Before I state my problem, I'd like to say how I used my phone. I never rooted it, I never downloaded any apps that I didn't trust and I always kept a good maintenance on my phone. I do have a 16 gb micro sd on the phone, different from what the manufacturer gave which was a 8 gb micro sd.
One day, I woke up and noticed my phones alarm didn't go off, it was just stuck on the bootscreen where it said mytouch 4g. I tried letting the battery drain and recharging it and repeating that a few times and nothing happened. I held my phones volume down and press the power button and pressed recovery and the hard reset option to no avail. I found out I was missing this img.zip file so I formatted my 16gb microsd and put the zip in the root. I pressed the down volume and power again and it begin loading the zip and it asked me to start the update by pressing the up volume, which I did. Now this is what shows up on my phone.
Parsing...[SD ZIP]
[1]BOOTLOADER - FAIL-PU
[2]BOOT - FAIL-PU
[3]RECOVER - FAIL-PU
[4]SYSTEM - FAIL-PU
[5]USERDATA - FAIL-PU
[6]SPLASH1 - FAIL-PU
[7]TP
[8]TP - BYPASSED
[9]RADIO_V2 - UPDATING
[10]RADIO_CUST
At number nine, I'm pretty sure the phone freezes because it's stayed like that for 30 minutes. Is there anything I can do or is my phone done?
I don't know what it could be cause I only used the in market apps and used it for calling, I never rooted it and I always had it protected in my cover.
How many more people will ask this...
Fail-PU = phone dead. Completely dead, no chance of recovery whatsoever.
Seriously Jack? It is his first post and he never rooted his phone. If you do a search for fail PU all you get is returns that deal with rooting and flashing, so I don't know why his question upset you so much.
But yes, your phone is dead.
possible solution
this might work.... since you like your phone unrooted and it is stock.... your local t-mobile store has the update to the mt4g on an sd card.... take it to your local t-mobile store with your phone fully charged.... let them know your situation... let them do the update.... if it does not work.... they should set you up with a warranty replacement with gingerbread... cheers!
I just wanted to thank everyone for their help. I had noticed only one other thread saying just "you're done" about the fail-pu thing when I searched mytouch 4g fail-pu which is why I made a thread about my phone, I wasn't 100% sure if my phone was bricked or not. I'm going to go to tmobile tomorrow and ask them if they can repair it or get it replaced, if not, I'll try contacting HTC (I think that's the company that made the phone) and ask if they can do anything for me. Again, thanks for all the help =].
Your thread, together with another couple of threads, inspired me to make a troubleshooting guide for MT4G.
The guide is in Troubleshooting section in Glacier Wiki, link in my signature.
Question
so what exactly causes this because just had the same problem?
Chuck_McFly said:
so what exactly causes this because just had the same problem?
Click to expand...
Click to collapse
the cause of Fail-PU is because the eMMC chip has died, meaning you cannot write anything to the phone anymore. as of now, there is no way of fixing it. if you know adb and adb can see your device, look up the eMMC serial and it should turn out as M4G2DE.
twitpicdotcom/79n6vs
I got the same thing.
Same problem
I have same problem.
so what is the solution.? is it bricked ?
hey guys what is the real time solution for fail-pu problem on my touch 4g,
"phone is dead is not a solution".
Then we have no solution for you. It's a paperweight. Telling us the phone is dead is not a solution doesn't magically bring it back to life. If the eMMC fails, you have no access to the partitions in which the data resides that makes the phone useful. Sorry.
Sent from my HTC Glacier using xda app-developers app
Upgrade time? Warranty exchange? Or send it in to htc for repair...just make sure they can't tell you are rooted or you will pay more than what is worth
Related
What are the my options for bricked MyTouch3G phone which boot with Vodafone logo?
1. Indefinitely wait for technical solution to un-brick the phone.
2. Sell the parts
3. Confess to T-Mobile customer service and see if they will take it back with some repair fee.
4. HTC warranty service
5. Just call T-Mobile tech support regarding a red boot up screen.
What have done with your bricked phone (mytouch, magic or g1)?
