Database Users

Files on SD card without restarting

Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!

Wifi sync is your friend

lamajstro said:
Hi at all,
everytime I put files on the sd card, I have to reboot Android because without ES File Explorer won't show the new files I put on the memory card.
Even "Refresh" in ES File Explorer doesn't helo. Is there any other way?
Thanks!
Click to expand...
Click to collapse
This is a well documented problem. I think it's to do with the way that android sees the SD card with booting from it but don't quote me on that. As far as I know, the best ways round it are:
1. Use dropbox. Free 2gb account and can be very useful.
2. FTP. This is my personal favourite. SwiFTP is a free FTP server for android and there are many free ftp clients for PC/Mac/Linux available. I use FileZilla (opensource ftp client).
3. I believe that if you unmount your SD card before copying files over, then remount however I don't find it particularly successful.
There are other ways like shared folders, email files etc but the top 2 above are the best for me. I use dropbox for small files and one-offs or if I'm copying a lot of stuff and don't want to reboot to winmo, then FTP.
It's also worth noting that if you are a windows user then winamp can sync music over wifi providing you install the winamp android client. However both winamp for windows and android are free.
Hope this helps..
enjoy

Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...

I use MDJ Froyo HD 4.6, and there are practically no problems when using mass storage option... After unplugging the files are on the SD card... Only sometimes have to reboot, but not very often...

Why so complicated? Use "Multi Mount SD Card" (it´s free) to connect to PC and you will see new files without rebooting.

lamajstro said:
Ok, thank you. But that's bad.
The problem is not only that I want to put files through USB on it, it happens also when I use CurrentWidget for example that wants to create a log file on the sd card. Hmm...
Click to expand...
Click to collapse
If you're now saying that applications are unable to create files on the SD then there is something wrong with your card. I'd recommend copying everything off it and reformatting it (use disk management to format it, and use the largest cluster size available).

Some builds suffer from this problem and some don't.
Im using HD2ONE 0.3.6 and it's working fine. File explorer detects the new files after transferring via USB Cable
I love this build paired up with the CM6.1.1 Gingerbread Theme

kashifsiddique said:
Some builds suffer from this problem and some don't.
Click to expand...
Click to collapse
I've heard many people complain about not being able to see files after copying them across, but I've never heard anyone say that an app could not make a file on the sd card.

I am having the same exact problem. I was transferring files from this PC to my phone and everything was going fine (it refreshes right away after disconnect) then suddenly, my SD Card got corrupted and I was forced to reformat. I used the same ROM (Darkstone's SUPERAM FROYO) and after that, it won't sync anymore. I even tried removing it and using the HD2ONE (mentioned above) ROM and it was the same. I went home, copied everything from my SD backup from the other PC and same symptoms.
I thought I was missing a sync app or something but no. I looked into each of the folders I copied and most of them are blank.
I hope someone can save us!

I find it easiest and safest to just use ES Explorer to access the network shares and copy files wirelessly. The way our data.img is mounted, giving the pc full access to the sdcard is just not a good move. There was good reason when you connected to windows' sync software it disables your phone from accessing the card.
Even though the hd2one build seems to handle it correctly I almost never do it anymore unless it's for big files. It saves the wear and tear on the usb port anyway.

I had that "problem" too, but for me it was easy to solve. Here is the whole procedure:
So, i want some files to put on my sdcard, i plug in the usb cable and select the option "use as a storage", dont check the "use allways" or "dont ask again" (or whatever this is called on your machine). Now the computer "see" the phone and i put my files on it. In this moment i cant browse the sdcard on my hd2, because its reserved for windows now, (thats why currentwidget cant write onto it, same if you have a wallpaper in some "wallpaper" folder on sd).
Now, when i am done, usually i unplug the usb cable for some seconds and then i plug it in again and choose the option "charge only" and the sdcard gets mounted in android like it should and all my new imported files are visible.
Its the same on WinMo, if you choose there the "HDD" option, you cant browse the sdcard on the mobile. Only if you choose "use active sync"(slower) you are able to browse the sdcard.
cheers
ps: the quickest way for me now is to use wifi and shared folders

