How to cook a German ROM in a kitchen - MDA, XDA, 1010 Software Upgrading

Hi XDA Freaks,
habe meinem XDA das deutsche 4.0033 verpasst.
Vieles ist für meine Zwecke unnötig, andererseits sollte der Flashspeicher
dann bereits mit den zusätzlich benötigten Tools gefüllt werden können.
DAS Projekt 'cook your own ROM in a kitchen' unter http://www.xda-developers.com/ROMkitchen/ beschreibt dies für die englischen ROM's. Das ist nicht das einzige Handikap. Das Projekt arbeitet zudem unter
LINUX/Unix, und da kann ich (noch) nicht mithalten.
Bis heute gibt es wohl keine deutsche ROM-kitchen/Tool, welches diesen Ansprüchen genügt.
Vielleicht ist das ja Ansporn für gleichesinnte dies zu tun, oder ihre Erfahrung damit hier weiter zugeben.
Damit man sich vorstellen kann, was ich meine hier einen link einer englischen
ROM-kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen oder http://kitchen.romanweb.com/kitchen/processor.php.
Thanks, Guten Rutsch und Danke für eure Hilfe
mfg Reiner
oh my god this is a test to translate it in englich by google-tools:
Dear XDA ROM Freaks,
I gave German Rom 4.0033 to my XDA. Much is unnecessary for my purposes, on the other hand one the Flashspeicher should be able to be filled with the additionally needed Tools. The project ' cook your own ROM in A kitchen ' under http://www.xda developers.com/ROMkitchen/describes this for the English ROM's. That is not the only Handikap. The project works besides under LINUX/Unix, and there I (still) cannot keep up. Until today there is probably no German Rome kitchen/Tool, which is sufficient for these requirements. Perhaps that is to be done stimulus for gleichesinnte this, or their experience thereby here continue to admit. So that one can introduce oneself, what I mean here one left an English Rome to kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen or http://kitchen.romanweb.com/kitchen/processor.php. Good slide and thanks for your assistance mfg pure

schneire said:
Dear XDA ROM Freaks,
I gave German Rom 4.0033 to my XDA. Much is unnecessary for my purposes, on the other hand one the Flashspeicher should be able to be filled with the additionally needed Tools. The project ' cook your own ROM in A kitchen ' under http://www.xda developers.com/ROMkitchen/describes this for the English ROM's. That is not the only Handikap. The project works besides under LINUX/Unix, and there I (still) cannot keep up. Until today there is probably no German Rome kitchen/Tool, which is sufficient for these requirements. Perhaps that is to be done stimulus for gleichesinnte this, or their experience thereby here continue to admit. So that one can introduce oneself, what I mean here one left an English Rome to kitchen: http://cuba.calyx.nl/~jsummers/ROMkitchen or http://kitchen.romanweb.com/kitchen/processor.php. Good slide and thanks for your assistance mfg pure
Click to expand...
Click to collapse
Hy Reiner.
The Rom-Kitchen also works with the german ROMs.Only some files must be adapted to get it right working.
I´m also playing a bit with the rom kitchen and get it worked, so i´m using my own cooked rom.
With the Romkitchen your not able to rmove Programs from the rom, you only have the possibility to add software.
When you want to have a own cooked rom, you can sen me a email with the programms you want to have on it (only the programs you can add at the Demokitchen) and i can "cook" it for you....
HTH
Stefan

Hey, youve really got it working? Can you already cook a german rom with the .33-image?
Or can you post how you made it working, for being able to cook a rom on my own?
Bye, Dennis.

Related

Windows mobile 2003 for german XDA I...

