hi guys, having major issues here.
i'm on JORDN_U3_97.21.51.sbf, a t-mobile 2.1 rom. i have rooted with an old version of superoneclick because 2.1.1 wouldnt work, i've installed sndinitdefy 1.4.2 which all goes fine.
the problem comes when flashing any froyo 2.2 sbf, none of them work. In RSD at the reboot stage it just says PASS rather than rebooting, and it sticks at the motorola screen. ive tried with 4.9 and 5.x RSD.
i literally dont know what to try next. how can i get onto a froyo rom?
ive tried flashing straight from 2.1 to a CM7 and PAYS rom which didnt work either.
everytime the sbf fails im forced to flash back to JORDN_U3_97.21.51.sbf, which always works fine.
please help
Try 2.3 gb using nandroid + fixed sbf may work n did u wipe b4 n after flashing??
Sent from my MB525 using XDA Premium App
if your on tmobile 2.1, try updating thru settings and download the update ota, or root phone then update via zip, which I think is somewhere in the dev forum. Root first then install 2init.
E. Try redownloading your sbf
Got a Headache? It's all in your Head.
how come some sbfs are 160mb and others 16-17mb?
have you got the link for the tmobile zip??
thx
i did try wiping between roms
if i were u i wouldn't update to 2.2.2
2.1 is much more better and less bugs.
http://forum.xda-developers.com/showthread.php?t=1140839
could be good.
hope it helps.
nogoodusername said:
Try 2.3 gb using nandroid + fixed sbf
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
link please? what does fixed sbf mean? is that the difference between the 160mb and 16-17 sbf files?
i cant update OTA as I dont have a sim card. Wifi only unfortunately!
guys this is the thread that got me in this mess http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
how do i undo this
Stuck with ROM JORDN_U3_97.21.51.sbf
Hello
I know there is a long time for that post.
But I am stuck, exactly in the same situation, I flash JORDN_U3_97.21.51.sbf
and now I can't do nothing.
PLEASE HELP !!
Thanks in advance
me too, is your phone working ok on this build?
Hi guys,
how did you get on with getting out of this build and was it working ok on your phones?
if you look at my other post I have no phone signal or capability at all plus plenty of other problems.
Cheers
Tim
I know there is a long time for that post.
But I am stuck, exactly in the same situation, I flash JORDN_U3_97.21.51.sbf
and now I can't do nothing.
PLEASE HELP !!
Thanks in advance[/QUOTE]
timb138 said:
Hi guys,
how did you get on with getting out of this build and was it working ok on your phones?
if you look at my other post I have no phone signal or capability at all plus plenty of other problems.
Cheers
Tim
I know there is a long time for that post.
But I am stuck, exactly in the same situation, I flash JORDN_U3_97.21.51.sbf
and now I can't do nothing.
PLEASE HELP !!
Thanks in advance
Click to expand...
Click to collapse
[/QUOTE]
try this
http://forum.xda-developers.com/showthread.php?t=1486731
Is your battery charged ?
MB525 red lense
timb138 said:
Hi guys,
how did you get on with getting out of this build and was it working ok on your phones?
...
Thanks in advance
Click to expand...
Click to collapse
[/QUOTE]
Flash the JDGC_U6_2.1.3.0 SBF
Then root with SuperOneClick and proceed as per the guides.
Thank you, Jalal-jap, Thank you God!!!
Oh my god!
Thank you soooooooo much Jalal-jap.
Many thanks also to dlhxr for bringing this to xda and to d4d9 on mfunz for finding this gem.
My phone is fully restored to 2.2.2 froyo!
I haven't checked camera because of possible flash burn out mentioned in dlhxr's post but battery and all other functions are now fully working and I have a phone signal again!!!!
This definately looks like an original motorola build and is very responsive & smooth. All be it most of the menu's are in Chinese.
At last a solution to all those bricked defys at the bottom of drawers, lets see what the developers can do with it to make further improvements on the defy.
---------- Post added at 10:21 AM ---------- Previous post was at 09:35 AM ----------
OK now for the good stuff.
I followed the guide here http://forum.xda-developers.com/showthread.php?t=1807899 and it works but see below for observations.