Anyone try option 3 or 4 successfully?
Update 08/18/2009:
Success on Option 5:
I call T-mobile tech support regarding the red boot up screen issue, after talkingg to two helpdesk person, and try Home+Power a few times and tech support have determined they will replace the phone and since I'm in California within 30 days of purchased, I can go to T-Mobile store and get an exchange. The tech support put a note in the system to indicate exchange will need to be done. Today I walk into T-Mobile store and as usual after a long wait, they exchange the phone without question or even bother booting up the phone. I would recommend anyone with MyTouch brick follow the same procedure and do it as soon as possible. I hope they won't bill me later. T-Mobile customer service is great.
quick question Waacow, can you get into fastboot and/or recovery? Also, I saw in the other thread you said that you successfully switched to the 32A radio, did you revert back to the 32B radio before flashing the OTA Rom?
No I couldn't get into fastboot or recovery. (back button + power / menu + power / home + power). none of them works.
Regarding the 32B radio, after i successfully switch to 32A radio+ROM, I did NOT flash the ION radio first. I just flash the OTA Rom (which also has radio firmware - i would think it is a 32B radio) and I suspect that is the reason why it bricked. I should have follow the Daredevil instruction completely.
Captchunk said:
quick question Waacow, can you get into fastboot and/or recovery? Also, I saw in the other thread you said that you successfully switched to the 32A radio, did you revert back to the 32B radio before flashing the OTA Rom?
Click to expand...
Click to collapse
Update 1st post regarding success story on option 5
waacow said:
4. HTC warranty service
5. Just call T-Mobile tech support regarding a red boot up screen.
What have done with your bricked phone (mytouch, magic or g1)?
Anyone try option 3 or 4 successfully?
Click to expand...
Click to collapse
In Japan, I called HTC Japan, but they said they didn't handle carrier customized device.
So I should deal with Docomo, but also I should pay $50 for replacement.
I just bricked mine today, chatting with online support. They will replace it, its just a matter of if I can pick one up in store or not.
UPDATE: "_Amber G: The MyTouch is supported as an In-Store Exchange, but we cannot guarantee availability in the store. "
I bricked my phone and it was past the remorse period it would turn on but with the red Vodaphone splash screen so no way to cover that up. Luckily, I still kept my handset insurance on my phone. So I called Asurion, Paid the deductible for the phone and the next day I had a brand new phone and all. All i had to do was send back the phone its self not back or battery. So basically I have extra backing, battery, Case, Wall charger, Everything, Even the black my touch case it came in. Yeah, I paid for 2 phones but hey I don't have to worry about not having a spare battery on long trips I have one and that is the actual branded not some off brand and the spares are 50 bucks a pop.
So I lucked OUT so lucky, And I said I would not attempt to root my phone what happens 1 week after my replacement new root method.
And Yes I did successfully rooted my phone with the 1 Click method. Running CYAN 4.0.1 Rom. LOVE IT. I really want the hero rom but Im not sure I want to do the extra steps to do it.
Anyone else have an experience like mine?
I think i just bricked my MT3G. All i have is the green MY TOUCH screen.I can get the fast boot screen and recovery but no nandroid back up.Its gone.I believe sd card is corrupted.any help would be grateful or am i screwed
shaunprice1988 said:
I bricked my phone and it was past the remorse period it would turn on but with the red Vodaphone splash screen so no way to cover that up. Luckily, I still kept my handset insurance on my phone. So I called Asurion, Paid the deductible for the phone and the next day I had a brand new phone and all. All i had to do was send back the phone its self not back or battery. So basically I have extra backing, battery, Case, Wall charger, Everything, Even the black my touch case it came in. Yeah, I paid for 2 phones but hey I don't have to worry about not having a spare battery on long trips I have one and that is the actual branded not some off brand and the spares are 50 bucks a pop.
