Database Users

[Q] Stuck on HTC splashscreen

Hi there,
I know this seems like a total noob question, but I'm really desperate here. This was supposed to be my second ROM change. First I wanted to try Pyramid HTC WWE 1.35.401.1 - Real 3D [V1.7][RAF 1.9GB], but I got stuck on the HTC splashscreen, even though I followed the instructions very carefully. In the end I gave up and I found another ROM - [24 JUL][MAG/cLK] ..::: BPSense HD v2.2 :::.. [Sense 2.1][Raf's 1r9].
I've got HSPL 2.08, MAGLDR 1.13, radio ROM 2.15.50.14, partiton 160M, cache 5M, CWM 4.0 and everytime I try to boot, I got stuck again on the white screen with HTC logo.
It's not that I haven't tried to look up the answer in the forums, but nothing seems to help. Any advice?
Thank you very much.

Lucretat said:
Hi there,
I know this seems like a total noob question, but I'm really desperate here. This was supposed to be my second ROM change. First I wanted to try Pyramid HTC WWE 1.35.401.1 - Real 3D [V1.7][RAF 1.9GB], but I got stuck on the HTC splashscreen, even though I followed the instructions very carefully. In the end I gave up and I found another ROM - [24 JUL][MAG/cLK] ..::: BPSense HD v2.2 :::.. [Sense 2.1][Raf's 1r9].
I've got HSPL 2.08, MAGLDR 1.13, radio ROM 2.15.50.14, partiton 160M, cache 5M, CWM 4.0 and everytime I try to boot, I got stuck again on the white screen with HTC logo.
It's not that I haven't tried to look up the answer in the forums, but nothing seems to help. Any advice?
Thank you very much.
Click to expand...
Click to collapse
Hi,
It seems that you are following the correct order of things.
Have you partitioned your sd card?
Go to ad recovery>advanced>Partition SD Card.(1024 MB with 0 MB swap)Remember: ALL data on your SD Card will be erased!(Therefore,back it up)
After partitioning in CWM,go to ad recovery and wipe data,cache partition,and dalvik(advanced).

Also maybe use CWM 3.X.X.X? I heard somewhere that CWM 4 has bugs...

help with gingerbread installation!

Hello guys!! please could somebody help me!!.... i am trying to install android version nexus hd2-gingerbread v2.8(GRJ22)/Android 2.3.4 k tytung R10
I have installed the software on my sd card...after boot up i get a black screen with 'htc' in green...after that nothing seems to be happening!...please help anybody!!!!!
my phone has been recently updated by htc...so I am up to date with the radio..

Have you flashed the correct partition size?
The latest radio doesn't mean the best, but it should boot android.
How long have you waited before turning off/pulling battery out?

Hey guys
I've the same problem as OP, I wiped everything, including cache. But my phone keeps getting stucked at my ROM's splash screen.
Marvlesz, could Clockworkmod partitioning be the problem? I downloaded the 250 MB version for the newest coredroid ROM for HTC HD2, maybe I should flash the 400 MB version instead?
Thanks and I hope OP's problem can get fixed

Bysom said:
Hey guys
I've the same problem as OP, I wiped everything, including cache. But my phone keeps getting stucked at my ROM's splash screen.
Marvlesz, could Clockworkmod partitioning be the problem? I downloaded the 250 MB version for the newest coredroid ROM for HTC HD2, maybe I should flash the 400 MB version instead?
Thanks and I hope OP's problem can get fixed
Click to expand...
Click to collapse
for coredroid roms partition layout is:10-390-5

[Q] problem flashing pyramid

Hi there i have a problem flashing Pyramid HTC WWE 1.35.401.1 i wiped everything i have magldr and clk i used clk to partition my 2gb sd ext 2 1024 i used recovery for 5/180/5 but i always get error about image file on sd card 0 and sometimes it freezes to please waiting processing system, what am i dooing wrong please help

If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2

rauschkugl said:
If you really have magldr and clk that is the part you are doing wrong because they cannot be used both. You have to chose one of them. But i think you meant cwm instead of clk.
Is the image corrupted? You can try downloading and installing it again.
Sent from my HTC HD2
Click to expand...
Click to collapse
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong

bondocel said:
i have magldr 1.13 and its the 3rd time i try to flash and it freezes at processing system please waiting, i don't know where i'm going wrong
Click to expand...
Click to collapse
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App

langthang said:
You need wait about 20 minutes when you see processing system
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
OK it worked but now i'm stuck at htc quietly brilliant logo for about 15 mins what should i do?