I haven't repeated the instructions below so read the other post this is not a guide.
ran superoneclick and it took much longer than before - it reboots twice so don't disconnect until its finished.
ran 2ndint old version - 1.4.2 and installed 2nd init no problems - had earlier problems with latest 2ndinit in that it installed but i never got the blue led to boot into recovery, possibly due to the state my kernel and boot system were in but the older one definitely works.
rebooted into boot menu vol down @ blue led
cleared user data, cache, devit cache
installed cm10 zip from sd card
rebooted and then realised i hadn't recleared cache, opened recovery again on boot (@ blue led)
cleared cache and rebooted again.
chinese boot screen logo came up for about 30 secs (dont panic) then the spinning CyanogenMod wheel for a while then it started jelly bean!!
All seems fine except I dont have a battery icon at present and the red led is illuminated (thinking about it I accidentally wiped the battery data when clearing the davik so this may be my bad!)
Never used jellybean before so gonna have a play, try overclocking / undervolting again for a while then post back.
I`m one big happy bunny right now and thanks again to all of you that helped directly or indirectly to get me to this point
timb138 said:
Oh my god!
Thank you soooooooo much Jalal-jap.
Many thanks also to dlhxr for bringing this to xda and to d4d9 on mfunz for finding this gem.
My phone is fully restored to 2.2.2 froyo!
I haven't checked camera because of possible flash burn out mentioned in dlhxr's post but battery and all other functions are now fully working and I have a phone signal again!!!!
This definately looks like an original motorola build and is very responsive & smooth. All be it most of the menu's are in Chinese.
At last a solution to all those bricked defys at the bottom of drawers, lets see what the developers can do with it to make further improvements on the defy.
---------- Post added at 10:21 AM ---------- Previous post was at 09:35 AM ----------
OK now for the good stuff.
I followed the guide here http://forum.xda-developers.com/showthread.php?t=1807899 and it works but see below for observations.
I haven't repeated the instructions below so read the other post this is not a guide.
ran superoneclick and it took much longer than before - it reboots twice so don't disconnect until its finished.
ran 2ndint old version - 1.4.2 and installed 2nd init no problems - had earlier problems with latest 2ndinit in that it installed but i never got the blue led to boot into recovery, possibly due to the state my kernel and boot system were in but the older one definitely works.
rebooted into boot menu vol down @ blue led
cleared user data, cache, devit cache
installed cm10 zip from sd card
rebooted and then realised i hadn't recleared cache, opened recovery again on boot (@ blue led)
cleared cache and rebooted again.
chinese boot screen logo came up for about 30 secs (dont panic) then the spinning CyanogenMod wheel for a while then it started jelly bean!!
All seems fine except I dont have a battery icon at present and the red led is illuminated (thinking about it I accidentally wiped the battery data when clearing the davik so this may be my bad!)
Never used jellybean before so gonna have a play, try overclocking / undervolting again for a while then post back.
I`m one big happy bunny right now and thanks again to all of you that helped directly or indirectly to get me to this point
Click to expand...
Click to collapse
good luck
to tidy up and give pointers to anyone else that ends up on this thread from a search.
The battery ? icon and red led issue has now been fixed using the red lense fix for cm10. A bit strange as I have a green lense defy but presume its the red lense / defy+ kernel in the chinese BL6 rom that has caused the issue.
I originally installed the 2013 cm10 2nd boot daily over the bl6 froyo, but then reflashed using 2013 daily cm10 1st boot version to see if it was 2nd boot version problem but no difference.
As that problem is fixed I have overclocked to 1200Mhz and the phone is working much better than it ever has.
battery is lasting a full day which it often didn't using stock at 800MHz so the latest build is obviously much more efficient.
One thing I noticed after flashing back to the 1st build rom is that my wifi signal is much weaker than it was on the 2nd boot version but as I have now set everything up and got the phone set up as I want it I wont change back for a while, it works and that's the main thing.
my settings are:
25vsel1 @ 300mhz
42vsel2 @ 650mhz
60vsel3 @ 1200mhz
threshold set at 90%
very stable, no hangs or reboots, cpu mflops 1 core = 30.1
Quadrant full benchmark results = 1560
good enough for me!!
