Related
I previously thought I had rooted and tried out a some custom ROMs. Decided to revert to a nandroid backup of stock I made before flashing but got errors and the phone hangs on 1st mytouch logo. S is off according to hboot screen, and I am able to get into fastboot and recovery (with CWM 2.5.1.2). I've tried using my nandroid backup and its gives an error: "E:format_root_device: can't find mmc partition "boot"". I've successfully rolled back from a custom ROM to stock before, So I'm not sure what happened. I have also tried having hboot flash PDIMG15 but when it begins it skips a bunch of folders, it gives me an error about E: , it says "FAILED (remote: not allowed)". Does that mean s is on somehow or root is screwed up? At this point I'm afriad I will have to go back to t-mob and buy a new phone . Any help is appreciated. Thanks.
Did you go from cm6 to cm7?
Try flashing a cm6 rom, you cant use clockwork 2.5.12 for cm7 roms and you cant use cw3+ for cm6 roms.
Flash cm6 from recovery then update clockrom in rom manager. The boot in recovery and flash cm7
enciso said:
I previously thought I had rooted and tried out a some custom ROMs. Decided to revert to a nandroid backup of stock I made before flashing but got errors and the phone hangs on 1st mytouch logo. S is off according to hboot screen, and I am able to get into fastboot and recovery (with CWM 2.5.1.2). I've tried using my nandroid backup and its gives an error: "E:format_root_device: can't find mmc partition "boot"". I've successfully rolled back from a custom ROM to stock before, So I'm not sure what happened. I have also tried having hboot flash PDIMG15 but when it begins it skips a bunch of folders, it gives me an error about E: , it says "FAILED (remote: not allowed)". Does that mean s is on somehow or root is screwed up? At this point I'm afriad I will have to go back to t-mob and buy a new phone . Any help is appreciated. Thanks.
Click to expand...
Click to collapse
PDIMG15 should be foolproof.
Have you checked the file or your sd card for errors?
Sent from my HTC Glacier using XDA App
I agree that PDIMG should be foolproof. It may be your SD card. Try re-flashing recovery through fastboot, then reformatting your SD card. Then copy the PDIMG again with nothing else on the card and give that a shot. You could also try flashing CWM 3 and see if you can flash a 2.3 ROM.
phone replaced
I tried the sd card format method with a quick format and a normal and still no success. Maybe a bad sdcard. Either way walked into t-mob and naively said my phone doesn't work, got it replaced. (Only had it for 9 days) Since it was still within 14 they swapped it no questions asked really. Thanks for the help either way. I may just have to stick with stock sense for a while and just be content with launcher pro. I've been reading that the front facing camera doesn't work on a lot of custom roms anyway and my wife and I both got MT4gs so I like the video call feature enough to stick with it.
I too had the same problem, what I did was to use the Nandroid backup located here in the MT4G forums. I have that on my sd card and when all failsI revert back thru that nandroid backup. Try that and let me know how it goes.
**edit**
sorry did not read that you had returned it.
HELP!
My sister has a T-mobile htc mytouch 4g and she cannot get it passed the booting screen. i have an epic 4g and when mine does things like this i can just odin it back to stock......i dont know anything about this phone sad to say. i do know that when i press the volume down, power button, & the middle button (idk what its called), the information above reads
Glacier PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
i read somewhere that the whole "S-On" thing is of some importance but that it should say S-Off,
i just need to be directed to a wiki or something so i can fix it.
NikieFurrz said:
My sister has a T-mobile htc mytouch 4g and she cannot get it passed the booting screen. i have an epic 4g and when mine does things like this i can just odin it back to stock......i dont know anything about this phone sad to say. i do know that when i press the volume down, power button, & the middle button (idk what its called), the information above reads
Glacier PVT SHIP S-ON
HBOOT-0.86.0000
MICROP-0429
RADIO-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
i read somewhere that the whole "S-On" thing is of some importance but that it should say S-Off,
i just need to be directed to a wiki or something so i can fix it.
Click to expand...
Click to collapse
There are methods for turning S off if you click on the link to the resource bible in my sig↓↓
Do you know if the phone is rooted, if there is a recovery flashed and what ROM it has?
halfcalf said:
There are methods for turning S off if you click on the link to the resource bible in my sig↓↓
Do you know if the phone is rooted, if there is a recovery flashed and what ROM it has?
