Mango 7720 error - Focus General

I ve been able to update all the way to 7712 want to get to 7720 when I run the provision tool or RCToRTM i get the following error message any help please.
Samsung Focus
UpdateWP version 4.7.1404
Error: The installed version of the tool (4.7.1404) needs to be updated to match the Zune version (4.8.2345). Please install the tool version 4.8.2345.

In order for this to work, your "Windows Phone Engineering Flashing Tool" version needs to match your Zune version exactly. It appears you are using the new Official Zune 4.8.2345.
When I performed this update I used a Flashing Tool version 4.8.2134, and I had a beta Zune that was also 4.8.2134. I would uninstall both programs and in the RCToRTM file their should be a Zune Beta and Flashing Tool installer. Install both of these and go to the ADD/REMOVE programs and verify that the versions match. If needed right-click on the ADD/REMOVE programs header and highlight the "Version" column if its not already viewable.

Related

[Custom ROM]RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33 b.50.10U by ansar

Dear forum members,
YES!!!
I successfully created my 1st custom ROM for the Mozart Windows Phone with the new HSPL by cotulla
I used as a base this ROM:
RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo_by_ansar
The custom build has the ability to be unlocked and to upgrade to MangoB2 thru zune
In my next build i will try to include mango and dfrouter for those not sync to zune
Thanks to my giant friends ervious, mamaic, bepe and cotulla
I hope to upload it today [edit: done] and some day to create an hspl too!!
///////////////////////////////////////////////
[CRI] Custom ROM Index for Windows Phone Mozart
///////////////////////////////////////////////
Download Link RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo_custom_by_ansar
///////////////////////////////////////////////
This ROM supports:
- Chevron unlock and
- MangoB2 update to 7403 and 7712 and
- does not include SPL in order HSPL to be retained
All other elements are as in stock relevant ROM of version HTC_Europe_1.30.401.01_5.54.09.21_22.33b.50.10U_NoDo
///////////////////////////////////////////////
The provided ROM can be flashed to all RSPL / HSPL supported operators:
- hTC_Asia / hTC_Asia_SEA / hTC_Europe / O2_UK / Orange_FR / Orange_UK
- SFR_FR / TELSTRA / TMO_AT / TMO_CZ / TMO_DE
///////////////////////////////////////////////
There are not known, yet, unsupported operators by RSPL/HSPL
///////////////////////////////////////////////
ROM installation instructions
To install the ROM follow these steps:
- install RSPL and select your ROM version X.YY
- install HSPL
- unzip the downloaded zip file and run ROMUpdateUtility.exe
///////////////////////////////////////////////
MangoB2 update instructions
To update in MangoB2 you must in your PC/Laptop:
- download my NoDo_Public_by_ansar.zip and Mangob2_Public_Trial_by_ansar.zip
- uninstall WPSupportTool-x86.msi or WPSupportTool-x64.msi and
- install Setup-UpdateWP-x86.exe or Setup-UpdateWP-x64.exe
- install StartZuneLocal.exe
///////////////////////////////////////////////
MangoB2 Chevron unlock instructions
A. To retain Chevron unlock on MangoB2 in 7403 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup after ROM flashing
- Sign in to Windows Live and
1. Run Marketplace, select HTC Apps and select Connection Setup
2. After relevant prompt Power off and then Power on your device
- Repeat above 1 and 2 to install Connection Setup
[End of optional steps]
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Deploy TouchXplorer.xap
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: do not run Connection Setup now
- Update to MangoB2 7403
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
B. To retain Chevron unlock on MangoB2 7712 perform the following in windows phone:
[Optional steps]
- Uninstall Connection Setup
- Run Marketplace, select HTC Apps
- You maybe wait some minutes for Connection Setup to appear
- When Connection Setup appears install it
[End of optional steps]
- Deploy my Update_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Run Connection Setup
- Deploy my Unlock_Mango_XBMODDeployer.xap
- Run XBMOD.Files.Deployer and uninstall it
- Run TouchXplorer and copy CustClear.provxml from My Documents\My Ringtones\ to \Windows
- Remember: not run Connection Setup now
- Update to MangoB2 7712
- Wait for update to finish
- Now disconnect from usb cable and enter SIM pin
- Now run Connection Setup
- Check that you are unlocked by running TouchXplorer