No other issues found as yet.
Thanks to all who helped once again - hopefully I can pass it on in the future.
Related
I have tried this http://forum.xda-developers.com/showthread.php?t=1033654 and I end up with a frozen Google with CM logo on the O. I cannot install any other ROM no matter what except for JORDN_U3_97.21.51.sbf
Can someone please help me get CM 7? I have tried all diff sbf and it never boots up and I get a black screen or white light. Battery level is 80%.
Wish android jailbreaking would be simpler like IOS ( I am coming from an iPhone )
Thanks
From a n00b
That sbf you Flashed cannot be donwgraded cause is level 5, you re stuck on 2.3.4 gingerbread defy+ or 2.1 eclair, you can flash a froyo fixed sbf,
forum.xda-developers.com/showpost.php?p=15341774&postcount=8
After that go to CWM when the blue led on press vol - , stable recovery, wipe data, Flash via recovery cm7, wipe cache and enjoy! Be carefull when you Flash a sbf vía rsdlite!
Good luck!
Motorola Defy CM7 RC 1.5 OC 1GHz
LeonardoJegigzem said:
That sbf you Flashed cannot be donwgraded cause is level 5, you re stuck on 2.3.4 gingerbread defy+ or 2.1 eclair, you can flash a froyo fixed sbf,
forum.xda-developers.com/showpost.php?p=15341774&postcount=8
After that go to CWM when the blue led on press vol - , stable recovery, wipe data, Flash via recovery cm7, wipe cache and enjoy! Be carefull when you Flash a sbf vía rsdlite!
Good luck!
Motorola Defy CM7 RC 1.5 OC 1GHz
Click to expand...
Click to collapse
I will give your suggestion a try. Didn't mean to post it in the wrong place its just cumbersome to figure out this fragmentation at times.
Wow those directions worked perfectly and I am able to restore to fixed froyo.
Thank you again for the help and I will post in the right section for the next steps.
googcs said:
Wow those directions worked perfectly and I am able to restore to fixed froyo.
Thank you again for the help and I will post in the right section for the next steps.
Click to expand...
Click to collapse
Glad you got it worked out.
@everyone else, his issue is taken care of. No need to keep posting.
Sent from my MB525 using Tapatalk
Hi Guys and Girls, I hope this is the right place for my question. Sorry if I sound like a 12-year old - my english is not really the best...
I own the Motorola Defy+, and I tried to get rid of motoblur. I installed SndInit 2.0, did a reboot, did a backup, did factory reset, wiped dalvik cache and picked the miui-rom I had previously placed on my SD. The installation went pretty good, my phone told me that it finished the installation and I did another reboot.
After the reboot I get the red M (default Motorola-logo just like before I was meddling around with the phone) but just for a very short period of time and then I get a black screen with white letters (slightly out of proportion) saying:
Bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to Program
Transfer Mode:
USB
When I remove the USB-cable the last two lines are replaced by:
Connect USB
Data Cable
Do you guys have any idea, how I could get MIUI, CM or anything else running on my phone again? I'd even be quite happy to have the stockrom running again, since a phone with ****ty motoblur is still better than no phone at all.
I'd be really grateful for any kind of help, thanks in advance.
The miui you installed was for defy or defy+? And , can you access to recovery?
Motorola Defy CM7 RC 1.5 OC 1GHz
You have forgot to do 2 things. this might be the problem .
Do:
1. Factory reset.
2. wipe data cache.
3. wipe dalvik cache.
4.install MIUI rom.
5. wipe once again data cache.
6. reboot.
If you can access recovery again . my guess you can..
Thank you guys for taking care of me!!
@LeonardoJegigzem
The MIUI is called miui-ger_DEFY_1.12.23_FULL_EN_DE.zip - it's for Defy but I've read in forums that it should run on Defy+ aswell.
@VoLtrex31
I can't access recovery (I'm assuming you're talking about the "push volume-down when blue LED turns on"-recovery?), the screen I described in OP appears right after the red-M shows up for the first time.
You are right, I didn't wipe data cache neither before, nor after the installation.
Thats not good.
Search in the forums for how to access the recovery via your computer..
This might be your only way.
