Related
Hi XDA Freaks,
habe meinem XDA das deutsche 4.0033 verpasst.
Vieles ist für meine Zwecke unnötig, andererseits sollte der Flashspeicher
dann bereits mit den zusätzlich benötigten Tools gefüllt werden können.
DAS Projekt 'cook your own ROM in a kitchen' unter http://www.xda-developers.com/ROMkitchen/ beschreibt dies für die englischen ROM's. Das ist nicht das einzige Handikap. Das Projekt arbeitet zudem unter
LINUX/Unix, und da kann ich (noch) nicht mithalten.
Bis heute gibt es wohl keine deutsche ROM-kitchen/Tool, welches diesen Ansprüchen genügt.
Vielleicht ist das ja Ansporn für gleichesinnte dies zu tun, oder ihre Erfahrung damit hier weiter zugeben.
Damit man sich vorstellen kann, was ich meine hier einen link einer englischen
ROM-kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen oder http://kitchen.romanweb.com/kitchen/processor.php.
Thanks, Guten Rutsch und Danke für eure Hilfe
mfg Reiner
oh my god this is a test to translate it in englich by google-tools:
Dear XDA ROM Freaks,
I gave German Rom 4.0033 to my XDA. Much is unnecessary for my purposes, on the other hand one the Flashspeicher should be able to be filled with the additionally needed Tools. The project ' cook your own ROM in A kitchen ' under http://www.xda developers.com/ROMkitchen/describes this for the English ROM's. That is not the only Handikap. The project works besides under LINUX/Unix, and there I (still) cannot keep up. Until today there is probably no German Rome kitchen/Tool, which is sufficient for these requirements. Perhaps that is to be done stimulus for gleichesinnte this, or their experience thereby here continue to admit. So that one can introduce oneself, what I mean here one left an English Rome to kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen or http://kitchen.romanweb.com/kitchen/processor.php. Good slide and thanks for your assistance mfg pure
schneire said:
Dear XDA ROM Freaks,
I gave German Rom 4.0033 to my XDA. Much is unnecessary for my purposes, on the other hand one the Flashspeicher should be able to be filled with the additionally needed Tools. The project ' cook your own ROM in A kitchen ' under http://www.xda developers.com/ROMkitchen/describes this for the English ROM's. That is not the only Handikap. The project works besides under LINUX/Unix, and there I (still) cannot keep up. Until today there is probably no German Rome kitchen/Tool, which is sufficient for these requirements. Perhaps that is to be done stimulus for gleichesinnte this, or their experience thereby here continue to admit. So that one can introduce oneself, what I mean here one left an English Rome to kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen or http://kitchen.romanweb.com/kitchen/processor.php. Good slide and thanks for your assistance mfg pure
Click to expand...
Click to collapse
Hy Reiner.
The Rom-Kitchen also works with the german ROMs.Only some files must be adapted to get it right working.
I´m also playing a bit with the rom kitchen and get it worked, so i´m using my own cooked rom.
With the Romkitchen your not able to rmove Programs from the rom, you only have the possibility to add software.
When you want to have a own cooked rom, you can sen me a email with the programms you want to have on it (only the programs you can add at the Demokitchen) and i can "cook" it for you....
HTH
Stefan
Hey, youve really got it working? Can you already cook a german rom with the .33-image?
Or can you post how you made it working, for being able to cook a rom on my own?
Bye, Dennis.
Hello,
can you help me please?
the charmer don't boot. It hangs at the bootscreen. at usb mode activesync dosent find the phone.
it shows.
ipl 2.06
spl 2.06.0000
gms 02.19.21
os 4.0.0.0
i want to flash the original firmware. how can i do?
greetings markus
Same problem pls an answer
Enter the bootloader mode and run official rom upgrade.
Bootloader Menu...
I can't make an update with the original firmware software. This Programm tolled me i must make a AktiveSync connetion. In Bootloader (CAM POWER Button) My computer find any USB device but activesync doesn't make a sync connection. Thats my problem. What can i do?
Greetings, Markus
Active sync wont make a connection when your in bootloader mode. The update program will work, it doesnt need active sync connection.
can you give me a link to the update?
