Database Users

Stuck on "GO GO GO!" in AD Recovery.

I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.

itzstevo said:
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
Click to expand...
Click to collapse
first off once you do HSPL you don't ever need to do it again, and the radio you flashed was 2.15.50.14? once you flash the radio you don't need to reflash it again, unless changing to a different one.
Now I would suggest to start back at task29,
then MGLDR 1.13,
redownload the partition in case of any corruption,
are you using win xp or 7?
if on win 7 right click on the daf and run as admin.
I know there's not much difference from what you said but maybe you have a corrupted download and it's messing things up.

Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users

I'm using windows vista & i tried the HD2 NAND toolkit still the same result. :/

so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
Then you have a hardware issue with the phone itself!
Sent from my HyperDroidCM7 HD2

sebasmiles said:
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
Click to expand...
Click to collapse
Thanx a lot, I solved problem "stuck on GO GO GO!" with HD2 NAND Toolkit!

I often encounter this problem,too

I really dont know sorry for u

hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
i'm having exactly the same problem, i'm trying to install android because if i install the stock rom it stucks at the htc logo an when i install android it works for a few minutes but then it freezes
i've searched on google for it and they say that it can be a overheating problem

It was a touchscreen issue when i had this error. I had replaced the digitizer but the ribbon came loose during repair. If, when you boot to the tricolor screen (hold volume down + power), you dont see cotulla hspl 0x40 or 0x50 you have a touch screen problem.
Sent from my GT-N8013 using Tapatalk 2

stuck on go go go!
tanny1 said:
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
Click to expand...
Click to collapse
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.

jimani said:
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
Click to expand...
Click to collapse
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.

Robbie P said:
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Click to expand...
Click to collapse
Hi Robbie,
Actually I tried every thing:
At the first time it was a touchscreen issue, I replaced it and try to reinstall the android rom; i used the toolkit 4.3 to flash.
1.HSPL3
2.WIPE(Task 29)
3.Radio-Leo-2.15.50.14
3.MAGLDR 1.13
4.Repartition 280MB for system, 5 for cash.
But when I tried to go in AD RECOVEY, my phone stuck 1234 GO,GO,GO.
I perform this steps on two htc hd2( one is T-Mobile) but no success.
Please help.
Justin.

did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?

Robbie P said:
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Click to expand...
Click to collapse
Hi Robbie,
Yes I installed hspl 2.08 using hspl3.
After DFT MAGLDR Boot loader is loaded I install the partition after that I go in ad recovery to load the Clockwork Mod Recovery then... stuck!
When I tried to boot from the sd card it's say : SD open kernel failed .
I don't know may be I'm mixing things. can you provide me a clear step by step doc?
Thanks in advance.
Justin.

Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.

Robbie P said:
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Click to expand...
Click to collapse
Yes I tried many ways: hd toolkit, tools separately,...
also I tried to specify the folder that the zImage and initrd.gz files are in,but still giving that horrible message:SD open kernel failed

[Q] HELP stuck at MAGLDR leo

i tried to flash an android NAND for the 1st time and i installed the radio 2.15.50.14 and the HSPL 4 and MAGLDR 1.13 and i did as they said to flash the rom n my HD is stuck at the MAGLDR screen telling me NAND kernl open failed !!
thanks in advance

Yes i know what you forgot
Now u have magldr
But you need a ROM to flash which is loaded by magldr
Go to the nand android section and choose a rom you want to have . There are several ways to install a rom.. One is to flash clockworkmod (just search a little bit and you will find a how to )), with it u can flash a rom from your sd card
There is much to say, but u should read the stickie thread where you will get all information you have to know
Sent from my HTC HD2 using XDA Premium App

I have same problem with my phone,i have cwm and still didn't work because cwm can't see the zip file on mine sd card?what's the solution for this?
Have on old desire rom running at this moment flashed through daf,but that is desire build 2.2.
Open for any suggestions cause already cost 1 night sleep lol
Thanx in advance.

ikkeenjij36 said:
cwm can't see the zip file on mine sd card?what's the solution for thi.
Click to expand...
Click to collapse
2 possibles,, either bad download, download it again, or,, you select choose zip from sd card, and not install update.zip

You should try to install the zip manually?! there is an option to install a zip of you choice.. Browse for your zip and install it..
Sent from my HTC HD2 using XDA Premium App

samsamuel said:
2 possibles,, either bad download, download it again, or,, you select choose zip from sd card, and not install update.zip
Click to expand...
Click to collapse
You were faster
Sent from my HTC HD2 using XDA Premium App

