Database Users

[Q] Recovery MOD 1.12 400MB stuck on GO GO GO

Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
What build were you trying?
Sent from my HD2 Droid HD using XDA App

Just redo everything.

hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!

Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App

Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App

walidhazem said:
hav a quick question...i flashed wp7 with magldr 1.12 and on my 16gb sd i hav android, they both work but the wp7 has 7gb memory, while android says unavailable for memory available and total is 0.00mb. cant download any apps from marketplace. pls help!!
Click to expand...
Click to collapse
Format that card in android, or wm

werngrort said:
Agree, redo everything and it should work, failing that flash a official rom and then try again.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?

brunteboy said:
Well im kinda new to this and im stuck at the same place, how do I redo all when I get at the same startup mode when I restart my phone?
Click to expand...
Click to collapse
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works

silverwind said:
What they mean with redo is to start from the very beginning
1. Reformatted SD card
2. Go into bootloader and make sure you have SPL 2.08 HSPL
3. Task 29
4. Flash Radio 2.15.xx
5. Flash MAGLDR version 1.13 (the latest one)
6. Flash WP7 or ANDROID (as you like.
Reboot and see if that works
Click to expand...
Click to collapse
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.

akapaul26 said:
Yeah what they said but after you flash MAGLDR you need to flash a partition before flashing a ROM.
Click to expand...
Click to collapse
No need if you flash via DAF method (just select menu no. 5 USB Flasher while the phone plugged to PC) and run the DAF.exe (Android rom) from your PC.
You will only have to flash RECOVERY partition if you want to flash via ZIP/CWM mode

jalshah05 said:
Trust me guys I tried everything. I did the task 29 too. But No help. And the android Tom does not even matter. As I am not even able to install the Zip file. I am just not able get clockwork mod to work for me. Just gets stuck at gogogo.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
so you install magldr then you installed CWM and you held down the right button whilst it booted, did it go into the menu?
sounds like you havent installed a rom yet

jalshah05 said:
Hey Guys,
Can someone tell me why my phone gets stuck on GO GO GO after I install Recovery MOD 1.12 400MB partition. I have TMOUS HD2, HSPL3, 2.15.50.14 radio, MAGLDR 1.12.
Help would be appreciated.
Thanks...
Click to expand...
Click to collapse
Need to Instal HSPL 2.08 from HSPL installation HSPL upper than that wont work....double check it.....

Stuck on "GO GO GO!" in AD Recovery.

I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.

itzstevo said:
I was able to successfully install CWM on one HD2 and is now running Android on it.
Well that HD2 the touch screen no longer work. So i purchase another HD2 and attempt to do the same, but once I install Recovery 150, I go to AD Recovery and I get stuck on "GO GO GO!" CWM won't load. Can anyone give me suggestion to what might be the problem.
What I have tried so far.
1. I reload HSPL3 to 2.08.HSPL
2. Flash Task29
3. Flash Radio 2.25.50.14
4. Flash MAGLDR 1.13
5. Flash Recovery 150MB
then when I boot in to AD Recovery I get stuck on GO GO GO!.
When I Flash 250 or 400 I get FATAL in red.
SO i attempt to flash the OEM T-MO rom it hang at 8% and crash. Don't know what I'm doing wrong. I can get into the bootloader fine.
Click to expand...
Click to collapse
first off once you do HSPL you don't ever need to do it again, and the radio you flashed was 2.15.50.14? once you flash the radio you don't need to reflash it again, unless changing to a different one.
Now I would suggest to start back at task29,
then MGLDR 1.13,
redownload the partition in case of any corruption,
are you using win xp or 7?
if on win 7 right click on the daf and run as admin.
I know there's not much difference from what you said but maybe you have a corrupted download and it's messing things up.

Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users

I'm using windows vista & i tried the HD2 NAND toolkit still the same result. :/

so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
Then you have a hardware issue with the phone itself!
Sent from my HyperDroidCM7 HD2

sebasmiles said:
Try using the toolkit, it does a really good job:
[2 Jun 11][v3.9] HD2 NAND Toolkit - All in one Toolkit for HD2 NAND Users
Click to expand...
Click to collapse
Thanx a lot, I solved problem "stuck on GO GO GO!" with HD2 NAND Toolkit!

I often encounter this problem,too

I really dont know sorry for u

hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee

itzstevo said:
so i gave the freezer cooling theory a try and it works. Now I got another problem on hand i can only use the phone no more than 20-30 min at a time before it locks up.
Click to expand...
Click to collapse
i'm having exactly the same problem, i'm trying to install android because if i install the stock rom it stucks at the htc logo an when i install android it works for a few minutes but then it freezes
i've searched on google for it and they say that it can be a overheating problem

It was a touchscreen issue when i had this error. I had replaced the digitizer but the ribbon came loose during repair. If, when you boot to the tricolor screen (hold volume down + power), you dont see cotulla hspl 0x40 or 0x50 you have a touch screen problem.
Sent from my GT-N8013 using Tapatalk 2

stuck on go go go!
tanny1 said:
hi there guys i need help i have TyphooN CyanogenMod 7.2 RC3 v3.8.5[2.3.7][A2SD+][tytung r1 nand rom installed,on htc hd2 working perfect but recently i wanted to access ad recovery in magldr it loads 123456 go go go,and then freezes ,i can not get in to clockwork recovery but i did not have that problem before can some one help please,thanks and i do not want to loose the nand rom ,im a newbiee
Click to expand...
Click to collapse
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.

jimani said:
seems like no body found a good way to resolve this issue. because I'm still struggling with it.
Please help.
Click to expand...
Click to collapse
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.

Robbie P said:
Hi jimani, welcome to the forum. Please provide more information about your problem, which recovery? what size recovery partition? What have you tried? Hspl?
The more information you can give, the more likely someone will know what your problem is.
Click to expand...
Click to collapse
Hi Robbie,
Actually I tried every thing:
At the first time it was a touchscreen issue, I replaced it and try to reinstall the android rom; i used the toolkit 4.3 to flash.
1.HSPL3
2.WIPE(Task 29)
3.Radio-Leo-2.15.50.14
3.MAGLDR 1.13
4.Repartition 280MB for system, 5 for cash.
But when I tried to go in AD RECOVEY, my phone stuck 1234 GO,GO,GO.
I perform this steps on two htc hd2( one is T-Mobile) but no success.
Please help.
Justin.

did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?

Robbie P said:
did you install hspl 2.08 using hspl3?
Which recovery have you installed and how did you install it?
Have you tried an sd recovery, booted from ad sd dir?
Click to expand...
Click to collapse
Hi Robbie,
Yes I installed hspl 2.08 using hspl3.
After DFT MAGLDR Boot loader is loaded I install the partition after that I go in ad recovery to load the Clockwork Mod Recovery then... stuck!
When I tried to boot from the sd card it's say : SD open kernel failed .
I don't know may be I'm mixing things. can you provide me a clear step by step doc?
Thanks in advance.
Justin.

Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.

Robbie P said:
Am at work now, have you tried using hd2 toolkit to install your nand recovery?
Else to use an SD recovery, you have to specify the folder that the zImage and initrd.gz files are in, using magldr ad SD dir, then boot from ad SD.
Click to expand...
Click to collapse
Yes I tried many ways: hd toolkit, tools separately,...
also I tried to specify the folder that the zImage and initrd.gz files are in,but still giving that horrible message:SD open kernel failed

Flashed a rom, frozen screen! Can anyone help??