Ask more forums for technical help since xda is not the best forum for asking for help.
because i am not an expert .
But don't worry i bet many people got that problem too so there is a solution .
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
buruss said:
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
Click to expand...
Click to collapse
Now that's great news - the folks at motorola seem to know that ppl want to avoid ****ty motoblur and **** up their phones so they built an easy way to rescue broken phones.
I will try that asap - right now I'm using an old sony ericsson Xperia X8 - want my Defy+ back!
Thanks buruss!
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
mikrom.cz said:
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yea, I 've been through the same today/yesterday, and after a lot of cursing I can tell you it is exactly like this T.T you have to re-flash the stock ROM 2.3.6 again, and then if you find a way to downgrade/install Miui-CM/basically anything than staying with the stock ROM, let me know! xD
Just relax, I'm telling you this because yesterday I could have killed a dragon with my bare hands, but a soft brick is NP, as long as RSDlite recognizes your phone you can always going back to safety, from what I've learnt hard bricking a Defy is veryveryvery hard, thanks/due to a locked boot loader
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
mikrokosmonaut said:
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
Click to expand...
Click to collapse
I guess it's inevitable, when you start trying this and that custom ROM, sooner or later you're going to screw it up xD but it's actually good when that happens, because you know 100% you can fix everything - you did it once, you'll do it again
Happy new year!
miui uses the 2.2 froyo as base, since all the defy plus have gingerbread miui wont boot, miui hve boot.img and davtree.img in the rom.zip, if you flashan old boot.img in to a newer defy plus with new bootloader(2.3.6) you get an error, ho to fix it, try deleting the boot.img and devtree.img from the zip and replace the 2.3.6 boot.img and devtree.img form 2.3.6 and add it to the zip( miui rom) and try to flash it again and see if it works
You guys are awesome! Phone is booting again
installed RSDlite 5.3.1
downloaded the latest .sbf for my phone and my provider
let RSDlite do its magic and now everything's working just fine.
Next thing to do - try again to get rid of motoblur!
It's not 100% true, I installed MIUI over my 2.3.4 Gingebread and it worked like a charm
Only problem is, I can't install it anymore now that I'm on 2.3.6, but 2.2 is not strictly needed, 2.3.4 worked as well
Hey, guys! I have the exact same problem. I tried to install a Galnet MIUI ROM over at galnetmiui.co.uk, and i messed it up. I didn't really know what i was doing. Perhaps i forgot to wipe cache after installation. Have the exact same error message as mikrokosmonaut.
I was running my mb 256 with android 2.3.6, as far as I know, i have to use RSD Lite to istall stock rom again. Where do I find the correct SBF? My phone was bought without a service provider subscribtion, so I have no clue where to find the right SBF. I have no objection against having blur on the phone.
Can anyone help?
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
daede86 said:
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
Click to expand...
Click to collapse
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
mikrom.cz said:
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
Click to expand...
Click to collapse
thanks for your reply! indeed i'm using cm 7.2.. it works pretty well, except some delays! never heard about miui nightly! i did a research on google but i couldn't find anything.. any idea??
thanks again!
hi again!
i was thinking.. you said miui shouldn't work on 2.3.6 and i guess you are right! so if i do the same thing i did (change the boot and devtree file in the latest miui.zip that is 2.3.7 if i'm not wrong) but using files from android 2.3.7?
maybe i try to explain myself better..
i make a nandroid backup of my cm 7.s2 which is 2.3.7.
then i change the files boot and devtree from cm 7.2 to the latest miui.
should it work? what do you think?
thanks again
Hi, folks! *GREAT NEWS!*
Some guys over at the devs section on the thread below have found a froyo sbf with bootloader 6 (the same as the defy 2.3.6 sbf)!!! This means we can use it to downgrade to froyo and install MIUI over it!
http://forum.xda-developers.com/showthread.php?t=1486731
I haven't tried it yet, but will flash later today or tomorrow. You should read through some of the posts and decide for yourselves if you want to try or not.
All the best!
-If I managed to help you in any way, please press the thanks button!
Hello dear xda community.
I own a Defy+ with 2.3.6 stock Kernel and want to switch to CM7. (Do I need another Kernel?)
