This is a new Gingerbread Sense rom Please make a nandroid backup before Flashing, just incase you don't like it, so you wont hate me.
http://www.multiupload.com/1KQA36UXS0 - V 2 Gingerbreadeddebain.ext2.zip
http://www.multiupload.com/FEO9PZLOCP - DEBIAN squeeze, working for your eris, web, and basic setup openoffice works on this, I uninstalled for space, but just about anything that works on a desktop works on this img. Follow instructions below.
Made for 3 partitions, Fat32, ext2, swap.
To use this rom correctly you must partition your sdcard as follows:
adb shell
parted /dev/block/mmcblk0
print
Click to expand...
Click to collapse
remove any partitions
Code:
rm1
rm2
rm3
rm4
rm5
Click to expand...
Click to collapse
now create new partitions these partitions should be as so, for sense or 2.1, or gingerbread roms fat32 ext2 swap file is the order, for froyo I believe it is swap ext2 fat32, but I have not tried a froyo rom yet.
16GB sdcard, change for your correct card amount
Code:
mkpartfs primary fat32 0 11500MB
mkpartfs primary ext2 11500MB 15500MB
mkpartfs primary linux-swap 152500MB 15900MB
Click to expand...
Click to collapse
CPU clocked at 748 mhz, any higher you will freeze your phone
WORKING
DEBIAN linux mount in terminal use pocketcloud free,or android-vnc to connect.
FLASH 10.1( WORKING )
make &recieve calls
camera video
market
sms
mms
gps
navigation
widgets
sensors
search
skins
scenes
voice
wi fi
friendstream
twitter
NOT WORKING
wi fi hotspot no drivers
softkey lights (with backlight version)
A few notes:
1. IF YOU HAVE ANY PERMISSION ERRORS i.e the camera not saving images to sdcard, you have to unmount your sdcard and remount it.
2. If you don't have an ext2 or a swap partition, everything will be ok, but if you do make sure they are in the correct order, because on boot the sdcard is mounted
3. there are a few custom commands in the terminal,
Code:
bash free, term, linux, nano, swapon, swapscriptv2, swap-off, swapon50, swapon60, swapon70, swapon80, swapon90, bootscriptv2, bootswap90,bootswap80,bootswap70, mountsd, umountsd, mountsd2pc, umountsd2pc, linuxloop
[QUOTE][COLOR=red]4. This rom first boot is close to 10 minutes, be patient it will pay off.[/COLOR][/QUOTE]
[QUOTE]To use bash it is a good idea to add this to the terminal emulator's initial command just below PATH
[CODE]su -c bash
[/QUOTE]
That sets the terminal up to use bash, this will allow you to use your tracball to scroll threw old commands.
3. To chroot into linux, it is very easy if you dont have the linux, To use this debian.img download the debain.img from above and push to sdcard. /sdcard/debain.img
busybox mount -o rw,remount /
mkdir /sdcard/debain
mount -o rw,loop -t ext2 /sdcard/debain.img /sdcard/debian
dd if=/sdcard/debain of=/mnt/linux
Click to expand...
Click to collapse
this will take some time several hours maybe. use a file manager to check your progress.
Once the copy is complete, than you can open the terminal and type
Code:
linux
this should put you into a localhost:#
once in local host type:
nano /etc/init.android/rc_enter.sh
Click to expand...
Click to collapse
now add this to the file
vncserver -kill :1
rm -r tmp
mkdir tmp
cd tmp
mkdir .X11-unix
cd ..
vncserver
Click to expand...
Click to collapse
To connect to vncserver use any vncserver app and use the following info:
username: localhost
password: android
host: localhost
port: 5901
Click to expand...
Click to collapse
the new debian.img is roughly 2.5 gigs so I would make enough room on your ext2 partition for 2.5 gigs at least, if you have any problems let me know
here is a link to an old thread of 2 versions of linux, NEITHER of these are the debian.img I have and am working on. these two are just incase you want to try to play around.
you will need to know a little about linux to get them running, but they will work. http://forum.xda-developers.com/showthread.php?t=823564
I forgot to add custom cpu settings, but it can stand up to 748mhz, that is what mine is clocked at.
Things that need fixing or tweaks wanted, please help as follows:
Download Apps2SD Free to use apps on sdcard, made by AZSoft Technology.
/system folder has only 13 megs after fresh install
currently I have a data/apps/ but data/apps is mounted as sdcard/data/apps
so the phone thinks data/apps is my external sdcard memory
would like to link a few apps into the system settings If you would like to help on this rom and become part of the new team please private message.
Compiled from Google source:
http://www.mydroidworld.com/forums/htc-droid-eris/1234-android-2-1-htc-eris-leaked.html
free apps from market on phone:
quickboot
pocketcloud
terminal emulator
File manager (android open source code)
http://www.multiupload.com/6K1O736M29 - Gingerbreadeddebian v 1 - Plain (old)
you say wifi hotspot isn't working.
was that ever even a feature available for the eris?
never has worked besides an app, the only reason I say isnt working is because there is an app that works, for wifi tether, and wpasupplicant should be able to handle wifi hotspot, we just need to go threw a few files and rewrite the code. If someone has the hear they can do this, or an nother way that would make me happy would be just to change the link, for settings wifi hotspots to wifi tether app
either way I would like a more perminant way to use wifi tether make it look native
hows debian run? and which version is it?
THE SENSING VERSION IS AN ARMV STABLE VERSION, WITH VNCSERVER, AND ICEWEASEL, JUST RUN LINUX BOOT IN TERMINAL AND CONNECT TO SENSING WITH:
User:android
Localhost
Pass:android
5901
Everythingworks connects to internet, the image I posted was me searching XDA forums with it
Sent from my HTC(ERIS) CLOAKED Vision using XDA App
Does that say flash 10.1 is working...?
Yep, finaly added link for download, now adding the debain.img soon
This Rom looks just another one on here.
Sent from my...
The looks isn't what makes this Rom, its what u don't see that makes this Rom .This Rom is SENSE, any Rom that is sense will look the same, unless we change the launcher or how it looks. If you want to theme the Rom or join the team let me know, lots to work on.
Sent from my HTC Vision (cloaked-Eris running Gingerbrededdebain)using XDA App
PFongemie said:
This Rom looks just another one on here.
Sent from my...
Click to expand...
Click to collapse
GPL requires links to the source for all Rom's or Apps posted on XDA... What source is this Rom from?
Google code, and my updates added info in original post
Sent from my HTC Vision (cloaked Eris Gingerbreadeddebain using XDA App
mjgdroid said:
Google code, and my updates added info in original post
Sent from my HTC Vision (cloaked Eris Gingerbreadeddebain using XDA
Deleted should have sent a pm
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
ORIGINALY POSTED BY ITHINKTOHILYOFMYSELF TAZZ
Dude don't lie.. u used my Rom I've pulled it apart.. just thank me .. u could have asked tho. U need my boot img I had to edit it. Also u used my build prop and update script stop Ur lies
Sent from my ADR6400L using XDA Premium App
__________________
Please help control the Human population: spay or neuter your humans.
