Hello all,
I have recently upgraded from my g1 to an HD2. HD2 is a great phone but still miss android . Anyways, today I wanted to get my g1 to work without a sim or data plan and was about to start working on it when my g1 screen dimmed to just the blacklight with a black screen. I turned it off and tried turning it back on but it just comes up with the backlight on a black screen. It does not even get to the G1 screen. I cannot get to recovery mode or any other mode for that matter. I have searched around but not found any real solution to this problem (if there is one). I am thinking my phone is bricked but have heard possibilities using ADB. I have never used ADB before and if anyone knows if this is a possible fix to my problem that would be great. It would be nice to know if it actually could fix my problem before looking into it and learning it all while finding out it has no chance of fixing my problem. I have tried using my sim card and a different sd card so those are not causing the problems.
So the background of what I am running on my g1. Right before I got my HD2 I was using Cyanogen version 4.2.14.1 with and ext 3. I had no problems with it until now. I got my HD2 a week ago and my g1 has been on about twice in that time without a sim card just for comparing purposes to the HD2. Then just today (about 2-3 days since I last turned it on) the screen just went black and I had my problems. I cannot return my phone because it has been over a year and I dont have insurance on the phone so these are not possibilities for me unfortunately. I also don't really want to get parts from other g1's and take apart and put my g1 back together. I am just looking for something with ADB or any other possible solution to the problem (if one exists).
Any help would be greatly appreciated!
I had this happen to me before. Apparently, it was a hardware GPU problem that would cause a boot loop because it couldn't draw anything on the screen. This happened on SuperD, AOSP, Cyanogen, and stock Donut.
If your problem is the same, you should be able to get into recovery, regardless of your ability to see what you're doing. Easy way of telling is to hit Camera+End on boot. If it doesn't vibrate, you're able to flash still. You may be able to get the screen back temporarily by either pulling the battery or letting the battery die and recharging.
Anyways, I ended up flashing the DREAIMG.nbh, and trying to upgrade back to 1.6 to remove traces of hacking. (Be careful if you have DangerSPL, you want to restore the default before flashing DREAIMG.nbh) I eventually got the screen working on 1.6, but it died again, so I sent it in to T-Mobile and got a replacement. I'm now using AOSP with no problems.
One small note, however, I did start having my problems using Cyanogen's mod. May want to bring it up with him?
Sorry if this sounds scatterbrained, it's a bit late and I should be asleep right now.
e:Just realized you said the warranty was void. You may be able to get something out of what I did, though? Good luck, in any case.
Thanks very much for the help even though it was really late. I did understand pretty much everything you said and I tried the camera plus power button and it didn't vibrate so it should mean I probably can flash things still. I have drained the battery and am charging it back up to see if that helped.
I have a friend who knows ADB so I am going to have him look at it to see if we can't get it working through there. Also the G1 screen has been popping up but then fading right when its about to change to the boot animation. So we will see how things go and I'll try a couple different things and report back if anything seems to work or open up more possibilities.
Thanks again for your information.
Ok, so my friend and I were going to flash a rom through fastboot. It was responding and such so we knew we were able to get it in there.
Anyone know what the command to flash a rom in fastboot is and if there are specific instructions to follow?
Any help would be greatly appreciated!
coolookoo said:
Ok, so my friend and I were going to flash a rom through fastboot. It was responding and such so we knew we were able to get it in there.
Anyone know what the command to flash a rom in fastboot is and if there are specific instructions to follow?
Any help would be greatly appreciated!
Click to expand...
Click to collapse
google it. i did and got about 100 links telling me how to do it. "unroot g1 with fastboot."
sorry i have the same problem, but my g1 is not rooted nor has it been flashed before, my friend messed it up somehow? wen i turn it on all there is is a blank highlighted black screen. What do yall suggest i should do
r3s-rt said:
google it. i did and got about 100 links telling me how to do it. "unroot g1 with fastboot."
Click to expand...
Click to collapse
First of all we are not trying to unroot the phone just flash another rom
Secondly we already tried your "fantastic" method of using google before coming to the forums
Ok I think I just bricked my G1
I was following the steps on theunlockr.com and was following the steps to the T like I always do.