TRied to zip from sd but it cant find the zip file,that's my prob.
Also tried different rom's but dind't changed allso,so getting bit frustrated on this issue

ikkeenjij36 said:
TRied to zip from sd but it cant find the zip file,that's my prob.
Also tried different rom's but dind't changed allso,so getting bit frustrated on this issue
Click to expand...
Click to collapse
Hi,
Each ROM will probably have different CWM partitions to flash before you try loading the ROM.Make sure you flash correct one.
Then make a note of the ROM.CWM does not find the ROM for you.
In ad recovery,choose install ROM from zip,then choose ROM from zip,Then scroll up and down with volume button until you find you zip.
Also make sure you place zip on root of your card using a card reader.
This will avoid any corruption of data in the transfer process.

can anyone post a link to the roms flashed be MAGLDR only ??

doddger said:
can anyone post a link to the roms flashed be MAGLDR only ??
Click to expand...
Click to collapse
Hi,
Check here:
http://android.hd2roms.com/
to see what's available.
Most ROMS can be flashed via magldr.

ikkeenjij36 said:
TRied to zip from sd but it cant find the zip file,that's my prob.
Also tried different rom's but dind't changed allso,so getting bit frustrated on this issue
Click to expand...
Click to collapse
Just currious, check your sd card, since you have CWR windows do partition by CWR, use card reader to copy your rom then put on phone, ensure you have zip file extension not rar/7zip or other compression type.

I have a problem too.
For some reason I can install the Wp7 DAF ROM
but cannot install the ANdroid versions of DAF roms
also phone straight goes to Magldr
even pressing the volume down while starting wont take it to the bootloader
please help.

backlashsid said:
I have a problem too.
For some reason I can install the Wp7 DAF ROM
but cannot install the ANdroid versions of DAF roms
also phone straight goes to Magldr
even pressing the volume down while starting wont take it to the bootloader
please help.
Click to expand...
Click to collapse
Hi,
Does the volume key work in WP7?

malybru said:
Hi,
Does the volume key work in WP7?
Click to expand...
Click to collapse
sorry forgot to say !! YES it does...I checked in the MAGLDR menu !

"nand kernel open failed" Make sure you downloaded the MAGLDR version, and not the CLK version

yz.hd said:
"nand kernel open failed" Make sure you downloaded the MAGLDR version, and not the CLK version
Click to expand...
Click to collapse
i do have the MAGLDR version !
its just that the ROMS get stuck at the GO GO GO screen
and Bootlaoder wont load !

backlashsid said:
i do have the MAGLDR version !
its just that the ROMS get stuck at the GO GO GO screen
and Bootlaoder wont load !
Click to expand...
Click to collapse
There are many possibilities on this case : Check your ROM and ensure matching with yur CWR Partition lay out, i.e some rom with 150 MB partition lay out, need 158 MB partition lay out
For your phone can not go into bootloader, its clueless for me. Wether the hardware failure or bootloader corrupts.
Please also check hold vol Up and Down + Power Button to reach DEFAULT FACTORY RESET MODE, also check the red button inside the phone : open battery cover there is reset small red button. Just push (with pen/pencil) and what happening
cheers up

Boot freeze

I've tried 3 different roms:
http://forum.xda-developers.com/showthread.php?t=926507
http://forum.xda-developers.com/showthread.php?t=1010498
http://forum.xda-developers.com/showthread.php?t=1010498
I have done everything as described in the instructions. Every time the bootscreen freeze. Coredroid was in boot loop. I have waited up to 1 hour and nothing happens. What is wrong?

I have exactly the same problem.. Tried three different ROMs with three different Radio's.

Partition layout?

Marvlesz said:
Partition layout?
Click to expand...
Click to collapse
No idea tbh, not experienced with NAND on HD2

henninghh990 said:
No idea tbh, not experienced with NAND on HD2
Click to expand...
Click to collapse
I've tried formating it with both 200 and 350MB as system partition.

sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?

JimWest7997 said:
sorry if this is a stupid question, but are you sure you've rooted it correctly?
I remeber having the same bootloop issue, when i went through the steps once again it worked..i think i just had missed something little...
are you using clk or magldr?
Click to expand...
Click to collapse
I did the following:
Installed HSPL 2.08
Installed MAGLDR
Use the DAF.exe with MAGLDR on the phone
Then I went to AD Recovery and wipe full data and Dalvik
Then I installed ROM via SD card.

I did the following:
Ran task29.exe
Installed Radio Leo 2.15.50.14
Installed MAGLDR
DAF.exe
Then I installed ROM via SD card in CWM.

Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!