///////////////////////////////////////////////
Till next version enjoy!!
Regards, ansar
waiting for your mango build...
Thanhs ansar. Great your job!
Thank you!
Can't wait to flash!
use ansar's method to go all the way to RTM 7720 and Chevron unlock is still working (e.g., i can still use TouchXplorer). i basically repeated the steps for 7712 again for 7720. thanks!
followed all the instructions 30x everytime i update to isv beta 7403 the phone is relocked as when i try to use touchxplorer it say ms has revoked this app please uninstall ????? any help
I previously used "RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33a.50_RELEASE" which had a colour banding problem and upgraded that ROM all the way to MANGO RTM and the colour banding still remained which was very annoying having spent 2 hours+ completing the proceedure.
I've just flashed this version and I still have the colour banding issue.
When I tried the DFT 7113 ROM, it resolved the Colour banding issue.
Reply to ThreadThread: [Custom ROM]RUU_Mozart_HTC_Europe_1
thanks
Mirror?
Any mirror links? RapidShare is not so friendly in my area.
Whenever I clicked download, the page just refreshes itself. No download link, countdown timer or whatsoever.
here is a mirror by uploaded.to
http://uploaded.to/file/wdbndyqg
nice!
V8Turbo said:
here is a mirror by uploaded.to
http://uploaded.to/file/wdbndyqg
Click to expand...
Click to collapse
Thanks for the mirror!
Updated to 7720 with unlocked.. Wish i could change the accent colour though.
Anw, thanks ansar for the great work!
I also did the ansar unlock method for my mozart
when it is 7712 my touch explorer is working but registry editor is not opening at all
why it is?
Can any one help me..........
I am having problems getting to Mango (7720)...
I used this custom ROM, then did the update to 7403, its all good and still unlocked but Zune does not find any newer updates?
I have updated Zune to the latest version as well (4.8.2345.0).
Anyone with the same problem, anyone know how to get it sorted?
Thanks
Same for me so back to DFT 7714...
have u updated with update tool ............
then try update it will show update
I have done like that only and i updated.
i used in zune 4.8.2345
go2xraj said:
have u updated with update tool ............
then try update it will show update
I have done like that only and i updated.
i used in zune 4.8.2345
Click to expand...
Click to collapse
I am quite sure I have... Can you give me a link to the update tool just incase.
So I have Zune installed, then I run the update tool and then Zune will give me updates after 7403?
Do I need to have all of the Zune processes closed when I run the update tool - or just the zune.exe or does it not matter?
Thanks
You have to close the zune when update tool is running and I have attached one more thread.
Follow the instructions which is in this thread and try http://forum.xda-developers.com/showpost.php?p=16594869&postcount=2
go2xraj said:
You have to close the zune when update tool is running and I have attached one more thread.
Follow the instructions which is in this thread and try http://forum.xda-developers.com/showpost.php?p=16594869&postcount=2
Click to expand...
Click to collapse
AWESOME!!
Thanks soo much. After 3/4 hours I finally got it sorted.
So I reflashed with the custom ROM, uninstalled Zune and the update tool (Phone engineer flashing tool).
Then followed the guide you gave me and it eventually worked. Took forever to update to 7712 as the update seems biggish (150-250MB I am guessing) and installing it on the phone takes 45 minutes + easily.
Then my next problem was getting to 7720 - I had Zune 4.8.2345 where I needed version 4.8.2134.0 once I had that installed the bat file ran fine and phone updated to 7720 perfectly.
Also I suspect the reason it did not work the first time was due to the guide I was following. The mango unlocker files:
Unlock_Mango_XBMODDeployer.xap
Update_Mango.XBMODDeployer.xap
Note the one has the _ before the XBMOD and the other the . before the XBMOD - the guide I was following never said I needed to use the one with the . and that is the only thing I can of which may have made a difference (Although the zune versions may have made a difference).
Thank you for your reply and one more thing I can tell you is that u can update through Zune 4.8.2345
Regards
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Mmm good news. I will maybe try if someone reply to this please:
- Is HTC application working; like Accent Theme changer, Registry editor or TouchExplorer etc... ?