The problem incurred after flashing the spl. I flashed the correct radio then ir rebooted and went back into recovery mode. Then I flashed the spl all seemed well home+back and never rebooted. It stayed on a black screen for over 30 mins. So I took out the battery and waited a few mins and put battery back in and same thing. Just a black screen nothing I can do. I have tried holding home+power and camera+power and back+power nothing. I am stuck have looked it up and this is the best forum I have found to post in.
Any input would be great.
thanks
nate
Related
Hey everyone, my hd2 died (original 1.48 rom), I already tried soft reset, hard reset, put out my battery, charge it and everyhting that came to my mind but when i turn it on it wont go further than the first htc image.
Is there anything i cant do or should i just take it back to the shop?
Thanks
I would take it back, even if you do fix it. You don't want a phone that may still have a underlying problem.
Htc HD2 BRICK Need HELP!!!!!!!
I flashed Duttys_Leo_Sense_2.5_5.2.23554.5.5.0_1.72_Multi-Lang_6.5.5_Radio_2.07.51.22.2_V1.2_WWE into tmobile htc hd2 cause i was [email protected]$kin goin Rom happy and didnt double check its compatibility and my screen went blank black, cant power on, cant go into bootloader, and cant hard reset but when i plug it in to my computer it recognizes it as a device without a driver i saw it in the device manager on windows 7 ulitmate. CAN I SAVE MY HTC HD2??
I KILL my htc hd2 (BRICKED)
I used HSPL2_1024_RUN.exe i flashed like 5 roms within 24hrs i was trying them out and this one made killed my hd2.
for those stuck on the htc boot image
take off the back cover of the phone and press the little red button, this will restart the phone
AS SOON AS you press it, press and hold the volume down button this will bring you to the bootloader
connect the phone via usb to your computer and flash a different radio rom (look first which are compatible with your rom)
if this doesnt work, using the same method flash back to your original rom.
hpg said:
I flashed Duttys_Leo_Sense_2.5_5.2.23554.5.5.0_1.72_Multi-Lang_6.5.5_Radio_2.07.51.22.2_V1.2_WWE into tmobile htc hd2 cause i was [email protected]$kin goin Rom happy and didnt double check its compatibility and my screen went blank black, cant power on, cant go into bootloader, and cant hard reset but when i plug it in to my computer it recognizes it as a device without a driver i saw it in the device manager on windows 7 ulitmate. CAN I SAVE MY HTC HD2??
Click to expand...
Click to collapse
for tmous with 1gb rom NEVER flash a radio with .51. in the code.
still haven't seen anyone recover from this. if anyone has please let me know.
Damn it captain!!!!!!
I just got it on the 24th shhhhhhhh....... ummm i just will take it to TMOBILE i hope i can get an other one, they may not have one in stock or they WONT give me another. i will see as soon as the store opens.
Sorry to hear about people's problems. Just remember if you have TMobile
USA there is NOT a way to flash another rom onto the phone..Just give it time the wonderful folks here are working on it. If your still in your 14 day grace period just return the phone to the store and play dumb. You might
have to wait for another phone since apparently they did not anticipate
how many people wanted this phone and sold out quickly. I know I was there
at 6:30 and the second in line and they only had 5!
Anyway, the most important thing you can do here is DO a search!
I KILL my htc hd2 (BRICKED)
BUT I have flashed roms into Tmobiles htc hd2 like TOUCH_X_TREME_23549_TMOUS_2_30_5_49 among others and they worked! i was just try different ones and i PICKED and I BRICKED!!!!!!!!!!!
Damitu said:
Just remember if you have TMobile
USA there is NOT a way to flash another rom onto the phone..
Click to expand...
Click to collapse
sorry? sure about that? seems to me lots of people have successfully flashed their tmous hd2.
It only goes wrong if you
1 - flash a rom based on anything less than 2.10 rom
or
2 - flash a radio with ..51.. in the version number.