JimWest7997 said:
Im sorry but it sounds right, what you did. all i can advice you to try ist start ALL over, first by rooting (http://forum.xda-developers.com/showthread.php?t=833953)
and then just follow the instructions given on the coredroid download, they are very detailed and unless you miss a step by accident (which was what i did) it should work.
and dont forget to give the first boot some time, it may take up to 15 minutes (sometimes even longer) but dont worry its just the first one!
good luck, and if you try please post the results, hd2 has left me down woth a few rooms a couple of times but in the end it always worked, even if it took many reflashes!!
Click to expand...
Click to collapse
That link, it links to an app. How am I going to install the app when I cant boot Android?

I have tried task29 and hard reset without any luck.

Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium

z3nful said:
Flash stock WM 6.5, then try again
Sent from my HD2 using xda premium
Click to expand...
Click to collapse
tried it twice...

what's the cwm log say? From advanced options you can have it put recovery.log on your sdcard, or you can use adb when in cwm to check it.
Sent from my HD2 using xda premium

this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any chance did u do this?

gdsbalaji said:
this might happen if you try to extract the rom and repackage in windows os...especially the kernel...
by any change did u do this?
Click to expand...
Click to collapse
did not repackage the rom.

May be bad blocks in memory....install rom thru cmr....Goto adv select report...mount SD...open the report file in notepad....u shouldn't see more than one bad block...else there is problem
Sent from my HTC HD2 using XDA App

freeze after data recovery using clockworkmode
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.

dotro said:
I have a freeze problem with my wildfire, a little help would be appreciated.
I installed cyanogenmod 7 and everything was working fine untill I restord all data (for cotacts and apps) using clockworkmode. After data recovery the phone freezes on boot.
Can someone tell me if I did something wrong or a method to get pass the freeze?.
I downgraded back to stock ROM but I really want to use Cyanogenmod.
Click to expand...
Click to collapse
you are aware this is the HD2 thread not the wildfire thread?
please check before posting in future

[Q] Having problems installing ClockworkMod Recovery 3.2.0.0

I hope someone can please help me with my dilemma!!!
I was having problems with my phone constantly rebooting, so I decided to start from scratch (not sure if that was a good idea).
I wiped my sd card and used HD2 Android NAND Toolkit to Wipe (Task 29) my phone. I then successfully installed HSPL 2.08, LEO_RADIO_2.15.50.14 & MAGLDR v1.13. I am trying to install ClockworkMod Recovery 3.2.0.0 but with no success. Can someone please walk me through how I can get CWM on my phone so I can install a custom Android ROM. Thank you in advance for all your help.

WuLfDawg said:
I hope someone can please help me with my dilemma!!!
I was having problems with my phone constantly rebooting, so I decided to start from scratch (not sure if that was a good idea).
I wiped my sd card and used HD2 Android NAND Toolkit to Wipe (Task 29) my phone. I then successfully installed HSPL 2.08, LEO_RADIO_2.15.50.14 & MAGLDR v1.13. I am trying to install ClockworkMod Recovery 3.2.0.0 but with no success. Can someone please walk me through how I can get CWM on my phone so I can install a custom Android ROM. Thank you in advance for all your help.
Click to expand...
Click to collapse
easy. put ur phone in magdlr mode, download a recovery required by ur rom, and using usb flasher flash your recovery

Thank you very much, but...
tecle2595 said:
easy. put ur phone in magdlr mode, download a recovery required by ur rom, and using usb flasher flash your recovery
Click to expand...
Click to collapse
Thank you very much for the reply. I really appreciate it. But, I am a super noob... I need my hand held a little more through this process. I am trying to put NexusHD2_IceCreamSandwich_Beta6.zip on my phone (unless you can recommend a better ROM, especially w/3D UI). I thought CWM was the recovery. Also, I noticed when I start MAGLDR v1.13, before it gets to the main menu, it says ss: kernel open failed. Is that important?
I know it's tedious and annoying, but I need step by step instructions on how to resolve this.
THANK YOU, THANK YOU, THANK YOU!!!!! And have a wonderful holiday season!!!