Click to expand...
Click to collapse
Dont think that highly of yourself. I didnt use any of your rom, ACTUALY I tested your rom and your ROM SUCKS, you dont have half of the lib files I have in my rom, also I did try your boot.img for the softkeyboard, BUT IT DID NOT WORK. IT FROZE MY PHONE. I WAS GOING TO THANK YOU IF THE BOOT.img worked but it did not however. update script was provided by autosigner wow you are a lamer!
OH ya and my build.prop, I edited using the thread on how to trick flash10.1 to run on android armv6 so you are wrong there too here is my build.prop for the world to see:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HCL31
ro.build.display.id=GRJ22
ro.build.version.incremental=eng.kmobs.20110510.000606
ro.build.version.sdk=11
ro.build.version.codename=REL
ro.build.version.release=3.1
ro.build.date=Thurs Sept 3 10 00:06:35 PDT 2011
ro.build.date.utc=0
ro.build.type=user
ro.build.user=localhost
ro.build.host=localhost
ro.build.tags=test-keys
ro.product.model=HTC Vision
ro.product.brand=verizon
ro.product.name=HTC Vision
ro.product.device=desirec
ro.product.board=desirec
ro.product.cpu.abi=armeabi-v6j
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
ro.build.product=Vision
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=HoneyCombed-Linux
ro.build.fingerprint=google/soju/crespo:2.3.1/GRH78/85442:user/release-keys
ro.product.version=HoneyCombed-Linux
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
#
rild.libpath=/system/lib/libhtc_ril.so
ro.ril.hsxpa=2
ro.ril.hsupa.category=5
ro.ril.enable.a52=1
ro.ril.enable.a53=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.gprsclass=10
#
wifi.interface=tiwlan0
#
windowsmgr.support_rotation_270=true
#
debug.sf.hw=1
ro.product.multi_touch_enabled=true
# Increase value for jpg decode capability
ro.media.dec.jpeg.memcap=10000000
# Screen Resolution
ro.sf.lcd_density=160
# Dalvik Tweaks
dalvik.vm.execution-mode=int:jit
dalvik.vm.heapsize=32m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Compcache Settings
ro.compcache.default=26
# Tweaks
persist.sys.use_dithering=0
ro.telephony.call_ring.delay=1000
windowsmgr.max_events_per_sec=60
wifi.supplicant_scan_interval=90
mot.proximity.delay=150
# OpenGL Settings
ro.opengles.version=165537
# Network Settings
ro.telephony.default_network=4
ro.com.google.clientidbase=android-htc-rev
ro.cdma.home.operator.alpha=Verizon
ro.com.google.locationfeatures=1
ro.cdma.home.operator.numeric=310012
ro.cdma.homesystem=128,64
ro.cdma.data_retry_config=default_randomization=960000,960000,960000,960000,960000
#
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
#
settings.display.autobacklight=1
# SD Storage insert notification sound
persist.service.mount.playsnd=0
# Additional Build Properties
ro.setupwizard.enable_bypass=1
net.bt.name=Android
ro.config.sync=yes
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.config.ringtone=Playa.ogg
ro.config.notification_sound=regulus.ogg
ro.config.alarm_alert=Alarm_Beep_03.ogg
ro.setupwizard.mode=OPTIONAL
# Rommanger Info
## NOT SET UP YET
ro.rommanager.developerid=Mike
ro.modversion=HoneyCombed-Linux
# Hardware Info
ro.product.processor=528MHz
ro.product.ram=288MB
ro.product.display_resolution=3.2 inch HVGA resolution
ro.product.main_camera=5M
ro.product.front_camera=NA
ro.product.wifi = 802.11 b/g
ro.product.bluetooth=BRF6300
Click to expand...
Click to collapse
BRING BACK KAOS
mjgdroid said:
ORIGINALY POSTED BY ITHINKTOHILYOFMYSELF TAZZ
Dont think that highly of yourself retard. I didnt use any of your rom, ACTUALY I tested your rom and your ROM SUCKS, you dont have half of the lib files I have in my rom, also I did try your boot.img for the softkeyboard, BUT IT DID NOT WORK. IT FROZE MY PHONE. I WAS GOING TO THANK YOU IF THE BOOT.img worked but it did not however. update script was provided by autosigner wow you are a lamer!
BRING BACK KAOS
Click to expand...
Click to collapse
First off .. Ur wrong and on Tuesday I will show u ok? No need for name calling dude.. u did use mine but its kool man I really don't care...u needed to edit the boot Img mind telling how u did it ? U have to copy ..I'm not gonna resort to name calling like u bro
Sent from my ADR6400L using XDA Premium App
mjgdroid said:
ORIGINALY POSTED BY ITHINKTOHILYOFMYSELF TAZZ
Dont think that highly of yourself retard. I didnt use any of your rom, ACTUALY I tested your rom and your ROM SUCKS, you dont have half of the lib files I have in my rom, also I did try your boot.img for the softkeyboard, BUT IT DID NOT WORK. IT FROZE MY PHONE. I WAS GOING TO THANK YOU IF THE BOOT.img worked but it did not however. update script was provided by autosigner wow you are a lamer!
BRING BACK KAOS
Click to expand...
Click to collapse
U need to read the GPL license here... Links to sources used for Rom's and Apps have to be posted in the OP. This is an open source forum, therefore sources need to have links for others to share in. I'm assuming since the source link isn't posted, this rom is a clone of someone else's and therefore doesn't belong up here. Given your response to the dev, that just confirms it.
Bringing Kaos back to the Eris community? Why, so you have some new source code to use? Dude, just post the source link and everything will be totally fine... If it's a clone, atleast give credit and discuss it with the Dev...
Wpw just the kind of thing I want to read in a PUBLIC FORUM. This seems like a PRIVATE issue and I am sure a lot of folks would appreciate it if y'all kept it that way.
tazzpatriot said:
First off .. Ur wrong and on Tuesday I will show u ok? No need for name calling dude.. u did use mine but its kool man I really don't care...u needed to edit the boot Img mind telling how u did it ? U have to copy ..I'm not gonna resort to name calling like u bro
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
You know there were people before you that could create roms, there are people after you can will create more roms, yours is not the best, and you try to say that it is.
I was kind enough to not tell people all you do is put a luancher on an old build of froyo, and call it a new rom, like your IPHONE ROM, and the reason I can say this is, because about a year ago I posted the windows7.apk. This post stopped you from creating " a new rom" even though it was no new rom, just an old foryo with a new windows7.apk. Talk about taking peoples work and making it yours.
mjgdroid said:
You know there were people before you that could create roms, there are people after you can will create more roms, yours is not the best, and you try to say that it is.
I was kind enough to not tell people all you do is put a luancher on an old build of froyo, and call it a new rom, like your IPHONE ROM, and the reason I can say this is, because about a year ago I posted the windows7.apk. This post stopped you from creating " a new rom" even though it was no new rom, just an old foryo with a new windows7.apk. Talk about taking peoples work and making it yours.
Click to expand...