Noob Needs Unmount/Mount Info

I need some guidance re: unmounting/mounting my SD card from Windows. When I attach my phone to my PC I see a message "USB debugging connected" and "Disk drive", in that order. "Autoplay" opens on my PC showing the card letter. "Open folder to view files" gives me access to the files on the card. Once I've completed adding/removing files I have been right-clicking on the SD card in the list shown in "Computer" and choosing "Eject". Can I then unplug the USB cable, or should I change the "Connect to PC" setting on my phone to "Charge only", instead of "Disk drive"? OR is there another unmount step I should take (The unmount/mount concept is confusing to me). When I choose "Charge Only", I get a message on the phone "Preparing SD card".
Thanks in advance.
-Bob-

not sure what you are asking, i just pull the usb out when i no longer need it hooked to the pc

Richy99 said:
not sure what you are asking, i just pull the usb out when i no longer need it hooked to the pc
Click to expand...
Click to collapse
Really? I thought any time you wanted to unplug the phone from your pc you had to either right-click and "Eject" or "Safely Remove" (WAS asking which) and then in addition deal with the "Disk drive" setting on the phone. Am I totally misinterpreting things? I have been running mdeejay's MDJ FroyoHD 2.2.1 (since removed from this forum) since December without a glitch. HOWEVER, every other version I've tried, including the newest GB versions have crashed and burned as soon as I started adding music and photos via my desktop (usually within 24-48 hours). Trying to figure out what's going on with these builds. Initially thought that my new SD card (16GB, class 10) was too fast. Then tried an 8GB class 2; same issues. So, I figured this mounting, ejecting stuff was damaging the data.
More confused than ever.
-Bob-

I also just pull USB out without "safely ejecting". If you suspect that your problems are due to files copying, maybe try to shutdown hd2, pull off sd card and copy files with card reader.

adecostres said:
I also just pull USB out without "safely ejecting". If you suspect that your problems are due to files copying, maybe try to shutdown hd2, pull off sd card and copy files with card reader.
Click to expand...
Click to collapse
That would generally work. However, I use iSyncr to transfer iTunes music to the phone. On the initial transfer (about 1000 songs) it is impractical to use iSyncrWiFi (over-the-air) to do the transfer (too slow). So, at least in that instance I need to connect the phone.
Since I have your attention , can you explain what the unmount/mount discussions are all about?
Thanks again.
-Bob-

[Q] Sideloading/accessing folders in SD

I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).

Are you connecting the nook via USB or putting the SD card in your computer directly?
Sent from my NookColor using Tapatalk

The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.

You need to connect through the nook
Sent from my LG Optimus V using Tapatalk

Littlewhat said:
The card is placed in a usb card reader (or a usd card reader), either one sees the files on the PC, but it will not find it on the nook. Even when I create a folder on the nook and move the disk over and copy a file into the new folder I can't see it on the nook.
Click to expand...
Click to collapse
This is because the partition the computer sees is the boot partition... to access it in the nook... either in terminal or adb shell:
1. mkdir /sdcard/boot
2. mount /dev/block/mmcblk1p1 /sdcard/boot/
the items on the boot partition of the SD (including the folders and apks you put there) will be visible as /sdcard/boot
Pretty sure you'd have found it in the VG SASD thread and a few others... since I have posted this several times.

Thanks for the response. I'm not real familiar with ADB so I tried it with terminal and was able to create a directory but mounting gave me a 'permission denied' message.
(Sorry if this is old info, I've spent the morning combing the SASD thread and haven't found it yet, just too much info, thanks for taking the time to help some of us who are slower learners!)
Edit: learning slowly, used su to get into superuser (#) and made directory, but when I try to mount it says not found.