Some days ago I updated my XDA I to the current german ROM Version avaiable at O2online.de (it's 3.19.01 GER with radio v4.21), because I hoped that wmodem is included at that version. Unfortunately it wasn't, although it is included at an english version with a minor version number. As there were also some other disappointing things, I decided to write a letter to O2. Here's a part of their answer:
Das eigentliche Anliegen Ihres Schreibens ist die Modemfunktionalitaet des xda I. Die Ausstattung des Geraetes in England und Deutschland ergab sich aus den Ergebnissen diverser Umfragen. Diese zeigten eindeutig, dass eine Modemfunktionalitaet in Deutschland von den zukuenftigen Nutzern nicht priorisiert wurde. Im Verlauf der Zeit hat sich allerdings gezeigt, dassŸ auch diese Funktion genutzt wird. Daher verfuegt der xda II ueber die Modemfunktionalitaet. Ein Nachruesten des xda I ist leider nicht moeglich, da es zusaetzliche Hardwarekomponenten erfordern wuerde.
Der Service fuer den xda I wird natuerlich weitergefuehrt. Verschiedene Updates haben die Funktionalitaet bereits verbessert. Ein Update auf WIN CE 2003 ist ebenfalls noch in Planung. Evtl. wird es dann auch moeglich sein, den xda I als Modem zu nutzen.
Die Fax-Funktionalitaet wird wohl auch in naher Zukunft leider nicht gegeben sein. Bedingt durch bestimmte Netzeigenschaften (in unserem Falle die Homezone), funktioniert es nicht. Bisher ist es leider noch nicht gelungen, dieses Problem zu loesen.
Click to expand...
Click to collapse
I'll try to translate it into english:
As a poll in germany showed, that most users didn't ask for a modem feature at the XDA I (in opposite to british polls), it is not included at the XDA I. But by and by we got to know that such a feature is used and therefore now it is included at the XDA II. An upgrade for the XDA I is not possible as there are some hardware components missing.
The service for the XDA I will be continued as a matter of course. There have already been some upgrades and also an upgrade to WIN CE 2003 is still planned. Possibly one will therefore be able to use the XDA I as a modem.
A fax functionality will be not possible in a near future. It doesn't work due to some properties of the network (in that case it's the homezone-funktionality). By now it was not possible to solve that problem.
Click to expand...
Click to collapse
It's quite interesting, that some necessary hardware components are not necessary any more just by doing a software upgrade...
Try this....
The T-Mobile Version of such an update is here:
www.mathiaspohl.de/mda
This version includes the wmodem file.
Enjoy !
regards, Koponet
I currently have the Special edition rom for my T-mobile MDA (XDA-1), I have been using the WMODEM via a serial cable to my laptop for a long time, but now I would like to upgrade the firmware to PPC2003 from T-Mobile website, does the download from http://www.mathiaspohl.de/mda include WMODEm for PPC2003?
lzxing said:
I currently have the Special edition rom for my T-mobile MDA (XDA-1), I have been using the WMODEM via a serial cable to my laptop for a long time, but now I would like to upgrade the firmware to PPC2003 from T-Mobile website, does the download from http://www.mathiaspohl.de/mda include WMODEm for PPC2003?
Click to expand...
Click to collapse
Yes. This ROMs includeeds the wmodem application.
But it´s a German ROM. So all is in German and nothing in english. It´s not possible to switch the language....
Stefan

Whats your Version of Camera app? Specialy at german AKU 3.3

Is there any newer Version of the Camera Software than 3.00 (Build 22764)?
Greetings MrMmmkay
Sorry das ich Deutsch schreib, mein Englisch is net so gut, will grad eh nur die Deutschsprachigen anschreiben ^^.
Kann mal bitte jemand der das aktuelle deutsche AKU 3.3 von t-mobile drauf hat gucken was er für ne Version der Kamera Software hat? und falls die neuer als 3.00 (Build22764) ist mal die camera.exe aus dem Windows verzeichnis hochladen?
Danke!
Gruß MrMmmkay
I have Camera v.3.0 build 22844
Oh, good to know that there are still new versions ^^.
Can you please load up the camera.exe in your windows directory here?
Greets
here you go,let me know if it works or you need some .dll's
Thanks!
If there are any newer Version out there, please load it up here ;-)
Greets
EDIT: Works fine, looking now for any improvements
Nobody out there with German AKU3.3?
Thank you very much.
unapproachable2kx said:
here you go,let me know if it works or you need some .dll's
Click to expand...
Click to collapse
thanks a lot
The Camera-Build of the German AKU3.3 is 25626!
I've added a complete OEM-Package with the German MUI-File.

