Database Users

[ROM]RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_ 22.24.50.09U, by ansar

Hi,
A New ROM for the Orange_UK operator:
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U_by_ansar
see also thread: Windows Phone 7 Branded ROMs for Mozart
Till next version enjoy!!!
Regards, ansar

Much appreciated Ansar.
Will no doubt prove usefull if I ever need to rollback.

Infuriated-Germ said:
Much appreciated Ansar.
Will no doubt prove usefull if I ever need to rollback.
Click to expand...
Click to collapse
Hi,
That's for sure.
But why do not try NoDo Europe 1.30 (I see 1.28 in avatar) ?
Regards, ansar

ansar.ath.gr said:
Hi,
That's for sure.
But why do not try NoDo Europe 1.30 (I see 1.28 in avatar) ?
Regards, ansar
Click to expand...
Click to collapse
Yes ... I'm using Euro 1.28 currently intentionally. I liked having Chevron so I could load Schaps Filexplorer and Advance Config beta to I could modify theme colours and sounds easily.
I was unable to do this with when I tried the Orange 1.30 (because Chevron no longer works as you know) and therefore went back to Euro 1.28 and hoping the Themes/Sounds carry on working after the official NoDo is released via Zune Update.
I will goto Euro1.30 ROM if you can verifiy Modified themes break even after the official Zune update ?

Infuriated-Germ said:
Yes ... I'm using Euro 1.28 currently intentionally. I liked having Chevron so I could load Schaps Filexplorer and Advance Config beta to I could modify theme colours and sounds easily.
I was unable to do this with when I tried the Orange 1.30 (because Chevron no longer works as you know) and therefore went back to Euro 1.28 and hoping the Themes/Sounds carry on working after the official NoDo is released via Zune Update.
I will goto Euro1.30 ROM if you can verifiy Modified themes break even after the official Zune update ?
Click to expand...
Click to collapse
Hi,
Even after official NoDo update thru zune it wont work
But if previous apps are a must then you can stay with 1.28
I hope after NoDo finalisation by MS and Operators, to deal with side loading too
In any case, now that all ROM options exist reverting back to any one is possible
Regards, ansar

ansar.ath.gr said:
Hi,
Even after official NoDo update thru zune it wont work
But if previous apps are a must then you can stay with 1.28
I hope after NoDo finalisation by MS and Operators, to deal with side loading too
In any case, now that all ROM options exist reverting back to any one is possible
Regards, ansar
Click to expand...
Click to collapse
Hi Ansar,
I think you slightly misunderstand. I'm not worried if apps like Advanced Config don't work after Zune Update. I just want the theme modifications I made earlier to remain on the phone after the Zune Update .... does that make sense ?

Infuriated-Germ said:
Hi Ansar,
I think you slightly misunderstand. I'm not worried if apps like Advanced Config don't work after Zune Update. I just want the theme modifications I made earlier to remain on the phone after the Zune Update .... does that make sense ?
Click to expand...
Click to collapse
Hi,
Nothing, it is hard reset after update, but what theme mods?, the background and wallpaper?, come on
Regards, ansar

ansar.ath.gr said:
Hi,
Nothing, it is hard reset after update, but what theme mods?, the background and wallpaper?, come on
Regards, ansar
Click to expand...
Click to collapse
Thanks ... I was under the impression that if you update via Zune, all your settings, appdata, txt msg's and call logs etc etc .... remain untouched. Therefore I was hoping Theme mods (in this case Accent Colors/custom ringtones) would also remain untouched

Infuriated-Germ said:
Thanks ... I was under the impression that if you update via Zune, all your settings, appdata, txt msg's and call logs etc etc .... remain untouched. Therefore I was hoping Theme mods (in this case Accent Colors/custom ringtones) would also remain untouched
Click to expand...
Click to collapse
Hi,
If this means NoDo update thru zune by MS maybe it is ok, will see soon
Regards, ansar

ansar.ath.gr said:
Hi,
A New ROM for the Orange_UK operator:
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U_by_ansar
see also thread: Windows Phone 7 Branded ROMs for Mozart
Till next version enjoy!!!
Regards, ansar
Click to expand...
Click to collapse
Dear Ansar
I am using OS Virsion 7.10.7740.16
Firmware number 2250.21.40600.061
.Radio Sotware number 5.59.09.05a_22.50.50.21U
.BoatLoader Virsion. 4.6.2250.0(129193)
Please advise me Which Rom is good for Debrading my UK Orange HTC MOZART 7.5 Mango Phone. So I can rid off Orange apps & Customization from my phone and get latest updates,Bacause im using my phone in India.Thanks in advance for you reply.