[Q] How to get the latest Mango official release

So it's out, but only for some users.
Im currently with NODO and doest want to mess with the back to the future procedure.
Zune tells me my phone is up to date.
I have tried the disconnect trick - no success.
Anyone here managed to get it to work?
I'm in the same position, same phone set up and rom, just tried the Zune trick about 30 times and no joy. Am UK based on Virgin. The suspense is killing me
Me too
I've tried the trick with both with WIFI, and Cellular stick several times.
I'm from Israel on Orange.
Do you think carriers have something to do with that?
same here US T-Mobile
The "back to future" process has been simplified making it less risky if i may put. I wasn't too sure of myself either whether i could get it done. But then after several reviews found it simple and got it running.
Amoah said:
The "back to future" process has been simplified making it less risky if i may put. I wasn't too sure of myself either whether i could get it done. But then after several reviews found it simple and got it running.
Click to expand...
Click to collapse
What exactly do you mean by simplified? I installed Back to the Future V 2.0 and connected to Zune and let it update to 7392. I didn't want to mess around with all that other stuff. It was too confusing and I decided to just wait for the official release. So, since I just have 7392, which I installed via Zune, over the foundation of Back to the Future ROM, I assume that I will be able to update to Mango via Zune too...am I right here?
Goy it!
I was missing 2 things:
1. Device provisioning cab
2. patiance at the 6th step (Restarting) it takes alot of time
I don't know if this is a help to your problem but try to change your location to the US in zune profile. I did this and got no problem updating the rom through Zune.
Sent from my HD2 using XDA Windows Phone 7 App
OMAC1A said:
What exactly do you mean by simplified? I installed Back to the Future V 2.0 and connected to Zune and let it update to 7392. I didn't want to mess around with all that other stuff. It was too confusing and I decided to just wait for the official release. So, since I just have 7392, which I installed via Zune, over the foundation of Back to the Future ROM, I assume that I will be able to update to Mango via Zune too...am I right here?
Click to expand...
Click to collapse
Yes you are right but since I didn't opt for that I can say much about that.
This is what i did to get to 7720 RTM Yuki-Xbmod
since you are on 7392 i believe you know the beginning.
What you need:
Yuki native v2 (7004)
7004-7720 (one shot)
wp7 update cab sender.zip(wp7 cabsenderwinxpfix.zip -if you're using win xp-read further on this in the thread)
Device provisioning.cab
You must have zune
All in first post of Yuki-Xbmod "Back to Future"
Steps:
1.Install Yuki native v2 (7004)
2.Follow on screen instructions and set time zone,date and time.
NB:make sure it corresponds to that on the PC
3.leave the phone on don't power off,connect USB from PC to phone-
**Time to install 7720**
4.At PC, enter wp7 update cab sender folder
5.Go to "if needed install this tool" folder
6.Install setup - update wp(x64 for 64bits windows or x86 for 32bits windows)
NB:You can verify this at the Device manager on the PC
7.Copy device provisioning.cab to wp7-update-cab sender folder. Important,please don't extract this(device provisioning cab)
8.Run wp7 update cab sender.bat
9.Then on the PC keyboard,type s-(s)end cabs to device
10.After finished installing close wp7 update cab sender
11.Delete device provisioning.cab (ie. the one you copied into wp7 update cab sender)
12.Open wp7 7004-7720-patch.zip
13.Copy all the cab files to wp7 update cab sender folder
14.Run wp7 update cab.sender.bat again
15.As usual type s-(s)end cabs to device
NB:I believe it depends on you SD Card it should take about 1hr to 2hrs. In my case 1hr.
16.After installation reset your phone (ie. Go to about) it's important.
17. YOU ARE DONE. YOU NOW HAVE RTM 7720 YUKI-XBMOD
You can now proceed to do the official thing if you like.
Amoah said:
Yes you are right but since I didn't opt for that I can say much about that.
This is what i did to get to 7720 RTM Yuki-Xbmod
since you are on 7392 i believe you know the beginning.
What you need:
Yuki native v2 (7004)
7004-7720 (one shot)
wp7 update cab sender.zip(wp7 cabsenderwinxpfix.zip -if you're using win xp-read further on this in the thread)
Device provisioning.cab
You must have zune
All in first post of Yuki-Xbmod "Back to Future"
Steps:
1.Install Yuki native v2 (7004)
2.Follow on screen instructions and set time zone,date and time.
NB:make sure it corresponds to that on the PC
3.leave the phone on don't power off,connect USB from PC to phone-
**Time to install 7720**
4.At PC, enter wp7 update cab sender folder
5.Go to "if needed install this tool" folder
6.Install setup - update wp(x64 for 64bits windows or x86 for 32bits windows)
NB:You can verify this at the Device manager on the PC
7.Copy device provisioning.cab to wp7-update-cab sender folder. Important,please don't extract this(device provisioning cab)
8.Run wp7 update cab sender.bat
9.Then on the PC keyboard,type s-(s)end cabs to device
10.After finished installing close wp7 update cab sender
11.Delete device provisioning.cab (ie. the one you copied into wp7 update cab sender)
12.Open wp7 7004-7720-patch.zip
13.Copy all the cab files to wp7 update cab sender folder
14.Run wp7 update cab.sender.bat again
15.As usual type s-(s)end cabs to device
NB:I believe it depends on you SD Card it should take about 1hr to 2hrs. In my case 1hr.
16.After installation reset your phone (ie. Go to about) it's important.
17. YOU ARE DONE. YOU NOW HAVE RTM 7720 YUKI-XBMOD
You can now proceed to do the official thing if you like.
Click to expand...
Click to collapse
Wow Nice guide fella,Much appreciated
Did you leave sd card in there throughout?
Im in same position as others i updated through zune until nodo waiting for official mango but keep getting phone is up to date
Can i just reflash native v2 rom over nodo( try the one shot method) or do i need to do anything with sd card unlock, reformat?? Thanks
itaysk said:
Goy it!
I was missing 2 things:
1. Device provisioning cab
2. patiance at the 6th step (Restarting) it takes alot of time
Click to expand...
Click to collapse
Please can you explain further ? Did you just transfer devicepro.cab, reboot phone and find update through zune?? What steps did u take
Moschino02 said:
Wow Nice guide fella,Much appreciated
Did you leave sd card in there throughout?
Im in same position as others i updated through zune until nodo waiting for official mango but keep getting phone is up to date
Can i just reflash native v2 rom over nodo( try the one shot method) or do i need to do anything with sd card unlock, reformat?? Thanks
First It's stated in the Back to Future threads that others have same issues. I think I even saw a post with tweeter link stating you can't get it done with 7392.
Second,I'll advise you start with stock Rom.Safety First. Try and get the SD card unlocked and formatted and follow the earlier guide and I bet you'll in no time have Yuki-Xboxmod RTM 7720.
And my SD Card was in phone from beginning to end. No problem at all.
Click to expand...
Click to collapse
Error 800B010A - You can try this
Heya,
I tried to update our beloved HD2 today...well I got the dammit 800B010A error all the time (approx. 15 times). I tried the USB update thingy but no success.
If there are still people out there who are struggling with the error:
After checking for USB drivers you can try to:
1. Take out your SIM card!
2. Increase the "reserved space/storage"! (I'm on german zune, so I don`t know the correct wording). You find this when you are in Zune (on Desktop PC) under Device - Settings.
At least the update directly worked for me after increasing the space from 5% to 15%.
Take care.
Ric