Click to expand...
Click to collapse
ok thanks, ill check there, but no its not rooted ''/
NikieFurrz said:
ok thanks, ill check there, but no its not rooted ''/
Click to expand...
Click to collapse
If her phone is not rooted and you arent trying to flash custom ROMs then it doesnt sound like s=off is going to help you.
Ive seen this happen as a hardware problem (probably from dropping the phone to much) and also software, somehow the boot file gets corrupt
If you cant get her phone to get passed the first tmobile boot screen i would suggest you try to reset the phone.
1. Turn the MyTouch 4G off. pull the battery and replace it.
2. Press and hold the Volume Down button.
3. Press and hold the Power button for 5 seconds (while holding the volume down button) then release the power. Continue to hold Volume Down.
4. When you see the Android logo appear, you may then release Volume Down.
5. Now use the Volume Up/Down buttons to highlight Factory reset.
6. Press the Power button to select.
She will lose all data stored on the phone (not the sd card, just the phone) however if the phone isnt turning on that data isnt much good anyways...
halfcalf said:
If her phone is not rooted and you arent trying to flash custom ROMs then it doesnt sound like s=off is going to help you.
Ive seen this happen as a hardware problem (probably from dropping the phone to much) and also software, somehow the boot file gets corrupt
If you cant get her phone to get passed the first tmobile boot screen i would suggest you try to reset the phone.
1. Turn the MyTouch 4G off. pull the battery and replace it.
2. Press and hold the Volume Down button.
3. Press and hold the Power button for 5 seconds (while holding the volume down button) then release the power. Continue to hold Volume Down.
4. When you see the Android logo appear, you may then release Volume Down.
5. Now use the Volume Up/Down buttons to highlight Factory reset.
6. Press the Power button to select.
She will lose all data stored on the phone (not the sd card, just the phone) however if the phone isnt turning on that data isnt much good anyways...
Click to expand...
Click to collapse
once i do that three androids appear on skateboards lol and it wont go anywhere from there. i think this phone may be completely screwed.
NikieFurrz said:
once i do that three androids appear on skateboards lol and it wont go anywhere from there. i think this phone may be completely screwed.
Click to expand...
Click to collapse
What do you mean by "wont go anywhere"? When you hold down volume and power you should get a screen with three androids on skateboards on the bottom of the screen. Near the middle of the screen there should be some options
Fastboot
Recovery
Factory Reset
Simlock
System Info
Image CRC
You should be able to use your volume buttons on the side of the phone to scroll up and down through that list. when you have the option you want highlighted (in this case factory reset) you can selected it by pressing the power button.
are you able to do that, or are you stuck somewhere else?
Please help out as well i have same problem but even after trying to factory reset it still goes into hboot screen. Problem is on a spare phone just need help asap. If you can help i can attach gmail or gtalk or something. Please help tho
Markus214 said:
Please help out as well i have same problem but even after trying to factory reset it still goes into hboot screen. Problem is on a spare phone just need help asap. If you can help i can attach gmail or gtalk or something. Please help tho
Click to expand...
Click to collapse
It sounds like your problem may be different. When you turn your phone on is it automatically going to the hboot screen? Do you have a mt4g? your sig says you have a mt3g slide
halfcalf said:
It sounds like your problem may be different. When you turn your phone on is it automatically going to the hboot screen? Do you have a mt4g? your sig says you have a mt3g slide
Click to expand...
Click to collapse
I'm not sure what the problem is really here i havent started diggign yet i assumed it was needed the pd15img file it is s on i can get into recovery though and yes i havent updated sig in a little bit can you please help though
Markus214 said:
I'm not sure what the problem is really here i havent started diggign yet i assumed it was needed the pd15img file it is s on i can get into recovery though and yes i havent updated sig in a little bit can you please help though
Click to expand...
Click to collapse
what is the problem you are seeing? When you turn your phone on does it go right to hboot? does it boot up? does it freeze up at the first splash screen? does it freeze at boot animation? does it get to the boot animation then reboot?
When the power button is hit it goes right into hboot no options to let me go to home screen. I can access fastboot and hboot but i cannot get past these two at all i know the phone is not rooted. the volume keys are acting up a little bit and not letting me get anywhere. If you can help please PM me it would be greatly appreciated
Your volume keys are stuck (physically or electrically), specifically VolumeDown key, and that's the reason for the misbehavior. In any case, it's almost certainly a HW problem.