Problems with roms....

Now hello people, I simply opens sometimes nen new subject, because I really in despair am. So I begin at the beginning sometimes. I wanted to me how I have already written in the other Tread, the m amine 2.0 flashen. If this has also acted like in the instructions described. So HrdSPL has folded everything. Only when I wanted then Rome Flashen, nothing has happened and I had my normal O2 Rome on it again. Then ahbe I the shaking it tries out where I had then the problem which I had no more receipt what I wanted to repair by another radio Rome. If everything has used, however, nothing. Now I have downloaded to me \ " 3LIT3 \ " IV Rome. everything is also quite good so far, only everything is there, unfortunately, on in English and I have Tom Tom 7 where my old maps do not go any more. When I now tried ahe, over again the m amine 2.0 to flashen, came he to 100% and then went out. . it came fehlermeldung image \ " corruptet \ " is and on the orbit 2 then the boat screen with the SPL 2.20 and on the right odebn RUUNBH. wars came.... Now I know really nciht more what I should do .... everything an O2 Rome tries to flaschen also miss. I hope somebody can help me here as fast as possible. Thank you schonmal in prerau. Now Olli Having tries sometimes the M.Amine Lite to flaschen, however, WWE. There everything claps funny enough
Hi 'oliver12685'
Nice Post ! But the problem is can not understand one bit of it .. though you tried hard ..
Hy,
sorry for my BAD english! it´s not so good.
can i write this in German??
oliver12685 said:
Hy, can i write this in German??
Click to expand...
Click to collapse
Well, I don't know German, probably you can write in German and try to give an English translation, and hope for any German friends on the forum to help.
Hi, I´m from Germany, but I don't understand your problem in English
German:
Hi, Ich bin Deutsch, aber kann dein Problem leider nicht auf Englisch verstehen. Schreib es bitte auf Deutsch und Englisch.
Ok I Try it in english
ok, now on my Handy I have the "3LIT3_VI_Full" Rom from this Forum.
The Problem is, its now in english.
I would the M.Amine 2.0 Rom in German, But its dosn´t work.
when i flash the Hard SPL its all fine. But when I Flash the M.Amine Rom it get to 100 % and than there comes an Error.
After a Restart comes the Reboot Screen . in the right corner is "RUUNBH" .
Why it dosn´t work?? Hard SPL 2.20 is flased.
So, I hope you understand me now
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
mutant92 said:
You needn't to re-Hard-SPL. When it's flashes once time, you needn't to do it a second time.
Have you tried it by another ROM? Is there the same problem?
German:
Du musst Hard-SPL nicht flashen, wenn du es schon einmal gemacht hast, des seit denn du hast den originalen Bootloader wieder geflasht.
Hast du es schon einmal mit einem anderen ROM versucht? Also kein M-Amine oder 3LIT3? Tritt da dasselbe Problem auf?
Click to expand...
Click to collapse
Das ist ja das Koriose, ich habe das Light M-Amine Rom WWE geflasht und da ging alles einwandfrei. und vorher hatte ich Bepe´s Rom. Da hatte ich das Problem, das ich so gut wie keinen empfang mehr hatte.
I have tryed the M-Amine Lite WWE Rom and its worked fine. But the Full Rom doesn´t work
Hast du Skype ?
English:
Do you have Skype?
Hi,
How are your flashing? And what is the error at 100%. Check the corresponding error code in the readme.doc from OEM. If you are flashing using SD card, better run from Win-XP (preferably). Do a Hard Reset, connect to ActiveSync and run the RUU at 'align screen'. Good Luck . !
mutant92 said:
Hast du Skype ?
Click to expand...
Click to collapse
Ja ich habe skype.
Could I get your Skype-Name (PM?!) please to help you?
German:
Kannst du mir bitte deinen Skype-Namen geben, damit ich dir besser helfen kann?
mutant92 said:
Could I get your Skype-Name (PM?!) please to help you?
Click to expand...
Click to collapse
At last there a German hand holding another. Enjoy ..
I think it's your Radio-Version that make problems. To solve the problem flash this
sorry for my poor english!!!
i have the same problem.
i have download an original rom : RUU_Polaris_HTC_WWE_1.25.405.1_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
on xda
and install it.
after i sucessfull intall the amine in french...
It can be your Radio! Please look at the Link given in this Thread, there you can download the Radio and your problem should be solved
Good Luck!