Click to collapse
Dude I can. Count how many ways that statement is wrong Windows ? but I'm done. Not gonna argue with u peace
Just one more thing and ill never speak about it again
U should remove system/etc/ init.d/ 40data2text from Ur update script.
I REMOVED IT FROM MY ROM..lol that's y its not in Ur folder
Now if u wish to continue pm me not here if in my thread
Sent from my ADR6400L using XDA Premium App
I'm getting really confused here Lol
Sent from my ADR6300
http://forum.xda-developers.com/showthread.php?t=755526
Sent from my ADR6300
Related
Base is Acer_A500_7.006.01_COM_GEN2.
Rooted.
Deodex.
Busybox.
Bloatware removed.
Bootloader unlocked.
Recovery partition is left unchanged.
This ROM is intended as a base for other ROM's OR regular use without all the bloatware.
It is a "clean" stripped out version of the 7.006.01_COM_GEN2 update (full update, not OTA). The COM_GEN version does not matter a great deal. It will not hurt anything to install this on a GEN1 or GEN3 tablet. The hardware is exactly the same.
I keep track of everything that is changed, you can view the history and create this ROM yourself.
This will probably be the last update on this ROM until a large change in the OS occurs again. I built it to be quick, stable, and bloatware free. It is all of those.
Latest Version
Version History:
v1110062238
v1109261806
v1109252300
v1109251910 - Initial Release
Orginal ROM I worked off of can be found here
Notes:
This ROM will not recieve over the air updates. You would need to restore FWUpdateService* and FDUpdater* to re-enable OTA.
This requires CWM or similar to flash. It does not modify the recovery partition when installed.
Google Maps, Videos, Music2, and AdobeFlash have been removed. The latest versions can be downloaded through the market.
Feel free to restore any apks you you want, they should reintegrate without issue.
ROMs based off of this one in whole or in part:
Civato's ROM
Thanks List:
sc2k, thor2002ro, vache, civato
Changes
v1110062238 -
Changed updater-script as needed.
Removed an additional unneeded apk and a few files.
The version of su and Superuser.apk is from su-3.0.2-efgh-signed.zip.
Installed busybox v1.19.2 and symlinked the appropriate binaries in the updater-script.
v1109261806 -
Removed a few additional unneeded apks.
The version of su and Superuser.apk is from su-3.0-efgh-signed.zip.
v1109252300 -
Changed updater-script as needed.
Removed the bootloader.blob (Locked bootloaders don't concern me but would give you trouble!)
v1109251910 -
Changed updater-script as needed.
Deodexed entire ROM by hand using baksmali/smali v1.2.8.
The version of su and Superuser.apk is from su-2.3.6.3-efgh-signed.zip.
Opened flexrom.img and removed folder app. This had a preinstall apk that did nothing in this version. It only brought up an annoying message when firstrun saying "apk preinstaller complete".
Code:
ADDED:
/system
/app
Superuser.apk
/bin
busybox
su
REMOVED:
/Acer_A500_7.006.01_COM_GEN2.txt
/apkinstaller.temp
/bootloader.blob
/flexrom.img/app*
/Instruct_record.txt
/recovery*
/system
/app
3DPhotoBrowser.*
AcerAbout.*
AcerClockWidget.*
AcerDLNA.*
AcerNidus.*
AcerOneTimeInit.*
AcerRegistration.*
AcerSync.*
AcerSyncHelper.*
AdobeFlashPlayer.*
AgendaWidget.*
ApInAp.*
Aupeo.*
BooksTablet.*
Calculator.*
Clearfi.*
DeskClock.*
DigitalClockWidget.*
DTG.*
Email.*
Exchange.*
FDUpdater.*
FWUpdateService.*
GameLoftStore.*
HeroOfSparta.*
LetsGolf.*
LinkToFacebook.*
LiveWallpapersPicker.*
LumiRead.*
MagicSmokeWallpapers.*
Maps.*
MusicA.*
Music2.*
MyLocationWidget.*
nemoPlayer.*
NFS.*
Nook.*
SocialJogger.*
Street.*
TegraZone.*
Videos.*
VideoEditorGoogle.*
VisualizationWallpapers.*
VoiceSearch.*
WeatherWidget.*
ZinioReader.*
ZinioSettingsProvider.*
/etc/permissions
com.acer.android.clearfilib_tablet.xml
/framework
com.acer.android.clearfilib_tablet.jar
Developers Extras
These are extras that rom devs can use. If you aren't building a rom, this section wont matter to you.
Below are the framework jars from 7.006.01. They have all been deodex'd.
Deodex'd Framework Jars 7.006.01
Below are all of the APKs from the app folder (including ones I have removed from the ROM above). They have all been deodex'd (with the exception of voicesearch.apk, im working on it) and can be added into the update package without issue.
Deodex'd APK's from 7.006.01
Some applications will require restoring multiple files to their respective directories. Here is a list of dependancies.
Code:
[B]Dependancies:[/B]
Clear.fi-
AcerDLNA.*,Clearfi.*,com.acer.android.clearfilib_tablet.xml,com.acer.android.clearfilib_tablet.jar
TegraZone-
Download the latest TegraZone from android market
Do you have a recommendation of kernal for this? Are you using Richards?
I am not currently using a stock kernel with this. I have not changed anything. I am in the process of getting together a few boot.img with new kernels and posting those here as extras. In the meantime richards should work assuming it is compatible with 3.2 (im 99% sure it is)
GamezR2EZ said:
Below are the framework jars from 7.006.01. They have all been deodex'd.
Deodex'd Framework Jars 7.006.01
Below are all of the APKs from the app folder (including ones I have removed from the ROM above). They have all been deodex'd and can be added into the update package without issue.
Deodex'd APK's from 7.006.01
Click to expand...
Click to collapse
What are these files used for? I thought the framework jars were a necessary part of the OS (not a programmer or anything) Should I install them?
hroberts89436 said:
What are these files used for? I thought the framework jars were a necessary part of the OS (not a programmer or anything) Should I install them?
Click to expand...
Click to collapse
These are extras for dev use only. If you aren't building a rom this wont matter to you,
I just finished installing the ROM.
During the installation, however, I got this error.
random offset 0x136
Does this mean anything? The installation did go without any other glitches and I have been using the tablet with your ROM for about half an hour now. Works without any problems.
How do you get the media server working with clearfi , now it crashes when you try to start the media server in clear fi.
EDIT:
Ok I got it , added the clearfi framework and the Acer DLNA apk and now it works.
skiddhard said:
I just finished installing the ROM.
During the installation, however, I got this error.
random offset 0x136
Does this mean anything? The installation did go without any other glitches and I have been using the tablet with your ROM for about half an hour now. Works without any problems.
Click to expand...
Click to collapse
I always receive that message for every ROM I install. I have never tracked down why it is there. I believe it has to do with formatting a partition (maybe installing the flexrom?), but I do not know. Unless you are told otherwise, I wouldn't worry about it.
I get random offset messages to , but never experience any problems .
First , REALLY nice rom , you can install what you want and it is fast !!!
GPS fix is so fast and this even when I'm in the house ( I did use a modded GPS config for it but I did that with all the roms).