Thats what i've been thinking as well and tried seeing whats going on and it doesnt seem that there stuck have to pull some stuff apart in any case do you know how to fix this though and get it to boot?
If you don't have warranty - open the phone and fix/disconnect the volume buttons.
If you have warranty - send it for repairs.
It won't boot when VolDown is pressed, whatever you do.
[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU
HELLO ALL,
I USED THIS LINK http://forum.xda-developers.com/showthread.php?t=858996
TO ROOT MY MY TOUCH 4G PHONE AND IT WORKED FINE UNTIL I ATTEMPT TO INSTALL OVERCLOCKING SOFTWARE FROM>>>
http://theunlockr.com/2010/12/14/ho...ted-s-off-t-mobile-mytouch-4g-or-t-mobile-g2/
AND AFTER DOING WHAT THEU SAID MY PHONE JUST ACTED CRAZY/
EVERYTIME I TRIED TO TURN THE PHONE ON IT VIBRATES CONTINUESLY AND NEVER GETS TO THE OS. SO I LEFT IT ON FOR NIGHT LIKE THAT AND I WOKE UP IN THE MORNING OBVIOUSLY BETTERY WAS COMPLETLY DRAINED ( AFTER ALL THE VIBRATING BACK AND FORTH)
ANYWAYS, NOW IT JUST TURNS ON AND STAYS AT " MY TOUCH 4G SCREEN WHERE ITS WHITE AND THAT WRITING" IT JUST FREEZES.
IF I TRY TO HOLD VOL DOWN AND CLICK POWER BUTTON, I GET TO THE PAGE WHERE ITS WHITE AND FASTBOOT, RECOVERY, FACTORY RESET,SIMLUCK,IMAGE CRC MENU.
I HAVE TRIED EVERYTHING IN THAT MENU INLUDING FACTORY RESET, NOTTING WORKS.
WHEN I ALSO TRY RECOVERY FROM THERE I CAN GET TO "ClockMod Recovery" BUT I CANT EVEN ACCES INSTALL ZIP FROM SDCARD, WHEN I TRY THAT ALL I SEE IS A BLACK SCREEN AND A HAT AND A BIG EYE UNDER IT.
THIS IS SO FRUSTRATING,
Step one, slow down
step two, turn off the caps.
Step three it's obvious that you have s=off if you have clockwork ROM on your phone.
At the top of your phone What recovery image do you have? 3.0.0.5? or a 2.x one?
thank you for responding, I have v3.0.0.5 version
i have v3.0.0.5 version
ilkercatal said:
i have v3.0.0.5 version
Click to expand...
Click to collapse
as long as you do not have any errors on your recovery image about not being able to mount anything....to get your phone working you can do one of two things.
1)You can flash any Gingerbread based ROM either from Cyanogen(mod) or from TeamRoyal. Those all can be found in our Development section from your recovery image.
2) you can flash the PD15IMG and restore you phone back to 100% via the HBoot (engineering) screen, that can be found in our development section as well.
no luck
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
You can also check the semi brick thread in here. There is a link to a nice guide to revert back to stock. Exact same issue!
Sent from my HTC Glacier using XDA App
ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
when you select something you need to select it with the track pad. If you use the power button you'll get the text will disappear.
the only way you can use ADB to flash stuff is if you have the engineering bootloader. If you just followed TheUnlockr's method then you do not have it.
i use volume buttons and power button to select it
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
ilkercatal said:
i use volume buttons and power button to select it
Click to expand...
Click to collapse
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
ilkercatal said:
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
Click to expand...
Click to collapse
If you navigate to "advanced" and select it will it give you a new set of options?
if it does try the "mount USB" and plug it into a computer and see if you can surf the SD card via a computer.
KenpoAP said:
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
TeeJay3800 said:
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
Click to expand...
Click to collapse
thank you for help but where do you get a new rom and how do you flash it?
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
3.0.0.5 is only compatible with 2.3 ROMS.
use this to flash it
http://wiki.cyanogenmod.com/index.p...pdate_Guide#First_Method_.28via_RomManager.29
and you'll want to use the "from recovery" method.
ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
Your ok! Maybe your bu is2.2 Try any of the 2.3 roms out there and post back!
Sent from my HTC Glacier using XDA App
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Mathato said:
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
ilkercatal said:
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Click to expand...
Click to collapse
Once you are done with the PD15IMG you will have to reroot your phone. IT will return it to a 100% stock fashion.
after you re-root the phone please flash the 3.0.0.6 to help save any confusion down the road.
neidlinger said:
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
Click to expand...
Click to collapse
The original 3.0.0.6 was made by option94, and you can flash it from your existing recovery or fastboot, so booting into a ROM is not necessary.
I'm not sure what happened to my friends phone but apparently it just resetted out of no where and is stuck in fastboot i think i forget which one... The one with less option.
the keys don't work.i can't click on any options with power nor move with arrow keys.
I thought I'll just load up the pd15img and it'll be good. But nope screen is stuck at fastboot without any changes.
It is s-off but 86 bootloader idk why it's not 85 but whatever.
I think it might be bricked. I'm going to see if adb detects it later tonight. If it can are there any ways to fix it?
Sent from my HTC Amaze 4G using XDA App
Teo032 said:
I'm not sure what happened to my friends phone but apparently it just resetted out of no where and is stuck in fastboot i think i forget which one... The one with less option.
the keys don't work.i can't click on any options with power nor move with arrow keys.
I thought I'll just load up the pd15img and it'll be good. But nope screen is stuck at fastboot without any changes.
It is s-off but 86 bootloader idk why it's not 85 but whatever.
I think it might be bricked. I'm going to see if adb detects it later tonight. If it can are there any ways to fix it?
Sent from my HTC Amaze 4G using XDA App
Click to expand...
Click to collapse
what happens when you pull the battery and then reboot?
saranhai said:
what happens when you pull the battery and then reboot?
Click to expand...
Click to collapse
Same thing. It forever boots to fastboot.
Sent from my HTC Amaze 4G using XDA App
Teo032 said:
Same thing. It forever boots to fastboot.
Sent from my HTC Amaze 4G using XDA App
Click to expand...
Click to collapse
hm well, sounds like the volume buttons are broken, that's why it always reboots into the bootloader, the phone thinks that the volume down button is pressed in. what if you connected it to computer and type?
Code:
fastboot reboot
saranhai said:
hm well, sounds like the volume buttons are broken, that's why it always reboots into the bootloader, the phone thinks that the volume down button is pressed in. what if you connected it to computer and type?
Code:
fastboot reboot
Click to expand...
Click to collapse
Oh wow, noticed that my reply didn't go through.
anyways quick update. Fixed it. it wasn't the volume button. volume button would lead to hboot i think. this went straight to fastboot. I imagine it has something to do with his back button (was working, stopped working when this happened, i fixed it somehow idk)
but anyways for future reference if you get stuck at fastboot and you can't move it
Click HOME, this enables your keys
go to recovery and flash a rom.
oh i wanted to add, for some reason, his phone was like wiped clean. no os or rom. so i had to flash him a new one.
Teo032 said:
Oh wow, noticed that my reply didn't go through.
anyways quick update. Fixed it. it wasn't the volume button. volume button would lead to hboot i think. this went straight to fastboot. I imagine it has something to do with his back button (was working, stopped working when this happened, i fixed it somehow idk)
but anyways for future reference if you get stuck at fastboot and you can't move it
Click HOME, this enables your keys
go to recovery and flash a rom.
oh i wanted to add, for some reason, his phone was like wiped clean. no os or rom. so i had to flash him a new one.
Click to expand...
Click to collapse
glad you fixed it
and thanks for the tip
thanks, but the home button do not enable the buttons for me
This can be caused by a stuck VolumeDown button, and in this case the Home button won't help.
Hi,
I got the same problem with my HTC Desire Z, when I turn it on, it run on fastboot and no keys respond so I'm unable to boot the phone.
If I turn it on with Vol down button hold, the phone boot on the Hboot screen and the keys don't work on this screen too...
Unfortunately, this happen yesterday night... and since this yesterday morning, the home button of my device broke down... It sounds like I'm f**ked...
Is there a way to pass througt fastboot by using the adb ? (I'm not sure my device will be recognized byt adb on fastboot mode...)