Which build do you prefer, I can't decide between:
7.1.0-11
Quarks nightly
Epsylon3s nightly
maniacs nightly
Basically I'm just looking for a stable AOSP/blurfree ROM, so which one is the stablest up to now?
Which of the mentioned ROMS need/work with the battery/camera patches and are there different versions of these patches around? (here and here)
Am I right that there should be no more problems than battery and camera functionality up to now?
Thank you in advance
Edit: Another question I forgot:
In the title of the 7.1.0-11 it is written "Android 2.3.7". So does this mean even though the zip doesn't contain a Kernel it does contain 2.3.7? I couldn't find a 2.3.7 kernel for the Defy+ elsewhere.
Edit 2: I found an answer concerning whether to use 7.1.0-11:
The latest nightlys are stable, don't use 7.1.0-11
Click to expand...
Click to collapse
Though thats a tough statement whenever it comes to nightlys, I assume I will trust him here.
Like I wrote to you (by PM) before, I don't own a Defy+, but I'd say go on and try the latest Defy+ nightly which is from Quarx at this time: cm72-20120308-NIGHTLY-Defy+.zip md5 checksum: 8df5562b60ded2978a38eb9ac21bdc8e .
Make a nandroid backup of your system (custom recovery / advance / backup&restore / backup all) before installing it and then see how it goes from there...
If it really doesn't boot up, you have problems with battery not fully charging, camera or other things, you can find solutions or ask again - but at least you'll have a nand to fall back on... so no risk involved.
I haven't tried that specific March 8th Defy+ nightly yet, but I bet that it is probably at 1 or 2 small fixes close to perfection and you won't regret installing it I assure you.
Just be patient at first boot and wait a good 5-6 minutes before thinking being in a bootloop and do anything crazy..
God luck.
I tried cm72-20120308-NIGHTLY-Defy+.
Wifi is not working ..
and battery yet to check..
also camera prob..
Hi AL
i reinstalled it and now wifi is working..
But the problem now is battery..
It drains off quickly.
Also i used get atleast 50% signal at my home..
but now with this, its not catching the signal at all..
Its fine at places where full signal is there..
Let me recommend CM7 WhiteRabbit Edition 1.3! Pure awesomeness + Aroma touch based installer. This means you can customize your installation (e.g. defy+ battery fix, what apps you want installed, witch wifi driver, etc)!!
Install the PLUS edition for gingerbread kernel!
hafizca said:
Hi AL
i reinstalled it and now wifi is working..
But the problem now is battery..
It drains off quickly.
Also i used get atleast 50% signal at my home..
but now with this, its not catching the signal at all..
Its fine at places where full signal is there..
Click to expand...
Click to collapse
I was using the CM7 for Defy+ 140312 build and everything worked fine for me! Also played all sorts of games like Dead Space, Shadow Gun with ease!
you should try WUIU:http://forum.xda-developers.com/showthread.php?t=1161110
works great!!!!
The whiterabbit version problem
Hey
i did download the whiterabbitplus version as i has android 2.3.6 with kernel also 2.3.6
i rooted it as mentioned using the latest superclick
i theninstalled sndinit 2.0 and attempted to enter recovery but i got the triangle with the xclamation mark so i installed clockworkmod and it got me into recovery alright
here i format cache ,data wipe,factory reset etc and say install "zip from sd card "
auroma installer starts off fine works upto letting me select the options and everything ...just when it says "click next to start " when i do ..it just says
system/mount
error(system/mount) fail or something ...
and pretends its complete and asks for reboot
after reboot i discover no changes and it just acts like a facotry reset too place and i need to configure everything again
ive tried everything on the net ..please do help ..should i flash a lower version like froyo and try again ??
Maniacs builds are great, you should check them out.
Johnny_Queste said:
you should try WUIU:http://forum.xda-developers.com/showthread.php?t=1161110
works great!!!!
Click to expand...
Click to collapse
Sag1e said:
Maniacs builds are great, you should check them out.
Click to expand...
Click to collapse
Please, guys, stop the confusion. Both of those are Froyo only.
@athenus Have you managed to flash any ROM? From those you have mentioned...
