Hello, I am a flashing noob so please bear with me! I have a CDMA HTC Touch with Cellular South. It was locked and running radio 2.32.
I was able to unlock it to coker 2.31 and it powered up fine after that. Then following these instructions (http://forum.xda-developers.com/showthread.php?t=592964). After that i tried to load the stock radio for sprint so i can get the radio update for the GPS. Well I was able to active sync and start the load and it stopped. i tried again and it would not load it. This was the load from the HTC site. Sooo....I went to load this ROM (http://forum.xda-developers.com/showthread.php?t=711839) and it flashed fine. But then during reboot it stops on the black screen that shows the version and shows the load but then underneath the load it says "no radio".
Because of this I cannot sync the device and of course I cannot get to the home screen. I can however load another ROM but same thing, no radio. What did I do wrong and how can I load a radio load through bootloader? Or a ROM that has a sprint load in it other than the stock sprint rom from the site that needs to be sync'd?
Thanks,
Simtech2
Related
I have been trying to go back to a stock rom so I can sell my mogul.
I'm trying to follow the directions here.
http://wiki.xda-developers.com/index.php?pagename=TitanStockHome
I got to relocking part and to the point where it tells you to disconnect and reconnect the usb.
I did this but couldn't get the phone to activesync again. I tried going through the rest of steps but ended up getting stuck at the bootloaded screen.
I'm on XP trying to go back to Sprint's 3.35.651.2 (Radio 3.35.04).
I'm currently on one of No2chem's rom.
I have no idea where to go from this point. Any help would be great. Thanks
PLease supply you current radio, rom, and bootloader version
Thanks for your help.
However, I have no idea how to get that information for you.
I'm guessing there's a exit bootloader I need to run???
When the phone first turns on does it go straight to bootloader? What version does the bootloader say?
Yes straight to bootloader.
TITA100
SPL-1.06.0000
CPLD-9
at the white part it says Serial then USB when I plug the usb in.
I think you need the 2.xx boot loader for the GPS radio. Try this Relocker:
http://www.nuerom.com/BlogEngine/page/nueSPLnueSPL-ReLocker-for-the-HTC-Titan.aspx
Sorry, I'm pretty noob. I need specific steps. lol
Right now, I'm still stuck in the bootloader screen.
What do I do to get out?
Where do I get the 2.xxx bootloader and how do I run it? I'm totally lost now.
Ok, so your stuck in boot loader with a pre-gps boot loader. Download this rom/radio and flash:
ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh
That will bring you back to stock pre-gps rom. Then you should be able to go straight into flashing the official upgrades from Sprint, if you wanted to.
Thanks. I'll try it now.
I'll ya know it it works.
I tried flashing to that rom/gps you gave me. Here are the steps I took:
-Placed file in to RUU folder
-Ran RUU
-Went through the steps and clicked "Update"
-It says it will update to: "Image Verision: Sprint_2.16OS.O
At the updating screen with the % bar it stays at 0. After 1-2 mins it gives me the "ERROR [262]:Update error" then ask for me to go through the steps to recover. I go through the recovery steps and try to flash again and get the same problem.
Error 262 means it is having problems connecting, not sure why. Instead of trying to relock, lets try unlock for now and then go back to relock.
Here is a GPS ROM unlocker. Give this a try and should bring you back to where you started. DO NOT use the relocker you used.
I'll try that out.
After I get back to where I started.. I read somewhere i can just download the exe. file from htc and upgrade without relocking? is that true?
I have flashed the stock Sprint rom with the phone unlocked. The only reason I can see to relock is for warranty reasons. I have shipped phones back to verizon with custom roms, nothing was ever said
You should try to flash this rom. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.17_OS_RUU_signed.rar
You can try putting in ruu but I suggest you flash by sd card. Name .nbh to TITAIMG.nbh. then place on 2gb or smaller sd card and turn on phone. Once bootloader reads card it should say loading start the process.
tookays2k said:
I tried flashing to that rom/gps you gave me. Here are the steps I took:
-Placed file in to RUU folder
-Ran RUU
-Went through the steps and clicked "Update"
-It says it will update to: "Image Verision: Sprint_2.16OS.O
At the updating screen with the % bar it stays at 0. After 1-2 mins it gives me the "ERROR [262]:Update error" then ask for me to go through the steps to recover. I go through the recovery steps and try to flash again and get the same problem.