pyasa said:
Dear Ansar
I am using OS Virsion 7.10.7740.16
Firmware number 2250.21.40600.061
.Radio Sotware number 5.59.09.05a_22.50.50.21U
.BoatLoader Virsion. 4.6.2250.0(129193)
Please advise me Which Rom is good for Debrading my UK Orange HTC MOZART 7.5 Mango Phone. So I can rid off Orange apps & Customization from my phone and get latest updates,Bacause im using my phone in India.Thanks in advance for you reply.
Click to expand...
Click to collapse
Hi,
My Orange_UK_1.30.401, see the relevant thread
Regards, ansar

[Q] Mango and a new language (Dutch)?

Dear all,
Last week I bought my Omnia7 and I'm happy with the phone and WP7. I upgraded it yesterday to Mango RTM and everything went well. Now the only wish I have is a Dutch language on the Omnia. Is there already a solution for it?
Thanks in advance!
jeroen

Only roll back to NoDo and add dutch lagnuage into registry and it will download upon updating to Mango beta.

Only roll back to NoDo and add dutch lagnuage into registry and it will download upon updating to Mango beta.
Click to expand...
Click to collapse
Can you explain how I can do this? Just updated to the RTM Mango via Zune (released today) and still no Dutch language support, only the languages WP7 supported from day 1.
How do i simply 'roll back' to NoDo and how do I change a registry on my phone?
Thanks in advance.

To roll back to Nodo download the stock firmware from samfirmware.com. After this apply updates 7008 and 7392 by using Zune. When on 7392 you mast add the language to the registry and after this you can update to mango rtm again.

[Q] HD2 on Mango: Update available??

Hi,
I recently put WP7 Mango on my HD2, so I have the 7720.68 installed.
I was connected to a WIFI spot, and my phone told me "there is an update available"...
I don't really understand, and as I am not able to sync it with Zune, I cannot try to update it. What would it be? A radio update? Something else?
My radio is 5.51T.09.29a_22.32.50.10U
Any idea??

jinge said:
Hi,
I recently put WP7 Mango on my HD2, so I have the 7720.68 installed.
I was connected to a WIFI spot, and my phone told me "there is an update available"...
I don't really understand, and as I am not able to sync it with Zune, I cannot try to update it. What would it be? A radio update? Something else?
My radio is 5.51T.09.29a_22.32.50.10U
Any idea??
Click to expand...
Click to collapse
If you haven't synched with zune (so installed via cabs) you are now on the RTM 7720 and are being offered the cleanup update, which will take you to official mango (same version number BTW).
Not much difference to be honest.
Enjoy

Thanks, I didn't know there was a cleaning update following the RTM.
Any idea how I can connect to zune? I tried many things, but it is not recognized...

[Q] Omnia 7 firmware

Is there a difference between 2424.11.8.5 and 0222.11.8.5 or is it the same but different numbers because of carrier (t-mo and orange uk)?

222.11.8.5 is from orange .
mine too is 222.11.8.5 and i still wait for the firmware update to 2424.11.8.5

Can we update just this firmware with wp7 downloader.
I don't know what mean the check boxes in wp7 downloader.
If we check just "eboot", will it updated ?
thanks

my bootloader is 5.8.1.9 and i can't update the latest firmware because oit has the same bootloader (i got a error that i have the same name for firmware),
the only solution is to roll back an early version of bootloader than update the firmware manually.
but can i flash only a bootloader without hard reset the phone ?