Thanks
SKY_Megazord said:
Hi,
I got the same problem with my HTC Desire Z, when I turn it on, it run on fastboot and no keys respond so I'm unable to boot the phone.
If I turn it on with Vol down button hold, the phone boot on the Hboot screen and the keys don't work on this screen too...
Unfortunately, this happen yesterday night... and since this yesterday morning, the home button of my device broke down... It sounds like I'm f**ked...
Is there a way to pass througt fastboot by using the adb ? (I'm not sure my device will be recognized byt adb on fastboot mode...)
Thanks
Click to expand...
Click to collapse
Dang, no answers in the Desire Z section huh? It still just sounds like a stuck button. But the adb thing is worth a shot. Good luck
Sent from my HTC Glacier using xda app-developers app
bas3balman said:
Dang, no answers in the Desire Z section huh?
Click to expand...
Click to collapse
I've used the search function by looking for no keys responding on fastboot screen and that bring me here, in this case, nevermind the device, problem is the same.
It should be a stuck button, but I can access to fastboot or hboot depending on pressing the Vol Down button or not. Maybe the problem come from the not working center button of the Desire Z, I'll try it.
SKY_Megazord said:
I've used the search function by looking for no keys responding on fastboot screen and that bring me here, in this case, nevermind the device, problem is the same.
It should be a stuck button, but I can access to fastboot or hboot depending on pressing the Vol Down button or not. Maybe the problem come from the not working center button of the Desire Z, I'll try it.
Click to expand...
Click to collapse
You might have to crack the phone open and manually umstick the keys at the circuit board.
i recently rebooted my Vodaphone AU and was presented with a hboot menu. i have tried to navigate up and down this menu but the screen is frozen so cannot select any of the options. i turned my phone off by removing battery as power button was also inactive. i then powered back up and straight to hboot screen again, again all buttons inactive so cannot navigate up and down or select. removed battery and sd card then tried again, this time holding down volume button whilst powering up. still i have no joy, phone will not let me navigate or selct in boot menu and everytime i power down and up it is the same scenario. this is the message i have above boot menu.
AC PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04_M
eMMC-boot
Sep 7 2001,19:06:24
Please can you give advice how to fix this.
Try going into adb and see if you can reboot from there, not to sure.what to can do really
Sent from my Desire HD using xda premium
Unfortunately it sounds like a hardware issue. Could be simply that the volume rocker is stuck or it has to be replaced.
Adb doesn't work in boot but fast boot does.
On my mothers old phone it would do the same and only way I could get it to boot was to run
Fastboot reboot
So you can try that but I would try carefully moving to volume rocker and see if stuck
marsdta said:
Unfortunately it sounds like a hardware issue. Could be simply that the volume rocker is stuck or it has to be replaced.
Adb doesn't work in boot but fast boot does.
On my mothers old phone it would do the same and only way I could get it to boot was to run
Fastboot reboot
So you can try that but I would try carefully moving to volume rocker and see if stuck
Click to expand...
Click to collapse
Oh yeah :banghead:
Sent from my Desire HD using xda premium
Thanks, sounds reasonable.
Have ordered a new volume flex cable/board.
Hi All,
I am seeking help from you guys to fix my mobile. Pleaseeeeeeeeeeeeeeeee................
I'm new to this forum. I have read some posts on rooting/unrooting/flashing etc. But i'm at no point what to do with my mobile.
Here is my problem.
1. My display/touch screen glass was broken a month ago. But the handset was working perfectly even touch sensitivity was good. only problem was the glass damaged so badly
2. I ordered for the display/touch screen glass. Then i went into the Youtube to see how to fix the glass. I did everything as they said in that and glass was fixed
3. I was so happy that i fixed and then i switched on my phone. It took me to the Boot screen. Below are the contents showing on my screen.
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
FAST BOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN"
NOTE: << Here i'm unable to navigate to any other option using the volume buttons >>
I read the posts in xda and tried volume up + power. It vibrates three times and black screen shows up
I tried volume down + power button it opens up a boot screen with below messages
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
even here i'm unable to navigate to other options using volume buttons.
i'm just stuck at this point.
so i went to xda forums and saw few techies telling to download PD15IMG.zip. so i did and placed in SD card (which is new SD card - 4GB. Just placed inside the sd card - no folders)
then i did switched on. It did wait for sometime in boot screen and searched for PD15DIAG.ZIP and went ot PD15IMG.zip which was found and started updating etc.