[q] tool version dosent match !!! Hd2

hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
cmully said:
hi all
tried to find answer myself but couldnt find anything related my problem is ive flashed the new xboxmod + yuki wp7 rom (7004) done every thing to letter it gets two updates from zune to (7392) then i tried to send cab files and it fails with this massage " installed version of zunewmdu <4.8.2345.0> dosent match tool version <4.8.2134.0>
now zune tries to update to mango beta 7403 and fails with error code 80180005
any help would be great plus im not a developer i just eat what the chefs here provide so i not sure what u need to know from me plus if this has been solved elsewhere sorry and pls point me to it
many thanks in advance
Click to expand...
Click to collapse
in the cab sender, there should be 3 folders, one of them says if needed, install this tool. try installing that (there is 1 32bit and 1 64bit so just install the one for your system). also make sure the cab sender app stays in the same folder as those 3 folders. so in the WP7 Cab sender folder (or whatever the main folder is called)you have:
FOLDER: if needed install this tool
FOLDER: logs
FOLDER: tools
and the WP7 Update Cab Sender.bat file
thanks gonna TRY NOW ill report back
hi
just tried again and it returned a new message (as below) am i missing something.
and y does it want to update me to 7403 isnt it supossed to update to 7220 first as zune already updated me to 7392 ????
thanks again
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180011, error message: IU (Image Update) installation failed on phone: None
of the packages in the update are applicable.
■
╚══════» Done
Press any key to continue . . .
thought id cracked it tried to install mango rtm cabs and this come back if this is any help
think i might start again if so do i need to task 29 or can i just re flash the rom
Name: HTC HD2
KITLName: QSD8XXX07185665
Manufacturer: HTC
ModelId: 1
Model: HD2
MobileOperator: 000-00
Version: 07.00.07392.03-00.00.00000.00-00.00.00000.00
Error:
Update device 7938612c - b493e145 - 90cfab34 - dc9e259e Complete with error code
: 80180005, error message: IU (Image Update) installation failed: The update pac
kage isn't a valid CAB file.
■
╚══════» Done
Press any key to continue . . .