CM7.1 - Froyo only
maniac's builds - Froyo only
Epsylon's builds - there are both Froyo and Gingerbread available
Quarx's builds - both Froyo and Gingerbread available <- this should be your choice. The latest Quarx's builds is awesome and you can find it here - http://quarx2k.ru/cm7-nightly-defy+/
P.S. Quarx is currently the only developer that actually owns a DEFY+.
If you are confused still, feel free to PM me, as I can't keep with all the threads I've posted in
hafizca said:
Hi AL
i reinstalled it and now wifi is working..
But the problem now is battery..
It drains off quickly.
Also i used get atleast 50% signal at my home..
but now with this, its not catching the signal at all..
Its fine at places where full signal is there..
Click to expand...
Click to collapse
I might be wrong, but the problems you have described having make me believe that you did not use and set the Defy Baseband Switcher app properly. Am I right/wrong?
Phone carriers around the world do not all use the same radio frequencies to receive/transmit phone signal and after any first install of cm7, you have to use that included app, give it root access, select the baseband that correspond to your location/carrier and reboot. Failing to do so causes bad signal eception, high battery drain and hot phones...
I hope that it was your problem because it will make it very simple to solve for you then.
EDIT: I believe that the baseband can now simply be changed under: Device settings/Baseband selection - no more dedicated app...
Installation failure of CM7 latest Joudan-plus
I hope someone can help me please . . .
Having rooted the phone successfully, and having followed all the relevant instructions (including installing first the various utilities - Titanium, 2ndInit, etc), to upgrade my Defy+ Build 4.5.1-134_DFP-231 with the latest CM7, I copied the CM7 zip to my Defy+ then installed it using 2ndInit - success.
Then, on the reboot, the phone just hangs at the M logo.
After doing the normal recovery, and trying to install again, these messages appear:
Verifying update package
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
Can anyone suggest what I should do next to recover the situation?
Installing CM7 on Defy+
Following my previous posting, I installed the nightly Jordan plus, from the night before - the only other one available.
That installed without any error message,
However, upon normal reboot, the phone hung at the M logo.
Any ideas please?
INSPEC said:
Following my previous posting, I installed the nightly Jordan plus, from the night before - the only other one available.
That installed without any error message,
However, upon normal reboot, the phone hung at the M logo.
Any ideas please?
Click to expand...
Click to collapse
Wipe data/cache?
Sent from my ATRIX HD using XDA Free mobile app
Installing CM7 on Defy+
Thanks for the response.
Yes, I did first wipe data and cache.
And have tried repeating the installation (including wiping).
Still hung at M logo.
INSPEC said:
Thanks for the response.
Yes, I did first wipe data and cache.
And have tried repeating the installation (including wiping).
Still hung at M logo.
Click to expand...
Click to collapse
Which recovery are you using? The normal one or the one designed for bigpart?
Sent from my ATRIX HD using XDA Free mobile app
Installing CM7 on Defy+
Thanks again for response.
I am using, from the xda posting,
2ndInit Recovery Installer v2.3 [Updated: 24-April-2012]http://forum.xda-developers.com/showthread.php?p=23465603
Installin CM on Defy+
This is an update on a previous posting of mine . . .
It read:
I hope someone can help me please . . .
Having rooted the phone successfully, and having followed all the relevant instructions (including installing first the various utilities - Titanium, 2ndInit, etc), to upgrade my Defy+ Build 4.5.1-134_DFP-231 with the latest CM7, I copied the CM7 zip to my Defy+ then installed it using 2ndInit - success.
Then, on the reboot, the phone just hangs at the M logo.
After doing the normal recovery, and trying to install again, these messages appear:
Verifying update package
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted
I have subsequently performed:
Wipe data/Factory reset, then
Wipe cache.
and then trying to install three different version of CM - they are, CM 7 (both of the available Jordan Plus Nightlies), and then a CM 12 from another posting here in XDA.
All three resulted in the 'signature' problem. But the filename of all three files said they were "signed".
So can someone please explain . . . ?
---------- Post added at 02:25 AM ---------- Previous post was at 01:35 AM ----------
I have now discovered the enable/disable signature check . . .