I found it self. im so lucky because it do. sorry for my english. @ datenzwerg http://downloads.t-mobile.de/redire...ku3.3_38222_382117_026921_tmo_de_ger_ship.zip damit sollte es funktionieren auch wenn er eine sync verbindung haben will die brauch er aber nicht ein fach ins bootmenu und da dann usb an stecken und am computer starten ;-) bei mir hats geklappt
hoffe h mal das es funzt...
ich werde es probieren mehr als kaputt kann es eh net werden. hab halt a bisserl CID Panik da ich eine TMOBILE Austria sperre habe.
werde berichten wie es gegangen ist.
mfg markus
wrong ventor id
the german update doesn't run. the programm tells me wrong ventor id. i will dry the austrian one.
http://www.t-mobile.at/privat/servi...ftware/_files/MDA_compactII_AKU2_0_Update.exe
greetings, markus
Solved the Problem
Hello,
i've solved the problem.
The German 3.3 Version can't be install by ventor check.
The Austria 2.0 Version can't be install by Active Sync check.
I used the ROM form The Austrian Update and the Software from the
German update Pack.
My Charmer have a useable ROM!!!
Greetings Markus
aaaaaaaaaaaaaaaaaaaaaaaaaaaa
irgendwie klappt dat bei mir nich so recht
könnt ihr mir genau beschreiben was ich zu machen hab
ich hab das selbe problem mda2 Tmobile nach einem flash versuch geht es aus dem boot nicht raus usw
gibt es kein affengriff oder sowat damit er von alleine hoch bootet
thx
mfg
srox
dank an shayd
ua ich habs dank an shayd
Originally Posted by shayd
1. dowenload this t-mobile official rom
2. enter your Charmer into bootloader mode by pressing power + camera + reset, let go of the reset, but keep holding power + camera until the three colur screen will show up (that is bootloader mode).
3. connect the Charmer to your pc (make sure your battery is fully charged)
4. run the t-mobile rom.
5. good luck!
Hallo!
I had the same problem with the vendor Id and i tried to flash the austrian t-mob version ! It worked but at about 40% it saied error and now the bootloader goes on and within 5 sec it wents of! SO i cannot try to flash another time!
What can i do?
Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough
Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..
Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??
oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.
Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.
Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work
Hast du Skype ?
English:
Do you have Skype?
Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !
mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.
Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?
mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..
I think it's your Radio-Version that make problems. To solve the problem flash this
sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...
It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!
German below
So after about a week I think there are enough people willing to donate something so Alexander is able to buy this device and give us a nice ROM.
We signalize him that we are in need of a great ROM for a great hardware.
To keep it simple and to not pay any unnecessary fees I'd like to share his PayPal Donation-ID:
Mod Edit : Links Removed
The money will only be used to support buying the phone and developing the ROM.
What's going to happen?:
Alexander Martinz, creator and maintainer of Nameless ROM (https://nameless-rom.org/) will be buying a ZUK Z2 Pro and will in the first step port Nameless 3.0 (Marshmallow) to this device as it is stable and should be ready much faster. After that Nameless 4.0 (Nougat) will be ported to this device. It's nearly ready for other devices already.
As you can see, the source-changes are published at github.
A great "Thank you" to all donators and Alexander, for willing to give us a great ROM for a gret Phone.
###
So, nach ungefähr einer Woche denke ich, dass wir genug Interessierte User haben, die mit einer Spende Alexander beim Kauf des Gerätes und beim erstellen des ROMs unterstützen möchten.
Damit signalisieren wir ihm auch, dass wir wirklich Bedarf nach einem Spitzen-ROM zu einer Spitzen-Hardware haben.
Um es einfach zu halten und unnötige Gebühren zu vermeiden möchte ich hier direkt seinen PayPal Donation-ID teilen:
Mod Edit : Links Removed
Das Geld wird ausschließlich zur Anschaffung des ZUK Z2 Pro und die Entwicklung des ROMs genutzt.