So I lucked OUT so lucky, And I said I would not attempt to root my phone what happens 1 week after my replacement new root method.
And Yes I did successfully rooted my phone with the 1 Click method. Running CYAN 4.0.1 Rom. LOVE IT. I really want the hero rom but Im not sure I want to do the extra steps to do it.
Anyone else have an experience like mine?
Click to expand...
Click to collapse
I had the same exact experience as you. I tried to root mine the goldcard way the day the method was posted online. My friend and co-worker was also rooting his myTouch at the same time. We both followed the same instructions but he succeded and i failed.
Once I had my hands on my new myTouch i refused to root it because I was too scared and my friend kept bugging me to root it since I got him to root his G1 after I did mine.
Yesterday my friend told me about the 1 click method and I'm also running cyan 4.0.1 rom
So I ended up paying for the full price of the myTouch but I have spare everything. I guess I got lucky too
selfkself said:
I think i just bricked my MT3G. All i have is the green MY TOUCH screen.I can get the fast boot screen and recovery but no nandroid back up.Its gone.I believe sd card is corrupted.any help would be grateful or am i screwed
Click to expand...
Click to collapse
Since you can get to fast boot and recovery you are not screwed. Look around the forums for help cause there are step by step instructions on how to recover from your situation.
selfkself said:
I think i just bricked my MT3G. All i have is the green MY TOUCH screen.I can get the fast boot screen and recovery but no nandroid back up.Its gone.I believe sd card is corrupted.any help would be grateful or am i screwed
Click to expand...
Click to collapse
if you can get to a fastboot screen, you can still save your phone. load up Amon_RA's recovery through fastboot and boot up to it.
(first of all, I didn't knew where else to post this topic to ask this, excuse me if it's posted somewhere wrong)
So I kinda gave up on my magic, R.i.P.
now i was wondering...
that if I take my phone back to the store... and that i shouldn't get a new one immediatly, bcuz they have to send it to htc facotry... how big is the chance they will know I rooted it and it didn't just mallfunction from its own?
or isn't it possible that they just throw in some new rom? They made it so it shouldn't be to hard to get that fixed...
anyone perhaps has experience with sending back his phone or going back to the store?
tell me what happened... did you get a new one, did you had to pay something to get it fixed or just bought a new phone...
all information is welcome either here on the board or by email first_dimension at hotmail dot com <-
thanks ahead guys...
greetings
a desperate dumazz belgian guy who ****ed up his phone badly
What has actually happened to your phone, can you describe the problem please, it may not have to go back to the repair center. Thanks
uhm, while flashing it, it fell down of my desk, battery got disconnected, ...
now i get my "proximus" (wich is my mobile provider) startup screen, wich doesn't go away
cant enter boot menu (by pressing menu + power on)
nor safe mode (home + power on)
cant even connect to my computer to flash a new rom or anything...
so it's completely bricked i been looking on the internet for days now tried every solution...
nada man...
nothing more than my startup screen...
(edit)
the only thing i can still do is like, when i hit the trackball and power on button it lights up a blue led...
but i read every magic does that even if not bricked...
I heard that someone thought they bricked their phone because they couldn't do anything with all the button combinations but when they tried fastboot it worked and unbricked their phone. I mean he didn't go into fastboot, he just plugged his phone in via usb and just tried fastboot.
I'm saying try fastboot. If that doesn't work then I'm sorry but you have to return it to get it fixed but since they can't get into anything I'm sure they won't know that it is bricked.
thanks for the reply m8, but i tried this already...
just sais waiting for device or sumthing...
i think i read that answer on some other board aswell that someone was lucky enuf to have that but not here, not in my case
bummer i guess...
My carrier offers insurance to replace a phone even if it was lost or stolen. If this was an option for you, I guess you would have already thought about reporting it "stolen," but I figured I'd mention it anyway.
Sorry to hear about your phone.