Hi all..I just flashed the rom below using CWM and it told me everything was successful, and when I reboot, I have some small white text on the screen and it just stops and freezes. a few lines of text and the last 2 lines are:
[330] udc.start()
[330] -- suspend --
and it just hangs there..Ive pulled the battery, etc..I cant do ANYTHING..I need to flash the other rom back to it, but can I reverse this at all?? Any help is MUCH appreciated!
the rom i flashed:
http://forum.xda-developers.com/showthread.php?t=1209814&highlight=arkat
Thanks SOOOO much in advance...hope I dont have a brick!!

from what I saw, is the first rom that the User does.
"MY 1st Rom here:
[11.AUG.11][MAGLDR] Arkat-DoubleSense v1.2 (GB with sense 2.1) [Rafpigna 2.0 OC GB]
http://forum.xda-developers.com/show....php?t=1209814"
May have problems that have not yet been identified.
The problem is only with this rom or with all?
Try to install other roms, if only this rom has problems I recommend that you talk with arkatis....
I hope I have helped...

Check back to the rom page and see if you did everything right. Are you using clk or magldr?
Sent from my HD2 using XDA App

pianoman102 said:
Check back to the rom page and see if you did everything right. Are you using clk or magldr?
Sent from my HD2 using XDA App
Click to expand...
Click to collapse
Im using clockworkmod...i save the .zip file to the sd, reboot the phone in "recovery" , and then "install .zip from sd card", scroll to the .zip file, and it does its thing..worked fine first couple roms i did, but this one is hung there for some reason..
not sure how to access the phone with it just hanging there to delete the bad rom off there??
Or some kind of hard reset to bring it back to life so i can fix it???

cadorette said:
Im using clockworkmod...i save the .zip file to the sd, reboot the phone in "recovery" , and then "install .zip from sd card", scroll to the .zip file, and it does its thing..worked fine first couple roms i did, but this one is hung there for some reason..
not sure how to access the phone with it just hanging there to delete the bad rom off there??
Or some kind of hard reset to bring it back to life so i can fix it???
Click to expand...
Click to collapse
Update: now it is just sitting there with the
[330] udc_start
as the last line and nothing after...

Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.

Egrier said:
Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.
Click to expand...
Click to collapse
yes i can get to bootloader...ill try that now and get right back..thanks for the help...brb

Egrier said:
Can you get to the bootloader screen? ie. the multi-colored screen. If so, try to run Task 29 on it to wipe your phone. Then reload MAGLDR or CLK which ever you prefer. Then try the rom again.
Click to expand...
Click to collapse
ok i can get to bootloader mode by pressing vol down and power...but it just tells me the spl version and stuff and i cant select anything or access any type of menu, etc..

Ok, as you are in the bootloader mode. Download this tool: http://forum.xda-developers.com/showthread.php?t=1090783
And run Task29. This will delete everything but your radio on the phone so you will have to reflash Magldr. You can use this tool to flash magldr also. If you get that far then partition the phone according to the rom instructions. Then try to flash the rom again.

Egrier said:
Ok, as you are in the bootloader mode. Download this tool: http://forum.xda-developers.com/showthread.php?t=1090783
And run Task29. This will delete everything but your radio on the phone so you will have to reflash Magldr. You can use this tool to flash magldr also. If you get that far then partition the phone according to the rom instructions. Then try to flash the rom again.
Click to expand...
Click to collapse
gotcha..im on it...thanks so much for helping and tolerating my newbness haha

OK so far so good!! i was able to run task 29, and flash magdlr 1.13 via hd2 toolkit..searching now but can you direct me to where/how to install a rom using this? im assuming the usb flasher method? thats the screen i have right now!!

cadorette said:
gotcha..im on it...thanks so much for helping and tolerating my newbness haha
Click to expand...
Click to collapse
Egrier I want to thank you soooo much...not really a noob but kind of nooby in the whole rom flashing thing..you pointed me in the right direction and I was able to figure the rest out myself...and im back!!! you saved my phone, thank you so much!!! much appreciation to all that helped me...thanks again!!!

Glad to have helped you. Sorry it took me so long to reply. I was at music practice and didn't get
back home til late. Which ROM did you go with?