Not working , tegrazone but that is no problem.
The HD widget doesn't find my location if I set it at auto search (strange because the gps lock-on is so fast) that is the only problem that I got with it and that is no biggy.
Thanks !!!!!!
my gps config (edit before flash)
Code:
NTP_SERVER=eu.pool.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
INTERMEDIATE_POS=1
C2K_HOST=c2k.pde.com
C2K_PORT=1234
SUPL_HOST=FQDN
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_SECURE_PORT=7275
SUPL_NO_SECURE_PORT=3425
SUPL_TLS_HOST=FQDN
SUPL_TLS_CERT=/etc/SuplRootCert
ACCURACY_THRES=5000
CURRENT_CARRIER=common
DEFAULT_USER_PLANE=TRUE
REPORT_POSITION_USE_SUPL_REFLOC=1
Life wallpaper to work = "LifeWallpapersPicker.apk
Clear-FI to work = Clear-FI.apk and AcerDLNA.apk and framework "com.acer.android.clearfilib_tablet.jar (needs to be added in the framework folder)
Also modded my "build prop" before flash = added "ro.carrier=wifi-only" so the simcard messages won't pop-up.
Using THOR 3.5 kernel and NO problems , can oc the hell out of it.
Im glad to hear it! I will check into tegrazone and update the dependencies section with what I find. Also, did you restore the Clearfi xml file to the etc permissions folder as well? I dont know if it will cause issue if you dont, but it is there in the original ROM.
/system/etc/permissions/com.acer.android.clearfilib_tablet.xml
Are you using an A500? Or an A501?
Thanks. Downloading now
I'm liking the sound of this rom, I'll be giving it a shot in a few and installing richardtrips 3.2 kernel.
I'll report back with my findings.
GamezR2EZ said:
Im glad to hear it! I will check into tegrazone and update the dependencies section with what I find. Also, did you restore the Clearfi xml file to the etc permissions folder as well? I dont know if it will cause issue if you dont, but it is there in the original ROM.
/system/etc/permissions/com.acer.android.clearfilib_tablet.xml
Are you using an A500? Or an A501?
Click to expand...
Click to collapse
Did not restore the ClearFI xml in etc permissions , it is restored automaticly when you restore the .jar in the framework.
Look at my sig : I'm using a Packard Bell LibertyTab (exactly the same as a A500) So wifi only. After flash of this rom I got a A500. Packard bell is just so slow on updates still HC3.0.1
I made some changes to the rom for me , now it installes "busybox" , "drivemount"and "es file explorer" when you flash it , don't need to go into the market to install those apps.
For the tegra zone I can use the kitchen for taboonay , tested this and it worked.
This is the "build prop" (no more sim card messages)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HTJ85B
ro.build.display.id=Acer_A500_7.006.01_COM_GEN2
ro.build.system.id=Acer_A500_7.006_COM_GEN2
ro.build.version.incremental=1315474096
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2
ro.build.date=Thu Sep 8 17:52:34 CST 2011
ro.build.date.utc=1315475554
ro.build.type=user
ro.build.user=
ro.build.host=lion2
ro.build.tags=release-keys
ro.build.sku=COM_GEN2
ro.product.model=A500
ro.product.brand=acer
ro.product.name=picasso_comgen2
ro.product.device=picasso
ro.product.board=picasso
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Acer
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=picasso
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=picasso_comgen2-user 3.2 HTJ85B 1315474096 release-keys
ro.build.fingerprint=acer/picasso_comgen2/picasso:3.2/HTJ85B/1315474096:user/release-keys
ro.build.characteristics=tablet
# end build properties
ro.opengles.version = 131072
wifi.interface=wlan0
keyguard.no_require_sim=1
ro.dinfo.version=1.0
ro.cpu.vendor=nVidia
ro.cpu.speed=1.0 GHz
ro.cpu.version=T20
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
ro.com.google.clientidbase=android-acer
acer.sync.adb.mode=ENABLED
ro.error.receiver.system.apps=com.acer.android.nidus
drm.service.enabled=true
ro.product.modelalias=A500
ro.tether.denied=true
ro.setupwizard.mode=REQUIRED
ro.com.google.gmsversion=3.2_r2
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.carrier=wifi-only
APPs that I put back
3DPhotoBrowser
AcerDLNA (this is needed to get the mediaserver with clearfi)
AdobeFlashPlayer
AgendaWidget
Calculator
com.estrongs.android.pop(ES file exporer let it update with market for root acces)
DeskClock
DigitalClockWidget
DriveMount
Email
LetsGolf
LiveWallpapersPicker (need this so you can use live wallpapers)
LumiRead
MagicSmokeWallpapers (live smoke wallpaper)
Maps
nemoPlayer (acermedia)
NFS
VideoEditorGoogle (video editor)
Busybox & drivemount install on flash
In the main folder I put the "installbusybox" file from Taboonay 2.1 (SO A BIG THANKS TO VACHE)
And in the system/xbin folder I put the "busybox" file from Taboonay 2.1 (SO A BIG THANKS TO VACHE)
And the drivemount.apk from that same taboonay rom.
(extract files from taboonay and place it at the same place it is installed on the taboonay rom)
All working supurb.
You dont need vache's files for that.
You can set everything up in the updater-script. Just setup the symlinks there, and permissions for the busybox binary.
I am a bit curious about the SIM card messages. I have never received one. We know ro.carrier=wifi-only will fix it, but again I have never received one.
If you have a decent ROM you should post it in a new thread for everyone to enjoy. That was part of my goal here
GamezR2EZ said:
You dont need vache's files for that.
You can set everything up in the updater-script. Just setup the symlinks there, and permissions for the busybox binary.
I am a bit curious about the SIM card messages. I have never received one. We know ro.carrier=wifi-only will fix it, but again I have never received one.
If you have a decent ROM you should post it in a new thread for everyone to enjoy. That was part of my goal here
Click to expand...
Click to collapse
I really don't know where to start with the the update-script , I'm a noob at these things , I do everything with trail and error .
But like I said the rom is working fast and smooth.
Well I got the sim card messages because of the custom kernel I'm running.
If I did some more testing I will post the rom for download.
Again thanks for this rom and the apps , it's nice to fool around with something I don't know.
I had to stop using this rom , I think you moved to many things , it was not stable , (gps was doing strange things , keeps hanging in search) , but is was really good for benchmarking.
Could you just deodex and su it and leave the rest as it is so I can mess around with it.
I've been using this Rom since yesterday afternoon and I've yet to have any instabilities, FC's or issues with it. It's exactly what I have been looking for, just a clean stripped vanilla rom. The only app I've felt compelled to put back was livewallpaperspicker.apk so I can use multiple live wallpaper, also added the build.prop line to remove sim card notification. Everything else I got from the market.
My GPS doesn't seem to have any ill effects, I used the worldwide modified gps.conf and pick up 4-5 satellites pretty quick using GPS status and GPS test. I'll have to spend most of the day about towns o I'll put the GPS through it's paces an report any problems.
