ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?
1) First try another sd-card to see if the sd-card has a problem.
2) Either your ROM has a problem or it is your computer. Please try it again with another computer just to make sure that yours is not the cause for this behaviour.
3) If the problem persists try flashing your ROM again, but in recovery mode: Choose Wipe Data /Factory Reset, then go back to main menu. Choose Wipe Cache Partition, then go back to main menu. Go to Advanced and choose Wipe Dalvik Cache, then go back to main menu. This will delete all the data on the phone and make sure the ROM is installed properly.
Oxygen ROM do not allow to use Internal memory in usb mode, but sd card works 100% tested.
the worst thing for me is that, when im in recovery again appear like cd drive, so the phone for the computer from the begining is cd drive.
when i go in device manager it shows that HSUSB driver is not installed properly is it the same for you guys?
it only shows that my device is android usb device, but not mass stotage
THE same problem
stan40 said:
ok i runing Oxygen and everithing is just fine,but i have one smaal problem: i can't use USB Mass storage mode.
Lets say the phone is turned absolutley off , when i turn it on and try to get in recovery mode the computer detects it and it shows it like CD Drive(empty), ok i tried some of the options of recovery- i mount/unmount, format , fix .. etc. still appear like CD Drive.
Ok i turned on the phone, and then i choose the android option to use the phone like USB flash drive, again it appeared like CD Drive , wich automaticly means only read but not write on memory card, and now every time i have to remove the card from the phone put it in SD card reader and upload on it some music, photos etc ...
Anyone with a solution?
Click to expand...
Click to collapse
THE same problem! How can you deal with it?
This thread is old...
Sent from my GT-P1000 using Tapatalk 2
The god dam windows and drivers was the problem. Actualy i have a huawei USB modem for internet, and the drivers which i used for the modem messed with the drivers for the phone. The solution was to remove the USB Modem drivers and then reinstall them again and this time the computer discover the phone like mass storage.
Related
finally rooted my phone, BUT, it wont read the SD card, nor when i hook it up to my pc i can'y get anything to come up, i'm using Windows 7 x86, plz plz help
Android Version 1.1.1
Baseband 63.18.55.06PH_6.35.15.11
Kernel
2.6.29-ninpo
[email protected] #14
Mod Version
Froyd-1.1.1-Hero
and also launcher pro wont uninstall =[
Build Number
FrpydVillain1.1.1
and also my contacts won't update with their face beeok, except one... please help =[
1. (SD Card) try going into the settings and formatting it then remount it.
2. (Launcher Pro) Launcher Pro won't installed in the normal fashion because its installed the the system folder. You can get rid of it via ADB although Froyd doesn't have any other launcher installed so you will want to install another one before hand. (and if you install a new one you might as well just swap over to it rather than un-installing
Wez.
i tried to remount, and it wont even read it, when i hook it up to my pc nothing happens. it doesn't even read the new hardware or give me the option to just charge... =/
Ideally, i would recommend you update to latest Froyd 1.2.1, but I'm not sure of what the issue here is...
I'd suggest backing everything on SD to your PC via a card reader, then repartitioning it using recovery, and trying that.
ok, i can boot into carebear, what should i do next? a whole new root? and is Froyo the best ROM to use?
the thing is, i cant get into debugging,i can get into the carebear, but idk what to do from there -.-;
I have the same problem !!!!!!!!!!!!!!!!!!!!!!!
When you attach it to your PC do you mount the sd card? If you drag down the notification bar when it is connected and select "usb connected" then choose "Turn on USB storage". This will mount the SD card.
there is no icon no mount i used the widget no luck
asad510 said:
there is no icon no mount i used the widget no luck
Click to expand...
Click to collapse
It isn't an icon to mount it. What widget are you talking about?
You simply drag down the notification bar > press "usb connected" > press "turn on usb storage"
factualpuddle said:
the thing is, i cant get into debugging,i can get into the carebear, but idk what to do from there -.-;
Click to expand...
Click to collapse
You need to:
1. Download the latest version from http://www.villainrom.co.uk/releases/FroydVillain1.2.1/download.php
2. You simply drag down the notification bar > press "usb connected" > press "turn on usb storage" - alternatively plug the sd-card into an sd reader and follow the rest
3. Open the SD Card folder on your computer.
4. Copy the rom from your computer to your SD Card, do NOT change it, extract the files or put it in any folders
5. Unplug your phone and turn it off (put the sd card in now if you used the reader)
6. Turn the phone on by holding down Home and Power till you get to the custom recovery screen.
7. Select Wipe from the menu, then select:
Wipe data/factory Reset
Wipe Dalvik-cache
Wipe SD:ext partition
Press back button
Select Flash Zip from SD Card
Select the file
Click Confirm
N.B. Ignore any "errors", they are normal and usually mean you're not using that feature.