abdelamine said:
my bootloader is 5.8.1.9 and i can't update the latest firmware because oit has the same bootloader (i got a error that i have the same name for firmware),
the only solution is to roll back an early version of bootloader than update the firmware manually.
but can i flash only a bootloader without hard reset the phone ?
Click to expand...
Click to collapse
Yes, using the WP7 Downloader and having checked only Eboot, it flashes only the bootloader without erasing your data. The flashing of the bootloader takes only a couple of seconds BUT... I tried that, flashed several bootloaders (5.8.0.8, 5.8.1.9), and when I tried to update the firmware with WP7 cab sender, I received the same error image. I didn't try flashing older bootloaders (coming from preMango roms, for example 4.12.0.9 from JL3 Rom) though, in risk of bricking the phone.

what would the best combination be if I want to get the Mango Firmware with Tethering enable when doing the Zune Update? I'm not too interested in unlocking the phone, as it seems like a lot of hassle, but I would like Tethering - if i install the UK Retail firmware will that get tethering enabled with the Mango update?

cm-mojo said:
what would the best combination be if I want to get the Mango Firmware with Tethering enable when doing the Zune Update? I'm not too interested in unlocking the phone, as it seems like a lot of hassle, but I would like Tethering - if i install the UK Retail firmware will that get tethering enabled with the Mango update?
Click to expand...
Click to collapse
No, if you flash a Rom with UK RETAIL csc, this is an UNBRANDED device, which is NOT receiving a wifi tethering update via Zune, at least for now. In order to have Internet Sharing on those devices, you need to unlock it.
BUT I had an unbranded device, and I could force tethering update of French operator SFR, not via Zune, but using WP7 cab sender. But that branded the device to SFR-FR network (without visible sideeffects though, NO problems with data, boot images or branded search engine). I could then change that tie from SFR to T-Mobile UK, via registry edit, and I could actually receive notification via Zune for the tethering update, but that update fails every time.
It seems that the SFR update (KI3) and the TMO-GB (KI4) are almost identical, and one cannot install one over another. Hopes that is the issue with those specific updates, and not the forthcoming ones.
So your best bet is to install a Rom (either engineer or retail, practice showed that engineer roms can be updated normally) using the T-Mobile UK csc (TMO), and then update it via Zune.
OR you could install an unbranded one using the UK retail csc, update to Mango without IS, and then force the IS update using KI4 T-Mobile firmware (use that over the KI3 SFR fw, it has slightly updated bootloader and firmware, radio is the same, and I suppose it's better to be branded under a UK network)

Thanks - looking at the thread:
http://forum.xda-developers.com/showthread.php?t=1131891
It seems the only available firmware with TMU is
Samsung Omnia 7 Firmware XXJJ6 ALL PROVIDERS
this is quite old - is this OK?
P.S My device is currently ORANGE UK

You can:
A. Wait till Orange UK offers IS update. As long as T-Mobile offered it, I suppose it's a matter of time that Orange follows sooner or later. If you can't wait proceed to B.
B. Flash that XXJJ6 preNoDo rom with the TMU csc (os 7008, it would be wise to unlock at this stage, as you made the hassle of going back to preNoDo). Then update normally via Zune to Mango with IS (two stage update)
C. Flash a Mango Rom, which can be found at samfirmware.com (need to create a free sign-up account). There are two roms I8700XXKH2 (with an french SFR csc) and I8700XXKH5 (with a DTM csc). Both those two carriers, french SFR and Germany T-Mobile offer update via Zune with IS. Only one update, that of the IS, as you are already on Mango. You will need to change language/locale and uninstall some carrier apps.
Also you could try flashing those roms using the TMU JJ6 csc. I have tried that in the past (not this exact combination, but different rom different csc) and I didn't face any problem. Beware though that I used preNoDo csc and preNoDo rom, so it may not apply in the case of preNoDo csc / Mango rom.