Then it asked to press power button, i did and then i landed again in boot screen where i'm unable navigate since nothing happens on volume button press.
I dunno what to do or whether i did is correct. :crying:
so please help me getting me fixed.
i want to see the android home scree soon with your help.
Thanks,
Shrrm.
shrrm79 said:
Hi All,
I am seeking help from you guys to fix my mobile. Pleaseeeeeeeeeeeeeeeee................
I'm new to this forum. I have read some posts on rooting/unrooting/flashing etc. But i'm at no point what to do with my mobile.
Here is my problem.
1. My display/touch screen glass was broken a month ago. But the handset was working perfectly even touch sensitivity was good. only problem was the glass damaged so badly
2. I ordered for the display/touch screen glass. Then i went into the Youtube to see how to fix the glass. I did everything as they said in that and glass was fixed
3. I was so happy that i fixed and then i switched on my phone. It took me to the Boot screen. Below are the contents showing on my screen.
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
FAST BOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN"
NOTE: << Here i'm unable to navigate to any other option using the volume buttons >>
I read the posts in xda and tried volume up + power. It vibrates three times and black screen shows up
I tried volume down + power button it opens up a boot screen with below messages
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
even here i'm unable to navigate to other options using volume buttons.
i'm just stuck at this point.
so i went to xda forums and saw few techies telling to download PD15IMG.zip. so i did and placed in SD card (which is new SD card - 4GB. Just placed inside the sd card - no folders)
then i did switched on. It did wait for sometime in boot screen and searched for PD15DIAG.ZIP and went ot PD15IMG.zip which was found and started updating etc.
Then it asked to press power button, i did and then i landed again in boot screen where i'm unable navigate since nothing happens on volume button press.
I dunno what to do or whether i did is correct. :crying:
so please help me getting me fixed.
i want to see the android home scree soon with your help.
Thanks,
Shrrm.
Click to expand...
Click to collapse
To use the PD15 you need a goldcard. You have a Panache not a MT4G, so thats why you need a goldcard
Volume does nothing, its gonna turn on your phone.
What recovery do you have installed?
Are you HTC Dev Unlocked?
You dont look like you have the Enginerring Hboot installed?
Lastly, you posted in the wrong section
N_otori0us_ said:
To use the PD15 you need a goldcard. You have a Panache not a MT4G, so thats why you need a goldcard
Volume does nothing, its gonna turn on your phone.
What recovery do you have installed?
Are you HTC Dev Unlocked?
You dont look like you have the Enginerring Hboot installed?
Lastly, you posted in the wrong section
Click to expand...
Click to collapse
Thanks for the reply... It would be great if could let me know the path to post this question.
Also, I gone thru a forum in XDA and they asked to download the SimpleGoldCard tool. But i just formatted the memory card. after that i'm unable to getCID. This was because the phone was not able to be detected in my system. so the ADB was telling that "no devices found"..
pleaseeeeeeeeeeeeeeeee helppppppppppppppp meeeeeeeeeeeeeeeeeee.............
Some situation your in bro lol.
I know the panache was a mess too root
Do you have the drivers for your phone installed?
What instructions are you following?
What step are you stick at.
Are you rooted
Edit: nvm u have s off
So what recovery do you have
Sent from my MyTouch 4G using xda app-developers app
Bro.. I don't know anything about the stuffs you asked.
I looked at the link http://forum.xda-developers.com/showpost.php?p=16858971&postcount=98
In 1st step it asks to enable USB debugging. But i'm unable to go inside my home screen at all.
So i skipped it and went to next - which is the GoldCard step. In that it asks to getCID, but my memory card is not getting detected when i placed it inside my phone.
So i dunno where to start and where to end.
I have installed the ADB and GoldCard tool. That's it. Couldn't go further after that..
I don't have a backup of panache drivers, did not backup anything from my phone.
Just replaced the touch screen glass and booted the phone.
I missed to tell one thing... few months back i unlocked my phone by giving it to a local technician. I dunno what unlock he did, but after that the "Mobilicity" doesn't show up when i boot up when the phone was working. So i was able to use other SIM card in my panache.