8. Once it is done, select Reboot and you will boot into the OS
in m,y phone it wont even read that there is an SD card -.-; and when i hook it to pc, it still shows none, i KNOW it works, its a braand new PNY 4 Gb...
As I said - hook it up to a sd card reader, place the files on the card and then boot into recovery with the sd card in and you should be able to flash from there.
it boots into carebear mode and doeskin recognize th3e flash name of the update.zip on my flash
nothing happens, it just charges when i hook it up to the pc, no notifications...
I'm the only one having problems with usb mass storage? With all builds from all chef and all kernels it happens the same. I can read from the pc what is on the SD, but if I copy a file Android dont see it , the file size is 0. And new files created in android can't be readed by windows either (I can only read the files that were written on the SD before the last android boot)
I missing something? I tryied dismounting the SD from android with same results
Are you using it in the same way USB MASS STORAGE in WM6.5 ???
I use USB storage all the time and in every andrioid build I've used(about 20) I've never had any problems. There are many people like me that also have no problems, but there are also many like you that have plenty of problems. I'm not sure that anyone really knows why.
RobertsDF said:
I use USB storage all the time and in every andrioid build I've used(about 20) I've never had any problems. There are many people like me that also have no problems, but there are also many like you that have plenty of problems. I'm not sure that anyone really knows why.
Click to expand...
Click to collapse
Thanks for answering. Do you have 2 partitions on the sd ?
Just want to check a few things:
1: you plug in via usb and select "disk drive"
2: you are not still connected via usb when trying to read the items on the sd card?
3: When you disconnect the usb, you use the usual method (right click the icon in the taskbar and select "safely remove hardware") then wait for the SD card to be prepared by android before accessing it?
Also, how are you accessing the files in Android?
Reno_79 said:
Just want to check a few things:
1: you plug in via usb and select "disk drive"
2: you are not still connected via usb when trying to read the items on the sd card?
3: When you disconnect the usb, you use the usual method (right click the icon in the taskbar and select "safely remove hardware") then wait for the SD card to be prepared by android before accessing it?
Also, how are you accessing the files in Android?
Click to expand...
Click to collapse
1 & 2: Yes. Windows assing the drive letter and can read it fine.
3: I connect Android to pc, choose USB MASS STORAGE, in windows access the new drive letter, rename a file , choose "safele remove hardware", disconnect the cable, wait for Android to "prepare the sd" , go to the file and it has the old name!!! the weird thing is that if I connect to the pc again, I see in the pc the new name!
Is like Android is working with his own FAT32 table IN MEMORY and not refreshing it.
I tried Ghost Commander/ES file manager/Root Explorer, all with the same results.
PD: I found something else... If I DISMOUNT the SD from Android Im still able to access it with ES File Manager,etc. So its not really dismounting it Why can this be happening with all builds/roms?
I have the same problem. Strange thing is it worked fine fore the first couple of days. Anybody have a solution?
Try using "Rescan Media" app after you copy your files to the SD
Still nothing. I have to boot back into winMo to transfer files to my SD card! This is really annoying,
Plenty of other tools provide media scan as well, like Optimize toolbox, Switch pro widget and more. they all worked for me.
[edit] sorry, optimize toolbox doesn't offer it, it just clears the cache :/
power control plus however has this function as well.
i did nothing new, no update, just while installing some games, pc suite got a freeze, i restarted my pc and my DHD, all applications installed on the sd card are not working, but my sd card is mounted and i can access sd card root using astro, also i tried to install some apps using astro, but installation bar progress takes forever and didnt finish, even installing from market did not start.
any suggestion on what is going here?
P.S.: i tried to unmount than mount my sdcard, and nothing changed.
this is turning very serious, plz i need help.
i did a factory reset, and i did install the stock rom from sdcard, both ways keep the problem, that i cant sync the device or mak it appear as disk drive, i can only make a internet passthrough connection, but no drive no htc sync, i did a lot of tries, debug on off, connect reconnect usb, restart device, restart pc, use another pc, i also have stock rom .6, and original kernel with latest htc sync installed.
m very frustrated now, i have no recovery, the device wont accept installing anything from pc, or from market place, installing process takes forever and do nothing, the problem is in the device not the pc, is there a way to get back my device to operate properly, please help
Is you SD card corrupted? Can you access it?
i will list it again as following:
-stock rom .6 with original kernel
-radio s off
-no recovery
-sd doesnt seems corrupted cause i can access it once with astro, and i can access it with pc suite only as disk drive
-i tried with mounted and unmounted sd card (no fix)
-i did a factory reset (no fix)
-i did install the rom from sdcard (no fix)
-i tried another pc for syncing (no fix)
-i can only make internet passthrough but no disk drive or htc sync
-in market i can press on install but nothing will happen
-in desktop htc sync, if i get luck and see it, if i browse to install an apk, it will simply freeze.
please all i need urgent help, i think something bad happened to my device
How about copying all the data from yr sd card into another card? Your current card could be faulty but stil accessible by astro.
