? 8888 not work
try these codes
66668888
126
123456
8888
7890
3368
5678
518
121212
3711
1688
7758782
7758521
I would also like to know did you upgrade your android head unit to android 9.0?
All passwords are invalid
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
00ice00 said:
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
Click to expand...
Click to collapse
okay then just check on playstore you might find an app that will help you reboot your device after setting the logo just make sure the logo has 1024X600 resolution max.
---------- Post added at 03:37 AM ---------- Previous post was at 03:22 AM ----------
00ice00 said:
All passwords are invalid
How I can upgrade to Android 9?
My headunit is rooted
Click to expand...
Click to collapse
okay can you guide me if i want to upgrade my android head unit to android 9 firmware ?
also do you face issues in radio reception sometime the radio signals go blank and are recovered after sometime.
Shreyas17 said:
After selecting the logo restart the android head unit from factory settings and check the new bootlogo would appear.
Click to expand...
Click to collapse
Hi there,
i am also facing same issue, I also tried this. After reboot, it show car logo and then animation logo of android, but it show only once. I also tried, by switching off the car for almost 5 mintues and then turn ON the switch but all in vain. It takes display directly to the Home Screen without showing Boot logo.
Hi !
I also have such a device alps 8227L_demo
but I have to throw it out because the Boot logo is gone and I don't want to turn it on
When turned on, the display only flashes once and tries to start again
I have successfully uploaded custom bootlogo on 8227l_demo . Make sure the bootlogo resolution is 1024x600 and it must be in bmp format.
To user facing no boot animation after setting boot logo do the following:
Go to android setting --> apps
search for bootlogo selector apk and clear the data.
now go and set the desired boot logo after getting the message"Boot logo set successful" goto to factory setting and enter factory code(in my case it's : 8888)
and reboot your device.
Even i have faced this issue after setting boot logo the device used to directly display home screen i.e no bootlogo nor boot animation.
But now its solved.
Follow up
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Dfj1989 said:
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Click to expand...
Click to collapse
this issue might occur because your device is going in sleep mode and not powering off . You can probably set these settings in factory mode
Shreyas17 said:
this issue might occur because your device is going in sleep mode and not powering off . You can probably set these settings in factory mode
Click to expand...
Click to collapse
Can't find anything in factory settings - but then again, don't really know which setting to look for. But you're probably right.
Bonjour
hamzakhan0269 said:
Hi there,
i am also facing same issue, I also tried this. After reboot, it show car logo and then animation logo of android, but it show only once. I also tried, by switching off the car for almost 5 mintues and then turn ON the switch but all in vain. It takes display directly to the Home Screen without showing Boot logo.
Click to expand...
Click to collapse
Bonjour, tu va sur paramètres après accessibilité après décocher le démarrage rapide?
Dfj1989 said:
Follow up
Did anyone ever figure this out? I have the same radio but doesn't "boot" when I turn on the car. Just go straight to startscreen. If I reboot from factory menu it shows my logo but only because it rebooted. It doesn't reboot when I turn on the car.
Click to expand...
Click to collapse
You likely have a radio that uses the newer fastboot technology. The only way it fully reboots is if battery power is lost or maybe it sits a long time. The advantage in so doing is you don't have to wait 30 seconds or so for startup each time. AFAIK, this cannot be disabled.
My new PX6 Sadocom does this. Also for Android 10, changing the logo is a little different as the program referenced did not exist on my radio:
I first created a custom logo using the 1024x600 and BMP format suggested above. I saved it to a USB drive and connected it to the USB cable of the radio.
In the settings screen, I entered my password to get to the boot logo screen. When the numerous logos are displayed, I touched the search (magnifying glass) icon, and it defaulted to the USB drive. My custom logo was there, so I selected and saved it.
I had to disconnect the battery to fully reboot, but the logo is there and looks good.
[QUOTE = "Shreyas17 ، النشر: 83232873 ، العضو: 8584137"]
قد تحدث هذه المشكلة لأن جهازك يعمل في وضع السكون ولا يتم إيقاف تشغيله. ربما يمكنك ضبط هذه الإعدادات في وضع المصنع
[/اقتبس]
كيف اللغى وضع السكون
I know this is an old thread but i figured i post the answer here for those searching this out in the future.