So please guide me where to start and how to get my phone work.
Thanks,
Shrrm.
shrrm79 said:
Bro.. I don't know anything about the stuffs you asked.
I looked at the link http://forum.xda-developers.com/showpost.php?p=16858971&postcount=98
In 1st step it asks to enable USB debugging. But i'm unable to go inside my home screen at all.
So i skipped it and went to next - which is the GoldCard step. In that it asks to getCID, but my memory card is not getting detected when i placed it inside my phone.
So i dunno where to start and where to end.
I have installed the ADB and GoldCard tool. That's it. Couldn't go further after that..
I don't have a backup of panache drivers, did not backup anything from my phone.
Just replaced the touch screen glass and booted the phone.
I missed to tell one thing... few months back i unlocked my phone by giving it to a local technician. I dunno what unlock he did, but after that the "Mobilicity" doesn't show up when i boot up when the phone was working. So i was able to use other SIM card in my panache.
So please guide me where to start and how to get my phone work.
Thanks,
Shrrm.
Click to expand...
Click to collapse
For adb to see your phone you need to check USB debugging.
Try going into boot loader
Then press recovery.
Tell me what happens
Sent from my MyTouch 4G using xda app-developers app
I'm unable to move to other options using the volume up or down.
I can only see the screen...
Aww man that sucks. I guess your hardware is messed too.
And adb can't see your phone either.
Try this in adb but it probably won't work
Adb reboot recovery
Hope it works
Sent from my T-Mobile myTouch 4g using xda app-developers app
seeing some progress...
I connected my phone to my laptop.
Opened command prompt and went into the adb folder.
Typed in "adb reboot recovery" But it did not do anything.. it just said "no devices found".
Then i tried "fastboot reboot"... it restarted my phone and T-Mobile logo came up and it took me to the home screen, played some tutorial videos etc. But it kept saying "Safe Mode" at the bottom of the screen.
The buttons like "Home" "Back" etc did not work except the search button which took me to some voice search.
I guess something is happening... Hope you must be knowing on what it does
Please help me... I just want to see my phone back... not the T Mobile stuff...
shrrm79 said:
seeing some progress...
I connected my phone to my laptop.
Opened command prompt and went into the adb folder.
Typed in "adb reboot recovery" But it did not do anything.. it just said "no devices found".
Then i tried "fastboot reboot"... it restarted my phone and T-Mobile logo came up and it took me to the home screen, played some tutorial videos etc. But it kept saying "Safe Mode" at the bottom of the screen.
The buttons like "Home" "Back" etc did not work except the search button which took me to some voice search.
I guess something is happening... Hope you must be knowing on what it does
Please help me... I just want to see my phone back... not the T Mobile stuff...
Click to expand...
Click to collapse
Can you enable USB debbuging?
Sent from my Dark JellyBellyG1 using xda app-developers app
Yes... I now switched on and went into the UI...
Enabled the USB Debugging.
Still it shows "Safe Mode" at the bottom.
HI, any update... please help... am following your replies only...
Awaiting for your response...
Yes... I now switched on and went into the UI...
Enabled the USB Debugging.
Still it shows "Safe Mode" at the bottom.
So can you go into bootloader and then do
Adb reboot recovery
Sent from my Dark JellyBellyG1 using xda app-developers app
shrrm79 said:
Hi All,
I am seeking help from you guys to fix my mobile. Pleaseeeeeeeeeeeeeeeee................
I'm new to this forum. I have read some posts on rooting/unrooting/flashing etc. But i'm at no point what to do with my mobile.
Here is my problem.
1. My display/touch screen glass was broken a month ago. But the handset was working perfectly even touch sensitivity was good. only problem was the glass damaged so badly
2. I ordered for the display/touch screen glass. Then i went into the Youtube to see how to fix the glass. I did everything as they said in that and glass was fixed
3. I was so happy that i fixed and then i switched on my phone. It took me to the Boot screen. Below are the contents showing on my screen.