I KILL my htc hd2 (BRICKED)
When I take it back do you think tmobile can they tell if i flashed a rom?
hpg said:
When I take it back do you think tmobile can they tell if i flashed a rom?
Click to expand...
Click to collapse
possibly, however its worth a try, there are other people that have reported they got it exchanged. the worst theu can do is send you it back un fixed. They can't keep it and make you pay for the fix.
I KILL my htc hd2 (BRICKED) and the walk of SHAME!!!
Ok well thanks for your GREAT!!! input how can i add you to friends for future epic fail endeavours!!! i encounter.
hpg said:
Ok well thanks for your GREAT!!! input how can i add you to friends for future epic fail endeavours!!! i encounter.
Click to expand...
Click to collapse
hehe, i rarely bother accepting friend requests, this isnt a social networking site!
Just find any post be me, and either click my name or the green button next to my name to PM me.
Shamely going back to tmobile on wed
I went to tmobile last friday they tried to turn it on, pushing reset and taking out the battery so they put me on a list for this coming wed. I still got the bricked one with me they told me to bring it in for a trade. i have tried everything to turn it on but the screen remains BLACK. so i got a BLACK BRICK!!!
Any more ideas?
cgrec92 said:
for those stuck on the htc boot image
take off the back cover of the phone and press the little red button, this will restart the phone
I do not see a little red button under the back cover. I am in the US, just bought phone, slightly used of course, no warranty. It suddenly went dead this afternoon while charging, will sometimes try to power up but will just keep flashing that one screen "stick together" over and over.....
Tried another battery, same thing.
Click to expand...
Click to collapse
Mine is doing the same thing . . . in the US, the reset button is right next to the SD card slot, and it's yellow. Mine wouldn't come on Friday, and I started a web chat with Tmobile to see if they would exchange it, and then it just came back on. They said as long as the white sticker at the top of the battery compartment is still white (proving you didn't get it wet), then they will exchange it. It worked fine for me the rest of the weekend (AFTER I did a hard reset, and got it running great!!). This morning, I locked it while running MobiTV, then I couldn't unlock it, so I pulled the battery. That was 2 hours ago, and it still won't come on . . .
If it doesn't come on before I leave work, I'm taking it to Tmobile tonight!!
UPDATED 20 minutes later: Just came on . . . no rhyme or reason why?? Just started after MULTIPLE times of taking out and putting back battery, SIM, and SD card. Got the same error that I've been getting the last couple months on reboots (services.exe)?? When I did a CleanRAM, it free'd up 3.36MB . . . so SOMETHING was hung up, but nothing was running in the task manager??
Generally, few task managers show what's really going on with the phone's memory. Use an advanced task manager which will allow you to control the actual processes running on your device, Google for the names of those which seem to cause mischief and terminate them (if possible) or try to find a solution.
hpg said:
When I take it back do you think tmobile can they tell if i flashed a rom?
Click to expand...
Click to collapse
Hey I am also Tmobile User and I have flashed a few ROMS luckily I have not Bricked my phone (knock on wood.) I was just wondering how your return went? I have insurance on mine and figured I would just take it back if that happened. I just didn't know if that would work? Did you ever get a new one
Another update . . . used my phone all afternoon, and tried to charge it, and it wouldn't charge??? Luckily, my husband has the same phone, so I checked his with the same charger. Compared the two phones, and the prongs that hit the battery were bent back. I folded them back down, and now it can charge again. Makes me wonder if that is the problem with the phone not coming back on? Maybe putting the battery back in so that it wasn't hitting the prongs has been keeping it from turning back on . . .
so my mytouch 4g wont turn on even with a different battery. i plug it it in and it gives me a flash on th screen but thats it. any suggestion without sending it in
Take it to a tmo store, they'll swap it.
I got it off of Craigslist I think it was previously tampered with
Sent from my HTC Desire using XDA App
so i was in the process of doing a custom splash screen last night. i went through all the instructions on how to push the custom splash through terminal. everything went how the instructions said, but once i reboot it my phone turned off and never came back on. it doesnt power on, boot into recovery, nothing! i put the phone to charge and the red light comes on on the top left but when i take it off the charger it stays on.
i been rooted for about a month now and i was running cm7 build 8 when this happened. i just want to see if anybody has any idea on what going on. i tired everything i can think of. taking out the battery and normally powering on and nothing. taking off the battery and volume down and power to boot into recovery and nothing. taking off the battery, sd card, sim, putting back the battery and doing both normal power on and to boot into recovery and nothing.