BTW I'm running Richardtrips 3.4 kernel @ 1.5ghz, it's solid and it does great in benchmark .
civato said:
I had to stop using this rom , I think you moved to many things , it was not stable , (gps was doing strange things , keeps hanging in search) , but is was really good for benchmarking.
Could you just deodex and su it and leave the rest as it is so I can mess around with it.
Click to expand...
Click to collapse
Its funny that you say that, I actually stripped everything out to INCREASE stability. I found that with acers crap added back in, the whole system wanted to crash a bit more often.
I do have the entire rom deodex'd. If you would like to download the deodex-app.zip in my third post and dump all of those files to the /system/app/ folder then install the zip, you will have what you are asking for.
If you can explain what was crashing in a bit more detail, we can probably track down the cause (be it this ROM or otherwise)
New!!! -- BETA! BETA! BETA!-- UCKI1 kernel with Voodoo lagfix!
See this thread....
======================================
Mod_Boog_KH3_kernel_V3_V1
Thanks to Boog for a great kernel! I took it apart and tweaked it a bit mainly so that I would have full functionality in ADB and DDMS.
default.prop
Changed the following to allow ADB / DDMS to run as root:
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
init.rc
Modified to execute /system/etc/init.d scripts at boot. Also added sysctl.conf to /system/etc.
more...
Symlinks from Busybox to "ls" and "ps" have been removed from /sbin so that DDMS will work correctly. They now fall back to Toolbox links in /system/bin.
Several scripts have been added to /system/etc/init.d for experimenting. They can be removed, modified and added to as desired. However, the script "S99complete" should remain intact... without it NO scripts will be executed.
Have fun!
DOWNLOAD HERE
> Modified to execute /system/etc/init.d scripts at boot. Also added sysctl.conf to /system/etc.
How did you done that?
If /etc/init.d can be runned - can we have a mount commands changed to ext4?
Yuna said:
> Modified to execute /system/etc/init.d scripts at boot. Also added sysctl.conf to /system/etc.
How did you done that?
If /etc/init.d can be runned - can we have a mount commands changed to ext4?
Click to expand...
Click to collapse
I'll post the relevant parts of init.rc tomorrow... it's 2 am here and I'm going to bed! As for changing the mounts to ext4, there probably is a way but I'm not sure I want to be in the kernel / rom business. I just needed to fix ADB / DDMS and got a bit carried away.
by asking "how did you done that" i mean - how did you managed to change init.rc in pre-compiled kernel?
Yuna said:
by asking "how did you done that" i mean - how did you managed to change init.rc in pre-compiled kernel?
Click to expand...
Click to collapse
I extracted the ram disk with a script... I'll post that tomorrow also.
Yuna said:
by asking "how did you done that" i mean - how did you managed to change init.rc in pre-compiled kernel?
Click to expand...
Click to collapse
Get the extraction scripts here:
http://forum.xda-developers.com/showthread.php?t=901152
repackImage.sh has a bug though...
search for and change:
local at_min=
to
local at_min=0
Thanks.. I will give it a try. Good job and good luck for future work.
mtcarey said:
Mod_Boog_KH3_kernel_V3_V1
Thanks to Boog for a great kernel! I took it apart and tweaked it a bit mainly so that I would have full functionality in ADB and DDMS.
default.prop
Changed the following to allow ADB / DDMS to run as root:
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
init.rc
Modified to execute /system/etc/init.d scripts at boot. Also added sysctl.conf to /system/etc.
more...
Symlinks from Busybox to "ls" and "ps" have been removed from /sbin so that DDMS will work correctly. They now fall back to Toolbox links in /system/bin.
Several scripts have been added to /system/etc/init.d for experimenting. They can be removed, modified and added to as desired. However, the script "S99complete" should remain intact... without it NO scripts will be executed.
Have fun!
DOWNLOAD HERE
Click to expand...
Click to collapse
good job as a dev adbd as root is mandatory
ki2 is out what are you waiting for ?
mtcarey said:
Mod_Boog_KH3_kernel_V3_V1
Thanks to Boog for a great kernel! I took it apart and tweaked it a bit mainly so that I would have full functionality in ADB and DDMS.
default.prop
Changed the following to allow ADB / DDMS to run as root:
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
init.rc
Modified to execute /system/etc/init.d scripts at boot. Also added sysctl.conf to /system/etc.
more...
Symlinks from Busybox to "ls" and "ps" have been removed from /sbin so that DDMS will work correctly. They now fall back to Toolbox links in /system/bin.
Several scripts have been added to /system/etc/init.d for experimenting. They can be removed, modified and added to as desired. However, the script "S99complete" should remain intact... without it NO scripts will be executed.
Have fun!
DOWNLOAD HERE
Click to expand...
Click to collapse
Awesome! This is what I was looking for! Was hoping that someone with a bit more knowledge would chime in on some of this stuff.
I am super new to tweaking all that stuff, I'll look into your changes, and could roll them back over into mine, and future releases. All the fun stuff is coming out while I am at work!
boog said:
Awesome! This is what I was looking for! Was hoping that someone with a bit more knowledge would chime in on some of this stuff.
I am super new to tweaking all that stuff, I'll look into your changes, and could roll them back over into mine, and future releases. All the fun stuff is coming out while I am at work!
Click to expand...
Click to collapse
Have at it boog! I didn't really know these changes off the top of my head... had to dig around a bit. I'll post the change to init.rc soon for the init.d stuff.
DAGr8 said:
good job as a dev adbd as root is mandatory
ki2 is out what are you waiting for ?
Click to expand...
Click to collapse
I'll leave ki2 to boog... got my hands full with app development!
Modification of init.rc to run init.d scripts at boot
# ============================================== MTC
setprop cm.filesystem.ready 0
start sysinit
on property:cm.filesystem.ready=1
### Script S99complete in init.d sets this property to 1 and
### allows processing to continue. Do not remove this script!!!
# ==================================================
class_start default
## Daemon processes to be run by init.
##
# Declaration of service to execute scripts in /etc/init.d ===== MTC
service sysinit /sbin/run-parts /system/etc/init.d
disabled
oneshot
# =================================================
Mtcarey, if you could get EXT4 support on this kernel you would be a God!!!
Sent from my SAMSUNG-SGH-I897 using xda premium
amwbt said:
Mtcarey, if you could get EXT4 support on this kernel you would be a God!!!
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Funny you should mention that.... I was just just looking into it.
mtcarey said:
Funny you should mention that.... I was just just looking into it.
Click to expand...
Click to collapse
Please do! Since designgears left the Captivate, no one cares to keep up the work. In my opinion, the Captivate is useless without it. I just can't bring myself to run a Captivate rom without EXT4 support.
Sent from my SGH-I897 using xda premium
amwbt said:
Please do! Since designgears left the Captivate, no one cares to keep up the work. In my opinion, the Captivate is useless without it. I just can't bring myself to run a Captivate rom without EXT4 support.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
The latest builds fly without ext4. Not sure I would call it useless.
But, I ended up getting into the kernel stuff because it appeared no one else was going to.
boog said:
The latest builds fly without ext4. Not sure I would call it useless.
But, I ended up getting into the kernel stuff because it appeared no one else was going to.