I bricked my mytouch and I just called T-mo customer service and they're sending me a replacement for free since it's still under warranty.
Hello all,
I have recently upgraded from my g1 to an HD2. HD2 is a great phone but still miss android . Anyways, today I wanted to get my g1 to work without a sim or data plan and was about to start working on it when my g1 screen dimmed to just the blacklight with a black screen. I turned it off and tried turning it back on but it just comes up with the backlight on a black screen. It does not even get to the G1 screen. I cannot get to recovery mode or any other mode for that matter. I have searched around but not found any real solution to this problem (if there is one). I am thinking my phone is bricked but have heard possibilities using ADB. I have never used ADB before and if anyone knows if this is a possible fix to my problem that would be great. It would be nice to know if it actually could fix my problem before looking into it and learning it all while finding out it has no chance of fixing my problem. I have tried using my sim card and a different sd card so those are not causing the problems.
So the background of what I am running on my g1. Right before I got my HD2 I was using Cyanogen version 4.2.14.1 with and ext 3. I had no problems with it until now. I got my HD2 a week ago and my g1 has been on about twice in that time without a sim card just for comparing purposes to the HD2. Then just today (about 2-3 days since I last turned it on) the screen just went black and I had my problems. I cannot return my phone because it has been over a year and I dont have insurance on the phone so these are not possibilities for me unfortunately. I also don't really want to get parts from other g1's and take apart and put my g1 back together. I am just looking for something with ADB or any other possible solution to the problem (if one exists).
Any help would be greatly appreciated!
I had this happen to me before. Apparently, it was a hardware GPU problem that would cause a boot loop because it couldn't draw anything on the screen. This happened on SuperD, AOSP, Cyanogen, and stock Donut.
If your problem is the same, you should be able to get into recovery, regardless of your ability to see what you're doing. Easy way of telling is to hit Camera+End on boot. If it doesn't vibrate, you're able to flash still. You may be able to get the screen back temporarily by either pulling the battery or letting the battery die and recharging.
Anyways, I ended up flashing the DREAIMG.nbh, and trying to upgrade back to 1.6 to remove traces of hacking. (Be careful if you have DangerSPL, you want to restore the default before flashing DREAIMG.nbh) I eventually got the screen working on 1.6, but it died again, so I sent it in to T-Mobile and got a replacement. I'm now using AOSP with no problems.
One small note, however, I did start having my problems using Cyanogen's mod. May want to bring it up with him?
Sorry if this sounds scatterbrained, it's a bit late and I should be asleep right now.
e:Just realized you said the warranty was void. You may be able to get something out of what I did, though? Good luck, in any case.
Thanks very much for the help even though it was really late. I did understand pretty much everything you said and I tried the camera plus power button and it didn't vibrate so it should mean I probably can flash things still. I have drained the battery and am charging it back up to see if that helped.
I have a friend who knows ADB so I am going to have him look at it to see if we can't get it working through there. Also the G1 screen has been popping up but then fading right when its about to change to the boot animation. So we will see how things go and I'll try a couple different things and report back if anything seems to work or open up more possibilities.
Thanks again for your information.
Ok, so my friend and I were going to flash a rom through fastboot. It was responding and such so we knew we were able to get it in there.
Anyone know what the command to flash a rom in fastboot is and if there are specific instructions to follow?
Any help would be greatly appreciated!
coolookoo said:
Ok, so my friend and I were going to flash a rom through fastboot. It was responding and such so we knew we were able to get it in there.
Anyone know what the command to flash a rom in fastboot is and if there are specific instructions to follow?
Any help would be greatly appreciated!
Click to expand...
Click to collapse
google it. i did and got about 100 links telling me how to do it. "unroot g1 with fastboot."
sorry i have the same problem, but my g1 is not rooted nor has it been flashed before, my friend messed it up somehow? wen i turn it on all there is is a blank highlighted black screen. What do yall suggest i should do
r3s-rt said:
google it. i did and got about 100 links telling me how to do it. "unroot g1 with fastboot."