[Q] Dell Venue Pro; Update failed, recover not successfull

Hello there,
my "new" Venue Pro arrived yesterday and i just started to test it.
It had a very old firmware, not even mango ... so i startet updates by zune.
After the third update (for wlan problems, i think it was the "latest" wp7 update) i get an error .... so i restartet the phone an tried again, no success.
I read a lot, not even the microsot update tool could help. So i startet the recover in zune over settings, updates.
The update startet and now i always get an error by 61%. I read a lot again, i even tried to backup it from another comuter (copied image %appdata%\Microsoft\Microsoft Phone Update) but the same problem.
So, my "new" phone doesent start any more ... it just loads to the bootloader ...
I tried to get any offiziel firmware to flash the device to "standard" but i seams hat MS dont want this.
I knew a little bit about flashing WM6 devices (HSPL & custom fw) but with WP7 devices i dont really understand what to do in this situation.
I hope you can help me! Can i download the dell firmeware someware to recover the phone? maybe someone have a "personal recover firmware" for me?
Thx
If your device can load into download mode (that you called "bootloader") it can be restored to 7004 T-mobile branded version and later update to 7720 via Zune. This is only one available firmware on the public.
Look at this thread: http://forum.xda-developers.com/showthread.php?t=1411300
THX!
I will try ... downloading ...
So, i downloaded VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP0030_RV001_RETAIL.ffu and thought, everthing is getting fine.
But i had no idea how i can install this!
I´m reading hours and hours, tried to use UpdateWP.exe (crash on 2 computers, where NO MS Support tools are installed), Windows_Phone_7_Backupv1.9, MangoB2-ZuneClient, Zune 4.7 .... no success.
Could sombody please tell me, how i can install this on Windows 7 x64? I dont know what to do ...
I get this message when i try to updatewp it;
Unhandled Exception: System.TypeInitializationException: The type initializer fo
r 'wm7update.Program' threw an exception. ---> System.IO.FileLoadException: Coul
d not load file or assembly 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0
.0, Culture=neutral, PublicKeyToken=ddd0da4d3e678217' or one of its dependencies
. The located assembly's manifest definition does not match the assembly referen
ce. (Exception from HRESULT: 0x80131040)
File name: 'Microsoft.WindowsMobile.DeviceUpdate, Version=7.0.0.0, Culture=neutr
al, PublicKeyToken=ddd0da4d3e678217'
at wm7update.Program..cctor()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\M
icrosoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure lo
gging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fus
ion!EnableLog].
--- End of inner exception stack trace ---
at wm7update.Program.Main(String[] args)
See also here: http://forums.create.msdn.com/forums/p/85864/516966.aspx
As i said before, there is no (more) Microsoft Update Software on my computer and on the second there never was it.
Mybe i could handle it with the "MangoB2 Updater" .... but i cant download this anywhere.
I really have no luck :-(
Do not panic yet. You have different versionsof zune or updatewp /missing files
Deinstall everything related to zune.DONT TOUCH EVERYTHING RELATED TO MS SUPPORT TOOLS, IF ITS INSTALLED IT DOESNT INFLUE ON PROCESS!!!
Install Net framework 3.5, 4;
Install Zune(take it from zune.net);
Install wp7 updatetool from zip attached here here http://forum.xda-developers.com/showthread.php?t=1306415 with proper x64 file.
Follow those steps after connecting device in download mode:
Extract command prompt to C:\program files\zune\
go to directory to “C:\program files\zune\ and run Command prompt. Type in : “UpdateWp /list” and your phone should show up there.
If your phone is listed (it should be) and your download is done and extracted, copy the VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu file over to the” C:\program files\zune\” directory.
Type in: “updatewp /ffu VenuePro_flash_GLEOS2A_US_TMO_SIGNED_SWV0105_LP003 0_RV001_RETAIL.ffu” enter, update should start.
YES IT WORKS!
Great, now i can start my dell venue pro again and even updating is functional.
But why can´t i change the display language? I tought i´m able to change the display language in this roms? In all WP7 phones (in germany) i could change the language at the first start (and after a reset).
*argh!*
On this site i found language packs, but that is a little bit ... argh?!
http://forum.xda-developers.com/showthread.php?t=1306415
so it´s over ... i send the phone back ...
Thank u very much 4 helping.

[Q] Update Unsuccessful When Using CAB Sender

I have attempted to install the 8862 Update via CAB sender on Yuki's ROM and Dynamics 8852 and after installing the update the script shows "Restarting Phone" and the HD2 boots into WP7 and says that the update was failed, I have seen a few sucess stories on this, what could be the problem? (Windows 7 x64, HD2 Dynamics ROM, any other info you need just ask!)
Error:
Update device 05f33ccd - 2cb7d1fb - 5284bf4a - 280015f4 Complete with error code
: 80070070, error message: There is not enough space on the disk.

Categories

Resources