Anyone pls help i know i'm doing something wrong but what ? I really want that rom

Is there a specific kernel or sofware i need to instal before flashing rom?

the kernel is included in the rom and you do not need anything else. if you flash the rom the way it's described in the thread everything should work.

I tryed installing other pyramid rom but the same frozen at logo screen, i waited for about an hour before i took out the battery ,when i bought the phone it had nexus one rom installed, it is thd only rom that works. Maybe i have wrong spl or radio ?

NexusHD2-CM9 broken!

Hey Guys!
I'm a bit new here, but I have register to become an answer to my question which I haven't found yet.
I've flashed my HD2 with tytung's "NexusHD2-ICS-4.0.3-CM9 V1.0" (with task29, radio reinstalled, hspl reinstalled, maglrd reinstalled & cwm reinstalled).
the problem is: after minutes of bootscreen I have to enter my Pin, I do.
There is given the text "Unlocking SIM" , while "he" do so, de screen turns black and I have to enter my Pin again and again. Sometimes he simply accept and go on, but then many process' crash! Process' like: android.process.acore , google.process.gapps, com.android.phone android keyboard ..
they all crash in a row and latest then I have to enter my Pin again.
Could anybody help me?

did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
I also have the issue that my phone stucks at the htc screen...i wait for 20 minutes now but nothing happens...i'll try to flash a bigger partition layout magldr...

Try the SD build
Hi, too bad you are having difficulty.
I am running the SD version of the same OS with do problem.
Two options:
Try the SD build:
http://forum.xda-developers.com/showthread.php?t=1437463
Just remember to rename the Folder to ICS, then tell MAGLDR to boot from SD / ICS
or try going back to a stable ROM, remove all PIN codes, then reinstall CM9
Good Luck

i have already removed all pin codes.
also i tried a full wipe with task29 and used the 250mb system partition because i read something about bad nand blocks.
earlier i tried to boot some sd builds that were made for boot with magldr, but without any success...if i go to the selection of the android sd folder in magldr it just pushes me back to magldr main menu :/
my hd2 is difficult to understand because it doesn't work as others do >.<

RichieGKB said:
did you try to reflash the rom?
go to recovery, wipe data/factory reset & advanced -> wipe dalvik cache
after that, install the rom again.
Click to expand...
Click to collapse
First: thanks, that there are people which consider to be with me with my problem
yea, i've already reflashed the rom (felt like 20 times!) ..
and I've actually tried to install no sd-version, I kept it as a loophole. ^^
Situation now: I've simply ignored the messages that every important process is going to die and just clicked the failures away. after that he wants to reboot, to get access to the mobile network --- I click "Reboot" und have now a Bootloop ...

i also tried another ics rom without cm9 and got the bootloop at the first boot...
I dont understand why no rom is running on my phone...

So guys !
I've done it ;D
Have simply used the sd-version and it works great!
@RichieGKB: If you have any question to the sd-version, message me !