[Q] Any way to resize the system part, without a computer?

Hi,
I'm in the middle of the jungle literally and i only have my phone with me... I'm trying to install the evohd2 ics rom but my sys part is only 160mb...is their any way I can resize it without a computer....?
Thx

If you have cLK boot loader, you can.
Just wipe all via recovery.
Then boot to cLK by long pressing back button and power. You will find the option there.
BTW, this should have been posted in the General or Q&A section, not development.
Mods please relocate this thread.
Sent with love from me to you via HTC HD2

Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?

Thread moved to proper forum.
Sent from my GT-I9300 using xda premium

zozew said:
Sorry for posting in the wrong forum I don't have clk I have magldr.... I'm I out of luck?
Click to expand...
Click to collapse
Yes, why do you prefer MAGLDR if you run android?

It's not that I prefer it its just that's what's on the phone.... Don't I need a computer to change to clk? Or am I totally off track?
My situation is this I have my tmob HTC hd2 with magldr, i'm in the middle of nowhere with just my phone I'm not programming noob but, I haven't been flashing my hd2 more than once... Actually twice i tried a pacman 4.1.2 rom as it only needed 145mb sys part, I'm actually running it now.... But it's lagging quite a bit no disrespect intended.... Probably my installation at fault... So I read that the evohd2 4.0.4 rom was supposed to be quite fast... But it needs at least 200mb syspart...
So if you say I can use clk to repartition, how can I get it on my phone without a computer just give me a link if you know where I should start looking.... I've Google and searched.... But all leads to the hd2 toolkit which I sadly can't use

there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.

You mean flash it like flashing a new power up splash screen? Volume down plus power button?

kslakhani said:
there u r mate
the attached file is clk with touch recovery included.
rename the file with leoimg.nbh then put it on root of yr sd card and flash it
you dont need a pc to make repartition yr nand u can use it with inbuilt repartition option with this great tool
credit goes to the kokotas and their team.
Click to expand...
Click to collapse
I did flash it and it took a few reboots because it got stuck on the recovery team splash screen...but finally it booted the touch recovery: ) i repartotioned the sys part and reflashed the pacman jelly bean rom just to try amd run it clean...and its not bad: )ill try it for a day now and see
Thx a bunch

sSo thought I'd just update...
I managed to wipe and clean all partitions and install the NexusHD2 ics rom and it's running like the wind only problem is that takes up to ten times to reboot to get it to load the touch recovery... So I got a little scared I'd bricked it.
. But it's ok now thanks a bunch

great u managed it in the middle of jungle right
actually clk is great tool. the only prob with clk is it doesnt support rmnet network it supports only ppp
hope soon devs gonna fix this
sorry i was away so late response
oh yes forgot to tell u clk recovery takes a while but let it be on very first boot its ok approx 10 mins(yeah i kno its too much)

Problems with loading Clockwork mod and roms

Hello xda members i want to install an android rom on my hd2, as after i got the screen fixed it lost the rom I had installed and yhen i could not install new ones.. So followed instructions below and got stuck on the second paragraph
Connect the device to the USB port
Put the device into factory flash mode by booting it while pressing "volume down"
Install HSPL using the "Install HSPL" function inside HD2ToolKit - MAGLDR: Android / WP7 supports 2.08 ONLY!
Put the device into factory flash mode by booting it while pressing "volume down"
Do "Task29" (aka Complete Wipe) using the "Wipe (Task29)" function inside HD2ToolKit
Put the device into factory flash mode by booting it while pressing "volume down"
Install Latest Radio Firmware using the "Install Custom NBH/NB RUU" function inside HD2ToolKit - HD2 Radios
Put the device into factory flash mode by booting it while pressing "volume down"
Install Latest MAGLDR using the "Install MAGLDR" function inside HD2ToolKit
Boot into MAGLDR recovery menu by pressing the "shutdown/hangup" button while booting up
Choose "USB Flasher"
Click to expand...
Click to collapse
The above all appeared to work and go well
Flash the Latest CWR (Clockwork Recovery) with the appropriate partition sizes by using the "Repartition" button inside the HD2ToolKit: System: 200MB | Cache: 5MB
Boot into MAGLDR recovery menu by pressing the "shutdown/hangup" button while booting up
Insert MicroSD card with the ROM ZIP
Choose "AD Recovery"
Flash ROM ZIP
Reboot
Click to expand...
Click to collapse
Okay the problem is CWR (i downloaded the 150mb version as thought that will work with the rom) It will not install properly and I can not load the CWR menu up. 8. 'AD recovery' states in red "No sources".
Another error message I got is when I first start my phone I get this "Nand Kernal open failed"
Please help me I need to get this fixed as the phone is a present for someone.