Click to expand...
Click to collapse
I agree with you, ki2 is super fast and stable (with no ext4)
mtcarey said:
Funny you should mention that.... I was just just looking into it.
Click to expand...
Click to collapse
If you do find something, I would be curious to know. Everything I have tried (pulling lagfix out of other kernels) results in initramfs being too large. Even after removing all the voices.
I'm just not sure how much gain would be had for all the work. Getting sources would be cool.
boog said:
If you do find something, I would be curious to know. Everything I have tried (pulling lagfix out of other kernels) results in initramfs being too large. Even after removing all the voices.
I'm just not sure how much gain would be had for all the work. Getting sources would be cool.
Click to expand...
Click to collapse
Yup. Exactly what happened to me. I tried everything to get the size down, but still ended up about 1 mb too big. Oh well, it was a learning experience. I agree that there probably isn't much to gain anyway... rfs now seems as fast as ext4 ever was.
Why don't you make your own lagfix? e.g why need to put all the voodoo stuff, if you (IMHO) need to edit init.rc mount stuff:
mount rfs /dev/block/mmcblk0p2 /data nosuid nodev crypt check=no
mount rfs /dev/block/stl10 /dbdata nosuid nodev crypt check=no
Why not to try this way?
Well, voodoo by itself is good cos it auto-converts partitions - but sometimes it lags
but why not to do this, and after time make a auto-conversion script?
Could any of the verizon owners please provide a copy of the MediaHub.apk app as well as a copy of their build.prop just to verify the setup to use the apk on non verizon tabs. Thanks
Using Galaxy Tab 7.7 P6800
I had removed that app from my pad, but made a backup.
prscott1 said:
I had removed that app from my pad, but made a backup.
Click to expand...
Click to collapse
Thanks
Using Galaxy Tab 7.7 P6800
prscott1 said:
I had removed that app from my pad, but made a backup.
Click to expand...
Click to collapse
Anyway you can share your build.prop or take a screen shot of it. I installed the app changed my build.prop to show as verizon tab but app won't open. If anyone else can share your thoughts, thanks.
Using Galaxy Tab 7.7 P6800
Here ya go.
Code:
[email protected]fied1A:~$ adb kill-server
[email protected]:~$ adb connect 10.83.94.242:8000
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
connected to 10.83.94.242:8000
[email protected]:~$ adb shell
$ cat /system/build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HTJ85B
ro.build.display.id=HTJ85B.I815FA02
ro.build.version.incremental=I815FA02
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2
ro.build.date=Thu Jan 19 15:19:14 KST 2012
ro.build.date.utc=1326953954
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-79
ro.build.tags=release-keys
ro.product.model=SCH-I815
ro.product.brand=Verizon
ro.product.name=SCH-I815
ro.product.device=SCH-I815
ro.product.board=SCH-I815
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc210
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SCH-I815
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SCH-I815-user 3.2 HTJ85B I815FA02 release-keys
ro.build.fingerprint=Verizon/SCH-I815/SCH-I815:3.2/HTJ85B/I815FA02:user/release-keys
ro.build.characteristics=tablet
ro.flash.resolution=1080
# Samsung Specific Properties
ro.build.PDA=I815FA02
ro.build.hidden_ver=I815FA02
ro.build.changelist=619502
# end build properties
#
# system.prop for smdkc210
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
wifi.interface=wlan0
wlan.driver.apmode "unloaded"
#
# system prop for Keyguard
#
keyguard.no_require_sim=yes
ro.setupwizard.prepay_setup_url=http://quickaccess.verizonwireless.com/bbportal/oem/start.do?imsi=^1
ro.setupwizard.prepay_redir_url=quickaccess.verizonwireless.com
ro.setupwizard.timeout=60000
ro.setupwizard.host.url=http://www.google.com
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-samsung
ro.com.google.locationfeatures=1
ro.opengles.version=131072
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-samsung
ro.com.google.clientidbase.yt=android-verizon
ro.csc.sales_code=VZW
ro.secdevenc=true
ro.secdirenc=true
ro.secfulldirenc=true
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=288m
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.setupwizard.enterprise_mode=1
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.error.receiver.system.apps=com.google.android.feedback
ro.com.google.clientidbase=android-samsung
ro.com.google.gmsversion=3.2_r6
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Good_Morning.ogg
dev.sfbootcomplete=0
dev.powersave_fps=0
ro.ril.hsxpa=1
ro.ril.gprsclass=10
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Thanks now I just need to figure out what to change without messing mine up lol
Using Galaxy Tab 7.7 P6800
adinis78 said:
Thanks now I just need to figure out what to change without messing mine up lol
Using Galaxy Tab 7.7 P6800
Click to expand...
Click to collapse
Did you install it by copying it to system/app and then rebooting or did you install it as a user app? If you copied it to the system/app directory, did you check the permissions of the file first?
HTH.
prscott1 said:
Did you install it by copying it to system/app and then rebooting or did you install it as a user app? If you copied it to the system/app directory, did you check the permissions of the file first?
HTH.
Click to expand...
Click to collapse
Installed as user app. How do I check the permissions?
Using Galaxy Tab 7.7 P6800
So i tried to modify the build.prop by changing GT-P6800 to SCH-I815 to spoof the app into thinking its installed in a Verizon tab but no luck. Any suggestions?
Using Galaxy Tab 7.7 P6800
adinis78 said:
Installed as user app. How do I check the permissions?
Using Galaxy Tab 7.7 P6800
Click to expand...
Click to collapse
You should uninstall it as a user app and use adb to push it to /system/app/ directory.
to check permissions:
adb shell
ls -l /system/app/filename.ext
where filename.ext is the name of the apk.
Compare it to any of the other files in the /system/app folder
do
ls -l /system/app
The thing is that I don't know how to use adb, but I have already copied it to the system/app. I don't know what else to do for it to work, that's if it even will work. It shows up as com.Samsung.mediahub.apk
Using Galaxy Tab 7.7 P6800
prscott1 said:
You should uninstall it as a user app and use adb to push it to /system/app/ directory.
to check permissions:
adb shell
ls -l /system/app/filename.ext
where filename.ext is the name of the apk.
Compare it to any of the other files in the /system/app fold
ls -l /system/app
Click to expand...
Click to collapse
So i used the ls -l /system/app on terminal emulator and noticed that all the apps contain a .apk and .odex extention, I also noticed that mediahub does not show up even though its in the system/app. If i click on com.Samsung.madiahub.apk I can select to install it but it says its already installed. Anyone with more knowledge if they can help me sort this out. Sorry for being such a pain in the @$$
Using Galaxy Tab 7.7 P6800
This is how the app is saved
Sent from my SCG-I815 using xda premium
These are the permissions, not sure what that means
Sent from my SCG-I815 using xda premium
adinis78 said:
These are the permissions, not sure what that means
Sent from my SCG-I815 using xda premium
Click to expand...
Click to collapse
The short answer is those permissions are fine.