You could also try copying everything out to your PC and then reformat the card and copying everything back.
If stil don't work then start brand new by reformatting the card and reinstalling all your apps
i will try it man for sure but just for informations:
-say i have no sdcard in the device (sdcard is unmounted) should i be able to install from market or install from pc some apk?
if yes than the problem is not in the sdcard, if no than i have hope to do it.
P.S.: how can i format the sdcard if i cant access it as disk drive?
You can format from within Android, Settings -> SD Card & Phone Storage -> Unmount first then Format.
Have you got another SD card to try with?
-i formatted the sd card, insert it in DHD (doesnt work)
-i replaced the sd card by another one (doesnt work)
-reinsert the new sd card and reboot (now problem is fixed)
-now back to the original sd card (and yes the problem is fixed)
what happened i dont know, why it's fixed i dont know, it's like a sudden problem and sudden fix, if anyone have any idea of what happened plz enlight us for future or similar issues.
Can anyone tell me why when I connect in Media Transfer Mode, my SD Card reads as blank in Windows. Windows detects the phone AND the memory card but it is blank. You can create folder, files etc on the blank card but they dissapear also.
However, if you connect the phone in Mass Storage Mode or remove the card and plug it into PC, everything works fine. The card also works fine in the phone.
Windows 7. 16GB Card that came with the Play.
ps. the card data usage is reading as correct even though I can't see anything on it in Media Transfer Mode.
reinstall pc companion check my thread about mtp app it should explain everything on how to bring back everything
The blank problem is because the driver are not correctly installed.
Ok, thankyou.
Weird, followed your excellent thread and done a reinstall but still blank.
yeah weird... you are sure that everything is available on mass storage mode ?
if it's the case then maybe your data are hidden on the device...
Check if there is folder without a dot at the start of the name (non hidden folder)
put new files and see what happen
Run a chkdisk on your SDcard with windows on mass storage mode
get andexplorer and check if everything is available through this app
windows might be infected by a virus that put your SD in a weird state
do a virus check...
Last if nothing above works: media transfer mode on your xplay> go to printer and other device on PC > right click > properties > hardware tab > properties > driver > uninstall driver > follow mtp app guide again to reinstall the driver
after that report back here
kenshindono said:
yeah weird... you are sure that everything is available on mass storage mode ?
Click to expand...
Click to collapse
Yep, all there. Phone is also detected fine in Media Transfer Mode in PC Companion (as R800).
Will do the rest when I get a moment, thanks for the help.
kenshindono said:
Check if there is folder without a dot at the start of the name (non hidden folder)
put new files and see what happen
- I did this in Mass Storage mode and it works normally.
Run a chkdisk on your SDcard with windows on mass storage mode
get andexplorer and check if everything is available through this app
[
- Done, it is fine. I used Astro and all is there.
windows might be infected by a virus that put your SD in a weird state
do a virus check...
- Clean.
Last if nothing above works: media transfer mode on your xplay> go to printer and other device on PC > right click > properties > hardware tab > properties > driver > uninstall driver > follow mtp app guide again to reinstall the driver
after that report back here
- Done this, the driver reinstalled but still blank SD card in Media Transfer Mode.
Click to expand...
Click to collapse
I'm doomed to use Mass Storage Mode!
Why doomed?
You want to get files from your PC or laptop to your Play, right?
That's what mass storage mode is for. That's what I use.
The only time I need to be in media transfer mode is to communicate with the Play with adb, having nothing to do with the SD card.
What exactly do you want here??
Maybe he didn't figure out how to mount the sd card to after choosing mass storage mode.
Remember you need to mount SD for accessing the file on the computer after setting mass storage mode
Ok, I guess it is not that big of a deal. Was just curious to getting it working as it should. It's not really gonna impact me.
Thanks for all your help kenshindono, your info and posts are very helpful.
Unlike DeadlyDazza who seems continuously rude and obnoxious.
Not really, i could understand if you had a crippling problem which prevented you from connecting your device for transfers.
But that's what mass storage mode is for, as far as I know, media transfer mode is for pushing with adb & using SE's media transfer PC software.
If I simply wipe dalvick and cache and flash new version of same developers (SACS) rom, will I lose anything like pics and downloads that are stored on the device?
Normally no you won't lose your pics and downloads if you just wipe cache and delvik cache only.
But you shouldn't take the risk. Make a backup of your own data.
anees02 said:
Normally no you won't lose your pics and downloads if you just wipe cache and delvik cache only.