Was passiert danach?:
Alexander Martinz, Gründer und Maintainer des Nameless ROM (https://nameless-rom.org/) wird ein ZUK Z2 Pro bestellen und im ersten Schritt Nameless 3.0 (Marshmallow) darauf portieren, da es stabil und bereits für andere Geräte fertig ist und daher viel schneller verfügbar sein wird für uns alle. Im zweiten Schritt wird Nameless 4.0 (Nougat) portiert werden. Es ist für andere Geräte bereits im Endstadium der Entwicklung.
Wie ihr sehen könnt werden die Quellcode-Änderungen auf Github zur Verfügung gestellt.
Vielen Dank an alle Spender und an Alexander, dass sie sich der Sache annehmen und uns zu einem großartigen ROM für dieses großartige Telefon verhelfen wollen.
#### Message from 23.09.2016 ####
German below
Okay. As there were several people who asked about it:
Alexander told me the following things:
When the ROM for Z2 Pro is out he will try to build one for Z2 too if it is really nearly the same device. He doesn't have one and will not buy one but will try to build one but it will be a blind flight.
The second more important thing he told me for everyone:
If he doesn't succeed on building a ROM for the Z2 Pro, he will REFUND!!! all donations.
I should tell this to all of you. Please be patient though as he does this besides his job and family tasks.
Right now he's on the Kernel combining the source code from ZUK with the one from Qualcomm and cleaning up the code.
He has built a new TWRP and got the custom kernel to boot on stock ROM.
Work is in progress
None of the other ROMs out there have sourcecodes available so he's doing it all from scratch.
I'll keep you informed.
######
German:
Okay. Da einige Leute danach gefragt haben:
Alexander hat mir folgendes mitgeteilt:
Wenn das ROM für das Z2 Pro fertig ist wird er versuchen eines für das Z2 zu bauen falls es wirklich fast die gleichen Geräte sind und das so einfach geht. Er besitzt keines und wird auch keines kaufen von daher wird es ein absoluter Blindflug.
Das Zweite, noch viel interessantere, was ich euch allen ausrichten soll:
Falls er am ROM scheitert und es nicht hin bekommt ein funktionierendes ROM für das Z2 Pro zu bauen wird er alle Spenden ZURÜCKZAHLEN!!!
Ich soll euch das allen mitteilen. Bitte übt dennoch ein wenig Geduld, da er dies für uns neben seinem Job und den familiären Verpflichtungen in seiner Freizeit macht.
Derzeit ist er dabei den Source-Code von ZUK mit dem von Qualcomm zu vereinen und ihn aufzuräumen.
Er hat ein neues TWRP gebaut und hat den Custom-Kernel auf dem Stock ROM bereits zum laufen bekommen.
Die Arbeit daran läuft.
Leider hat keines der anderen ROMs den Quellcode veröffentlicht, daher muss er es komplett von Grund auf neu machen.
Ich halte euch auf dem Laufenden.
#### Original message from 07.09.2016 (09/07/2016) ####
I keep it short because no one wants to read a lot of text:
Alexander Martinz, creator of Nameless-ROM and maintainer of several devices is willing to put his effort into building the ROM to this device.
But for this he needs the device. He normally wouldn't buy it and so there wouldn't be any ROM. If we at least can show him some financial support we can help him buy the device and try to build the ROM for us.
It will be maintained afterwards as long as he has the device and it's not too old.
This poll is to gather the interest how many people would be willing to donate and how much.
###
Ich fasse mich kurz weil niemand lange Texte lesen will:
Alexander Martinz, der Gründer von Nameless-ROM und Maintainer einiger Geräte wäre bereit sich mit dem portieren von Nameless-ROM auf dieses Gerät zu befassen.
Um dies aber zu machen benötigt er das Gerät. Normal würde er es sich nicht kaufen, von daher würden wir das ROM auch nie erhalten. Wenn wir ihm zumindest etwas finanzielle Unterstützung bieten könnten, helfen wir ihm, das Gerät anzuschaffen und zu versuchen das ROM für uns zu erstellen.
Es wird später auch zumindest so lange maintained werden, so lange er das Gerät besitzt und es nicht zu alt ist.
Diese Umfrage ist dazu da festzustellen, wer bereit ist etwas zu spenden und wieviel.