If you want a bit more detail, unix filesystems have three permissions per file, and each permission assigned to three categories of users. The permissions are read, write, and execute, and the user categories are owner, group, and everyone, respectively. So you have rw-rw-r-- meaning that the owner (usually root for android files) and everyone in the file's group (in android terms, anyone with the permission to read/write the sd card) can read and write but not execute the file, and everyone can read it. The last one is the most important, that everyone have read permission. If you're wondering why an app doesn't need "execute" permission, just remember that permissions are a low-level filesystem construct and apps are actually packages of higher-level stuff. Execute permission is only relevant to native binaries (think .exe files in Windows) and scripts (think .bat files). The latter is relevant if you ever modify your init.d scripts, as they need to be executable.
As for why the app isn't working, I have no idea. You could try to change your build.prop again with SCH-I815 instead of SCG-I815 like you seem to have currently (at least, according to your forum signature thing). I'm not surprised that Samsung would lock down their hub apps per device though. Have you tried media hub apk from SGS2 or something similar?
You know what I thought I had changed the build.prop back to read gt-p6800 but I guess I didn't, thanks for that. I did make changes to the build.prop to read sch-i815 as per another member that provided their verizon build.prop and i kept getting screen refreshes so i had to restore the system. I don't know what else to try. I am sure it could be done as I was able to do it on my original tab using mediahub and build.prop from att tab and run it on tmobile tab and it worked so i thought this would be the same. If i where to use the mediahub hub from the sg2 I would be stuck in the same predicament. Hopefully someone whit a lot more knowledge can shade some light. Thank you for the info and help.
You might want to just flash the rooted, deodexed stock rom found in the development section rather than try to piece together stock again. The apk I posted earlier was from my own debloated, deodexed rom.
prscott1 said:
You might want to just flash the rooted, deodexed stock rom found in the development section rather than try to piece together stock again. The apk I posted earlier was from my own debloated, deodexed rom.
Click to expand...
Click to collapse
Then loose ability to get Samsung update if i do that
Sent from my GT-P6800 using xda premium
i have PA, MIUIJB, CynaX... .etc. installed in my NativeSD everythings workn great..
just have a noob question... how can i share apps from all the NativeROMs??
cigsm0knman said:
i have PA, MIUIJB, CynaX... .etc. installed in my NativeSD everythings workn great..
just have a noob question... how can i share apps from all the NativeROMs??
Click to expand...
Click to collapse
Sharing apps is not supported yet... Maybe in the future. You never know what HD2 is capable to do.
:victory: Sounds Possible!! HD2 is one hell of a machine :good:
Any news on this? I took a look at securecrt's post here and it says the following:
Code:
# /NativeSD/NexusHD2/
# /system
# /data
# /PA/
# /system
# /data
# /MIUI/
# /system
# /data
# /app
# [COLOR="Red"]the app dir is shared for all ROMs[/COLOR]
Do I have to manually put apps into the above mentioned folder so that all ROMs can use them?
Thanks for any help!
- experience7
Welcome to Gen8 CYANOBIZ Support thread!
ATTENTION: This build is stil in early Beta stage! Bizcuite is not responsible of bricked tabs, world war or some kind of alien invasion!
What is this thread for?
This thread is made to help people run CYANOBIZ Unofficial CM9 on their tabs, report bugs related to this ROM and share tips and tweaks.
Before adding your problem(s):
Make sure you are running the latest release of CYANOBIZ !
Make sure your problems is not already listen in the OP (aka this post) !
Bug/Problem list:
Bluetooth can work only by command in Terminal Emulator. Not fixed yet.
Camera. Preview only (can not take pictures for now). Not fixed yet.
Battery stats (% works but no notification of charge). Not fixed yet.
Each problem reported by user will be posted here after its accepted. Remember to use the latest build before reporting.
How to install CM9 step by step:
You have to install SDE before you attempt to install CM9. Follow the guide in this thread: http://forum.xda-developers.com/showthread.php?t=930197
From now on you have to download the files only from this thread: http://forum.xda-developers.com/showthread.php?t=1941377
Step 1: Download and decompress (unzip) CM9 image file. Rename it to "openaos-cm.img".
always remember to download the file made for your device. Each device has different specification like screen size, RAM, etc.
Step 2: Download zImage.zip (its usually named with the date of the build like "zimage041013.zip") and rename it to "zImage". Do NOT decompress it!
Step 3: Download "initramfs.cpio.gz".
Step 4: Download "data.img.tar.gz", decompress it and choose the size that fits to your needs. (This file will be used to install apps. If you usually install low amount of apps you can use 256MB. Recommended size: 512 MB.. After you decompress it, rename it to "data_ICS.img" and copy it to the root of your internal storage.
Step 5: Copy the decompressed CM9 system file (openaos-cm.img) to the root of your internal storage.
Step 6: Create a new text file. Insert this line: ICS||/openaos-cm.img|/init|0Archos|ARCHOS|ARCHOS|/init and save it. Rename the text file to "menu.lst" and copy it to the internal storage. (If it doesnt work open "menu.lst" with Notepad++ and add one additional line below by pressing enter)
Step 7: Installing the kernel and initramfs.cpio.gz:
Reboot your tab into recovery. Select Recovery System => Developer Edition Menu => Flash Kernel and Initramfs. Connect your tab to your PC via USB and copy the files from steps 2 and 3. (Its recommended to copy the files one by one)
You are done! :good:
Currently the kernel is not supported by other ROMs (except stock firmware with stock kernel).
How to add swap file
Use adb or Terminal Emulator and add these lines:
If you are going to copy the lines copy it line by line do not copy-paste the whole guide else it wont work!
swapoff -a
rm /swapfile
rm /system/etc/fstab
dd if=/dev/zero of=/swapfile bs=1024 count=50000
mkswap /swapfile
touch /system/etc/fstab
echo "/swapfile none swap sw 0 0" >> /system/etc/fstab
swapoff /dev/block/ramzswap0
swapon -a /swapfile
This activates a swap file of 50MB in the root of your system image file (CYANOBIZ_xxx.img also knows as openaos-cm.img
Do NOT increase the size over 50MB because the system will become full and it will result in a bootloop!
How to activate swap in internal SD card (storage). This way you can put highter value like 128MB/256MB/512MB/etc.
Use adb or Terminal Emulator and add these lines:
If you are going to copy the lines copy it line by line do not copy-paste the whole guide else it wont work!
swapoff -a
rm /mnt/storage/swapfile
rm /system/etc/fstab
dd if=/dev/zero of=/mnt/storage/swapfile bs=1024 count=128000
mkswap /mnt/storage/swapfile
touch /system/etc/fstab
echo "/mnt/storage/swapfile none swap sw 0 0" >> /system/etc/fstab
swapoff /dev/block/ramzswap0
swapon -a /mnt/storage/swapfile
If you want to see if it's working type "cat /proc/swaps"
You should see this:
cat /proc/swaps
Filename Type Size Used Priority
/mnt/storage/swapfile file 127972 0 -1
You swapfile is done!
Notice: Sometimes a logcat worths more then a hundred words.
If you like the ROM and you'd like to support it feel free to donate to Bizcuite. This way you can tell him a huge "Thank You" and support his job.