Having disabled the signature check, and repeated all of the steps in my previous posting, and wiping the Dalvik cache, the phone still hangs at the M logo on reboot.
Any suggestions please?
Installing CM on Defy+
Following on . . .
Could this be a Bootloader problem?
I see references to similar symptoms being fixed by unlocking/relocking the Bootloader.
But my understanding, from the Cyanogen Mod website, is that CM looks after this automatically . . .
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Shrewdy said:
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Click to expand...
Click to collapse
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Please help
pk92 said:
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Click to expand...
Click to collapse
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Shrewdy said:
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Click to expand...
Click to collapse
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Thanks buddy
pk92 said:
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Click to expand...
Click to collapse
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Nothing works
Shrewdy said:
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Click to expand...
Click to collapse
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Shrewdy said:
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Click to expand...
Click to collapse
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Still stuck
pk92 said:
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Click to expand...
Click to collapse
Thanks for helping me out....
The motorola logo stays around for 20 seconds after with the Motorola boot animation starts.....
So i left my defy on for around 20 mins and nothing is happening its still playing the boot animation. !!
I havent yet downloaded the sbf link you have given me as i am at work now and will be able to do that only when i reach home.
Another thing i have noticed is that i am able to charge my defy....that means the rom is present and hopefully working !!
What say....???
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Euro your awesome!!
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
friend request !!
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Shrewdy said:
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
Click to expand...
Click to collapse
Hehehehehehehehe
You are Welcom Shrewdy
Say thanks to our awesome XDA developer's Because of them we are nothing...
Shrewdy said:
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Click to expand...
Click to collapse
Accepted :highfive:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
sorry didnt get you
czarekusa said:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
Click to expand...
Click to collapse
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Shrewdy said:
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Click to expand...
Click to collapse
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
czarekusa said:
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
Click to expand...
Click to collapse
Lots of us who had bootloops trying to flash CM10 24/09 with a BL5 base SBF solved the problem by flashing a BL6 base Froyo SBF.
But try a factory reset and flashing your stock T-Mobile Froyo first.
If your stock doesn't flash properly then it means you have inadvertently flashed something which updated your BL version to BL5.
I flashed the JDGC_U6.2.13.0 SBF which is BL6 and then I was fine.
Don't use this ROM though, just use it as a stepping-stone to install CM10.
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Thanks a lottt.. :highfive:
Hi, i have some questions about the 2ndboot updates. I had tested cm10 for a while now (but currently in cm7.2), but i got a little lost with this whole kernel update.
1st of all, in quarx page i don't see a "cm10-2ndboot-nightly-defy/" folder, just the one for defy+, this new builds are only for defy plus yet?, or there work on both devices?
and if they do, how sould i install them, do they change to 2ndboot by themselves or do i have to do it myself?
elpiole said:
Hi, i have some questions about the 2ndboot updates. I had tested cm10 for a while now (but currently in cm7.2), but i got a little lost with this whole kernel update.
1st of all, in quarx page i don't see a "cm10-2ndboot-nightly-defy/" folder, just the one for defy+, this new builds are only for defy plus yet?, or there work on both devices?
and if they do, how sould i install them, do they change to 2ndboot by themselves or do i have to do it myself?
Click to expand...
Click to collapse
They are for both and no change is required from your part in the bootmenu settings
I've tried flashing 10.11 and update.zip today, with no luck.
I first tried flashing over my original cm10 (9.12 - froyo kernel, on green lens) - wiped cache, then dalvik.
boot loops on red led
then i tried wiping all data/cache and flashing both again
same boot loops
next i tried flashing a new sbf (t mobile usa 2.1 updated to 2.2 - then rooted and 2ndinit)
now still waiitng at red led on boot, but no boot loops.
I have read the bootup time is very long the first time, but I've let it sit over 15 minutes, and tried a battery pull and let it sit another 15 minutes.
I am about to try again from nordic deblur 2.2 sbf
Am i doing something wrong? I'm not an expert at this stuff, but i'm usually pretty good about following directions. please help!
Amazing job again Quarx and everyone!
Start fresh; use the ultimate wiper for defy and flash cm11/10, and them flash only update v2
Sent from my MB526 using xda premium
tronjojo said:
I've tried flashing 10.11 and update.zip today, with no luck.