Click to expand...
Click to collapse
I made an assumtion here, just wanted to check, you are in bootloader when you try to run ruu, right?
If you still cant't drew is right, but the rom (non-gps) on sd card and it will load.
Yes, I'm in bootloader (the tri-colored screen). I'm still stuck in it.
I tried flashing through SD card as well. Here's what I did just incase.
-Used 1GB card
-Formated FAT32
-Renamed the file here ftp://up.ppcgeeks.com/Titan/Users/Im...RUU_signed.rar to TITAIMG.nbh.
-Moved the file to the card and is the ONLY thing on the card
-Inserted in the phone
NOTHING HAPPENS
The only time I can get it out the bootloader screen is when I'm flashing with the RUU. It goes to the white screen with the % bar but then gets frozen there.
I tried using that Relocker but it wouldn't run.
Please provide your bootloader, rom, and radio version
TITA100
SPL-1.06.0000
CPLD-9
I don't know what my rom and radio is...
All I know is that I was on one of no2chem's roms. And tried using that "back to stock" wiki guide.
Well I assume you have a gps rom with a nongps bootloader. You need a bootloader version of 2.xx. Please list your carrier. Also radio and rom versions are listed on bottom right of screen when you turn it on.
It goes straight to bootloader when i turn it on so I can't tell whar rom it is.
I was using sprint but I have cancelled my service.
I have HTC HD2 from T-mobile.
Decided to flash it.
Hard SPL 2.08 is installed.
Started with a radio. Enterd the bootloader, connected it with the PC, everything was fine, but in the end a messadge came up that it could not update the software. The device whent dark, and now an all attemps to enter the bootloader it shortly vibrates and that all, the screen remains black.
Please, tell me how to reanimate it.
DarkPaLadin said:
I have HTC HD2 from T-mobile.
Decided to flash it.
Hard SPL 2.08 is installed.
Started with a radio. Enterd the bootloader, connected it with the PC, everything was fine, but in the end a messadge came up that it could not update the software. The device whent dark, and now an all attemps to enter the bootloader it shortly vibrates and that all, the screen remains black.
Please, tell me how to reanimate it.
Click to expand...
Click to collapse
can you give more info please,
what radio did you flash and what rom?
thanks
Like I said it's HTC HD2 from T-mobile.
I've recieved it unlocked with ROM "Moon light 1.23" and Hard SPL 2.08 is installed.
Moon light had some bugs and I've decided to flash the device with "HTC_Leo_WWE-djet". Install went fine but the device refused to load futher then the screen with "Stick Together". I was told that it is becouse of old version of radio, so I've dowloaded "Leo_RADIO_15.28.50.07U_2.05.51.05_2.nbh" and tried to install it.
And faild. Please advise.
DarkPaLadin said:
Like I said it's HTC HD2 from T-mobile.
I've recieved it unlocked with ROM "Moon light 1.23" and Hard SPL 2.08 is installed.
Moon light had some bugs and I've decided to flash the device with "HTC_Leo_WWE-djet". Install went fine but the device refused to load futher then the screen with "Stick Together". I was told that it is becouse of old version of radio, so I've dowloaded "Leo_RADIO_15.28.50.07U_2.05.51.05_2.nbh" and tried to install it.
And faild. Please advise.
Click to expand...
Click to collapse
Hi. did you actually try downloading directly from your local HTC website the last original ROM inserting the serial number from your HD2?
if you took off the battery and put it back, when starting your device pressing down volume key and power on at the same time.. does it enters to bootloader?
if it enters to bootloader, consider trying a task29 cleaning and only then flash the ROM.
DarkPaLadin said:
I have HTC HD2 from T-mobile.
Click to expand...
Click to collapse
If you have a USA tmobile, (tmous) then radio 2.05.51.05 has killed it and it is dead.