###
Link to ZUKfans.eu-poll:
http://zukfans.eu/community/threads/poll-whos-willing-to-donate-for-nameless-rom.354/
How are Nameless rom's compared to stock rom?
I have not used / heard of Nameless before.
If there are benefits I am happy to donate to support this.
shaunydub said:
How are Nameless rom's compared to stock rom?
I have not used / heard of Nameless before.
Click to expand...
Click to collapse
Perhaps I'm a littlebit biased but as soon as there's Nameless available for a device I'll ditch every other
It's very clean, close to stock but with little nice tweaks and a lot of power- and speed-optimizations. Most important it is rock solid and fast. Alexander is really a genius.
Every "needed" option is available, but no bloat.
A lot of stuff on CM is from him too. And Device-Control on Google Play Store for example too:
https://play.google.com/store/apps/developer?id=Alexander%20Martinz&hl=de
This is the official page with the officially supported devices:
https://nameless-rom.org/
Cool, I've been away from Android for a few years so I am out the loop on all the Rom / development scene currently.
Sounds like a good rom so I am happy to support as it looks like not many other roms are being developed for the Z2 Pro .
Do they do a good job of making the manufacturer specific functions work like the home button options? It is great to use specific fingers / actions to do different things & launch apps on this device.
I would also hope that the health screen that you swipe to in ZUI can somehow be carried over - I can't access this screen with other launchers as there is no widget available so I always have launch Zui home to use HR / UV sensors.
If these types of things can be included in Nameless it would be awesome.
shaunydub said:
Do they do a good job of making the manufacturer specific functions work like the home button options? It is great to use specific fingers / actions to do different things & launch apps on this device.
I would also hope that the health screen that you swipe to in ZUI can somehow be carried over - I can't access this screen with other launchers as there is no widget available so I always have launch Zui home to use HR / UV sensors.
If these types of things can be included in Nameless it would be awesome.
Click to expand...
Click to collapse
The sourcecode for the device has been released. I don't know how good it is because someone told me it would be "incomplete" so we hope best.
Regarding the health-screen: I don't think this can be ported as it is something in their launcher. If the sourcecode includes drivers for the heartrate-monitor it could be included but which app would be able to use it.
Basically nameless is AOSP-build so from the blank original sources, not CM or sth. like that so I don't think ZUI-specific features are built in.
For me personally most important is:
A stable, fast ROM with low battery drain and all the basic buttons and features working like the uTouch, Cam, Vibrating, LEDs, Fingerprint and so on.
The few builds of CM, RR, MoKee and so on show that uTouch works but is not configurable, vibration works but not everywhere, LEDs work, Fingerprint too and so on. So we have a good chance to have a 6 GB RAM 128GB Flash device with LTE Band 20 and a great ROM based on stock Android.
Ok great, thank you for the info. Sounds good, I didn't try the other Roms you mention due to things like vibration not working.
Happy to support this Rom as it sounds like it could be ideal. hopefully enough people support to make it happen.
I'm ready to give money for update support, every months, but i have a condition about that, OTA !
Still waiting my Zuk 2 Pro 6Gb/128Gb version, but i will happy to know we gonna have updates security and last release of androit with a community Rom and OTA update system.
NiTeSHiFT said:
German below
I keep it short because no one wants to read a lot of text:
Alexander Martinz, creator of Nameless-ROM...
Click to expand...
Click to collapse
Good day sir, My question to you is will this "Nameless Rom" be based on android 7.0? If so I am absolutely on board!
Swarai said:
Good day sir, My question to you is will this "Nameless Rom" be based on android 7.0? If so I am absolutely on board!
Click to expand...
Click to collapse
At first he would build it on 6.0.1. The second build will be based on nougat
There is not much else going on in terms of active ROM development and maintenance for this device so any chance for to support someone willing to create and maintain a ROM ongoing should be supported if you can.
It is a shame there are not more ROM's being developed given the specs of this phone.
tikilou said:
I'm ready to give money for update support, every months, but i have a condition about that, OTA !
Still waiting my Zuk 2 Pro 6Gb/128Gb version, but i will happy to know we gonna have updates security and last release of androit with a community Rom and OTA update system.