I first tried flashing over my original cm10 (9.12 - froyo kernel, on green lens) - wiped cache, then dalvik.
boot loops on red led
then i tried wiping all data/cache and flashing both again
same boot loops
next i tried flashing a new sbf (t mobile usa 2.1 updated to 2.2 - then rooted and 2ndinit)
now still waiitng at red led on boot, but no boot loops.
I have read the bootup time is very long the first time, but I've let it sit over 15 minutes, and tried a battery pull and let it sit another 15 minutes.
I am about to try again from nordic deblur 2.2 sbf
Am i doing something wrong? I'm not an expert at this stuff, but i'm usually pretty good about following directions. please help!
Amazing job again Quarx and everyone!
Click to expand...
Click to collapse
I think You've misundersttod my friend. There no long time of bootlooping. Theres a long first boot. Boot lopping shouldn't happen continuously.
Maybe following the steps below from a post on the defy general forum should help
nidhish91 said:
OOk guys so I found this thread which shows MS2 got a custom kernel. The proceduce is bit difficult but can be modified for working for Defy too.
Hope has struck back again.
http://forum.xda-developers.com/showthread.php?t=1908687
Update: 2ndboot module sources are here:
https://github.com/czechop/2ndboot
Quarx puts his kernel here:
quarx2k.ru
Sdcard symlink Fix:
http://forum.xda-developers.com/showpost.php?p=32428611&postcount=392
Thanks to walter.
-------------------------------------------------------------------------------------------------------------------------------
BIGNOTE: Green lens users who flashed redlens builds please dont try using flash, you will end up burning it like me and many others.
STEPS TO FOLLOW WHEN YOU HAVE BOOTLOOPS OR BLACK SCREEN WITH RED LED ON:
-1st of all set default boot to 2nd-boot
-Go to recovery and flash the 24.9 build
-Then flash the kernel 6.10
-After that flash the latest build
-Wait and you will have your phone working proper.
!
Click to expand...
Click to collapse
Also you cont just go down to a previous sbf version. Youve flashed a custom kernel. You would need to go to your standard kernel which you would find elsewhere. I think the CM10 faqs have the 525 and 526 kernels
i followed the same procedure as last time, but this time starting from the nordic deblur sbf and everything worked fine. no bootloops. long first boot time. If anyone tries this, do NOT use the official tmobile USA sbf. didn't work for me at all. I'm guessing that's why i had problems with 9/24 build as well.
Flashing nordic to workaround red led + black screen ?
tronjojo said:
i followed the same procedure as last time, but this time starting from the nordic deblur sbf and everything worked fine. no bootloops. long first boot time. If anyone tries this, do NOT use the official tmobile USA sbf. didn't work for me at all. I'm guessing that's why i had problems with 9/24 build as well.
Click to expand...
Click to collapse
Hi,
Your message rings a bell to me !
I have tried to flash cm10 18/10 + update_v4 on my Defy (green lens) but I have failed, I always get stuck on red led + black screen. Waiting or removing battery and retrying did not help. Wiping did not help either. I am coming from cm7, had never flashed cm9 or cm10 before, and before cm7 my phone was on french froyo stock rom 3.4.2-164.
Do you think I should try to flash another sbf, such as nordic deblur sbf as you did ?
Is your bootloop like that:
Splashscreen -> red LED + black screen -> Splashscreen -> red LED + black screen
If yes, you should think about upgrading your bootloader...
Had the same problem and was on BL5, some people in Support thread had the same prob on BL5...
So I flashed this chinese rom, rooted and upgraded to cm10 and everything worked fine for me.
Use this SBF just as a stepstone to CM10, because it may break your flashlight or ****.
Make sure you have snd-init on your sd, cause there is no gapps on the sbf...
well thats it...
esok44 said:
Is your bootloop like that:
Splashscreen -> red LED + black screen -> Splashscreen -> red LED + black screen
If yes, you should think about upgrading your bootloader...
Click to expand...
Click to collapse
In my case, it's not looping, it is stucked on red led + black screen.
did you wipe cache and dalvik?
or did you try a clean installation?
wich sbf was the last one you flashed?