Littlewhat said:
I have built an SD bootable CM7 card as described by verygreen, but when I try to create folders on that drive from my PC (filled with APK files) I can't see them on the Nook. I have no problem doing this on my rooted emmc Nook, but when I boot to an SD card (that I am setting up for my daughter's Nook) I can't access any other folders/files.
What am I doing wrong? (The box is checked allowing Unknown Sources and I am currently running 177).
Click to expand...
Click to collapse
If you asked this question 2 weeks ago, I might able to give you the exact answer but since I wiped out the uSD CM7, I can't remember correctly what would happen.
However, based on my experience (+/- my memory loss), what you describe is all correct and that's what it is. Odd? Maybe, but don't panic.
Let's go slowly
when I try to create folders on that drive from my PC
Click to expand...
Click to collapse
you meant you created a folder in the "boot" partition on the uSD card?
a. if so, it's not recommended. Using the left over FAT32 partition instead
b. if so, try to use Root Folder app (it's a paid app) to access root folder (boot partition) directly on the NOOK. If you see the folder you created earlier, move it to the eMMC storage.
c. if not, pls tell us more

Yes, the SD card was accessed on my PC thru a USB adapter and a folder called 'APKs' was created in the boot sector. (I have also tried just adding the files into one of the other folders, but anything I add is invisible to the Nook).
So if I need to create a folder in other than the boot sector, I would need to use something like Easeus Partition Master to make that sector active and then create the folder and add appropriate files? (When I rooted my Nook directly to emmc it sure seemed a lot easier to access folders created by my PC.)
(Thanks again for all your help.)

That's much clearer, m8
Now, I think it's easier to get straighten.
1. From PC, using SD slot or usb-sd adapter, move (remove) the "APKs" folder off your NC to your PC, save it there, then eject the uSD off PC.
2. Insert the uSD into the NC and turn it on, make sure it boots into CM7 properly.
3. Wait until it completely load. Now using usb cable to connect the NC and the PC.
4. Watch the notification status bar on the NC, tap on it then turn on usb mass storage.
5. PC should recognize the NC and ready for use.
6. Move your "APKs" folder from PC into your uSD (it would probably named as CM7SDCARD)
Update: on item 6, I prefer to move the folder to the eMMC storage. I'm not 110% sure if the NC see "it" (it means the left-over FAT32 partition on the uSD card) or not, but I do believe, 99% it will.

Deleted folder on SD card (from PC) and verified reboot ok.
Connected USB cable to PC then to Nook, no notification bar comes up, but battery icon shows charging as well as the lighted n on the cable.
Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Still no recognition from the PC that anything is connected.
Edit: I am using my rooted Nook to build this SD card for my daughter's new unrooted Nook and when I plug the rooted Nook into the PC I don't get any verification from the PC on it either. No change on the Nook either, just the charging light and icon indicator.

Tried to use Nook Tweaks to begin USB connection (both boxes checked).
Click to expand...
Click to collapse
I don't have the NC with me now so I don't know what "both boxes" are and need to be checked or not.

The USB Settings from Nook Tweaks has a "USB Host Mode" (to enable host mode to connect peripherals) and an "External VBus" (to allow charging and hosting).
Both boxes were checked.
I've read that some of these issues can be caused by a faulty cable. If so, are there other alternatives to connecting thru the cable to open this up.
I have also tried the MiniTool partition program but I have not been successful in getting the active partition to 'stick' . (It immediately reverts back to the root being active after I apply the changes.)

You definitely have to UNCHECK the "USB Host Mode".
I'm not so sure with the "External VBus" status but suggest leave it by default.

With nothing checked in the Nook Tweaks section, USB cable connected to the Nook and then the PC, there is no recognition or acknowledgment that the Nook is there from the PC. (This is true whether I use my rooted version or try after booting to the sd card.)
If it is a cable problem, I will need to replace that, but aren't there other ways to make the sd card usable?
I've tried making the 4th partition action using Minitool and also Easeus but it didn't work. (Minitool just reverts back to boot partition active immediately after I apply the changes.)

Slow down, MiniTool and partitioning have nothing to do with this. Don't make more mess.
a. when plugging NC to PC, do you see any indication on the NC's status bar? like usb debugging?
b. when plugging NC to PC, do you see any indication on the PC (running Windows)? like removable drive?