Go to "car settings"->"factory settings" password "8888"->Engineering test debugging" password "26959910".
This brings you to a menu to which you can modfiy sleep settings.
Enjoy having to wait for your headunit to boot every time you start you car.
Amazing
Related
hi everybody.
I got this system a few days ago.
When I try to update the car icon, the device need restart but stay on a black screen immediately after the logo indicated. (says wellcome nav system or Something like that)
Need to disconnect the battery and wait a few minutes and only then the system goes on.
Today the system remained on a black screen no matter what I do.
I tried to enter recovery but I do not know the keys order.
I tried everything listed here but it does not work.
This model may get to recovery in a different way?
Is anyone know a system updates for this unit?
thanks very much
http://www.autopumpkin.com/car-dvd-...-gps-obd2-wifi-3g-steering-wheel-control.html
Hi guys,
Something strange is happening to my zenfone. When I want to switch it off, and I click the "power off" option my phone activates offline mode, then the screen just dimms instead of going full black. When I try to switch it on again, everything is okay except that my phone doesn't vibrate and goes straight to boot animation, there is no loading system circle, phone boots up in 3 seconds. I don't need to enter pin too. When I choose restart option everything goes as normal. Any help is appreciated
Zf5
Not rooted
Android 4.4 kitkat
Gumak11 said:
Hi guys,
Something strange is happening to my zenfone. When I want to switch it off, and I click the "power off" option my phone activates offline mode, then the screen just dimms instead of going full black. When I try to switch it on again, everything is okay except that my phone doesn't vibrate and goes straight to boot animation, there is no loading system circle, phone boots up in 3 seconds. I don't need to enter pin too. When I choose restart option everything goes as normal. Any help is appreciated
Zf5
Not rooted
Android 4.4 kitkat
Click to expand...
Click to collapse
Its a common issue.
Just wipe everything from bootloader, like system, data,cache, then flash recovery.img from .44 update and then reboot to recovery and sideload the .54/.540 update.
everything will be fixed.
Me and my friend faced the same issue about a year and a half ago,and this fixed the issue.
What does 'sideload' mean? Sorry I am new here :v
Can anyone tell me how I can change the boot logo of my Erisin.
When I turn it on I'd like the VolksWagen logo to appear.
I tried to follow many online procedures but the factory menu is always different.
I also made the video of my menu but xda doesn't let me publish the link.
To watch the video search on youtube:
"Erisin es7615v no boot logo change"
Hallo everybody,
i have a rpoblem with may CARPAD III NR5210.
IT's a RK3188 with STM32 chip. I try to flash XDAUTO rom, it works. Monday i reflash because i don't flash with clear system and some error appears. During the proced i wipe all (system, data, etc..) but the battery broke down.
Now i can't put it in recovery mode. Even start teh boot logo XDAUTO in sreeen.
I try to push reset button, one time, two times, for 20 seconds and more, but notting works; boot logo appares in the screen.
I try to disconnect to battery of the car for a night. No works, boot logo starts.
I try to put 5 fingers in the screen during the start, no works, boot logo starts.
i try to connect the OTG port in my PC to flash with RKTOOL, but the unit isn't recognized (it's works 2 month ago).
it's seem brick ;( ;( ;(
Only procedure that seem work is SD BOOT procedure. I try whit the SD BOOT procedure that i found in internt for PX5 MTCD unit, and no boot logo starts... only a illuminated black screen, but nothing appares becouse i think i don't have the right software into the SD.
Please, help me.
Many many many thanks
Some one have some procedure that can halp me?
Please, i don't know no other way to resolve this ptoblem.
Hi, I just installed on my mazda 3 first gen an android system K2001N but for some reason I can't get the boot logo list, I already connect the system to wifi but there is no logo to select, and I think that mostly of the functions are blocked, is there any an additional setting that I have to do?
You can try to upload your picture in .png format from under the root at: /system/tsoem/logoset/1024x600 (or other dimension)
or if you mean the boot animation you can see on /system/media/bootanimation.zip and replace the picture in the animation
you must have rooted device