Click to expand...
Click to collapse
First of all we are not trying to unroot the phone just flash another rom
Secondly we already tried your "fantastic" method of using google before coming to the forums
Ok I think I just bricked my G1
I was following the steps on theunlockr.com and was following the steps to the T like I always do.
The problem incurred after flashing the spl. I flashed the correct radio then ir rebooted and went back into recovery mode. Then I flashed the spl all seemed well home+back and never rebooted. It stayed on a black screen for over 30 mins. So I took out the battery and waited a few mins and put battery back in and same thing. Just a black screen nothing I can do. I have tried holding home+power and camera+power and back+power nothing. I am stuck have looked it up and this is the best forum I have found to post in.
Any input would be great.
thanks
nate
Hello XDA Community!
I made a post about this issue before, but have more details so hopefully someone can help me figure out this issue.
My phone even when unplugged from my PC continuously says USB Connected/ USB Debugging in the notification menu.
Also, when I try and reboot the phone, instead of booting even to the Vibrant logo screen, the loading circle continuously blinks on and off, without actually booting.
As I type this, I am not holding down the power button, and the loading circle is blinking on and off by itself....
I used to be able to turn the phone on into recovery mode in the past, but now when I try to reboot into recovery I get a big yellow picture that says "Downloading"
The only way the phone will turn on is if it is plugged in.
I am fairly certain that this reboot issue and the USB issue are correlated in some way.
Did anyone else have this issue with their phones? And if so, how did you solve it?
Another thing I have just discovered...
When the phone is on and idle, the USB Connection notification will constantly blink on and off, which is why I think the phone would do the same when trying to power on!
Is this a hardware issue or a software issue?
I have not flashed anything in a very long time before this issue started happening so I believe a restore is unnecessary .
Someone please help me! This is very annoying, not only do I have NO notification bar because of the constant USB Connection notification turning on and off, I cannot turn on my phone at all unless it is plugged in!
ACK!
Take it back
I carry the insurance, so personally if this was happening to me I would not even mess with it. It sounds like you have a genuine problem with the phone and it needs to be replaced.
If it is possible to do try a nandroid backup of your phone to make getting back to where you are on your new device easier. Then take your phone back to stock with the recovery image here -->
http://forum.xda-developers.com/showthread.php?t=734475 (Thank you justanothercrowd)
One you have a stock device see if you are still having the issue. If you are take it back as defective. Even if you don't have the insurance, that sounds like a factory defect and should be covered by the factory warranty. The insurance just makes the process easier and makes sure they just give you a swap out at the store rather than having to wait for repairs. It also covers things the warranty does not, such as screen breakage - which is the specific reason I carry the insurance.
Ah crap wish I had insurance.... Do I have to do that whole odin procedure or is there a one click un root procedure as well?
Sent from my SGH-T959 using XDA App
Nevermind i just read through that link you posted. So when i go to a t mobile store do i have to unroot or can i just hide my root applications until i get a new phone?
Sent from my SGH-T959 using XDA App
I actually have not had reason to go back to stock, or even use odin yet at this point. My only roms were .zip files that I flashed via clockwork recovery.
I would say that your best best it to just follow the instructions on justanothercrowd's thread very carefully and deliberately. You are already having issues with reboots and your USB port, so this is not the time to deviate into experiments.
So to cut you off and just answer you next three questions:
Q) Can I just . . .
A) No! Just follow the directions exactly.
Q) But can I . . .
A) No! Just follow the directions exactly.
Q) Do I have to . . .
A) Hey look, Just follow the damn directions exactly!
Sorry, I can't help much beyond that. You chose to modify your phone and risk that you would not have issues, just like the rest of us here. In your case you did have issues. Now you have to get it back to stock so they don't have any reason to claim you caused this or that your warranty is void. I hope all goes well and it works out for you. Let as know and keep us posted. Good luck.