Click to expand...
Click to collapse
Nameless ROM is always with included OTA-updates and normally has nightlies available and a changelog to see if it's worth updating for everyone.
Swarai said:
Good day sir, My question to you is will this "Nameless Rom" be based on android 7.0? If so I am absolutely on board!
Click to expand...
Click to collapse
Like MacLaughlin said: The first "quick" release will be Marshmallow-based (6.0.1) so we have a good daily driver. The second would be Nougat based (7.0) with all the new goodies.
Donation started.
German below / Same text as in first post:
So after about a week I think there are enough people willing to donate something so Alexander is able to buy this device and give us a nice ROM.
We signalize him that we are in need of a great ROM for a great hardware.
To keep it simple and to not pay any unnecessary fees I'd like to share his PayPal Donation-ID:
https://www.paypal.me/amartinz
The money will only be used to support buying the phone and developing the ROM.
What's going to happen?:
Alexander Martinz, creator and maintainer of Nameless ROM (https://nameless-rom.org/) will be buying a ZUK Z2 Pro and will in the first step port Nameless 3.0 (Marshmallow) to this device as it is stable and should be ready much faster. After that Nameless 4.0 (Nougat) will be ported to this device. It's nearly ready for other devices already.
As you can see, the source-changes are published at github.
A great "Thank you" to all donators and Alexander, for willing to give us a great ROM for a gret Phone.
###
So, nach ungefähr einer Woche denke ich, dass wir genug Interessierte User haben, die mit einer Spende Alexander beim Kauf des Gerätes und beim erstellen des ROMs unterstützen möchten.
Damit signalisieren wir ihm auch, dass wir wirklich Bedarf nach einem Spitzen-ROM zu einer Spitzen-Hardware haben.
Um es einfach zu halten und unnötige Gebühren zu vermeiden möchte ich hier direkt seinen PayPal Donation-ID teilen:
https://www.paypal.me/amartinz
Das Geld wird ausschließlich zur Anschaffung des ZUK Z2 Pro und die Entwicklung des ROMs genutzt.
Was passiert danach?:
Alexander Martinz, Gründer und Maintainer des Nameless ROM (https://nameless-rom.org/) wird ein ZUK Z2 Pro bestellen und im ersten Schritt Nameless 3.0 (Marshmallow) darauf portieren, da es stabil und bereits für andere Geräte fertig ist und daher viel schneller verfügbar sein wird für uns alle. Im zweiten Schritt wird Nameless 4.0 (Nougat) portiert werden. Es ist für andere Geräte bereits im Endstadium der Entwicklung.
Wie ihr sehen könnt werden die Quellcode-Änderungen auf Github zur Verfügung gestellt.
Vielen Dank an alle Spender und an Alexander, dass sie sich der Sache annehmen und uns zu einem großartigen ROM für dieses großartige Telefon verhelfen wollen.
Donation sent
NiTeSHiFT said:
To keep it simple and to not pay any unnecessary fees I'd like to share his PayPal Donation-ID:
https://www.paypal.me/amartinz[/B]
Click to expand...
Click to collapse
Donated having used regular Paypal link from their site as paypal.me doesn't work in Russia
Hi all and thanks for the initiative.
I'll 100% donate for the non pro Z2. Any possibility of including it as well?
Sent from my Zuk Z1 using XDA Labs
vittogn said:
Hi all and thanks for the initiative.
I'll 100% donate for the non pro Z2. Any possibility of including it as well?
Sent from my Zuk Z1 using XDA Labs
Click to expand...
Click to collapse
I think he's buying only a Z2 Pro. There are more ROMs for the Z2 than for Pro.
NiTeSHiFT said:
I think he's buying only a Z2 Pro. There are more ROMs for the Z2 than for Pro.
Click to expand...
Click to collapse
Tx.
Nameless would be good any way.
Sent from my Zuk Z1 using XDA Labs
shaunydub said:
Donation sent
Click to expand...
Click to collapse
Likewise
NiTeSHiFT said:
I think he's buying only a Z2 Pro. There are more ROMs for the Z2 than for Pro.
Click to expand...