Good post Charles, it helps me.
Seems to helps you too guys. Don't forget to hit thanks button!

i tried the full wipe and also a larger system and cache partition to get the rom working, but it still doesn't on nand.
I'm downloading the sd version at the moment, but this can't be the solution for the future :/
maybe i have to wait for newer versions of this rom

ah I solved the problem.
I didn't change the system partition layout in recoverys .cfg file. I didn't know that i have to do this because i thought it would be enough to install another version of magldr

@weedstar: Thats not the problems solution.. next time try to fix permissions via CWM. Sd version is slow. Nand is better.
Hf
Sent from my NexusHD2

[Q] Stuck on boot logo MIUI - MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]

Hi everybody.
Has anybody esle problem with stuck on boot logo MIUI after flashing MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]?
I have been used the MIUI 4 by smokin for 2 months without any problems. Every week I was able to flash it without stuck on boot logo.
I was trying to make a clean install (as always):
1. Wipe (Task 29)
2. Instal clk 1.5
3. Check partition size (220/5)
4. Flash MIUI 2.6.8
5. without reboot install Bootloopfix 2.6.8
6. clear dalvik cache (as it appears after installing bootloopfix)
6. Reboot - and then my phone get stuck on boot logo MIUI (I left the phone like that for 30 minutes without no succes).
Did I miss something important?
I also tried to flash radio version again: Leo_RADIO_2.15.50.14, but it did not help. When I got back to 2.6.1-2 MIUI - everything is just fine.
Thanks for any advice what else can I try.

peto.zalesak said:
Hi everybody.
Has anybody esle problem with stuck on boot logo MIUI after flashing MIUI ICS 2.6.8 Ported by smokin901 [tytung r3 HWA]?
I have been used the MIUI 4 by smokin for 2 months without any problems. Every week I was able to flash it without stuck on boot logo.
I was trying to make a clean install (as always):
1. Wipe (Task 29)
2. Instal clk 1.5
3. Check partition size (220/5)
4. Flash MIUI 2.6.8
5. without reboot install Bootloopfix 2.6.8
6. clear dalvik cache (as it appears after installing bootloopfix)
6. Reboot - and then my phone get stuck on boot logo MIUI (I left the phone like that for 30 minutes without no succes).
Did I miss something important?
I also tried to flash radio version again: Leo_RADIO_2.15.50.14, but it did not help. When I got back to 2.6.1-2 MIUI - everything is just fine.
Thanks for any advice what else can I try.
Click to expand...
Click to collapse
Due to Bad NAND blocks which your phone might have, you have less than 220mb when you partition your internal memory. So when partitioning, make a partition of say maybe 230 or 235mb so as to account for the bad NAND blocks
Hope it helps

OK - thank you very much for your advice . I will try it after I get back from work.
Another question is - is there any solution or method, how to check, if my phone really has bad NAND blocks or not? Or maybe - what is causing this bad NAND blocks?
Anyway - I will try it. Thank you very much for the tip.

i prefer this way. you can try if you want.
sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb. insert it to your device.
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6 or clk
5. clear cache and dalvik cache.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

peto.zalesak said:
OK - thank you very much for your advice . I will try it after I get back from work.
Another question is - is there any solution or method, how to check, if my phone really has bad NAND blocks or not? Or maybe - what is causing this bad NAND blocks?
Anyway - I will try it. Thank you very much for the tip.
Click to expand...
Click to collapse
You can search the forum for bad NAND blocks. I dont have alot of time currently so i didnt post the link. But will do later
powerofthink said:
i prefer this way. you can try if you want.
sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb. insert it to your device.
1. task29
2. radio rom 2.15.50.14
3. magldr 1.13
4. recovery 5.0.2.6 or clk
5. clear cache and dalvik cache.
this is the HD2 Toolkit ; http://www.mediafire.com/?2qz0xa7xfxney47
this is the radio 2.15.50.14 ; http://www.mediafire.com/?1th8o158r2t6dba
Click to expand...
Click to collapse
And this will help HOW?
The person has already tried the clean installation. How will doing it again help?

Thanks for any advice, I found some threads,
e.g. http://forum.xda-developers.com/showthread.php?t=1189544.
I am going to study, what should I do to check nand blocks on my hd2.

[Solved]
Thanks everybody for tips, I probably (as a lot of people do) have some bad blocks.
Anyway, I just cut out some application from ROM before flashing and flashed the rom even with lower (200 mb) partition.
But your ideas led me to stuff like bad blocks etc, so now I am able to understand things better and know that flashing too much can cause trouble....
Sent from my HTC HD2 using XDA