Lo N Slo said:
Nevermind i just read through that link you posted. So when i go to a t mobile store do i have to unroot or can i just hide my root applications until i get a new phone?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
We must have been typing at the same time LOL.
There is a thread on unrooting, and basically it is just deleting a few things. After doing this you should not have any non-stock applications on the phone and there would be no reason to think it was rooted unless they went digging on the file system. Personally, I would delete those telltale files just in case, it looks a little suspicious to bring in a phone that looks like it has not been used since you bought it, but they have no proof you did anything and you can claim that you first did a factory reset to see if it would fix the problem.
Just want to keep this thread going, as I am having the exact same issue as the OP as of today. It happened out of the blue, and I haven't flashed anything new to my phone since JI6 was released, other than that, it's just a stock, rooted phone.
Hoping someone has an idea, but I will likely get it replaced under warranty, since the GPS has never worked either.
damnit damnit damnit I really wish I had warranty.
Random question about clockword mod recoveries.
If I were to do a backup right now, and save that file to my computer, could I restore that file later on a different phone after I root my replacement?
I don't have that many mods flashed, and I know all of the apps can be synced, but still it would be sooo convenient .
I believe that is how it works, so yes. It should be no different then when you clone a hard drive to put the image on multiple computers for easy distribution.
It is (just like the cloning metaphor) hardware specific. Just like I could not purchase a upgrade computer and expect a cloned image to work, don't expect to create a Vibrant backup and restore it on a Captivate.
That said, you should be able to restore your backup to new (identical) hardware.
By the way, what is the warranty on these? I thought it was a year for defects. I didn't think the Vibrant had been around long enough yet for anyone to be off warranty.
it should be a year, but there was also the option for a purchased warranty. I did not purchase a warranty, so I should be good on just my manufacturer's defect warranty
Being discussed here:
http://forum.xda-developers.com/showthread.php?t=817643
so my mytouch 4g wont turn on even with a different battery. i plug it it in and it gives me a flash on th screen but thats it. any suggestion without sending it in
Take it to a tmo store, they'll swap it.
I got it off of Craigslist I think it was previously tampered with
Sent from my HTC Desire using XDA App
so i was in the process of doing a custom splash screen last night. i went through all the instructions on how to push the custom splash through terminal. everything went how the instructions said, but once i reboot it my phone turned off and never came back on. it doesnt power on, boot into recovery, nothing! i put the phone to charge and the red light comes on on the top left but when i take it off the charger it stays on.
i been rooted for about a month now and i was running cm7 build 8 when this happened. i just want to see if anybody has any idea on what going on. i tired everything i can think of. taking out the battery and normally powering on and nothing. taking off the battery and volume down and power to boot into recovery and nothing. taking off the battery, sd card, sim, putting back the battery and doing both normal power on and to boot into recovery and nothing.
First of all you just hijacked the guys old dead thread and second it sound like you just bricked your phone. As there is boot animation and there is slash screen. Seems like you flashed wrong thing. If the screen don't even turn on its dead then.
Sent from my HTC Glacier
Don't flame the poor guy! He's got it bad enough as is! And he didn't flash the "wrong thing" there are several threads on flashing splash screens in this phone's forum. Cut the guy some slack. He knows it may be bricked, he's just hoping it's not. And he was hoping for someone to provide some possible help. Not be be given **** for not opening a new thread.
i thread jacked because the thread was old and didnt want to clutter by starting a new one when im having some what the same problem. but no i pushed the splash image. i had already flashed a boot animation a few day back. i had call of android running on my phone as a boot animation. i just want to know is theres other methods of reaching hboot or recovery.
First of all don't put words in my mouth as my post does not contain any flame, second when I said wrong thing I meant he may not have meet the requirement for the splash image if he did correctly then obviously he would have had it up and running. Best thing for him would be going back to the original thread where he downloaded the image and asking the OP and troubleshoot it but at this point its to late all he can do now is warn others.