Did you use the repartition option in the toolkit or you downloaded a separate package?
Use the option in the tool, and make sure you select the sizes according to the ROM you want to install.
Of course the device would say nand kernel failure, there is nothing in the device. After installing the recovery you need to flash a ROM, obviously.
Sent from my NexusHD2 using xda app-developers app

Marvlesz said:
Did you use the repartition option in the toolkit or you downloaded a separate package?
Use the option in the tool, and make sure you select the sizes according to the ROM you want to install.
Of course the device would say nand kernel failure, there is nothing in the device. After installing the recovery you need to flash a ROM, obviously.
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
Thanks for getting back to me,
This is the rom i tried to install but any rom will be fine to be honest!
[17.DEC.2012║ROM] myMIUI 15 B5 [MAGLDR/CLK║Dorimanx║GB║myMIUI IDE©║zipA║MultiLang]
So i did a wipe 29 again, the radio is Radio-Leo-2.15.50.14 and i googled it to download,
just to make sure the repartition was done from the HD2 tool, all stages complete and repartitioned to rom specs 200mb and 5mb cache, so repartition from HD2 tool installs cwmod then?
8. AD Recovery - still stuck saying gogogo..

Which radio do you have installed?

Marvlesz said:
Which radio do you have installed?
Click to expand...
Click to collapse
Radio-Leo-2.15.50.14 I dont know if your supposed to see the radio show up on one of the screens in magldr or hspl? but i've not seen anything that shows the radio loaded other than "success" after the initial installation.
It was installed through HD2 toolkit after extracting the two files to desktop.
Also I downloaded the radio from file sharing website after I googled it as the links on xda were no longer working.
thanks,

Well, I am sorry but I am no expert in MAGLDR. All I know is that the infamous Stuck @ GOx3 had been fixed in MAGLDR v1.13.
If you already have v1.13, I am at the limit of my knowledge, sorry.
You could try to re-install though.

Marvlesz said:
Well, I am sorry but I am no expert in MAGLDR. All I know is that the infamous Stuck @ GOx3 had been fixed in MAGLDR v1.13.
If you already have v1.13, I am at the limit of my knowledge, sorry.
You could try to re-install though.
Click to expand...
Click to collapse
Okay mate thanks for your help anyway it was nice of you to take the time to try to help me .
I hope someone else on these forums will help me, I guess i can still go back to the old windows 6.5. I read someone else had similar problem and ended up going back to 6.5. It's a shame because i was giving the phone as a present and wanted it in good working order with android or at least the new windows mobile system..
Maybe the old methods of installing android on the SD card without magldr would work, I would need to find the posts with guides for that as it was such a long time ago when I went through those instructions I really cant remember.

repartition again, if it not work, try this way
gdsbalaji said:
do this...depending on the recommended recovery size (typically 5-150-5 for non sense versions) download a recovery from here ..then restart you phone...go into magldr...go to flasher...once the usb is linked to pc run daf.exe from the recovery (extracted folder)...u will then have recovery installed
Click to expand...
Click to collapse
that's all I can help

You know, you could hit the thanks button for Marvlesz
Anyway, I can't see where you're going wrong here. All your steps are (as far as I can see) perfectly fine. Just to double check, you have:
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.13
CWM (from the Toolkit)
right? If so, everything should theoretically work correctly. Try downloading an older CWM version such as the one from the guide in my sig and flashing that instead.

