Which Build versions was the NoDo update acutally introduced?
7004?
h8uman said:
Which Build versions was the NoDo update acutally introduced?
7004?
Click to expand...
Click to collapse
7390
7004 is the 1st official release in October of WP7 OS.
7008 is the "February prequisite"
7390 is the first NoDo update
7392 is just a certificate update, still "Nodo" though
7392 is now the "default" NoDo update WP7 phones get, updating from 7008.
Thanks!
Thank you very much!
On my Focus v1.3 I still don't get 7392. I am at 7390.
andreiuc said:
On my Focus v1.3 I still don't get 7392. I am at 7390.
Click to expand...
Click to collapse
That's because AT&T didn't release the 7392 update for v1.3. You need to do the unbrand hack, but you will get the general (MS) version of NoDo instead of the AT&T one. Two minor differences in it.
Refer to my post here.
Related
Dear all,
Last week I bought my Omnia7 and I'm happy with the phone and WP7. I upgraded it yesterday to Mango RTM and everything went well. Now the only wish I have is a Dutch language on the Omnia. Is there already a solution for it?
Thanks in advance!
jeroen
Only roll back to NoDo and add dutch lagnuage into registry and it will download upon updating to Mango beta.
Only roll back to NoDo and add dutch lagnuage into registry and it will download upon updating to Mango beta.
Click to expand...
Click to collapse
Can you explain how I can do this? Just updated to the RTM Mango via Zune (released today) and still no Dutch language support, only the languages WP7 supported from day 1.
How do i simply 'roll back' to NoDo and how do I change a registry on my phone?
Thanks in advance.
To roll back to Nodo download the stock firmware from samfirmware.com. After this apply updates 7008 and 7392 by using Zune. When on 7392 you mast add the language to the registry and after this you can update to mango rtm again.
http://download.windowsupdate.com/m..._4e1f62edd8e6fe93d4daa106f915f4b9eba38df1.cab
(This is the official post-Mango OEM update cab for unbranded HTC Schubert)
Do you have the link for the unbranded HTC Spark (EU), too?
gReeTs
cYBERdEL
bleh815 said:
http://download.windowsupdate.com/m..._4e1f62edd8e6fe93d4daa106f915f4b9eba38df1.cab
(This is the official post-Mango OEM update cab for unbranded HTC Schubert)
Click to expand...
Click to collapse
Is this for updating the firmware on the HD7 to utilise compass etc in Mango apps?
I have an O2 branded HD7 that is updated to Mango RTM / final using ansar's techniques, but I didn't get the firmware update along the way. How would I go about installing this, will it work for an O2 branded device?
wheresmybeaver said:
Is this for updating the firmware on the HD7 to utilise compass etc in Mango apps?
I have an O2 branded HD7 that is updated to Mango RTM / final using ansar's techniques, but I didn't get the firmware update along the way. How would I go about installing this, will it work for an O2 branded device?
Click to expand...
Click to collapse
If u did like what ansar did, u just have 7720 ISV beta final build... U have to use Mangoforall2.0 or provision... To get update to 7403 ISV then 7220 ISV... But then, u have to run Connection setup quickly (if u want to keep jb with your CustClear.provxml in Window of your HD7)... Then will have a quick Update, i couldn't see update name, just the something like "clean"...after that, about 1', will have HTC update and and bravo U have got 7720 Official I try by ansar way about 5 time( and never have official 7720... Then, i use Mangoforall2.0, run update.bat and now, I have 7720 official with still jailbreaking
luv116 can u use native apps after update "HTC update for windows phone"(an update after "clean...." update.)
parnunu said:
luv116 can u use native apps after update "HTC update for windows phone"(an update after "clean...." update.)
Click to expand...
Click to collapse
Hi, I adding the correct provisioning (back to retail) on my phone (using ansars tools) and this HTC Update appeared for me in Zune without any trickery. Problem solved! And it retained Chevron unlock afterwards.
Watch out though for an update in marketplace for Connection Setup as this may overwrite the chevron provisioning on your phone, you'll need to apply chevron provisioning again in case of future relock.
Fantastic!
I too need the post-OEM update for my Trophy. Should be WWE for me.
No dice on the timing hack for me. sigh...
TIA!
Hi guys. Anyone care to share on how to use this?
Sent from my HD7 T9292 using XDA Windows Phone 7 App
ok, found it here.
http://forum.xda-developers.com/showthread.php?t=1283347
HD2?
Does anyone know if this OEM update will be safe and successful to do on a HD2 running mango RTM?