Problem with Acer beTouch E200

Hello,
Im a user from Germany and my English is notso good, but I hope you can help me.
My Problem: I have a ACer BeTouch E200. After installing a ROM Udate (acer orgininal) I can only see on my display: Download incomplete: WM HEX. Wath could I do? I hope you can help me. Thanks
try to flesh it agan if you still can !
I dont come in the bootloader
so I really don't know..anyway at the worst if you can't get anything bring it to acer assistance, it seems that it's not your fault, you should be cover by warranty ! try to ask brainmaster is deutch too maybe he can help, at least with languages !
okay, now on my display please wait... I think im in the bootloader? but i need a ROM
niemzi said:
okay, now on my display please wait... I think im in the bootloader? but i need a ROM
Click to expand...
Click to collapse
I found a ROM but only in English: Download.
Thanks for your help, but i have started the bootloader yesterday and today i see the same words at the display: please wait...
personally i think i must send the device to acer.
Maybe, you have a idea? Could I install a ROM over the MicroSD card?
niemzi said:
Thanks for your help, but i have started the bootloader yesterday and today i see the same words at the display: please wait...
personally i think i must send the device to acer.
Maybe, you have a idea? Could I install a ROM over the MicroSD card?
Click to expand...
Click to collapse
You can´t flash ROM over the MicroSD Card. I think that there is nothing you can do - so you need to send it to Acer.
Hi schick mir mal ne deine Mail per PN ich schau morgen mal ob ich dir ne Anleitung schicken kann damit du uns das E200 nicht schicken musst.
MfG
chris
ShadowK10 said:
Hi schick mir mal ne deine Mail per PN ich schau morgen mal ob ich dir ne Anleitung schicken kann damit du uns das E200 nicht schicken musst.
MfG
chris
Click to expand...
Click to collapse
Kommst du von Acer Service?
Ja , werde aber keine Geheimnisse ausplaudern
Bin auch nur hier weil ich eigentlich überzeugter HTC user bin und die MODs für das S200 total genial finde.
Gefällt Ihr auch mein Modulares ROM?
Restoring acer e200 not using ActiveSync, thanks to emulator WM PC
Russian manual http://acer-club.ru/-t3975.html
thanks Russian men nowaym, slav375, DeadMan
Good luck
wo kriegt man eigentlich ein deutsches ROM her?

Need help translating from german

Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Habe ich gestern bei meinem Handy auch gesehen das diese Meldung auftaucht.
- Wenn Du dem auf Default zurücksetzt nimmt er das von Einsteino vorgegebene Band wieder aktiv (meine 2.21). Bekommst aber beim nächsten mal die selbe Meldung. Aber das zurücksetzen auf DEFAULT geht damit.
- Wenn Du ein anderes Band auswählst und bei dem beschriebenen Fehlerfensterchen "later" anklickst, wird Deine Wahl übernommen.
An sich, finde ich, ein Schönheitsfehler. Das zurücksetzen auf Default geht, die Wahl eines anderen Bandes auch. Nur eben mit kleinem Fenster.
Click to expand...
Click to collapse
Thanks!
shloms said:
Hi,
I'm trying to use "basebandswitcher" an App for switching bands for the Defy.
I have some errors that I couldn't find solution for anywhere, but a post on a german forum that seems to solve it.
Problem is google translate, and other online translators, do a pretty bad job translating it.
Anyhow I hope some nice German member could help with translating this small quote:
Thanks!
Click to expand...
Click to collapse
"I had the same message on my phone yesterday
-if you go back to default it will take the band given by Einsteino. But you will get the same message next time but going back to default works
-if you take a diffrent band and klick "later" in the errorwindow it works"
Thank you very much, loehry
Human translations beats Google

Categories

Resources