There is no indication on the PC of any new connection.
The only indication on the Nook is the lighted n at the end of the cable and the recharging icon in the status bar.
Edit: the reason I was providing info on the MiniTools experience I was having is because my original question was how to access a folder (and files) created on my sd-bootable disk on my PC but the Nook can't see it. One way to accomplish this is to write the folder/apks directly to the Nook thru the USB cable. Other alternatives are to use windows to access it on my PC but I need to be able to access the 4th partition (if my reading of the various posts is correct). MiniTools and Easeus are two options that allow you to activate the 4th partition but it has not worked for my yet.
The USB cable connection problem appears to be there whether I boot to emmc or to sd.
Edit: I was able to find a non-nook cable (for my Blackberry) and using it my Nook recognizes when I connect to the PC and executes the USB Mass Storage Utility which allows me to turn USB storage on/off. Unfortunately the PC doesn't add any new logical drives in My Computer. The device manager shows 2 B&N Ereader Disk USB devices but with the yellow ! by them.

The 4th partition you mentioned about should be taken care during the installation, using verygreen's instructions, if you do correctly. There is ABSOLUTELY no need to mess around with MiniTool or the a-like.
Another question, have you turn on the USB Debugging feature? (I don't remember where, NC not with me now). If it not, check it box, try to plug in PC using usb cable again. I expect at least the usb debugging indicator will lit up.

I checked the debug feature (part of settings/applications/development/) and it was not checked. I checked it and now I get the robot icon (USB debugging conntected) and the USB icon to toggle storage on/off. Still nothing in My Computer and the drives shown in device manager are still yellow ! .
The device manager says "This device cannot start. (Code 10)"

I know it would be too early to say but I gonna to say anyway "congratulation".
When you see those icons on the NC status bar, it's 99% that it would work.
Now, back to the reality.
1. Connect usb cable between NC and PC running Windows
2. As you can see those icons, tap on the status bar to bring up then tap on "USB Mass Storage" (or something like "connect to computer for file/folder transfer, NOT the debugging). Read the warning then tap to enable USB connection
3. Now, pay attention on the PC, if it goes smoothly as expect, by now, you now can access both storages (eMMC and left-over of the uSD card) from PC. If so, move your "APKs" folder over.
I wish you luck

1- cable connected, icons on nook show up
2- tapping on status bar gives access to USB Mass Storage utility and option to turn on/off USB storage - with USB storage set to 'on' there is no recognition on the PC
Device manager shows two entries under disk drives for B&N Ebook Disk USB device but both are tagged with yellow ! (which a right click shows "This device cannot start. Code 10")
Is there something I need to do to download a usable driver for this?
(OBTW thank you for your help and patience)
Edit: within device manager I uninstalled the two drives (while the nook was still connected and USB active) and then had it search for new hardware. This time it loaded the drivers and NO yellow ! . At that point the PC recognized the drives and I have been able to create a folder that is accessible by the Nook and the PC. Thank you for help in this.
I have also contacted B&N and have a replacement cable on the way (which seemed to be a large part of my problems). Thanks Votinh for sticking with me while I got this resolved.

Fryo I800 installation help!

Ok So I am here because I've posted in other places in these forums with no replies yet, So it would be better to create a thread specific to my problem.
I have an Omnia 2, thinking of acquiring the Fryo 2.2 OS, not specific about wether I want what version but here are the problems I come across before being able to install it.
1- plugging in my phone under Settings -> My storage will not show my storage on my computer, having the external SD option will show my 16GB SD card.
2- Backing up. How do I back up my storage if I can't see it on my computer? When I turn on active sync a blank storage appears other than my SD card (assuming its the internal storage) but the size seems rather small (167MB). I've been reading peoples' posts and I'm supposed to have around 2GB I believe, and either way the files I'm trying to put inside for the android OS don't seem to fit there.
3- Partitions? How can I set those up for both the internal and external storage? Is there a program or feature to do so? My SD card under properties says FAT-32 so I'm not sure on how to do it IF I need to.
4- Using a W7 computer, so that knocks off any ubuntu installations, and also link is broken for Almars Beta 1 file that I was thinking of using for an SD installation.
Any help would be appreciated, I've had this phone since 2009 and I'm really hoping I can come across some help to make it work since I do want to keep this phone for a bit longer before I spend more money on a different cellphone!
Thank you!