Thanks.
I tried to deploy the update with XBoxMod Update Cab Sender. CAB was sent to device but the upgrade failed.
I'm on RTM Mango with PhoneID SEA. I bought it in Singapore.
bleh815 said:
http://download.windowsupdate.com/m..._4e1f62edd8e6fe93d4daa106f915f4b9eba38df1.cab
(This is the official post-Mango OEM update cab for unbranded HTC Schubert)
Click to expand...
Click to collapse
I tried to install that on my T-Mobile HD2 wh Zune-installed Mango and it errored out. The update failed.
[email protected] said:
I tried to deploy the update with XBoxMod Update Cab Sender. CAB was sent to device but the upgrade failed.
I'm on RTM Mango with PhoneID SEA. I bought it in Singapore.
Click to expand...
Click to collapse
This is for Europe .
For sea the same update is 2250.21.50001.728
The upgrade failed because , the update is not compatible with yr region phone.
Unless u are running a custom euro based rom
errors with hd2
same problem here with hd2 running xbmod and mango 7740.
i am located in germany but cant send this to the device
My phone goes through the update installation and gives error at finish "not enough room on device". It was reset before update ??
Hi,
I recently put WP7 Mango on my HD2, so I have the 7720.68 installed.
I was connected to a WIFI spot, and my phone told me "there is an update available"...
I don't really understand, and as I am not able to sync it with Zune, I cannot try to update it. What would it be? A radio update? Something else?
My radio is 5.51T.09.29a_22.32.50.10U
Any idea??
jinge said:
Hi,
I recently put WP7 Mango on my HD2, so I have the 7720.68 installed.
I was connected to a WIFI spot, and my phone told me "there is an update available"...
I don't really understand, and as I am not able to sync it with Zune, I cannot try to update it. What would it be? A radio update? Something else?
My radio is 5.51T.09.29a_22.32.50.10U
Any idea??
Click to expand...
Click to collapse
If you haven't synched with zune (so installed via cabs) you are now on the RTM 7720 and are being offered the cleanup update, which will take you to official mango (same version number BTW).
Not much difference to be honest.
Enjoy
Thanks, I didn't know there was a cleaning update following the RTM.
Any idea how I can connect to zune? I tried many things, but it is not recognized...
I just updated my Jil Sander Phone to Mango 8107 using this guide (german language):
http://www.handy-faq.de/forum/windows_phone_7_forum/234220-windows_phone_7_update_build_8107_a.html
Works! :-}
Mango 8107 update
updated !!!
Glad I could help
I think you can update "Officially" now, the usual Zune way.
Did you get an update notice? As far as I know, only branded phones get the update. The Jil Sander is not branded.
ordas said:
Did you get an update notice? As far as I know, only branded phones get the update. The Jil Sander is not branded.
Click to expand...
Click to collapse
Oh yeah, I was talking about the branded O7.
I just wanted to help some fellow Jil Sander users.
When I tried to update on my Omnia 7, Zune came back with the error code, 80180008.
Anyone knows how to solve this?
I received notifications for the 8112 and then the 8773 updates. The firmware is KK2 (no change there).
If your phone is Interop unlocked this series of updates can be a bit devastating as 8773 seems to break Interop (unlock) and KK2 prevents unlocking. Leaves you in a sticky position. I had to send 8773 with the cab sender tool, relock, and then update to KK2 in Zune.
Hi, what operatoro code you have?
Thanks a lot
000-GB
Ok, I changed my mobile operator but It doesn't work
Try 000-88 as well. You may also want to try 000-UK.
The reason I say try a few is that my code has changed over time (oddly). It used to be 000-88 back in January but somewhere along the line it has become 000-GB, perhaps after the KK2 update I received after Tango?
MODeviceName= OMNIA7
MOName= (blank)
I'm updating manually... but thanks a lot
blueron said:
I'm updating manually... but thanks a lot
Click to expand...
Click to collapse
Odd...changing the code has worked for me in the past. Maybe that combined with wireless disconnect would do the trick.
Also works fine with T-Mobile Germany ROM. After flashing Samsung Omnia 7 Firmware XXJJ6 (T-Mobile CSC) and updating via ZUNE, I have now Tango and internet sharing. Don't know if T-Mobile UK gives internet sharing.
After all I have:
os version: 7.10.8773.98
firmware: 2424.11.9.4
radio: 2424.11.9.1
bootloader: 5.9.3.0
sebger said:
Don't know if T-Mobile UK gives internet sharing.
Click to expand...
Click to collapse
It does.