CYANOBIZ Unofficial CM9 Tips & Tweaks
These tweaks come with no warranty! There is a change of bootloop if you edit the wrong value.
Open your root File Explorer (most people use RootExplorer) then go to /system and add these lines to your Build.prop file:
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
wifi.interface=tiwlan0
net.dns1=8.8.8.8
net.dns2=8.8.4.4
qemu.hw.mainkeys=1
wifi.supplicant_scan_interval=120
persist.sys.usb.config=mass_storage,adb
ro.telephony.default_network=0
# dalvik props
persist.adb.notify=0
dalvik.vm.heapstartsize=25m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=160m
#dalvik.vm.dexopt-flags=m=y
#dalvik.vm.heapstartsize=5m
#dalvik.vm.heapgrowthlimit=48m
#dalvik.vm.heapsize=196m
dalvik.vm.dexopt-flags m=y,o=v,u=y
ro.fb.mode=1
ro.sf.compbypass.enable=0
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.ril.disable.power.collapse=1
debug.sf.hw=1
debug.composition.type=gpu
debug.composition.type=c2d
windowsmgr.max_events_per_sec=240
ro.ui.fullscreen=false
debug.performance.tuning=1
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=0
#ro.telephony.call_ring.delay=0
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.carrier=wifi-only
#crash tab don't enable it
#debug.enabletr=true
Many thanks for your works Mavasilisk. It's perfect!! Just don't forget the "e" in Bizcuite :angel:
Upload of first BETA release is in progres
Don't forget, if you install my kernel, you will NOT be able to use others OS (except original Firmware with original kernel of course)
Maybe we must add "This release is not official and not supported by cyanogen".
Bizcuite
bizcuite said:
Many thanks for your works Mavasilisk. It's perfect!! Just don't forget the "e" in Bizcuite :angel:
Upload of first BETA release is in progres
Don't forget, if you install my kernel, you will NOT be able to use others OS (except original Firmware with original kernel of course)
Maybe we must add "This release is not official and not supported by cyanogen".
Bizcuite
Click to expand...
Click to collapse
Updated. Sorry, I was so focused so I missed "e" in your nickname. Cant wait to try the first beta!
Mavasilisk said:
Updated. Sorry, I was so focused so I missed "e" in your nickname. Cant wait to try the first beta!
Click to expand...
Click to collapse
First page updated in dev section.
Link updated
Bizcuite
Sent from my GT-N7100 using xda app-developers app
How is sleep with CM9? I used to find with CM7 Bull my tab used to use more power than stock Froyo when sleeping. Also how well does Chrome work with 256mb ram? Thanks.
I prefer Boat Browser. Its very fast and snappy with the new HW. I can compare it to Opera. Chome is just....not my taste.
Browsers
Mavasilisk said:
I prefer Boat Browser. Its very fast and snappy with the new HW. I can compare it to Opera. Chome is just....not my taste.
Click to expand...
Click to collapse
Yes Boat browser works best but is laggy on bigger pages and force closes when I try to start flash content - flash player is still not working. Other browsers force close on bigger pages and chrome is slow. Opera final still dont work, beta is working but freezes on first couple starts. Even stock browser freezes on first couple starts and crashed system once and then started to work pretty normal. Most interesting thing is with Puffin browsers, they worked well under 1.8 and now Puffin free cant even start and Puffin paid freezes or force close when I try to start some web address or edit speed dial. I edited vm heapsize but it didnt help. I am still suspicious on GPU driver. Rom is fast and many apps and games works but we still have some major problems. Keep up with good work Biz and I hope that we will get stable rom soon.
Biz, check for dalvik cache and cache errors. I had some problems with apps when I forgot to wipe caches.
WiFi
Mavasilisk said:
Biz, check for dalvik cache and cache errors. I had some problems with apps when I forgot to wipe caches.
Click to expand...
Click to collapse
I dont have problem with cache but you were right we still have problems with wifi driver, that is our major problem for now. I hope that Biz will find good driver and recompile it soon.
aleksandarvs said:
I dont have problem with cache but you were right we still have problems with wifi driver, that is our major problem for now. I hope that Biz will find good driver and recompile it soon.
Click to expand...
Click to collapse
I try both. Today i have try to compile the driver module from cm9 sources and with archos gen8 stock kernel.
Compilation success but the driver doesn't want to be insert. I have warning during compilation and this failed the insertion.
Can you say me which security you use to connect you to your wifi?
I think that there is an issue with wpa1/2 security.
Because when i am at work i have no pb, it's a free hotspot wifi without any security just a login.
Bizcuite
Sent from my GT-N7100 using xda app-developers app
I am using WPA-PSK-CCMP and I can make it crash pretty often.
Hi Biz,
congrats to your excellent your CM9 Build. It's pretty fast. However I have a A70S like Mavasilisk and also have the same problems. I can make the tablet crash and reboot with Angry Birds Space with WIFI enabled. However if I disable Wifi and reboot so that the systems boots with WIFI off I can play the game. After another reboot with WIFI enabled the game crashes again.
I have a completely fresh system with nes data_ICS and I'm on WPA WLAN encryption.
groovey2k said:
Hi Biz,
congrats to your excellent your CM9 Build. It's pretty fast. However I have a A70S like Mavasilisk and also have the same problems. I can make the tablet crash and reboot with Angry Birds Space with WIFI enabled. However if I disable Wifi and reboot so that the systems boots with WIFI off I can play the game. After another reboot with WIFI enabled the game crashes again.
I have a completely fresh system with nes data_ICS and I'm on WPA WLAN encryption.
Click to expand...
Click to collapse
TO ALL WHO USES BETA 2.0 (only 2.0 a 2.1 will be upload this evening), PLEASE CHANGE THOSE VALUES:
in /init.rc:
Code:
write /proc/cpu/alignment 1
The original value is 4
And in /system/build.prop:
search "vm.heapsize" and set the value to 192m
Crashes/Kernel Panic must be a REAL old story.
Bizcuite
bizcuite said:
TO ALL WHO USES BETA 2.0 (only 2.0 a 2.1 will be upload this evening), PLEASE CHANGE THOSE VALUES:
in /init.rc:
Code:
write /proc/cpu/alignment 1
The original value is 4
And in /system/build.prop:
search "vm.heapsize" and set the value to 192m
Crashes/Kernel Panic must be a REAL old story.
Bizcuite
Click to expand...
Click to collapse
This post was a wrong way
Jut edit init.rc and change the value of this line: write /proc/sys/kernel/panic_on_oops 0
Set the value to 0.
The will be really stable!!!
Bizcuite
Sent from my GT-I9003 using xda app-developers app
So alignment to 1 or 2 ?
Mavasilisk said:
So alignment to 1 or 2 ?
Click to expand...
Click to collapse
4
Bizcuite
Sent from my GT-N7100 using xda app-developers app
First page (OP) updated with How-to add swapfile guide!
Ok, Good tutorial this rom rocks.
FYO, after upgrade my swap to 1G and my cpu to 1200... Chrome style unusable. I Think our poor gen8 is style weak to it...
Regards,
Rabbit
Try with OC to 1100.