DOes it say tmobile on the case? does it have green send key and red end key? (all other hd2 have all white keys)
Hello, I want to unistall the eng SPL, the custom cyanogenmod recovery and ROM and the updated radio that I installed on mu HTC Hero GSM, and go back to all original HTC 2.1 Eclair unrooted.
It is possible? How can I do this?
See here : http://theunlockr.com/2009/10/03/how-to-unroot-the-htc-hero/
and do a firmware upgrade to 2.1
OR
find yourself a 2.1 RUU and do the steps in the link with this one
I have already tried that, but the programs pauses saying "waiting for bootloader" and then stops saying "USB connection problem".
The phone hangs on the bootloader screen.
I think the problem is the eng SPL, how can I revert to original SPL before trying again?
Even HTC sync doesn't see the phone
I found and installed a 1.76.0004 locked SPL, but nothing changed...
I tried to start the RUU file and thenm when the process stops on the bootloader screen, start again the proces from here, the process continues for a while, but then says the ROM is incorrect for the phone...
Ok, I finally did it, I luckily found and downloaded a 3.32.405.1 RUU installer and it worked, after repeating twice the process of updating.
Now I have all original!
You can close the thread!
Flashed ROM Froyo 2.2 (on MicroSD). Ran HaRet.exe and runs for about 2 seconds and then switches to HTC logo screen. I've tried it again and again and still have the same results. SPL 2.08. Am I doing something wrong? Do I need to update the hardspl to a different version?
Ps...please don't get angry if this is the wrong forum. I searched and could not find a solution.
You need to flash a compatible radio first, one with .50 in it, check the winmo section for more info
Flashed LEO 2.12.50.2. Same results-stuck on logo screen.
DAmmit! I can get to the bootlog screen but phone itself wont' boot up.
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
I followed step one with hspl and got the We've hacked it message
Next stage is radio flash via Custom RUU
I run the RUU and the install hits 100% (only takes about 30seconds to flash not the ten minutes stated on the dialogue screen on the pc)
the problem is the phone reboots to the white screen with Green HTC logo and freezes at this point. It doesnt run a full reboot.
When I try to reflash the RUU fails.
Could this be a faulty radio image? If so can some one post a link to a mirror for the best radio for the HD2?
I will try the other suggestions of different usb ports etc.
BTW I am using the latest Win mobile Center and have the RUU running as administrater.
Many thanks
Gurry
Click to expand...
Click to collapse
Here's the radio you want dude:
http://www.multiupload.com/QP0IWGY42F
reply back if having problems or pm me.
matt
Hmmm, few questions........
What kind of HD2 do you have.. US, European??
What radio do you currently have?
What radio are you trying to flash?
Can you get to bootloader (3 coloured screen) by turning on while holding vol. down?
gurry said:
Hi there
Im struggling with my flashing ... oo er
Im following the guide to flash android to the hd2
Click to expand...
Click to collapse
Can you enter Bootloader Mode and verify that your HardSPL install completed successfully and that you now have SPL-2.08.HSPL on the second line.
If that is ok then try flashing the Radio using the SD Card method as stated in my flashing guide (renaming the nbh file to LEOIMG.nbh copy to the root of your storage card and reboot into bootloader mode).
Mark.
Im confused now - I did the update again after flashing a stock rom via the sd card method. The radio updated and the rom started the self set up sequence.
I removed the battery - re ran hspl loaded fine,
confirmed its installed rebooted fine to rom rom.
powered off back into boot loader ran custom ruu - the progress bar ran to 100%. Phone rebooted and again is stuck at the green htc logo on the white backgroud with no radio details in the bottom left hand corner?
I re downloaded the file for the radio so ts wasnt corrupted.
Ill try the leoimg.nbh method see if that works.
WELL Thanks to the replies and starting AGAIN from scratch and updating the radio the sd card way Ive gotten it all working.
thanks for all the info.
Sometimes a little patience and a fresh pair of eyes so to speak - works wonders
Gurry
What radio? Cos the symptoms sound like what happens when you load a 51 radio with a 576 enabled rom.... ie it hangs at RGD info screen without any RGD info showing.