How about changing the operator in the registry would that help

jullian_d said:
How about changing the operator in the registry would that help
Click to expand...
Click to collapse
Yes that would be ok, I didnt mention it though as cm-mojo specifies he doesnt have an unlocked device, so he can't use registry editor
Anyway, change the network id in the registry to TMO-GB, and then update via Zune BUT you should not have applied (via Zune or WP7 cab sender) any extra fw update other than the ''default'' Mango (KH2 or KH5). If u have forced KI2 (Voda ITA) or KI3 (SFR FRA), you cannot update to KI4 (TMO-GB, DTM)

i tried to flash using WP7 Sender, but i keep getting an error that a file exists with the same name - not sure what that means

chemeng said:
If u have forced KI2 (Voda ITA) or KI3 (SFR FRA), you cannot update to KI4 (TMO-GB, DTM)
Click to expand...
Click to collapse
Since what i know KI2 is H3G ITA and not VODA ITA..Am I wrong?

i have KI2 (000-88)

T-Mobile UK (among others I suppose) is pushing update of the OS to 7.10.7740.16, but my update failed :-/ If only I had never forced SFR-FR with cab sender...

chemeng said:
T-Mobile UK (among others I suppose) is pushing update of the OS to 7.10.7740.16, but my update failed :-/ If only I had never forced SFR-FR with cab sender...
Click to expand...
Click to collapse
Hi what about to install TMO-UK/DE update and future other operators update? Will I encounter the same problems of SFR-FR update that prevents you from installing other operatos update? Now I reflashed may Omnia7 from 7004 to mango unbranded and I don't want to fall in the same error. Do you think I must wait or ...?

chemeng said:
:-/ If only I had never forced SFR-FR with cab sender...
Click to expand...
Click to collapse
what's the problem with SFR code?
Sent from my OMNIA7 using Board Express

chemeng said:
T-Mobile UK (among others I suppose) is pushing update of the OS to 7.10.7740.16, but my update failed :-/ If only I had never forced SFR-FR with cab sender...
Click to expand...
Click to collapse
Yeah, same thing here. Had TMO-DE version KH2 on my Omnia, via cab sender, too. Update to 7.10.7740.16 failed several times, finally putting my phone into restore mode, from which it was unable to recover.
Ended up reflashing my Omnia down to JJ6 again (with TMO-DE csc) and then letting Zune do it's updating. It took 5 updates and some two and a half hours, but now everything's fine again, i'm on 7.10.7740.16, firmware 2424.11.9.4
I'm shure this won't keep me from using the next unofficial solution to get the latest version some hours earlier than everybody else, but i'll keep my JJ6 rom & flashing tools warm and dry, in a safe place...

originally flashed KI4 from DE-Tmobile to get IS.. however 7740 update failed repeatedly.. mucked about a bit with Cab updates but no dice..In the end went back to XEUJL3 & then let Zune do it's thing for mango & firmware .. now on KI2 with 7740 (used a cab updater but perhaps I could've waited. Anyhow Compass works great & I think now I'll shell out the $9 to chevron to enable the IS instead of wasting another afternoon..

8112, 8773 (Tango) updates in Zune for unbranded/retail UK Omnia 7

I received notifications for the 8112 and then the 8773 updates. The firmware is KK2 (no change there).
If your phone is Interop unlocked this series of updates can be a bit devastating as 8773 seems to break Interop (unlock) and KK2 prevents unlocking. Leaves you in a sticky position. I had to send 8773 with the cab sender tool, relock, and then update to KK2 in Zune.

Hi, what operatoro code you have?
Thanks a lot

000-GB

Ok, I changed my mobile operator but It doesn't work

Try 000-88 as well. You may also want to try 000-UK.
The reason I say try a few is that my code has changed over time (oddly). It used to be 000-88 back in January but somewhere along the line it has become 000-GB, perhaps after the KK2 update I received after Tango?
MODeviceName= OMNIA7
MOName= (blank)

I'm updating manually... but thanks a lot

blueron said:
I'm updating manually... but thanks a lot
Click to expand...
Click to collapse
Odd...changing the code has worked for me in the past. Maybe that combined with wireless disconnect would do the trick.

Also works fine with T-Mobile Germany ROM. After flashing Samsung Omnia 7 Firmware XXJJ6 (T-Mobile CSC) and updating via ZUNE, I have now Tango and internet sharing. Don't know if T-Mobile UK gives internet sharing.
After all I have:
os version: 7.10.8773.98
firmware: 2424.11.9.4
radio: 2424.11.9.1
bootloader: 5.9.3.0

sebger said:
Don't know if T-Mobile UK gives internet sharing.
Click to expand...
Click to collapse
It does.