First of all you just hijacked the guys old dead thread and second it sound like you just bricked your phone. As there is boot animation and there is slash screen. Seems like you flashed wrong thing. If the screen don't even turn on its dead then.
Sent from my HTC Glacier
Don't flame the poor guy! He's got it bad enough as is! And he didn't flash the "wrong thing" there are several threads on flashing splash screens in this phone's forum. Cut the guy some slack. He knows it may be bricked, he's just hoping it's not. And he was hoping for someone to provide some possible help. Not be be given **** for not opening a new thread.
i thread jacked because the thread was old and didnt want to clutter by starting a new one when im having some what the same problem. but no i pushed the splash image. i had already flashed a boot animation a few day back. i had call of android running on my phone as a boot animation. i just want to know is theres other methods of reaching hboot or recovery.
First of all don't put words in my mouth as my post does not contain any flame, second when I said wrong thing I meant he may not have meet the requirement for the splash image if he did correctly then obviously he would have had it up and running. Best thing for him would be going back to the original thread where he downloaded the image and asking the OP and troubleshoot it but at this point its to late all he can do now is warn others.
But if his phone is not old lol he can social engineer and play the victim card and send it back to HTC but first would be trying TMo saying he didn't get the POST OTA as he had PRE OTA and when he try to install the OTA it went blank and act like he has no idea what is going on, as he simply just want the phone to work or he will cancel service and do acting best of his life.
i already know i probably super bricked it. becuase ive bricked it before but not like this. i was able to fix it very quickly before. its like if the phone just doesnt have a battery. im just going to wait to see if anybody else has any more input. if not ill head to the tmo store see what they can do.
BlackSHELF said:
But if his phone is not old lol he can social engineer and play the victim card and send it back to HTC but first would be trying TMo saying he didn't get the POST OTA as he had PRE OTA and when he try to install the OTA it went blank and act like he has no idea what is going on, as he simply just want the phone to work or he will cancel service and do acting best of his life.
Click to expand...
Click to collapse
I do apologize for using the word flame. It was too strong. But I get fired up when people criticize instead of offering insight. If you had posted the above paragraph first, I wouldn't have had any issues. This is good and viable option. Albeit a last resort, but much better than criticizing for thread jacking. And I am the OP of the thread that he's using and am doing EVERYTHING I can to help him figure out a way to get this resolved.
coupetastic-droid said:
i already know i probably super bricked it. becuase ive bricked it before but not like this. i was able to fix it very quickly before. its like if the phone just doesnt have a battery. im just going to wait to see if anybody else has any more input. if not ill head to the tmo store see what they can do.
Click to expand...
Click to collapse
ok, I just got caught up on your issue. I am going to do a little research and see if I can come up with anything to maybe help. Do you have adb set up? What recovery are you running?
Same thing happened to me, flashed a rom rebooted and the phone never turned on again.
thanx every one for trying to help. i tried everything i can think of and i could not get that phone to power on at all. it was completely dead. so i went to the tmo store by my pad and they gave me a brand new one. now i just need to gain s=off on this one which i cant do for some reason. i dont know why since it was fairly easy to gain s=off on my other mt4g. ill figure out though.
coupetastic-droid said:
thanx every one for trying to help. i tried everything i can think of and i could not get that phone to power on at all. it was completely dead. so i went to the tmo store by my pad and they gave me a brand new one. now i just need to gain s=off on this one which i cant do for some reason. i dont know why since it was fairly easy to gain s=off on my other mt4g. ill figure out though.
Click to expand...
Click to collapse
Don't know if you used this guide yet or not but I will post it anyway http://forum.xda-developers.com/showthread.php?t=858996
toby4059 said:
Don't know if you used this guide yet or not but I will post it anyway http://forum.xda-developers.com/showthread.php?t=858996
Click to expand...