Thankyou tried that tin1203 and I found the 250mb and 400mb (old version) but couldn't download the 150mb version..Links dead
Still stuck on 8.AD recovery.
However instead of being stuck on gogogo, AD recovery simply stated "No Boot sources"
Anything else I can try? Or know a guide to at least get the phone back to working in some form? Cheers

Nigeldg said:
You know, you could hit the thanks button for Marvlesz
Anyway, I can't see where you're going wrong here. All your steps are (as far as I can see) perfectly fine. Just to double check, you have:
HSPL 2.08
Radio 2.15.50.14
MAGLDR 1.13
CWM (from the Toolkit)
right? If so, everything should theoretically work correctly. Try downloading an older CWM version such as the one from the guide in my sig and flashing that instead.
Click to expand...
Click to collapse
Yep HSPL 2.08 installed
Now how would i check the Radio? Install it again and receive confirmation once installed? Or is there another way to check?
MAGLDR 1.13 is installed
CWM from the toolkit will not load up - when installing it everything appears to work and install fine ( no errors etc) However 8. Ad recovery will not load up.
Anything else i can do to at least get the phone operational.

To check the radio, turn your phone off then on again. While it's booting up (on the first splashscreen) three lines of text will appear. The top one is something like R: 2.15.50.14 (or whatever radio you have, obviously) so try checking that line and making sure that it's a .50 radio. If it is, then everything worked fine when you flashed the radio. Also try the CWM version from the guide in my sig, it's supposed to be one of the most stable versions I think.

Hey i think i know what your problem is and since it's a present i hope that will work...there are two types of recoveries...the ones flashed on nand that can be booted from 8.ad recovery...and the ones flashed on the sd that can be booted from the 3rd option of mgldr..i think is called 3.ad sd..i really hope this will help!

eliaskammas said:
Hey i think i know what your problem is and since it's a present i hope that will work...there are two types of recoveries...the ones flashed on nand that can be booted from 8.ad recovery...and the ones flashed on the sd that can be booted from the 3rd option of mgldr..i think is called 3.ad sd..i really hope this will help!
Click to expand...
Click to collapse
Thanks for the help guys, after my previous post I decided to try installing windows 7 and all went well in terms of flashing the rom however although it appears to have loaded I have no touch screen, its completely not working
This could be due to windows 7 software or when it got fixed as I not used the touch screen since..

Oyeah thanks for helping, just need to get someone to fix the touch screen i guess.

It would be better for you if you install cwr from toolkit, just select the partition size(magldr repartition) for eg. 150 like you want and you'll get cwr v5.0.2.6.. Those recoveries that you're downloading from guide suck, didn't work for me too(ok, they worked but I couldn't flash anything even if I downloaded the 400 one).. Recommended.
EDIT: Sorry, haven't seen the second page of the thread where you already mentioned that cwr from toolkit won't boot.

Shaumaaa said:
It would be better for you if you install cwr from toolkit, just select the partition size(magldr repartition) for eg. 150 like you want and you'll get cwr v5.0.2.6.. Those recoveries that you're downloading from guide suck, didn't work for me too(ok, they worked but I couldn't flash anything even if I downloaded the 400 one).. Recommended.
EDIT: Sorry, haven't seen the second page of the thread where you already mentioned that cwr from toolkit won't boot.
Click to expand...
Click to collapse
Yeah thanks I really tried a lot of stuff and I know the basics been flashing since HD2 came out, I ended up flashing new windows and it actually loaded up but then guess what? The touch screen is not responding, ill be taking it back to where I got that fixed to complain.