But if his phone is not old lol he can social engineer and play the victim card and send it back to HTC but first would be trying TMo saying he didn't get the POST OTA as he had PRE OTA and when he try to install the OTA it went blank and act like he has no idea what is going on, as he simply just want the phone to work or he will cancel service and do acting best of his life.
i already know i probably super bricked it. becuase ive bricked it before but not like this. i was able to fix it very quickly before. its like if the phone just doesnt have a battery. im just going to wait to see if anybody else has any more input. if not ill head to the tmo store see what they can do.
BlackSHELF said:
But if his phone is not old lol he can social engineer and play the victim card and send it back to HTC but first would be trying TMo saying he didn't get the POST OTA as he had PRE OTA and when he try to install the OTA it went blank and act like he has no idea what is going on, as he simply just want the phone to work or he will cancel service and do acting best of his life.
Click to expand...
Click to collapse
I do apologize for using the word flame. It was too strong. But I get fired up when people criticize instead of offering insight. If you had posted the above paragraph first, I wouldn't have had any issues. This is good and viable option. Albeit a last resort, but much better than criticizing for thread jacking. And I am the OP of the thread that he's using and am doing EVERYTHING I can to help him figure out a way to get this resolved.
coupetastic-droid said:
i already know i probably super bricked it. becuase ive bricked it before but not like this. i was able to fix it very quickly before. its like if the phone just doesnt have a battery. im just going to wait to see if anybody else has any more input. if not ill head to the tmo store see what they can do.
Click to expand...
Click to collapse
ok, I just got caught up on your issue. I am going to do a little research and see if I can come up with anything to maybe help. Do you have adb set up? What recovery are you running?
Same thing happened to me, flashed a rom rebooted and the phone never turned on again.
thanx every one for trying to help. i tried everything i can think of and i could not get that phone to power on at all. it was completely dead. so i went to the tmo store by my pad and they gave me a brand new one. now i just need to gain s=off on this one which i cant do for some reason. i dont know why since it was fairly easy to gain s=off on my other mt4g. ill figure out though.
coupetastic-droid said:
thanx every one for trying to help. i tried everything i can think of and i could not get that phone to power on at all. it was completely dead. so i went to the tmo store by my pad and they gave me a brand new one. now i just need to gain s=off on this one which i cant do for some reason. i dont know why since it was fairly easy to gain s=off on my other mt4g. ill figure out though.
Click to expand...
Click to collapse
Don't know if you used this guide yet or not but I will post it anyway http://forum.xda-developers.com/showthread.php?t=858996
toby4059 said:
Don't know if you used this guide yet or not but I will post it anyway http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
I aready got s=off but thanx anyways.
Sent from my CM7 Glacier using XDA App
Hi.
I had the same problem on my htc glacier (mytouch 4g) which was turn it on, stuck on the htcwelcome screen, keep loading and then turn off automatically. My phone is rooted and cusome flashed to the new htc 3.0 sense when this happened, i did a back up and restore to the oem mytouch sense and now it is working just perfectly. So if your phone is rooted you might give it a shot and hope it will work again
i had same prob kinda
i flashed a rom was useing it for a week and today i went to use camera and while camera was loaded the screen shut off like not beining used it did the crt thing and all then it wouln't come out of it so i pulled battary after like 5 min of a lighted black screen and went to power phone back on and nothing like no batt.....
anyways what i was geting to is that i called tmoble and they said it sounded like a hardware problem if you can plug it in to wall or car charger and nothing.. when i plug it into a usb on pc i get
hsusbs or something so u all might want to look into that.
i have s mytouch 4g it wont boot
i rooted my mytouch 4g ussing gfree and then i installed sense 3.0 rom and it worked then force closed left me in bootloader then from there flasheed cm7 worked good for 15 days then said force closed again then never turned back on aghain now when i plug it back in it tells me cannot install drivver software and it recognizes it as qhsusb_dload any solutions or its a gonner contact me at [email protected]