Try out the new CyanogenMod from the link below.
http://windows.modaco.com/topic/346446-cyanogenmod-beta1-omnia-2-updated-02122011/
It has the SD Card auto installer, try it..
Back up data on your SD card first and then format your SD card within the phone and then use auto installer to install it.
As you said your computer wont detect the My Storage, try the steps below..
Transfer your data from My Storage to external SD Card, then connect your phone to computer using My Storage mode in settings.
Download Mini Tool partition wizard and format your My Storage (Mini tool partition will be able to see your My Storage even though your computer doesn't).
After format, your computer should be able to detect My Storage.
Now copy the downloaded android files to My Storage and run the auto installer as instructed in the ReadMe file inside the download package.
PS: Don't forget to backup the data on SD Card to your computer
Hope this helps

Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....

nobody can help me in regards to this? well then I guess a new cellphone is in order
grrrrr I should've gone with a iphone 3G or BB 9700 at the time instead...

ClaudioPerez said:
Ok so what you meant by taking things from my storage is going to file explorer and basically copying everything from the "my device" to the SD card?
Just want to make sure because if it doesent work then I haven't gotten anything backed up right.
Went to file explorer -> copied everything in the top folder which is application date, connMgr, doc and setttings, program files etc. is this all thats needed basically?
Thanks
P.S some of the things I tried taking like global.txt or exe couldn't be copied because of violations or some weird error, is it alright not to have those?
Update: My storage is still not revealed by the mini tool partition program, went under usb settings -> my storage and refreshed disk information, nothing shows up ugh it might be impossible for me to do this after all....
Click to expand...
Click to collapse
I guess you will have to reflash the ROM again since your problem seems to be unsolvable. My suggestions is to flash a stock 6.5.3 ROM before you transfer the auto SD installer.

[Q]Transferring files on cm9/10?

I have been trying to search the forum but having no luck. I switched from cm7 to cm10 recently and I am looking for a way app/utility whatever to have my sd card mount on my pc when I plug in usb so I can transfer files to my storage partition. I was using USB Mass Storage Watcher app(I think it was called) before, but it doesn't like cm10 very much. If there is no way to see usb connection from android to pc, what would be the next best option?

Hedgerow said:
I have been trying to search the forum but having no luck. I switched from cm7 to cm10 recently and I am looking for a way app/utility whatever to have my sd card mount on my pc when I plug in usb so I can transfer files to my storage partition. I was using USB Mass Storage Watcher app(I think it was called) before, but it doesn't like cm10 very much. If there is no way to see usb connection from android to pc, what would be the next best option?
Click to expand...
Click to collapse
That setting is built into CM10. Go to storage, then hit menu and USB configuration pops up. Select that. Select mass storage and back out. Now when you connect to PC both emmc and sdcard should show up as disk drives. The only app that I might use with that is my modified NookColorUMS app that I modified to work on CM9. It also works on CM10. Get it on my tips thread linked in my signature. And read about it in the second post in that thread. It allows you to mount any partition you want with UMS.

You might also look into using one of the transfer-over-wifi apps to get your data files onto Nook, I use WifiFileExplorer to this effect and never hassle with USB cords/connexions. Quick and sees everything.

Anniraff said:
You might also look into using one of the transfer-over-wifi apps to get your data files onto Nook, I use WifiFileExplorer to this effect and never hassle with USB cords/connexions. Quick and sees everything.
Click to expand...
Click to collapse
Love Wifi File Explorer Pro. I haven't taken an sd card out of my devices in months.

Thanks
Beautiful, I didn't think to hit menu after I was in the storage settings. I'll check out the wifi explorer too. Thank you guys!