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
FAST BOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN"
NOTE: << Here i'm unable to navigate to any other option using the volume buttons >>
I read the posts in xda and tried volume up + power. It vibrates three times and black screen shows up
I tried volume down + power button it opens up a boot screen with below messages
"GLACIER PVT SHIP S-OFF
HBOOT-0.89.0006
MICROP-0429
RADIO 26.13.04.19_M
eMMC-boot
Jul 15 2011, 16:45:17
HBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
even here i'm unable to navigate to other options using volume buttons.
i'm just stuck at this point.
so i went to xda forums and saw few techies telling to download PD15IMG.zip. so i did and placed in SD card (which is new SD card - 4GB. Just placed inside the sd card - no folders)
then i did switched on. It did wait for sometime in boot screen and searched for PD15DIAG.ZIP and went ot PD15IMG.zip which was found and started updating etc.
Then it asked to press power button, i did and then i landed again in boot screen where i'm unable navigate since nothing happens on volume button press.
I dunno what to do or whether i did is correct. :crying:
so please help me getting me fixed.
i want to see the android home scree soon with your help.
Thanks,
Shrrm.
Click to expand...
Click to collapse
Guess your problem might be the volume keys. Seems after replacing your screen, the volume down got stuck some how. Thats why whgen u boot up, it takes you right to bootloader mode. So try dismantling it and check the volume buttons that they are fixed correctly and that the are not pressed by the housing.
mickeyasamoah said:
Guess your problem might be the volume keys. Seems after replacing your screen, the volume down got stuck some how. Thats why whgen u boot up, it takes you right to bootloader mode. So try dismantling it and check the volume buttons that they are fixed correctly and that the are not pressed by the housing.
Click to expand...
Click to collapse
Hi ,
If you see my post, i was go inside the OS and able to see the home screen and see menus etc. I did use "fastboot reboot" command in the command prompt. I also tested the Volume Keys and i was able to adjust the volume. I played some default music and then adjusted the volume it was working properly.
Now i'm using the command prompt to boot into the OS using the "fastboot reboot" every time. I need to go inside the OS normally.
As a next step, i want to recover my HTC Panache to my old state or the new OS (i guess i can have a new android version in my HTC Panache since other users state that they had android 4.x )
Thanks,
Shrrm.
I enabled the USB Debugging, and tried "adb reboot recovery" from command prompt. It did restart the mobile and showed T-Mobile MyTouch logo and then it displayed a "Cell Phone symbol with a Red Triangle with Exclamation in it"
shrrm79 said:
I enabled the USB Debugging, and tried "adb reboot recovery" from command prompt. It did restart the mobile and showed T-Mobile MyTouch logo and then it displayed a "Cell Phone symbol with a Red Triangle with Exclamation in it"
Click to expand...
Click to collapse
Lol I know that means something but I don't know what, Google it
Sent from my Dark JellyBellyG1 using xda app-developers app
N_otori0us_ said:
Lol I know that means something but I don't know what, Google it
Sent from my Dark JellyBellyG1 using xda app-developers app
Click to expand...
Click to collapse
You could also check here
http://forum.xda-developers.com/showthread.php?t=917134
Someone had the same issue and that red triangle is your stock recovery.
Sent from my Dark Unicorn Resurrected v.2.5 using xda app-developers app
Ok.. after lot of struggle i somehow got the up something...
I did use the below link to Root and update the ROM.
http://wiki.cyanogenmod.org/w/Install_CM_for_glacier
I downloaded a custom ROM from here
http://forum.xda-developers.com/showthread.php?t=1383629
After that i did all steps they asked to do so.
It did update the ROM and booted the OS.
When it went inside then screens till shows "Safe Mode" at the bottom.
If i switch off the phone or restart it goes inside the "BootLoader".
I want to boot inside normally. So please help me out here...
shrrm79 said:
Ok.. after lot of struggle i somehow got the up something...
I did use the below link to Root and update the ROM.
http://wiki.cyanogenmod.org/w/Install_CM_for_glacier
I downloaded a custom ROM from here
http://forum.xda-developers.com/showthread.php?t=1383629
After that i did all steps they asked to do so.
It did update the ROM and booted the OS.
When it went inside then screens till shows "Safe Mode" at the bottom.
If i switch off the phone or restart it goes inside the "BootLoader".
I want to boot inside normally. So please help me out here...
Click to expand...
Click to collapse
That triangle thing is ur stock recovery, so if u haven't rooted ur device,try rooting it and flash a recovery and if u are rooted refresh a recovery then flash a custom Rom.
Sent from my HTC myTouch 4g using xda app-developers app