Click to collapse
I aready got s=off but thanx anyways.
Sent from my CM7 Glacier using XDA App
Hi.
I had the same problem on my htc glacier (mytouch 4g) which was turn it on, stuck on the htcwelcome screen, keep loading and then turn off automatically. My phone is rooted and cusome flashed to the new htc 3.0 sense when this happened, i did a back up and restore to the oem mytouch sense and now it is working just perfectly. So if your phone is rooted you might give it a shot and hope it will work again
i had same prob kinda
i flashed a rom was useing it for a week and today i went to use camera and while camera was loaded the screen shut off like not beining used it did the crt thing and all then it wouln't come out of it so i pulled battary after like 5 min of a lighted black screen and went to power phone back on and nothing like no batt.....
anyways what i was geting to is that i called tmoble and they said it sounded like a hardware problem if you can plug it in to wall or car charger and nothing.. when i plug it into a usb on pc i get
hsusbs or something so u all might want to look into that.
i have s mytouch 4g it wont boot
i rooted my mytouch 4g ussing gfree and then i installed sense 3.0 rom and it worked then force closed left me in bootloader then from there flasheed cm7 worked good for 15 days then said force closed again then never turned back on aghain now when i plug it back in it tells me cannot install drivver software and it recognizes it as qhsusb_dload any solutions or its a gonner contact me at [email protected]
Hello all and thanks in advance for the help.
I just got a refurb Hero from Sprint a couple weeks ago. I Rooted with Z4Root and started trying out Roms. I had just went from CM 6.2 to 6.1. Had everything working fine until my screen would stop coming out of hibernate mode. I would have to reset the phone to get the screen back on. It has gradually gotten worse (over the course of one day). Now when I reset the phone I might get the screen to turn on 1 out of 40 times, but the screen is now all messed up even when it does turn on now. I cant figure anything out other than to answer a call because I know where the slider is supposed to be on the screen for answering calls, so if someone calls I cant see anything I just swipe the screen and it answers fine.
Any ideas what might be causing this issue? Would it be a harware issue?
Thanks again
Yea I would try a different download you might have gotton a bad one. Also you should try a different rom after a full wipe. If that didn't work then I would say its a hardware issue.
Something.About.Me.U.Don’t
Like.Its.Cool.I.Understand.
.AWAH.
Thanks for the reply. I did nandroid back to every previous backup I had. Now I cant get the screen to turn on at all so, Im guessing its hardware. taking it to Sprint Today, we'll see what they say.
Thanks again
Yup, They replaced the screen and I'm back in business!
Swwet, glad to hear it man now enjoy more xda
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.
I was just wondering if there was something to do with installing different roms that could have cause the screen to go out? I am thinking not, but I am new to the whole rooting and rom-ing thing. Is it possible that something I did caused the screen to go out?
Na I doubt it. Hardware usually is the manufacturers fault or user error. Unless you droped it, banged it up real bad or flashed a gsm radio your good. And a screen issue such as yours is most def not a rom issue.The rom dev's on here are solid. And XDA is a well known and respected site. If you need any help with anything just let me know.
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.
cool thanks for the response. I was just worried that maybe I messed it up somehow. Glad that was likely not the case
Hey everyone, I have been trying to diagnose my HD2 alone for quite some time now, and thought maybe someone on XDA can help. So when i first got the phone, it ran just fine, about a month in i decided it was time to load it with a cooked rom. I used Energy rom because i loved the look. Before i had huge problems flashing it in the first place, after i got the flash to stay stable, the phone ran just fine. A while back (2010) i dropped the phone and cracked my glass. After replacing that, i had problems with the boot all over again.
When my phone boots it will boot 50% of the time, it will either freeze on the boot image (no red text) or just start up like normal. after 12-24 hours of general use, the phone will just freeze up and i will need to pop the battery out. Once i put it in, it will not boot unless i let it sit for a while. the longer i let it sit, the longer the phone stays working before it freezes. it seems that the longer it sits past a day doesnt matter, but it does increase the odds of booting in the first place. only a few times has it posted the rom number and not booted.