Click to collapse
But there isn't a Z2 sub forum, where are those roms?
Donation sent too, 15€.
Hi to all, I'm really desperate because I purchased this Bosion Android Headunit weeks ago and know everything apparently works but I have not Image of anything, even touchscreen works, and I don't think it's a hardware issue because everything started whit an "APP update". The problem I had like many users, was that I couldn't access to my Google Account, everytime when I've tried to sign-in, it took me out from the sign-in screen (like this
) Then the seller sent me a zip file with "os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1" and mcu .img file "mcu-202007280001KC1-1650". When I completed installing the os_update I lost Image, then he sent me another os_update to burn via phoenix card on an sd card, but I've never gained image again. The radio boots, and works, even I can make Bluetooth calls but I don't see anything (even there's backlight on the display). Can someone help me whit this issue? I've tried to get in recovery mode, but there's no way to enter it. Here's how it's working
Not MTCB, have requested Mod moves to Android head units forum, but is unable to move this thread.
carlos_graniel said:
Hi to all, I'm really desperate because I purchased this Bosion Android Headunit weeks ago and know everything apparently works but I have not Image of anything, even touchscreen works, and I don't think it's a hardware issue because everything started whit an "APP update". The problem I had like many users, was that I couldn't access to my Google Account, everytime when I've tried to sign-in, it took me out from the sign-in screen (like this
) Then the seller sent me a zip file with "os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1" and mcu .img file "mcu-202007280001KC1-1650". When I completed installing the os_update I lost Image, then he sent me another os_update to burn via phoenix card on an sd card, but I've never gained image again. The radio boots, and works, even I can make Bluetooth calls but I don't see anything (even there's backlight on the display). Can someone help me whit this issue? I've tried to get in recovery mode, but there's no way to enter it. Here's how it's working
Click to expand...
Click to collapse
Hi mate. I have logging into Google problems. After many tries of many things I looked at online and no images of updates and no real help anywhere I decided to contact the seller and he sent me this image Maybe it will help you as well. The way I have installed updates before is by copying the files to an SD-Card unplug the power from the back of the HU put the SD-Card in the GPS SD-Card slot then plug the power back in and turn it on. The system should recognize the update and start loading. I have not done mine yet. I literally just got the files sent to me. I looked up the file names and found your post.
I did this tonight and now my unit boots with a white screen like yours
It was working fine only Google sign-in didn't work.
Oh well, I will keep this post updated if I find a fix. If I don't post an update
that just means I have not found a solution yet.
Do you have resolve?
carlos_graniel said:
Hallo an alle, ich bin wirklich verzweifelt, weil ich dieses Bosion Android Headunit vor Wochen gekauft habe und weiß, dass anscheinend alles funktioniert, aber ich habe kein Bild von irgendetwas, sogar der Touchscreen funktioniert, und ich glaube nicht, dass es ein Hardwareproblem ist, weil alles mit einem angefangen hat "APP-Update". Das Problem, das ich wie viele Nutzer hatte, war, dass ich nicht auf mein Google-Konto zugreifen konnte, jedes Mal, wenn ich versuchte, mich anzumelden, wurde ich aus dem Anmeldebildschirm herausgeholt (wie hier
) Daraufhin schickte mir der Verkäufer eine Zip-Datei mit „os_update_KC1C0107-O01-1.0.4.9.1_20201209_130326_b1“ und mcu .img-Datei „mcu-202007280001KC1-1650“. Als ich die Installation des os_update abgeschlossen hatte, verlor ich das Image, dann schickte er mir ein weiteres os_update, um es per Phoenix-Karte auf eine SD-Karte zu brennen, aber ich habe nie wieder ein Image gewonnen. Das Radio bootet, und funktioniert, sogar ich kann Bluetooth-Anrufe tätigen, aber ich sehe nichts (auch wenn das Display hintergrundbeleuchtet ist). Kann mir jemand bei diesem Problem helfen? Ich habe versucht, in den Wiederherstellungsmodus zu gelangen, aber es gibt keine Möglichkeit, ihn aufzurufen. So funktioniert es
Click to expand...
Click to collapse
Hellp,please you can send me the Software? I have the same and not work.