I would probably use a rom that is not in beta as there is still some work to be done to it. I think the camera is still in the process of being fixed. If you want a rom that is running well for daily use I would try a gingerbread rom. The ics rom is a great rom and once everything is working it will be great for daily use.
Now the error is most likely because it is looking for the boot section of your android which you need to install. Make sure the rom you want is on sdcard and then install it via CWM which is accessed through magldr. In magldr menu go to ad recovery then to install zip from sdcard then choose zip and finally go down to the rom on your sd card and select it.
Oh to move up and down on the menu use the volume buttons and to select the option press the call button
WuLfDawg said:
Thank you very much for the reply. I really appreciate it. But, I am a super noob... I need my hand held a little more through this process. I am trying to put NexusHD2_IceCreamSandwich_Beta6.zip on my phone (unless you can recommend a better ROM, especially w/3D UI). I thought CWM was the recovery. Also, I noticed when I start MAGLDR v1.13, before it gets to the main menu, it says ss: kernel open failed. Is that important?
I know it's tedious and annoying, but I need step by step instructions on how to resolve this.
THANK YOU, THANK YOU, THANK YOU!!!!! And have a wonderful holiday season!!!
Click to expand...
Click to collapse

Nemesis1278 said:
I would probably use a rom that is not in beta as there is still some work to be done to it. I think the camera is still in the process of being fixed. If you want a rom that is running well for daily use I would try a gingerbread rom. The ics rom is a great rom and once everything is working it will be great for daily use.
Now the error is most likely because it is looking for the boot section of your android which you need to install. Make sure the rom you want is on sdcard and then install it via CWM which is accessed through magldr. In magldr menu go to ad recovery then to install zip from sdcard then choose zip and finally go down to the rom on your sd card and select it.
Oh to move up and down on the menu use the volume buttons and to select the option press the call button
Click to expand...
Click to collapse
Thank you very much, my friend. I was using NexusHD2 Gingerbread v2.3.5 previously and it worked fine until it kept rebooting. I'll give this method a try and see what happens. Have a wonderful holiday season and thanks again.

You're welcome and tytung makes good roms and when he finishes them they run really well.

Check here http://forum.xda-developers.com/showthread.php?t=1395098
Or here http://forum.xda-developers.com/showthread.php?t=1394327
How about here http://forum.xda-developers.com/showthread.php?t=1392632...

higg01 said:
Check here http://forum.xda-developers.com/showthread.php?t=1395098
Or here http://forum.xda-developers.com/showthread.php?t=1394327
How about here http://forum.xda-developers.com/showthread.php?t=1392632...
Click to expand...
Click to collapse
I'm sure at one time in your life, you had trouble with something, couldn't figure it out and needed help. Being a sarcastic douche doesn't help my situation...

[Q] Any way to resize the system part, without a computer?

Hi,
I'm in the middle of the jungle literally and i only have my phone with me... I'm trying to install the evohd2 ics rom but my sys part is only 160mb...is their any way I can resize it without a computer....?
Thx

If you have cLK boot loader, you can.
Just wipe all via recovery.
Then boot to cLK by long pressing back button and power. You will find the option there.
BTW, this should have been posted in the General or Q&A section, not development.
Mods please relocate this thread.
Sent with love from me to you via HTC HD2

Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?

Thread moved to proper forum.
Sent from my GT-I9300 using xda premium

zozew said:
Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?
Click to expand...
Click to collapse
Yes, why do you prefer MAGLDR if you run android?

It's not that I prefer it its just that's what's on the phone.... Don't I need a computer to change to clk? Or am I totally off track?
My situation is this I have my tmob HTC hd2 with magldr, i'm in the middle of nowhere with just my phone I'm not programming noob but, I haven't been flashing my hd2 more than once... Actually twice i tried a pacman 4.1.2 rom as it only needed 145mb sys part, I'm actually running it now.... But it's lagging quite a bit no disrespect intended.... Probably my installation at fault... So I read that the evohd2 4.0.4 rom was supposed to be quite fast... But it needs at least 200mb syspart...
So if you say I can use clk to repartition, how can I get it on my phone without a computer just give me a link if you know where I should start looking.... I've Google and searched.... But all leads to the hd2 toolkit which I sadly can't use

there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.

You mean flash it like flashing a new power up splash screen? Volume down plus power button?

kslakhani said:
there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.
Click to expand...
Click to collapse
I did flash it and it took a few reboots because it got stuck on the recovery team splash screen...but finally it booted the touch recovery: ) i repartotioned the sys part and reflashed the pacman jelly bean rom just to try amd run it clean...and its not bad: )ill try it for a day now and see
Thx a bunch

sSo thought I'd just update...
I managed to wipe and clean all partitions and install the NexusHD2 ics rom and it's running like the wind only problem is that takes up to ten times to reboot to get it to load the touch recovery... So I got a little scared I'd bricked it.
. But it's ok now thanks a bunch

great u managed it in the middle of jungle right
actually clk is great tool. the only prob with clk is it doesnt support rmnet network it supports only ppp
hope soon devs gonna fix this
sorry i was away so late response
oh yes forgot to tell u clk recovery takes a while but let it be on very first boot its ok approx 10 mins(yeah i kno its too much)