Im wondering if this could be a mainboard problem, or something im overlooking. I also had android problems back when 2.1 was ran from the exe. i also ran many other roms, and just recently the Nand 2.2 droid.
My biggest problem is ive spent over $100 USD trying to fix the glass/lcd.
Any imput would be greatly appreciated. so what do you think?
mdnelson09 said:
Hey everyone, I have been trying to diagnose my HD2 alone for quite some time now, and thought maybe someone on XDA can help. So when i first got the phone, it ran just fine, about a month in i decided it was time to load it with a cooked rom. I used Energy rom because i loved the look. Before i had huge problems flashing it in the first place, after i got the flash to stay stable, the phone ran just fine. A while back (2010) i dropped the phone and cracked my glass. After replacing that, i had problems with the boot all over again.
When my phone boots it will boot 50% of the time, it will either freeze on the boot image (no red text) or just start up like normal. after 12-24 hours of general use, the phone will just freeze up and i will need to pop the battery out. Once i put it in, it will not boot unless i let it sit for a while. the longer i let it sit, the longer the phone stays working before it freezes. it seems that the longer it sits past a day doesnt matter, but it does increase the odds of booting in the first place. only a few times has it posted the rom number and not booted.
Im wondering if this could be a mainboard problem, or something im overlooking. I also had android problems back when 2.1 was ran from the exe. i also ran many other roms, and just recently the Nand 2.2 droid.
My biggest problem is ive spent over $100 USD trying to fix the glass/lcd.
Any imput would be greatly appreciated. so what do you think?
Click to expand...
Click to collapse
Mate, I think it's rather hardware related problem. You better go back to the repair center before your warranty expires
silverwind said:
Mate, I think it's rather hardware related problem. You better go back to the repair center before your warranty expires
Click to expand...
Click to collapse
I went back right after i cracked the glass, and they said my insurance never covered it, even tho i pay extra on my bill for it. i voided the warranty when i replaced the lcd too
Does anyone know where i can get it fixed say under the counter or anything?
Hi there,
your first thought might be: Ah jeez another one posting the same **** 2000 people posted before ^^. But anyways i think my problem is a special case:
yesterday i wanted to flash another radio to my htc magic via clockwork recovery. However something must have gone wrong. After the recovery rebooted my phone i got stuck at the "htc magic" splash screen. Pressing the home or the back or vol-down button or home and back button at the same time doesnt change the situation. still stuck at splash screen. fastboot and recovery dont seem to work.
After some really bad panicking minutes, i pulled the batery out of the phone and let it rest, while googling and searching the **** out of every forum on the net. Some minutes later i reassembled the battery and started the htc magic without pressing any other buttons, hoping it would juts boot and say "kidding ))" on the display. but yeah ... it didnt ^^.
Now im coming to the odd part, which differs from most other posts i saw on other forums and here on xda: after quite a while my htc magic suddenly made that "bling bling" sound, as it did whenever it started android successfully. i nearly burst into tears when i heard that sound, hoping that i would be able to access the phone via fastboot or adb. but ... i wasnt able to :S. the screen went black after that "bling bling" sound and stayed that way until i pulled the battery again.
i could repeat that procedure and reproduce the sound and behaviour, but i couldnt access the phone via any possible way i could find on the web :S.
hopefully somebody, who knows more can help. my last step would be jtagging the phone. but the tools are kinda pricy for such an "old" phone. and i couldnt find anyone in my area who could borrow me the tools or repair the phone for cheap money.
thanks in advance im counting on your knowledge
Try this low cost JTAG
tested by me with 2 T-Mobile Mytouch 3G
thanks for your fast response. if jtagging really is my last chance:
- what did you pay for all the parts of the schematic ?
- how long did it take you to put everything together?
- do i need a parallel port on my computer, or is it possible to use an usb port ?
- and do you think a newbie to smoldering and stuff could be successfully assembling all those parts?
- can you provide me with links and/or other pictures, which could help me?
thanks again for your effort
kinda exciting this whole thing :>