But you shouldn't take the risk. Make a backup of your own data.
Click to expand...
Click to collapse
great thanks, what type of backup, using what? titanium? does a nand backup store EVERYTHING on the device, like the pics and downloads im referring to, or what exactly does a nand backup save? the whole reason I ask is because my piece of sheet Samsung galaxy 4 refuses to USB connect to my dell xps 15 (9530), a new machine. ive had dell, Samsung, and best buy all unable to figure it out..the phone just loops through saying "connected" then immediately disconnects, so I have no easy way to transfers all the files on the device itself to my computer....but the phone connects fine to my 10 year old inspiron...but the transfer speed is stone-age...
You can even copy all your personal files to external SD card then use any SD card reader to move it to your pc or laptop.
About your Samsung device not recognized... Then make sure of 2 things
1) That your usb cable is fine (may use another one)
2) uninstal Samsung drivers from device manager on pc then download the latest version of drivers (or you can uninstall Samsung kies and reinstalling the latest version of it)
Then retry connect the mobile phone to pc or laptop.
anees02 said:
You can even copy all your personal files to external SD card then use any SD card reader to move it to your pc or laptop.
About your Samsung device not recognized... Then make sure of 2 things
1) That your usb cable is fine (may use another one)
2) uninstal Samsung drivers from device manager on pc then download the latest version of drivers (or you can uninstall Samsung kies and reinstalling the latest version of it)
Then retry connect the mobile phone to pc or laptop.
Click to expand...
Click to collapse
i will go in and delete the samsung drivers on pc, and reinstall. thanks!
in the meantime, id like to dirty flash this rom asap, cuz my gps is broke, and i need it working. how should i backup whats on the device so i dont lose pics/downloads, etc.?
thanks for taking the time to help out
I even had a situation once where I could only see that there was a problem with the drivers through device manager when the phone was plugged in. I want to say I had uninstalled the drivers but they did not uninstall cleanly. I had to have the phone plugged into USB, right clicked on the driver, clicked uninstall/delete and unplugged the phone while the the driver uninstalled so the PC did not recognize it and start trying to install a new driver. Reboot download drivers and plug the phone in to install drivers.
dyandell said:
I even had a situation once where I could only see that there was a problem with the drivers through device manager when the phone was plugged in. I want to say I had uninstalled the drivers but they did not uninstall cleanly. I had to have the phone plugged into USB, right clicked on the driver, clicked uninstall/delete and unplugged the phone while the the driver uninstalled so the PC did not recognize it and start trying to install a new driver. Reboot download drivers and plug the phone in to install drivers.
Click to expand...
Click to collapse
my problem is i cant even get the phone connected to computer...it connects and disconnects in an endless loop
TrickyD76 said:
i will go in and delete the samsung drivers on pc, and reinstall. thanks!
in the meantime, id like to dirty flash this rom asap, cuz my gps is broke, and i need it working. how should i backup whats on the device so i dont lose pics/downloads, etc.?
thanks for taking the time to help out
Click to expand...
Click to collapse
As i said you can easily copy your pics and downloads to your external SD card then transfer all to your pc. By using sd card reader.
Then make dirty flash as you want or even go to a clean install.
About your apps and settings and their data you can use titanium backup.
But for pics and downloads you don't have to use titanium... Just copy and paste.
anees02 said:
As i said you can easily copy your pics and downloads to your external SD card then transfer all to your pc. By using sd card reader.
Then make dirty flash as you want or even go to a clean install.
About your apps and settings and their data you can use titanium backup.
But for pics and downloads you don't have to use titanium... Just copy and paste.
Click to expand...
Click to collapse
so you are saying i will lose my pics that are on the device, not on the sd card? i have nothing to externally connect the phone to. thats my issue.
I think you will not lose any thing but you have to make a backup if anything goes wrong.
If you have external card on your mobile phone then copy to your external card.
If you haven't then you can copy your pics and downloads wireless by using wifi if you have wifi router via airdroid app.
If you make a Nandroid backup in CWM or whatever recovery, Ti Backup is good at getting all of your data our that way as well. Once you have it, you can simply restore it, or if you have the pro version, create a flashable update.zip file that you can flash in recovery.
I've bounced back and forth between different ROM's with clean installs (wiping data and everything) and I've never lost anything on the internal SD. You can backup to be safe, but I don't typically worry about it.
BTW an app you can use to help is called AirDroid from the Play Store. It requires no USB connection, just WiFi and you can transfer just like if you were connected via USB.
Even if u did a full wipe u dont lose pics or music... Its on sd card partition. Ud only lose apps.. Ud have to wipe sd card completely to do that. Dl the superwipe flashable zip.. Flash that then rom then gapps after titaniuming ur apps